Regioselective synthesis of novel spiroindane-1,3-diones through 1,3-dipolar cycloaddition reactions

A facile synthesis of novel spiroindane-1,3-diones has been achieved via 1,3-dipolar cycloaddition of an azomethine ylide, generated in situ from ninhydrin and 1,2,3,4-tetrahydroisoquinoline, with the conjugated double bond of chalcone derivatives. The regiochemistry and structures of the cycloadducts were determined with spectroscopic data and by X-ray crystal structure analysis.     

Unexpected opening of benzimidazole derivatives during 1,3-dipolar cycloaddition

Hydroxylamine hydrochloride adds via a Michael reaction on the acetonylidene moiety of (4Z)-(2-oxopropylidene)-1,2,4,5-tetrahydro-2H-1,5-benzodiazepin-2-one, leading only to 2-[(5-methyl-isoxazol-3-yl)]methyl]benzimidazoles. This report describes the difference of reactivity of C-phenyl-N-phenyl formohydrazonoyl chloride with benzimidazole. For the N-substituted benzimidazole, an unexpected opening of the azole ring occurs, which was confirmed by single crystal X-ray diffraction analysis.     

A facile synthesis of pyrazoles with multi-point structural diversity by 1,3-dipolar cycloaddition

We describe the synthesis of diverse pyrazoles by 1,3-dipolar cycloaddition of ethyl diazoacetate with various acetylenes in refluxing toluene. The product pyrazoles are useful starting points for preparing a diverse collection of trisubstituted pyrazole carboxamides. For aryl and heteroaryl alkynes a single product is obtained while alkyl alkynes afford a ca. 6:1 mixture of regioisomers. The observed regioselectivity for the cycloaddition step and the ease of reaction are consistent with predictions derived from computing the HOMO-LUMO energies of the reactants.     

Regioselectivity in the 1,3-dipolar cycloaddition of nitrile oxides to 3,3-methylene-5,5-dimethyl-2-pyrrolidinone

Summary Nitrile oxides add regioselectively to the carbon-carbon double bond of 3,3-methylene-5,5-dimethyl-2-pyrrolidinone (1), giving exclusively spiro-isoxazolines: 3-aryl-6-oxo-8,8-dimethyl-1-oxa-2,7-diazaspiro[4.4]non-2-enes3 a–l. The regiochemistry of the 1,3-dipolar cycloaddition to 1 seems to be controlled by the steric effect of the methyl groups at the ring junction and by frontier orbital interactions.Part XXV in the series 1,3-Dipolar Cycloaddition on Heterocycles. Part XXIV Ref. [10]     

A facile and regioselective synthesis of rimonabant through an enamine-directed 1,3-dipolar cycloaddition

Rimonabant is a high-potency cannabinoid type-1 (CB₁) receptor inverse agonist that has recently been approved in the European Union as a treatment for obesity. Current methods of synthesis require several steps that have long reaction times and/or lack regioselectivity. Here we present a novel, regioselective synthesis of rimonabant though an enamine-directed 1,3-dipolar cycloaddition. In addition, we present a new and more reactive hydrazonoyl halide for the generation of the requisite nitrile imine dipole.     

A facile regioselective 1,3-dipolar cycloaddition protocol for the synthesis of new class of quinolinyl dispiro heterocycles

The 1,3-dipolar cycloaddition reaction of azomethine ylides generated in situ from isatin and secondary amino acids with quinolinyl dipolarophiles in refluxing methanol afforded new class of quinolinyl dispiro heterocycles with multi hetero core units. The regio and stereochemistry of the product was unambiguously assigned by ¹H, ¹³C, 2D NMR techniques and single crystal X-ray analysis. The structures of the compounds are stabilized through the presence of intermolecular hydrogen bonding and intramolecular non-covalent interactions.     

One-pot,five-component 1,3-dipolar cycloaddition: A facile synthesis of spiropyrrolidine and spiropyrrolizidine derivatives

A one-pot, five-component strategy toward the synthesis of new indole substituted pyrrolidine and pyrrolizidine heterocycles through 1,3-dipolar cycloaddition reactions using ninhydrin, 1,2-phenylenediamine, amino acids, 3-cyanoacetyl indoles and aryl aldehydes is described. The features of this procedure were characterized by the mild reaction conditions, high yields, one-pot procedure, and operational simplicity.     

