芳基丙酮酸的合成

本文报道用Meerwein芳基化反应由2-取代丙烯酸合成芳基丙酮酸的方法。     

3-芳基-2-丙酮酸的烯醇结构及Clemmensen还原反应机理

本文用^1H NMR谱研究了3-芳基丙酮酸的烯醇式结构及推测其Clemmensen还原反应机理。     

合成3-芳基丙酮酸酯的新方法: 3-芳基失水甘油 酸乙酯异构化

研究了3-芳基失水甘油酸酯在硝酸处理活性炭的催化下定向异构化制备3-芳基丙酮酸酯的新方法。     

芳基-芳基偶联反应的研究进展

综述了近年来芳基-芳基偶联反应的研究进展, 包括不同类型芳基-芳基偶联反应的特点、机理和应用, 尤其是对立体选择性和区域选择性的偶联方法进行了重点介绍.     

银催化1-溴代炔烃的功能化反应:高区域和立体选择性合成(Z)-β-溴-1-芳基乙烯基芳基酯（英文）

发展一种银催化1-溴代炔烃的官能团反应,用于高度区域和立体选择性合成(Z)-β-溴-1-芳基乙烯基芳基酯.以市售的芳香羧酸为原料, Ag₂O为催化剂,以Et₃N为碱, 1-溴炔烃与芳香羧酸反应,高收率得到相应的(Z)-β-溴-1-芳基乙烯基芳基酯产物.研究结果表明, Ag₂O在反应中起着重要的催化作用.     

紫外光介导合成1,2,4-三芳基-1,4-丁二酮反应研究

在紫外光照射下,安息香发生裂解产生苯甲酰基自由基,与α,α-二芳基烯丙醇的双键发生自由基加成并伴随1,2-芳基迁移,实现了双键的双官能团化;同时该反应为有效合成1,2,4-三芳基-1,4-丁二酮化合物提供了一条新途径。该方法具有操作简单、反应条件温和等优点。     

盐酸2-芳基-3,5,5-三甲基-2-吗啉醇的合成

盐酸2-芳基-3; 5; 5-三甲基-2-吗啉醇的合成;盐酸芳基三甲基吗啉醇; 胺化; 合成     

2-(4-羟基苯基)-3,3,3-三氟丙酸乙酯的合成研究

报道了以苯酚和三氟丙酮酸乙酯为起始原料,在温和条件下合成高产率的2-(4-羟基苯基)-3,3,3-三氟丙酸乙酯的一条新途径.该途径包括无水碳酸钾催化的苯酚与三氟丙酮酸乙酯间的亲电取代反应、由此形成的产物的选择性侧连羟基的氯代反应和随后的硼氢化钠还原反应.     

1-芳酰基-4-(5-芳基-2-呋喃甲酰基)氨基硫脲衍生物的合成及其生物活性

酰胺基硫脲;芳基酰肼;1-芳酰基-4-(5-芳基-2-呋喃甲酰基)氨基硫脲衍生物的合成及其生物活性     

超声条件下芳基格氏试剂与4-烷基苯乙酮的反应

二芳基乙烯;超声条件下芳基格氏试剂与4-烷基苯乙酮的反应     

Synthesis of α,α-difluoro-γ-butyrolactones via ethyl iododifluoroacetate

A novel synthesis of α,α-difluoro-γ-butyrolactones was realized by the alkaline hydrolysis of the adducts of ethyl iododifluoroacetate and alkenes. Ethyl iododifluoroacetate reacted with alkenes in the presence of sodium dithionite to give the addition products in 62-78% yields. The products were hydrolyzed in 10% aqueous sodium carbonate solution to give α,α-difluoro-γ-butyrolactones in 93-98% yields.     

乙酸乙酯在D3F阴离子开环聚合中的促进作用

以硅醇钠为引发剂,乙酸乙酯(EA)为极性调节剂,在HAAKE转矩流变仪中合成了聚三氟丙基甲基硅氧烷(PMTFPS),探讨了三氟丙基甲基环三硅氧烷(D3F)聚合过程中EA的促进作用.结果表明,在120℃下,引发剂质量分数为2.74%,EA极性凋节剂浓度为0.30 mol/L,反应4 min时,PMTFPS的数均分子量((...     

