Transition metal(II) complexes of 1-(α-hydroxynaphthyl)-2-(3′-methyl-5′-mercapto-1′,2′,4′-triazole)-2-aza-ethane

Summary Binuclear metal complexes of the type [M(HMTE)-(H₂O)₂]₂, where HMTE=1-(-hydroxynaphthyl)-2-(3-methyl-5-mercapto-1,2,4-triazolc)2-aza-ethane and M-Cu^II, Co^II, Ni^II and Mn^II have been prepared and characterized. An octahedral geometry around the metals is proposed. The complexes have been screened as possible fungicides.     

Nickel(II) and copper(II) – l-cysteine,l-methionine,l-tryptophan-nucleotide ternary complexes

Four new ternary complexes of Cu^II with l-methionine and the nucleotides 5AMP (adenosine 5-phosphate), 5GMP (guanosine 5-phosphate) and 5IMP (inosine 5-phosphate), and with l-tryptophan and 5AMP, were synthesized and characterized by elemental analysis and i.r. spectroscopy. One ternary complex of N^II with l-cysteine and 5IMP was also prepared and characterized. The study of the three ternary compounds of Cu^II, of general formulae Cu-5NMP-l-methionine, indicates coordination of the phosphate group and of N(7) of the purinic ring. l-Methionine is bound by the carboxylic and amino groups. The ternary complex obtained from a mixture of Cu-5AMP and l-tryptophan is a dimer in which the nucleotide bridges the two copper atoms. In the complex of Ni-5IMP and l-cysteine, the nucleotide seems to bind the metal through the N(7) of the heterocyclic ring, and the l-cysteine is coordinated as a bidentate chelate by the carboxyl and thiol groups. E.s.r. spectra of the copper complexes are in good agreement with the low symmetry structure proposed. The one-electron reduction potentials E_c(Fc⁺/Fc) (V) of Cu^II to Cu^I were established for the four copper complexes from cyclic voltammetry studies. The one-electron oxidation potential E_a(Fc⁺/Fc⁺) (V) of Ni^II to Ni^III was also measured for the nickel complex.     

Ab initio studies of the low-lying π-states of borazine

Self-consistent-field and configuration-interaction studies were performed on borazine, using a double-zeta basis set augmented by six diffuse -functions. Low-lying singlet and triplet states of the A ₁ , A ₂ and E species were calculated, corresponding to ^* excited valence and Rydberg states. A selection out of singly and doubly excited configurations relative to a set of reference configurations was made for each species. Calculated vertical excitation energies (in eV) are 7.12 for ¹ A ₂(V), 8.45 for ¹ E (3p-R), 8.57 for ¹ A ₁(V), 8.9 for ¹ E(V-R), 9.55 for ¹ E(3d-R), 6.98 for ³ A ₁(_V), 7.27 for ³ E(V), 7.82 for ³ A ₂(V), 8.30 for ³ E(3p-R), and 9.5 for ³ E(3d-R), where V and R refer to valence or Rydberg character. The results are compared with experimental excitation energies, previous ab initio studies of borazine, and with recent ab initio studies of benzene.Dedicated to Professor Dr. H. Hartmann on the occasion of his 65th birthday.     

Palladium(II) and platinum(II) chloride and bromide complexes with some 2-methylpyridyl- or methylquinolyl-benzimidazole,benzoxazole, or benzthiazole

Summary Palladium(II) and platinum(II) complexes [MLX₂], where L=2-(4-methyl-2-pyridyl)benzimidazole (mpbi), 2-(4-methyl-2-pyridyl)benzoxazole (mpbo), 2-(4-methyl-2-quinolyl)benzoxazole (mpbo), 2-(4-methyl-8-quinolyl)benzoxazole (mq'bo), X=Cl. Br, together with M(mqbo)₂Br₂ and Pt₂(mpbt)Cl₄, where mpbt=2-(4-methyl-2-pyridyl)benzthiazole, have been synthesized and characterized by conductivity and magnetic measurements as well as by i.r. and electronic spectra. The ligands are bidentate chelates through the pyridine or quinoline and isoxazole or imidazole nitrogen atoms. The [MLX₂] derivatives arecis, square planar.     