Regioselective synthesis of 5-trifluoromethyl-1,2,3-triazole nucleoside analogues via TBS-directed 1,3-dipolar cycloaddition reaction

Herein described was a straightforward method for the highly regioselective synthesis of 5-trifluoromethyl-1,2,3-triazole nucleoside analogues, which featured the utilization of tert-butyldimethylsilyl (TBDMS) group as the directing group in the 1,3-dipolar cycloaddition reactions. 4-tert-Butyldimethylsilyl-5-trifluoromethyl-1,2,3-triazole nucleoside analogues were generated as the only cycloaddition products in moderate yields (15-79%) via the treatment of glycosyl azides with 3,3,3-trifluoro-1-tert-butyldimethylsilylpropyne 1 in toluene at 85 °C. Removal of TBS groups in these triazole cycloadducts with tetrabutylammonium fluoride (TBAF) smoothly afforded the various 5-trifluoromethyl-1,5-disubstituted 1,2,3-triazole nucleoside analogues in good yields (40-88%).     

Novel asymmetric synthesis of spiroindene-1,3dione-pyrrolidines via CoII/amino acids complex catalysed asymmetric 1,3-dipolar cycloaddition of azomethine ylides and 2-arylidenindane-1,3-diones

Cobalt II(l-phenylalanine)₂ was used effectively for the first time in a catalytic asymmetric 1,3-dipolar cycloaddition of azomethine ylides with 2-arylidenindane-1,3-diones, affording a series of novel spiropyrrolidine derivatives with good to high yields (up to 90%), excellent diastereoselectivities (only exo’-3 were detected), and good enantioselectivities (up to 87%?ee).     

Direct construction of novel dispiro heterocycles through 1,3-dipolar cycloaddition of azomethine ylides

The 1,3-dipolar cycloaddition of 2-oxo-(2H)-acenaphthylen-1-ylidene-malononitrile and 2-fluoren-9-ylidene-malononitrile as dipolarophiles have been investigated for the first time with the azomethine ylides generated in situ from N-substituted isatin and sarcosine to furnish novel dispiro heterocycles. The structure and relative stereochemistry of both types of cycloadducts were confirmed by single crystal X-ray diffraction, as well as with the help of ¹H, ¹³C, and HMBC spectroscopic methods.     

Tricyclic-isoxazolidine analogues via intramolecular 1,3-dipolar cycloaddition reactions of nitrones

The tricyclic-isoxazolidine analogues tetrahydrothiochromenoisoxazoles, hexahydroisoxazolequinolines and tetrahydroisoxazolepyranopyridines were prepared by an intramolecular 1,3-dipolar cycloaddition reaction of a nitrone with an alkene. For N-alkylated hexahydroisoxazolequinolines, reduction of the reaction time from two days to 40 min was achieved using microwave heating. The cyclization to form tetrahydroisoxazolepyranopyridines only proceeded when the alkene was substituted with an electron withdrawing group.     

Selectivities in the 1,3-dipolar cycloaddition of nitrile oxides to dicyclopentadiene and its derivatives

The 1,3-dipolar cycloaddition of nitrile oxides, generated from aldoximes and nitroalkanes, to dicyclopentadiene proceeds with complete chemo- and stereoselectivity. The approach of the dipole takes place exclusively from the exo-face of the bicycloheptane moiety providing a mixture of regioisomers in approximately 55:45 ratio. On the other hand, nitrile oxide cycloaddition to dimethyldicyclopentadiene dicarboxylate (Thiele's ester), besides exhibiting chemo- and stereoselectivity as in the case of dicyclopentadiene, exhibits complete regioselectivity as well providing a single isomer in good yield. The Influence of remote substituents, including sterically ‘sterile’ ones, on the regioselectivity has also been investigated using 8-hydroxy and 1-keto derivatives of dicyclopentadiene. These experimental observations have been investigated through gas phase and solvent model MO calculations on the transition state geometries at semiempirical (PM3) and hybrid ab initio-DFT levels of theory. The Computational methods employed in this study were rigorously tested by performing model calculations on well-established experimental observations.     

Efficient method for the synthesis of 1,2,3-triazole functionalized isoxazolidine derivatives by 1,3-dipolar cycloaddition of nitrones with terminal olefins

1-Phenyl-1,2,3-triazole-4-carbaldehyde 1 was treated with different N-alkyl hydroxylamine hydrochlorides 2 using NaHCO₃ to obtain 1,2,3-triazole substituted N-alkyl nitrones 3a–c. The nitrones 3a–c were further reacted with different substituted olefins and furnished 2-alkyl-3-(1-phenyl-1H-1,2,3-triazol-4-yl)-5-(substituted)isoxazolidine derivatives 4a–p in high yields via 1,3-dipolar cycloaddition reaction.     

