Deep eutectic solvent promoted highly efficient synthesis of N,N’-diarylamidines and formamides

A deep eutectic solvent was used as a dual catalyst and reaction medium for the efficient N-formylation of aromatic amines without hazardous organic solvent and catalyst. Treatment of aromatic amines with trimethyl orthoformate and formic acid in deep eutectic solvent at 70 °C gives the corresponding N-formyl derivatives in good to excellent yields. This simple ammonium deep eutectic solvent, easily synthesized from choline chloride and SnCl₂, with 100% atom economy and making it applicable to industry and laboratory. Furthermore, heating the trimethyl orthoformate and aromatic primary amines in the deep eutectic solvent results in formation of the corresponding N,N’-diarylamidines in high yields.     

Nickel(0)/N-heterocyclic carbene complexes catalysed arylation of aromatic diamines

Nickel complexes of N-heterocyclic carbenes were examined for effecting C–N coupling reactions between aromatic diamines and aryl chlorides of varying electron density. The Ni(0) · 2IPr (IPr = N,N′-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) complex associated to t-BuONa allowed N,N′-diarylation at 100 °C in 1,4-dioxane with excellent yields. Selective monoarylation of diamines could be performed in THF at 65 °C.     

Excess volumes of mixing in (N,N-dimethylacetamide + methanol + water) and (N,N-dimethylacetamide + ethanol + water) at the temperature 313.15 K

Precise excess volumes of mixing measurements at T = 313.15 K are reported over the whole composition range for binary mixtures: (N,N-dimethylacetamide + water), (N,N-dimethylacetamide + methanol), (N,N-dimethylacetamide + ethanol) and for the ternary mixtures (N,N-dimethylacetamide + methanol + water) and (N,N-dimethylacetamide + ethanol + water). For all the systems, large negative deviations from ideality are observed. The binary results have been fitted using the Redlich–Kister type polynomial. The possibility of predicting the ternary results from the binary ones was examined.     

Uranium(VI) bis(imido) disulfonamide and dihalide complexes: Synthesis density functional theory analysis

Novel cis- and trans-bis(imido) uranium disulfonamide derivatives have been prepared from iodide metathesis reactions between two equivalents of K[N(Me)(SO₂Ar’)] (Ar’ = 4-Me-C₆H₄) and U(N^tBu)₂(I)₂(L)_x (L = OPPh₃, x = 2; Me₂bpy, x = 1; Me₂bpy = 4,4’-dimethyl-2,2’-bipyridyl). These bis(amide) derivatives serve as useful precursors for the synthesis of the trans-diphenolate complex U(N^tBu)₂(O-2-^tBuC₆H₄)₂(OPPh₃)₂ (5), cis- and trans-dithiolate complexes U(N^tBu)₂(SPh)₂(L)_x (L = OPPh₃ (6); Me₂bpy (7)), and cis- and trans-dihalide complexes with the general formulas U(N^tBu)₂(X)₂(L)_x (X = Cl, L = OPPh₃ (8), L = Me₂bpy (10); X = Br, L = OPPh₃ (9), L = Me₂bpy (11)). DFT calculations performed on the trans-dihalide series U(N^tBu)₂(X)₂(L)₂ and the UO₂²⁺ analogues UO₂X₂(OPPh₃)₂ suggest that the uranium centers in the [U(N^tBu)₂]²⁺ ions possess more covalent character than analogous UO₂²⁺ derivatives but that the U-X bonds in the U(N^tBu)₂X₂L₂ complexes possess a more ionic nature.     