Mono and dinuclear cationic rhodium(I) and iridium(I) complexes with sulphur donor and group Vb ligands

Summary Rhodium(I) and iridium(I) mixed complexes of the formulae [M(diolefin)LL]ClO₄, [M(diolefin)L₂L]ClO₄, [(diolefin)LIr(-L)₂IrL(diolefin)](ClO₄)₂, [(diolefin)LM(-L-L)ML'(diolefin)](ClO₄)₂, [(diolefin)Rh{-(L-L)}₂Rh(PPh₃)₂](ClO₄)₂ and [(diolefin)LIr{-(L-L)}₂IrL (diolefin)](C1O₄)₂, (L=monodentate sulphur ligand, L-L=bidentate sulphur ligand, L=group Vb ligand; M=Rh, diolefin=1,5-cyclooctadiene (COD) or 2,5-norbornadiene (NBD); M=Ir, diolefin=COD) are described.Author to whom all correspondence should be directed.     

4,4′-Bipyridine complexes of molybdenum(II) and tungsten(II)

Treatment of [MI₂(CO)₃(NCMe)₂] with two equivalents of 4,4-bipyridine (4,4-bipy) in CH₂Cl₂ at room temperature gave the MeCN displaced products, [MI₂(CO)₃(4,4-bipy-N)₂] (1) and (2). Equimolar amounts of [MI₂(CO)₃(NCMe)₂] and L (L = PPh₃, AsPh₃ or SbPh₃) react to give [MI₂(CO)₃(NCMe)L], which when reacted in situ with 4,4-bipy yield the new complexes, [MI₂(CO)₃(4,4-bipy-N)L] (3)–(8). Reaction of equimolar quantities of [WI₂(CO)(NCMe)( ²-RC₂R)₂] (R = Me or Ph) and 4,4-bipy gave the new bis(alkyne) complexes, [WI₂(CO)(4,4-bipy-N)( ²-RC₂R)₂] (9) and (10). Treatment of [MI₂(CO)₃(NCMe)₂] with two equivalents of (9) or (10) in CH₂Cl₂ at room temperature affords the bimetallic complexes, [MI₂(CO)₃{WI₂(CO)(4,4-bipy-N,N)( ²-RC₂R)₂}₂] (11)–(14). Equimolar quantities of [MI₂(CO)₃(NCMe)(PPh₃)] (prepared in situ) and (9) or (10), react to give the 4,4-bipy-bridged complexes, [MI₂(CO)₃{WI₂(CO)(4,4-bipy-N,N)( ²-RC₂R)₂}(PPh₃)] (15)–(18). All the new complexes, (1)–(18) were characterised by elemental analysis (C, H and N), i.r. and ¹H-n.m.r. spectroscopy.     

Frozen state transitions in relation to freeze drying

Freeze-drying is used as a gentle dehydration method for heat sensitive materials especially in food and pharmaceutical industries. Most materials, including dissolved sugars in water, do not crystallise during freezing prior to freeze-drying. Supersaturated, freeze-concentrated solutions are amorphous materials and they solidify into a glassy state when their temperature is depressed to below the glass transition temperature,T _g. Differential scanning calorimetry has been used to show that maximally freeze-concentrated sugar solutions, when properly frozen, show during heating a glass transition,T _g , which is followed by ice melting endotherm with onset atT _m . Low molecular weight materials are difficult to freeze-dry as they have lowT _g , andT _m slightly above T _g . High molecular weight materials, such as carbohydrate polymers, exhibit improved dehydration characteristics and they have _g and _m at about the same temperature close to the melting point of pure water. The amorphous, glassy structure typical of freeze-dried materials is formed during prefreezing and retained after removal of ice and the unfrozen water from the freeze-concentrated material. Dehydration temperatures belowT _g allow removal of ice within the solid, glassy solutes, but temperatures aboveT _m result in collapse. The frozen state transitions and properties of freeze-dried materials can be shown in state diagrams which are used to derive proper freeze-drying conditions and storage requirements for various materials.     