Ruthenium-catalyzed 1,3-dipolar cycloaddition of trifluoromethylated propargylic alcohols with azides

The 1,3-dipolar cycloaddition of trifluoromethylated propargylic alcohols 1 with azides in the presence of catalytic [Cp*RuCl₂]_n afforded exclusively 4-trifluoromethyl-1,4,5-trisubstituted-1,2,3-triazoles 2 in high yields.     

A sort synthesis of polyhydroxylated pyrrolizidines via sequential 1,3-dipolar cycloaddition and reductive amination

Polyhydroxylated pyrrolizidines bearing a methyl group at C-5 have been synthesized by 1,3-dipolar cycloaddition of five membered cyclic nitrones with methyl vinyl ketone followed by a N–O reductive cleavage and in situ intramolecular reductive amination. The stereochemistry of the obtained compounds is examined in relation to the reactions mechanism.     

Stereoselective preparation of 1,2,4-oxadiazole derivatives substituted by pentafluorophenyl by 1,3-dipolar cycloaddition reaction

1,3-Dipolar cycloaddition reactions of chiral imines obtained from optically active amino acids with nitrile oxides afforded 1,2,4-oxadiazole derivatives in moderate to good yields with good stereoselectivity. Investigation on the effect of bases suggested that triethylamine was prone to afford better stereoselectivity, while NaHCO₃ was prone to increase the reaction rates and yields.     

Synthesis of ethyl 3-phenyl-4-(trifluoromethyl)isoxazole-5-carboxylate via regioselective dipolar cycloaddition

Efforts to prepare ethyl 3-phenyl-4-(trifluoromethyl)isoxazole-5-carboxylate (1) by developing a regioselective 1,3-dipolar cycloaddition between phenyl nitrile oxide and various 4,4,4-trifluoromethyl crotonates are described. The substitution at the C2-position of crotonate dipolarophile 4 significantly influenced the regiochemistry and yield of the cycloaddition. Enol and enol ether-based crotonates underwent regioselective cycloadditions with phenyl nitrile oxide to provide 4-trifluoromethyl isoxazoles in good yields.     

Three-component couplings for the synthesis of pyrroloquinoxalinones by azomethine ylide 1,3-dipolar cycloaddition chemistry

1-Methyl-3,4-dihydroquinoxalin-2(1H)-one was heated with a range of aldehydes to generate intermediate azomethine ylides which underwent [3 + 2] cycloaddition reactions with N-methyl or N-phenylmaleimide to give substituted tetrahydropyrroloquinoxalinones. Only one (racemic) stereoisomer was formed in each case and the stereochemical outcome was verified by single crystal X-ray analysis. The products from this multicomponent reaction could be oxidised with DDQ to the pyrroloquinoxalinones.     

Diastereoselective synthesis of 2,3,4,5-tetrasubstituted isoxazolidines via 1,3-dipolar cycloaddition

The 1,3-dipolar cycloaddition reactions of α-2-methoxyaryl nitrones with nitrostyrenes and chalcones have been investigated. The regiochemistry and stereochemistry of the resultant cycloadducts have been determined with the help of NMR spectroscopy and X-ray analysis. β-Nitrostyrenes add to nitrones to give two geometrical isomers, while the β-methyl-β-nitrostyrene gives a single isomer in relatively low yield. The chalcones give a single cycloadduct upon 1,3-dipolar addition.     

Efficient and rapid synthesis of regioselective functionalized potassium 1,2,3-triazoletrifluoroborates via 1,3-dipolar cycloaddition

In this study, we present a previously unreported method of preparing regiospecific organo-[1,2,3]-triazol-1-aryl-trifluoroborates from haloaryltrifluoroborates via a one-pot 1,3-dipolar cycloaddition reaction. We found that the use of either electron-rich or electron-deficient haloaryltrifluoroborates led to the desired cycloaddition products with good to excellent yields. Furthermore, we successfully carried out the cross-coupling reactions of the obtained triazoles with various aryl halides by means of the Suzuki-Miyaura reaction in the presence of 3 mol % of Pd(PPh₃)₄ catalyst in a 20% aqueous 1,4-dioxane solution at 100 °C; all these reactions yielded complete conversion to the corresponding products. Besides providing a high level of personnel safety, our highly versatile approach allows the preparation of functionalized organotrifluoborates containing 1,2,3-triazoles with retained functionality.