Nitroalkanes and ethyl glyoxalate as common precursors for the preparation of both β-keto esters and α,β-unsaturated esters

β-Nitro acrylic esters, obtained by the reaction of nitroalkanes and ethyl glyoxalate, are the key building blocks for the immediate synthesis of both the title compounds. In fact, their treatment with titanium trichloride produce the direct conversion to the β-keto esters, while their reaction with sodium boron hydride gives the one-pot synthesis of α,β-unsaturated esters through formal substitution of the vinylic nitro group with an hydrogen.     

Adsorption of ethyl xanthate anions on a silver electrode. An in-situ FTIR study

The adsorption of ethyl xanthatc ion (EX⁻) on a silver electrode in sodium sulphate, phosphate buffer (pH 6.8) and borate buffer (pH 9.2) solutions was studied in situ using Fourier transform IR reflection spectroscopy. The measurements were carried out using a thin-layer flow cell, which allows a continuous supply of the electroactive species into the thin layer. The voltammetric behaviour of the silver electrode in EX⁻-containing solution is characterized by the formation of silver ethyl xanthate (AgEX), which is preceded by a prewave due to chemisorption of ethyl xanthate. An IR band at 1220 cm ⁻¹, assigned to chemisorbed ethyl xanthate, was observed in spectra obtained in the chemisorption region. All IR bands characteristic of AgEX were observed in spectra of a silver electrode surface covered by a few monolayers of AgEX. The in-situ IR measurements also showed that the adsorption of EX⁻ starts directly on the positive side of the potential of zero charge of silver (−0.7 V/SHE).     

A novel method for the synthesis of biodiesel from soybean oil and urea

The increasing demand for energy has encouraged the development of renewable resources and environmentally benign fuel such as biodiesel. In this study, ethyl fatty esters (EFEs), a major component of biodiesel fuel, were synthesized from soybean oil using sodium ethoxide as a catalyst. By-products were glycerol and difatty acyl urea (DFAU), which has biological characteristics, as antibiotics and antifungal medications. Both EFEs and DFAU have been characterized using Fourier transform infrared (FTIR) spectroscopy, and ¹H nuclear magnetic resonance (NMR) technique. The optimum conditions were studied as a function of reaction time, reactant molar ratios, catalyst percentage and the effect of organic solvents. The conversion ratio of soybean oil into pure EFEs was 76% after 10 h of reaction. The highest conversion yield of EFEs is obtained when the urea/soybean oil ratio was from 6.2 mmol to 1 mmol, while the highest production of DFAU is obtained when the ethoxide (as a catalyst)/soybean oil ratio is from 6.4 mmol to 1 mmol in hexane as the reaction medium.     

碱性水溶液中单6-氧-对甲苯磺酰-β-环糊精酯的非均相合成

不引入有机溶剂,低温下将对甲苯磺酰氯与β-环糊精在NaOH水溶液中进行非均相反应,得到了单6-氧-对甲苯磺酰-β-环糊精酯(6-OTs-β-CD).借助1H NMR谱证实了环糊精单磺酰化机理.考察了产物的水解因素,研究了反应条件对产率的影响.实验结果表明,投料摩尔比n(CD)∶n(TsCl) =4∶1,碱液浓度0.75...     

A green method using micellar system for determination of sulfonamides in soil

A green and simple method was developed for determination of sulfonamides (SAs) in soil samples. The procedure was based on the microwave-assisted extraction (MAE) of SAs from soil using non-ionic surfactant Triton X-114 as the extraction medium. Then sodium chloride was added into the MAE extract and the mixture was equilibrated for some time at high temperature. The analytes in the surfactant-rich phase were concentrated with the help of centrifugation and directly analyzed by high performance liquid chromatography with UV detection. None of potentially hazardous organic solvents was used in the whole sample preparation procedure. The significant variables for the performance of extraction and concentration were studied. The limits of detection of SAs obtained are in the range of 3.2-5.7 ng g⁻¹. The relative standard deviations of intra- and inter-day tests ranging from 3.5% to 7.7% and from 4.6% to 9.5% are obtained, respectively. This method was applied to the determination of SAs in some soil samples with different characteristics. The SAs recoveries obtained at fortified level of 100 ng g⁻¹ for these samples are in the range of 81.2-93.7%. The effect of ageing time of spiked soil samples on the SAs recoveries was examined by the proposed method and a method reported in the literature. The recoveries of SAs decreased when the ageing time changed from 1 day to 4 weeks.     