Preparation of isoxazolidinyl nucleoside enantiomers by lipase-catalysed kinetic resolution

An efficient biocatalytic procedure to obtain chiral N,O-nucleoside derivatives consisting of a lipase-catalysed resolution of the corresponding racemates in organic solvent has been developed. Enantioselective esterification of thymine and cytosine derivatives, (±)-9a and (±)-9b, has been investigated by comparing the efficiency of different lipases and acyl donors. Since esterification of (±)-9a and (±)-9b, occurred with low enantioselectivity (E ? 14) in the presence of the lipases considered, for preparative purposes we resorted, with success, to a double sequential kinetic resolution, using Lipozyme IM as the best catalyst. This approach enables us to obtain all the enantiomers with ee ? 95%. The absolute configuration of the new chiral N-acetyl cytosine derivative 9b was established by circular dichroism spectroscopy.     

Organocatalytic chemoselective monoacylation of 1,n-linear disulfonamides

Predominant monoacylation of 1,n-linear disulfonamides took place in the presence of pyrrolidinopyridine-type organocatalysts when the chain length of the linear disulfonamides was n = 3, 4, or 5 (monoacylate/diacylate = up to 44). The chemoselectivity of the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and N,N′-ditosyl-1,3-propanediamine (n = 3) was found to be 36, favoring the former substrate. Different chain length by only one carbon atom was discriminated in the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and of N,N′-ditosyl-1,4-butanediamine (n = 4) with the relative acylation rate of 16 in the presence of the organocatalyst.     

Thermochemical properties of 4-N,N-dialkylamino-7-nitrobenzofurazan derivatives (alkyl = methyl,ethyl)

The standard (p° = 0.1 MPa) molar enthalpies of formation, at T = 298.15 K, in the gaseous phase, for two nitrobenzofurazan derivatives, 4-N,N-dimethylamino-7-nitrobenzofurazan (DMANBF) and 4-N,N-diethylamino-7-nitrobenzofurazan (DEANBF), were derived from their enthalpies of combustion and sublimation, obtained by static bomb calorimetry and by the Knudsen effusion technique, respectively. The results are compared with the corresponding data calculated by the G3(MP2)//B3LYP approach. Computationally, the molecular structures of both compounds were established and the geometrical parameters were determined at the B3LYP/6-31G(d) level of theory.     

(Vapour + liquid) equilibrium in (N,N-dimethylacetamide + ethanol + water) at the temperature 313.15 K

Total vapour pressures, measured at the temperature 313.15 K, are reported for the ternary mixture (N,N-dimethylacetamide + ethanol + water), and for binary constituent (N,N-dimethylacetamide + ethanol). The present results are also compared with previously obtained data for (amide + ethanol) binary mixtures, where amide = N-methylformamide, N,N-dimethylformamide, N-methylacetamide, 2-pyrrolidinone, and N-methylpyrrolidinone. We found that excess Gibbs free energy of mixing for binary (amide + ethanol) mixtures varies roughly linearly with the molar volume of amide.     

Thermochemistry of Cu(II) and Ni(II) complexes with N,N-di-n-butyl-N′-thenoylthiourea and N,N-di-iso-butyl-N′-thenoylthiourea

Two substituted N-acylthioureas and the respective Ni(II) and Cu(II) complexes were synthesized, namely: N,N-di-n-butyl-N′-thenoylthiourea (Hnbtu); N,N-di-iso-butyl-N′-thenoylthiourea (Hibtu); bis[N,N-di-n-butyl-N′-thenoylthioureato]nickel(II), [Ni(nbtu)₂]; bis[N,N-di-n-butyl-N′-thenoylthioureato]copper(II), [Cu(nbtu)₂]; bis[N,N-di-iso-butyl-N′-thenoylthioureato]nickel(II), [Ni(ibtu)₂]; bis[N,N-di-iso-butyl-N′-thenoylthioureato]copper(II), [Cu(ibtu)₂]. The standard (p^° = 0.1 MPa) molar enthalpies of formation and sublimation of the two N-acylthioureas were measured, at T = 298.15 K, by rotating-bomb combustion calorimetry and Calvet microcalorimetry, respectively. The standard (p^° = 0.1 MPa) molar enthalpies of formation of the Ni(II) and Cu(II) complexes were determined, at T = 298.15 K, by high precision solution–reaction calorimetry. From the results obtained, the enthalpies of hypothetical metal–ligand and metal–metal exchange reactions, in the gaseous phase, were derived, thus allowing a discussion of the gaseous phase energetic difference between the complexation of Ni(II) and Cu(II) to 1,3-ligand systems with (S,O) ligator atoms.     

