Morphology of solution crystallized trans-1,4-polyisoprene

The film formation method has been successfully used to grow single crystals and other complex morphological features of low melting form (LMF) and high melting form (HMF) of trans-1,4-polyisoprene (TPIP). Below 40 °C dilute amyl acetate solution gave hexagonal shaped LMF crystals. Thick and elongated hexagonal shaped morphology was shown by HMF crystals at temperatures above 40 °C. Straight faces and sharp corners of the single crystals, and also of complex crystals, acquired round shapes when highly polydispersed TPIP was used for crystallization.     

Green chemistry strategies using crystal-to-crystal photoreactions: stereoselective synthesis and decarbonylation of trans-alpha,alpha'-dialkenoylcyclohexanones

This paper describes steps to develop green chemistry strategies to prepare compounds with adjacent quaternary centers by stereospecific photodecarbonylation of crystalline ketones bearing radical-stabilizing alkenyl substituents in their alpha-positions. Crystals of trans-2,6-dimethyl-2,6-di(benzyloxycarbonyl-trans-ethenyl)-cyclohexanone, trans-2, prepared by double Michael addition of benzyl propiolate to 2,6-dimethyl-cyclohexanone iso-butylimine (1), were investigated along with those of the dicarboxylic acid (trans-3) and a dibenzylammonium salt derivative (trans-4) to establish the best substrates for the solid-state reaction. While reactions of the ester and the acid lose CO to give radical combination products with high selectivity at low conversions, the crystalline salt gave a similar product in >97% yield. Explorative reactions carried out under sunlight and in semipreparative (1.5 g) scale highlight the potential of reactions in crystals as a viable strategy for the development of green chemistry.     

The trans-1,4-cyclohexylene group as a structural fragment in liquid crystals

In this review the effect on physico-chemical and electro-optical properties of the introduction of the trans-1,4-cyclohexylene fragment into the molecular core of liquid crystals is discussed, rationalized in terms of existent theories, and compared with the effect of other well-known molecular fragments.     

Kinetic separation of propene and propane in metal-organic frameworks: controlling diffusion rates in plate-shaped crystals via tuning of pore apertures and crystallite aspect ratios

A series of isostructural, noncatenated, zinc-pillared-paddlewheel metal-organic framework materials has been synthesized from 1,2,4,5-tetrakis(carboxyphenyl)benzene and trans-1,2-dipyridylethene struts. Substantial kinetic selectivity in the adsorption of propene over propane can be observed, depending on the pore apertures and the rectangular-plate morphology of the crystals.     

The trans-1,4-cyclohexylene group as a structural fragment in liquid crystals

In this review the effect on physico-chemical and electro-optical properties of the introduction of the trans-1,4-cyclohexylene fragment into the molecular core of liquid crystals is discussed, rationalized in terms of existent theories, and compared with the effect of other well-known molecular fragments.     

Thermische Analyse binärer Systeme Organischer Verbindungen,die induzierte smektische Phasen bilden

Zusammenfassung Acht binäre Systeme einer homologen Reihe von Cholesterylestern (Cholesterylpropionat bis Cholesteryldecanoat) mit trans-4-Propylcyclohexyl-4-(trans-4-pentylcyclohexyl) benzoat (Licristal 1223, Merck, Darmstadt) wurden thermomikroskopisch und DSC-analytisch untersucht. In sechs Fällen wurden induzierte smektische A-Phasen mit Umwandlungspunktmaxima festgestellt. Die cholesterischen bzw. nematischen Phasen bilden kontinuierliche Reihen von cholesterischen Mischkristallen, während die festkristallinen Phasen bei allen Systemen einfache Eutektika aufweisen.

---

Eight binary systems of a homologous series of cholesteryl esters (from cholesteryl propionate to cholesteryl decanoate) with trans-4-propylcyclohexyl-4-(trans-4-pentyl-cyclohexyl) benzoate (Licristal 1223, Merck, Darmstadt) were examined by thermomicroscopy and DSC analysis. In six cases induced smectic A phases with transition point maxima were observed. The cholesteric resp. nematic phases form continuous series of cholesteric mixed crystals, while the solid phases show simple eutectics.

     

Liquid-crystalline bisadducts of [60]fullerene

A second-generation cyanobiphenyl-based dendrimer was used as a liquid-crystalline promoter to synthesize mesomorphic bisadducts of [60]fullerene. Liquid-crystalline trans-2, trans-3, and equatorial bisadducts were obtained by condensation of the liquid-crystalline promoter, which carries a carboxylic acid function, with the corresponding bisaminofullerene derivatives. A monoadduct of fullerene was also prepared for comparative purposes. All the compounds gave rise to smectic A phases. An additional mesophase, which could not be identified, was observed for the trans-2 derivative. The supramolecular organization of the monoadduct derivative is governed by steric constraints. Indeed, for efficient space filling, adequacy between the cross-sectional areas of fullerene (approximately 100 A(2)) and of the mesogenic groups (approximately 22-25 A(2) per mesogenic group) is required. As a consequence, the monoadduct forms a bilayered smectic A phase. The supramolecular organization of the bisadducts is essentially governed by the nature and structure of the mesogenic groups and dendritic core. Therefore, the bisadducts form monolayered smectic A phases. The title compounds are promising supramolecular materials as they combine the self-organizing behavior of liquid crystals with the properties of fullerene.     