Translucent nanolatexes through emulsion polymerisation of ethyl acrylate

Turbid emulsion systems of ethylacrylate/sodium dodecyl sulphate/water with monomer to surfactant (M/S) ratios 10 and 40 were transformed into stable transparent/translucent nanolatexes through emulsion polymerisation using potassium persulphate as an initiator. The latex particle size was observed to be similar to that obtained by true microemulsion polymerisation where M/S ratio is one. The kinetic plots exhibited two intervals upto M/S ratios 10. AIBN initiated systems showed separation of two phases for the M/S ratio ?10. M/S ratios were varied from 1 to 54 for the comparative study of polymerisation in emulsion and microemulsion media. Gel effect dominance was observed around 40-60% conversion for the microemulsion polymerisation of ethylacrylate. Only one chain per particle was observed for microemulsion system with M/S ratio 1 and three to four chains per particle were observed for the systems with M/S ratios 10 and 40. Unlike M/S=1 system, higher dependency of polymerisation rate on initiator concentration was observed for the systems with M/S=10 and 40. A possible mechanism for such a transformation has been proposed.     

Determination of traces of impurities in high-purity sodium chloride by differential pulse polarography and flame spectrometry

Summary Detection limits for the determination of a number of elements in solid sodium chloride by differential pulse polarography, flame absorption and emission spectrometry were established. These methods were used for a quantitative investigation on the distribution of ppm quantities of Cu, Pb, Cd, Zn, Mn, Mg, Sr and Ba between the crystallizate and the mother solution obtained in a partial crystallization of sodium chloride from its saturated solution. Recoveries of the crystallization process, calculated from the results of the analysis, vary from 86% for Pb to 115% for Sr.

---

Bestimmung von Spurenverunreinigungen in reinstem Natriumchlorid durch Differential-Pulspolarographie und Flammenspektrometrie

Zusammenfassung Die Nachweisgrenzen für die Bestimmung einer Zahl von Elementen im festen Natriumchlorid wurden mit Differential-Pulspolarographie, Absorptions- und Emissions-Flammenspektrometrie bestimmt. Diese Methoden wurden benutzt zur quantitativen Untersuchung der Verteilung von ppm-Mengen Cu, Pb, Cd, Zn, Mn, Mg, Sr und Ba zwischen kristallisiertem Salz und Mutterlösung bei teilweiser Kristallisation vom Natriumchlorid aus seiner gesättigten Lösung. Die Ausbeuten des Kristallisationsprozesses, berechnet aus den Analysenergebnissen, schwanken von 86% für Pb bis 115% für Sr.

Lecture presented at Euroanalysis I Conference, 28. 8.–1. 9. 1972 in Heidelberg, Germany.     

Ultrasound-assisted synthesis of ethyl hexanoate using heterogeneous catalyst: Optimization using Box-Behnken design

Ultrasound-assisted synthesis of ethyl hexanoate was studied in a solvent-free system using Amberlyst-15 as a heterogeneous catalyst. The effect of reaction parameters was evaluated by employing Box Behnken Design. Maximum conversion was obtained as 83.9% experimentally with operating temperature 60 °C, ethanol to hexanoic acid molar ratio as 3, 60% duty cycle, 11% catalyst loading, 10% molecular sieves, and 80 W input power which were optimized through one parameter at a time. The optimal conditions for maximum 86.66% conversion obtained by Box Behnken Design operated in Response Surface Methodology were 62.8 °C temperature, 3.31 ethanol to hexanoic acid molar ratio, and 51.58% duty cycle. The absence of external mass transfer resistances was proved by evaluating Mear's criterion. Thiele modulus and effectiveness factor were determined to study the influence of internal mass transfer resistance qualitatively. The kinetics of the heterogeneous reaction was modeled using Langmuir-Hinshelwood model. The activation energy was calculated as 24.61 kJ/mol.