Liquid–liquid equilibrium in ternary systems N,N-dimethylformamide + 2-methylpentane + methanol and N,N-dimethylformamide + methylcyclohexane + methanol

In the present paper, a study of temperature behaviour of the liquid–liquid equilibrium in ternary systems N,N-dimethylformamide + 2-methylpentane + methanol and N,N-dimethylformamide + methylcyclohexane + methanol. The analysis of critical curves of the liquid–liquid equilibrium by means of the regular solution model was carried out. The acquired predictions were subsequently verified experimentally.     

Design,synthesis and antimycobacterial activity of novel nitrobenzamide derivatives

We report herein the design and synthesis of a series of novel nitrobenzamide derivatives. Results reveal that many of them display considerable in vitro antitubercular activity. Four N-benzyl or N- (pyridine-2-yl)methyl 3,5-dinitrobenzamides A6, All, Cl and C4 have not only the same excellent MIC values of0.016 μg/mL against both drug-sensitive MTB strain H37 Rv and two drug-resistant clinical isolates as PBTZ169 and the lead 1, but also acceptable safety indices (SI 1500), opening a new direction for further development.     

Efficient synthesis of 2,6,7,8-tetrahydroxyindolizidines (castanospermine analogues) via the dipolar cycloadditions of N-benzyl-C-(tetrofuranos-4-yl)nitrones to methyl acrylate

The dipolar cycloaddition of (Z)-N-benzyl-(3-O-benzyl-1,2-O-isopropylidene-α-d-ribofuranos-5-ylidene)amine N-oxide to methyl acrylate gives a 53:16:26:5 diastereomeric mixture of isoxazolidine derivatives. The dipolar cycloaddition of the xylo analogue to methyl acrylate is more diastereoselective, producing a 44:13:43 mixture of only three diastereomers. The ribo-configured adducts have been converted (4 steps only) into the new (2R,6S,7S,8R,8aR)-, (2S,6S,7S,8R,8aR)-, (2S,6S,7S,8R,8aS)- and (2R,6S,7S,8R,8aS)-2,6,7,8-tetrahydroxyindolizidines. Similarly, the two xylo-configured major isoxazolidine derivatives were converted into the known derivatives (2R,6S,7R,8R,8aS)- and (2S,6S,7R,8R,8aR)-2,6,7,8-tetrahydroxyindolizidines. The six isomeric indolizidine derivatives obtained have been evaluated for their inhibiting activities towards 15 glycosidases. Only the (2R,6S,7S,8R,8aR)-configured isomer is a selective inhibitor of amyloglucosidases from Aspergillus niger (IC₅₀ = 350 μM) and from Rhizopus mold (IC₅₀ = 90 μM, K_i = 195 μM, non-competitive), the other indolizidines show very little inhibitory activity at 1 mM concentration.     

Study of the stability of 5,10,15,20-tetraphenylporphine (TPP) and metalloporphyrins NiTPP,CoTPP, CuTPP,and ZnTPP by differential scanning calorimetry and thermogravimetry

In this work, the stability of 5,10,15,20-tetraphenylporphine (TPP) and its metallic derivatives, NiTPP, CoTPP, CuTPP, and ZnTPP has been studied through differential scanning calorimetry and thermogravimetry. The decomposition temperatures are (712, 710, 708, 702, and 671) K for NiTPP, CoTPP, CuTPP, ZnTPP, and TPP, respectively. These values are in correspondence with the N–M bond length d_M–N, of the metalloporphyrins. The corresponding molar enthalpies of melting Δ_fusH_m, were determined as (58, 57, 55, 52, and 44) kJ · mol^?1 for the same series. These values are discussed in terms of the crystallographic features in the solid state.     