Rhenium(V) complexes with vinyl amides

Summary The reactions oftrans-ReOCl₃(PPh₃)₂ with vinyl amides such as RCOCH=C(R)NH₂, where R = CH₂CH₂CO₂H and R = Ph and C₆H₁₃; or R = Me, CH₂CH₂CO₂Me and R = Ph, give complexes of the type ReOCl₂-[RC(O^–)=CHC(R)=NH]PPh₃, the coordination geometry of which have been deduced from i.r. and¹H n.m.r. spectroscopic data.     

Copper(II) chloride and bromide complexes of 2-(2′-Methyl-8′-quinolyl)benzoxazole and 2-(2′ or 4′-methyl-8′-quinolyl)benzimidazole

Summary Copper(II) complexes [CuLX₂], where L = 2-(2-methyl-8-quinolyl)benzoxazole, 2-(2-methyl-8-quinolyl)benzimidazole or 2-(4-methyl-8-quinolyl)-benzimidazole and X = Cl or Br, have been synthesized and characterized by conductivity and magnetic measurements, i.r., electronic and e.s.r. spectra.The ligands always behave as bidentateN-donors giving rise to monomeric compounds withpseudo-tetrahedral coordination geometry.     

Spirocyclic betaines or 2-amino-Δ2-1,3,4-thiadiazoline-5-acetic acid and their rearrangement in acetic anhydride

Reaction of N-(1-pyrrolidinyl)-, N-(1-piperidinyl)-, N-(4-morpholinyl)-, and N-(1-hexahydroazepinyl)-thioureas with propiolic acid gives hetero-N-spiro-4-(2-amino-²-1,3,4-thiadizolin-4-io-5-acetates), which rearrange in acetic anhydride to 2-(N-heteryl)imino-2,3-dihydro-4H-1,3-thiazin-4-ones.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 263–265, February, 1993.     

The electronic structure of molecules by a many-body approach

The vertical valence ionization potentials of cyclopropane, ethylene oxide and ethylene imine are calculated by a many-body Green's function method. For C₃H₆ the ordering of the ionization potentials is 2e(), 1e(), 2a₁(), 1a₂(), 1e(). The assignment of the 2a₁ and the 1a₂ ionization potentials which has been controversial is thus clarified. The ordering is in agreement with the result obtained via Koopmans' theorem. For ethylene oxide and ethylene imine Koopmans' theorem fails in predicting the correct order of ionic states. For C₂H₄O the ordering of the ionization potentials is 2b ₁(), 4a ₁, 1a ₂(), 2b ₂,3a ₁, 1b ₁(), 1b ₂, 2a ₁ and for C₂H₅N 6a, 5a, 3a, 2a, 4a, 3a, 1a, 2a. The agreement of the computed ionization potentials with the experimental values is very satisfactory.     

Homo- and heterodinuclear 2,2′-bipyrimidine-bridged complexes

[M(hfacac)₂(bpym)] complexes, where M = Co^II, Ni^II or Zn^II, hfacac = hexafluoroacetylacetonate and bpym = 2,2bipyrimidine; and [Cl₂M(bpym)M(hfacac)₂] complexes, where M = Co^II, Ni^II Mn^II or ZnII M = Ni^II; M = NiII or Zn^II and M = Zn^II; M = Ni^II and M = Co^II have been prepared and characterized by chemical analysis, conductance measurements, IR and electronic spectroscopies and magnetic susceptibility measurements (4.2–292K range). The dinuclear NiII–Ni^II, Co^II–Ni^II and Mn^II–Ni^II complexes are antiferromagnetic, with an intramolecular exchange parameter, J, of –2.3–8.9cm–1. Co^II and Mn^II are in a high spin state. The low temperature effect observed in monomers and in Ni^II–Zn^II dimers is considered a consequence of either an intermolecular antiferromagnetic interaction or the zero-field splitting in NiII.     

Synthesis and some properties of the methyl ester and N,N-diethylamide of 2-azido-5-phenyl-4-thiazolecarboxylic acid

The methyl ester and N,N-diethylamide of 2-azido-5-phenyl-4-thiazolecarboxylic acid were obtained by the reaction of the corresponding 4-substituted 2-hydrazino-5-phenylthiazole with NaNO₂ in acid media. IR and UV spectroscopy were used to show that the compounds synthesized retain azide form in both the crystalline state and in solution. The reaction of azides with dicarbonyl compounds gave derivatives of 2-[5-methyl-4-acetyl-or 2-[5-methyl-4-ethoxycarbonyl-1,2,3-triazol-1-yl]-5-phenylthiazole-4-carboxylic acid.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 710–714, May, 1993.     

Synthesis of 10-(N′-phenyl)imidoyl derivatives of phenothiazine,and their reactions with o,o-dialkylthio- and dithiophosphates

Condensation of phenothiazine with phenyl isocyanide dichloride has given 10(N-phenylchloroformimidoyl)phenothiazine, exchange reactions of which with salts of diakylthio- and dithiophosphoric acids result in rearrangement of the initially formed 10-[N-phenyldialkoxy(thio)phosphorylthioformimidoyl]phenothiazines to 10-{N-phenyl-N-[dialkoxy(thio)phosphoryl]thiocarbamoyl}phenothiazines, while reaction with diisopropyl dithiophosphoric acid affords diisopropyl chlorothiophosphate, phenyl isothiocyanate, and phenothiazine. 10-(N-Phenylethoxyformimidoyl)phenothiazine alkylates dithiophosphoric acid to give 10-(N-phenylcarbamoyl)phenothiazine, while N²-phenyl-N¹,N¹-diethyl-(10-phenothiazinyl)formamidine reacts with diisopropyl dithiophosphoric acid, affording the salt N²-phenyl-N¹,N¹-diethyl-(10-phenothiazinyl)formamidinium O,O-diisopropyl dithiophosphate.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2596–2601, November, 1989.     

Beiträge zur Chemie der Silicium—Stickstoff-Verbindungen, 16. Mitt.: N-Silyl-carbonamide und N-Silyl-carbamidsäureester

Zusammenfassung Die durch direkte Silylierung von Carbonamidgruppen mit Halogensilanen nicht zugänglichen Verbindungen der Gruppierung R-CONHSiR₃ konnten durch Umsetzung von Säureamiden oder Säurechloriden mit Hexamethyldisilazan gewonnen werden. So wurden Derivate mit R=CH₃, C₂H₅, C₆H₅, CONHSiR₃ , OCH₃, OC₂H₅, OCH(CH₃)₂; R=CH₃ (vgl. Tab. 1) dargestellt und in ihren physikalischen und chemischen Eigenschaften näher studiert.Herrn Prof. Dr.A. Zinke zum 70. Geburtstag gewidmet.15. Mitt.:U. Wannagat undH. Kuckertz, Angew. Chem.74, 117 (1962).Auszug aus der DissertationJ. Pump, Techn. Hochsch. Aachen 1962.     

Quantitative measurement of isomeric cyclic nucleotides from T-lymphocytes by HPLC

Summary The influence of thymic factors on the levels of different cyclic nucleotides in human lymphoblastic lymphoma cells has been studied. A single-step HPLC method for the simultaneous determination of 2,3-cGMP, 3,5-cGMP, 2,3-cAMP and 3,5-cAMP from biological cell materials is described. Concentrations even in the picomolar range could be determined quantitatively.