Structure and magnetic properties of a novel copper diphosphonate with pillared layered structure:: Cu2(H2O)2{O3PCH2N(C2H4)2NCH2PO3}

Compound Cu₂(H₂O)₂{O₃PCH₂N(C₂H₄)₂NCH₂PO₃} (1) has a pillared layered structure in which the organic groups of N,N′-piperazinebis(methylenephosphonate) are sandwiched between the inorganic layers. Compared with other copper phosphonates with layered or pillared layered structures, the inorganic layer in 1 is unique in that each {CPO₃} tetrahedron is corner-shared with three {CuO₄N} square pyramids through three oxygen donors. Ferromagnetic interactions are mediated between the metal centers. Crystal data: Pbca, a=10.0830(16) Å, b=9.4517(15) Å, c=13.218(2) Å, V=1259.7(3) Å³, Z=4.     

Hydrothermal synthesis and characterization of a new organically templated three-dimensional open-framework gallium phosphate–phosphite (C6N2H18)2(C6N2H17)Ga15(OH)8(PO4)2(HPO4)12(HPO3)6·2H2O

Using H₃PO₃ as a phosphorus source and oxalic acid as a reducing agent, the first three-dimensional open-framework gallium phosphate–phosphite formula as (C₆N₂H₁₈)₂(C₆N₂H₁₇)Ga₁₅(OH)₈(PO₄)₂(HPO₄)₁₂(HPO₃)₆·2H₂O (1), has been hydrothermally synthesized in the presence of N,N,N′,N′-tetramethylenediamine (TMEDA) as a structure-directing agent. Compound 1 crystallizes in trigonal system with space group P ? 3, a = b = 19.046(3) Å, c = 8.3306(17) Å, γ = 120°, V = 2617.1(7) Å³, and Z = 1. Its 3-D network is based on alternated Ga-centered (GaO₄ tetrahedra, GaO₅ trigonal bipyramids, and GaO₆ octahedra) and P-centered (PO₄^3?, HPO₄^2?, and HPO₃^2?) units. Protonated organic amines and water molecules are located in the 12-membered ring channels.     

Adducts of rhodium(II) tetraacylates with methionine and its derivatives: 1H and 13C nuclear magnetic resonance spectroscopy and chiral recognition

Complexation of rhodium(II) dimeric tetraacylates: tetraacetate Rh₂AcO₄, tetratrifluoroacetate Rh₂TFA₄ , and (S)-Mosher’s acid salt Rh₂MTPA₄ with both enantiomerically pure and racemic methionine and its derivatives: hydrochloric salt of methionine, hydrochloric salt of methionine methyl ester, N-formyl methionine, N-phthaloyl methionine, N-phthaloyl methyl ester of methionine, and methyl ester of N,N-dimethylmethionine has been investigated by means of ¹H and ¹³C nuclear magnetic resonance (¹H and ¹³C NMR) and absorption electronic spectroscopy in the visible range. Complexation processes were investigated in D₂O or CDCl₃ solutions, depending on the ligands’ and rhodium salts’ solubilities. Some supporting measurements were performed in the solid phase, using ¹³C and ¹⁵N CPMAS NMR techniques.All ligands investigated form 1:1 and 1:2 adducts in the solution, depending on the rhodium salt to ligand molar ratios. The complexation site in the ligands (S atom) was deduced on the basis of the NMR parameter adduct formation shift (Δδ = δ_adduct ? δ_ligand) and calculated chemical shifts (DFT, NMR GIAO). In the cases of the Rh₂TFA₄ and Rh₂MTPA₄ adducts, decreasing the temperature within the range 220–254 K slowed down the ligand exchange and allowed us to observe the signals of all diastereoisomers in the ¹H and ¹³C NMR spectra.     