---

Quantitative HPLC-Messung isomerer cyclischer Nucleotide aus T-Lymphocyten

     

Discussion on the method for the measurement of the flexural modulus of coupled materials and reasons of the shifts of theQ −1 maxima caused by coupling

Summary When measuringQ ^–1 and the flexural resonance frequency of bars clamped at one end, constituted by a viscoelastic polymeric material glued to a rigid support of modulusE ₁, it is possible to calculate the componentsE ₂ andE ₂ of the complex elastic modulus of the polymeric material examined. In this work the minimum (critical) value of the ratioa=E ₂ /E ₁=a _c and the values of the ratioQ ₂ ^–1/Q ^–1=F ₁ are evaluated beyond which no exact calculation ofE ₂ and ofQ ₂ ^–1 is possible.Within the confidence limits of the linear viscoelasticity theory, these values depend on the accuracy of measurement of both frequency and resonance curve, as well as on the instrument employed, on the operating temperature and on the ratio between the thicknesses of the two coupled materials.In order to keep outside the critical conditions, the most convenient method involves the use of measurements of coupled test-pieces having different ratiosz between their thicknesses and of supports having different modulusE ₁, depending on the field of temperature of the analysis ofE ₂ and tg ₂ concerning and E.P.R. elastomer and a vulcanized cis-1,4 polyisoprene in very wide ranges of temperature comprising the glass transition. Moreover, it is demonstrated by analysis the shift on the temperature axis of the tg maximum of the composite test-piece with respect to the position of the tg maximum of the polymeric material alone.With 11 figures and 1 table     

1-Aryl-6-azauracile, 4. Mitt.: Die Synthese des 1-Phenyl-5-[5′-methyl-1′,2′,4′-oxdiazolyl-(3′)]-6-azauracils und einiger seiner Derivate

Zusammenfassung Arylhydrazon-cyanacetylcarbamidsäureäthylester (I) wurde durch Einwirkung einer Na₂CO₃-Lösung auf 1-Aryl-5-cyan-6-azauracile (II)^1,2 cyclisiert. Nitrile (II) wurden durch Addition von Hydroxylamin in entsprechende Amidoxime (III) übergeführt, welche durch Kochen mit Acetanhydrid die zugehörigen 1-Aryl-5-[5-methyl-1,2,4-oxdiazolyl(3)]-6-azauracile (IV) lieferten.

---

Aryl hydrazone-cyanoacetylcarbamic acid ethyl esters (I) have been cyclized in Na₂CO₃ soln. yielding 1-aryl-5-cyano-6-azauraciles (II)^1,2. Addition of NH₂OH to the nitriles (II) gave the corresponding amidoximes (III), which by refluxing with Ac₂O were converted to the corresponding 1-aryl-5-[5-methyl-1, 2, 4-oxdiazolyl(3)]-6-azauraciles (IV).

     

Metal complexes of 1-hydroxy-2,3-dimethyl-4-(3′-methyl-4′-amino-5′-mercapto-1′, 2′, 4′-triazole)-1,4-diaza-1, 3-butadiene with manganese(II), cobalt(II), nickel(II) and copper(II)

Summary Binuclear metal complexes of the type [M(HDDB)-(H₂O)₂]₂: where HDDB=1-hydroxy-2,3-dimethyl-4-(3-methyl-4-amino-5-mercapto-1, 2, 4-triazole)-1,4-diaza-1, 3-butadiene and M=manganese(II), cobalt(II), nickel(II) and copper(II), have been prepared and characterised by elemental and thermal analyses, magnetic measurements, electronic and i.r. spectra. Octahedral geometry around the metal(II) ions is proposed and the crystal field parameters of the cobalt(II) and nickel(II) complexes are also calculated. Fungicidal screening of the complexes has been made aginstHelminthosporium oryzae andFusarium oxysporium.     

Crystal and molecular structure of 1-aza-6′-(3′-oxo-5′, 5′-dimethyl-δ1′-pyrrolin-3′-yl)methylidene-2,2,7,7-tetramethyl-4-hydroxybicyclo-[2.2.21azaoctane

An x-ray structural study has shown that 6-(3-oxo-5,5-dimethyl-¹-pyrrolin-3-yl)methylidene-2,2,7, 7-tetramethyl-4-hydroxybicyclo[2.2.2]azaoctane is formed as a low-molecular-weight byproduct of the solid-phase polymerization of 1,4-bis(2,2,6,6-tetramethyl-4-hydroxy-4-piperidyl)butadiyne.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 585–587, March, 1990.