Quantitation of amino acids in plasma by high performance liquid chromatography: Simultaneous deproteinization and derivatization with 9-fluorenylmethyloxycarbonyl chloride

This paper, as a novelty to this field, presents the deproteinization and derivatization of plasma's free amino acids (PFAAs), simultaneously, in a single step, with the acetonitrile (ACN) containing 9-fluorenylmethyloxycarbonyl chloride (FMOC) reagent. Deproteinization and derivatization, were studied with 22 amino acids, applying photodiode array (DAD) and fluorescence (FL) detection, simultaneously. Model investigations have been carried out as a function of the FMOC concentration, reaction time and reaction conditions: with standard solutions, with human plasma samples in its initial condition and fortified with standard amino acids (excluding tryptophan because it co-elutes with the hydrolyzed FMOC). Reproducibilities of 22 amino acids, including both histidine and tyrosine derivatives, obtained under optimum derivatization conditions are presented (at 3.0 mM FMOC concentration, at pH 9; derivatization time = 20 min), and characterized with the relative standard deviation percentages of their responses (≤4.4%, RSD). Quantitation limit (LOQ) of amino acid FMOC derivatives proved to be 2.5 pmol, except for cystine, ornithine (5 pmol) and for the total of tyrosines (N-FMOC-tyrosine and N,O-FMOC-tyrosine 10 pmol).     

Spin density distribution in oxamato-type transition metal complexes

The spin density distribution of the paramagnetic [ⁿBu₄N]₂[Cu(dana)] dana = N,N′-(naphthalene-2,3-diyl)-bis(oxamato) has been derived from angular dependent electron paramagnetic resonance measurements at room temperature. The results indicate a noticeable spin density transfer from the central metal to the coordinated N and O atoms. Quantum chemical studies using density functional theory reinforce the results.     

Synthesis and crystal structure of the first chain-type nitridosilicates RE5Si3N9 (RE = La,Ce)

The novel branched chain-type nitridosilicates Ce₅Si₃N₉ and La₅Si₃N₉ have been synthesized in a radio-frequency furnace starting from the respective metals and silicon diimide Si(NH)₂ at 1625 °C for La₅Si₃N₉ and 1650 °C for Ce₅Si₃N₉, respectively. The structure of Ce₅Si₃N₉ has been determined by single-crystal X-ray diffraction (Ce₅Si₃N₉, Cmca (no. 64), a = 10.567(2) Å, b = 11.329(2) Å, c = 15.865(3) Å, V = 1899.3 Å³, Z = 8, R₁ = 0.0391, 1480 independent reflections, 90 refined parameters). The structure of isotypic La₅Si₃N₉ has been refined by the Rietveld method, starting from single-crystal data of Ce₅Si₃N₉ (La₅Si₃N₉, Cmca (no. 64), a = 10.647(4) Å, b = 11.414(4) Å, c = 16.030(5) Å, V = 1948.1 Å³, Z = 8, R_P = 0.0348, R_F² = 0.0533). Both compounds are built up of alternating Q²- and Q³-type corner sharing SiN₄ tetrahedra with additional corner sharing Q¹-units attached to the Q³-tetrahedra pointing alternately in opposing directions. These zipper-like chains are intertwined in both directions perpendicular to the chain itself to form a three-dimensionally interlocked structure with the rare-earth ions situated between the chains. Magnetic measurements resulted in a ferromagnetic ground state with a magnetic moment in agreement with Ce³⁺.     

Excess Gibbs energies and excess molar volumes for binary mixtures: (2-pyrrolidone + water), (2-pyrrolidone + methanol), and (2-pyrrolidone + ethanol) at the temperature 313.15 K

Total vapour pressures and excess molar volumes, measured at the temperature 313.15 K, are reported for three binary mixtures (2-pyrrolidone + water), (2-pyrrolidone + methanol) and (2-pyrrolidone + ethanol). The results are compared with previously obtained data for binary mixtures (amide + A), where amide=N-methylformamide, N,N-dimethylformamide and N-methylacetamide, and A= water, methanol, and ethanol.