One-pot regioselective synthesis and X-ray crystal structure of a stable [60]fullerene trisadduct with the e(edge),e(face),trans-1 addition pattern

The Bingel functionalisation of C(60) with a structurally novel tether equipped with three reactive malonate groups afforded a C(2v)-symmetrical e(edge),e(face),trans-1 trisadduct in a complete regioselective manner and in an excellent yield of 65%. The [60]fullerene trisadduct showed pronounced ability to crystallise and gave X-ray quality single crystals for analysis.     

Chiral macrocyclic aliphatic oligoimines derived from trans-1,2-diaminocyclohexane

Aliphatic dialdehydes of rigid structures having a cyclohexane, a bicyclo[2.2.2]octane or a [7]triangulane skeleton, have been condensed with enantiomerically pure trans-1,2-diaminocyclohexane to give [3+3] or [2+2] macrocyclization products. Unlike acyclic aliphatic imines, these macrocyclic oligoimines show enhanced stabilities and their structures in the crystals could be determined by X-ray diffraction analyses. The enantiomerically pure [7]triangulane dialdehyde showed remarkable diastereoselectivity in the condensation with the two enantiomers of trans-1,2-diaminocyclohexane: only one of the enantiomers gave a [2+2] macrocyclization product. Circular dichroism measurements combined with computational analysis show that the lowest energy electronic transition in these cyclic oligoimines is of n-pi* type.     

The Structurally Regular trans-1,4-Poly(chloroprene)

Radiation polymerization of large crystals of chloroprene formed within the temperature range -130 to -180°C has yielded the stereoregular trans-1,4-poly(2-chloro-1,3-butadiene). The monomer was found to have a glass transition temperature of ca. -180°C. Polymerization of monomer rapidly cooled to below -180°C was difficult and gave only structurally irregular polymer in low yield.     

Reactions of halogens with Pt(II) complexes of N-alkyl- and N,N-dialkyl-N'-benzoylthioureas: oxidative addition and formation of an I2 inclusion compound

The treatment of cis-[Pt(II)(L(1a/b)-S,O)2] complexes of N,N-diethyl- (HL(1a)) and N,N-di(n-butyl)-N'-benzoylthiourea (HL(1b)) with I2 or Br2 in chloroform, leads to rapid oxidative addition to yield several geometric isomers of [Pt(IV)(L-S,O)(2)X(2)](X = I, Br); the reactions can be monitored by (195)Pt NMR and UV-visible spectrophotometry. The products cis-[Pt(IV)(L(1a)-S,O)2I2] and cis-[Pt(IV)(L(1a)-S,O)2Br2], which have been isolated and structurally characterized, are the first-reported crystal structures of complexes of Pt(iv) with this class of ligand. Molecules of 6 pack such that the I-Pt-I axes are essentially aligned, with unusually close nearest-neighbour iodide contacts (3.553(1)A). These short II intermolecular interactions lead to infinite chains of weakly connected molecules in crystals of the compound. No such interactions are evident in the corresponding crystals of . Reaction of the Pt(II) complex of N-propyl-N'-benzoylthiourea (H2L(2a))cis-/trans-[Pt(II)(H2L(2a)-S)2Br2] with Br2 also results in oxidative addition, to yield trans-Pt(IV)(H2L(2a)-S)2Br4. By contrast, treatment of cis-/trans-[Pt(II)(H2L(2a)-S)2I2] with I2 does not lead to an oxidative addition product, yielding instead an interesting iodine inclusion compound of Pt(II), trans-[Pt(II)(H2L(2a)-S)2I2.I2. In 8, short intermolecular II distances of 3.453(1)A between I2 and coordinated iodide ions in trans-[Pt(II)(H(2)L(2a)-S)(2)I(2)] molecules, result in infinite chains of weakly linked trans-[Pt(II)(H2L(2a)-S)2I2]...I2 groups in the lattice. However, the empirically estimated bond order of 0.75 for the included I2 molecules does not support the possible existence of discrete tetraiodide ions (I4(2-)) in the lattice of compound 8.     

Study of ruthenium(II) complexes with anticancer drugs as ligands. Design of metal-based phototherapeutic agents

The reaction of trans-[RuCl(2)(PPh(3))(3)] (Ph = C(6)H(5)) with 2-thio-1,3-pyrimidine (HTPYM) and 6-thiopurines (TPs) produced mainly crystalline solids that consist of cis,cis,trans-[Ru(PPh(3))(2)(N,S-TPYM)(2)] (1) and cis,cis,trans-[Ru(PPh(3))(2)(N(7),S-TPs)(2)]X(2) (X = Cl(-), CF(3)SO(3)(-)). In the case of TPs, other coordination isomers have never been isolated and reported. Instead, the mother liquor obtained after filtration of 1 produced red single crystals of trans,cis,cis-[Ru(PPh(3))(2)(N,S-TPYM)(2)].2H(3)O(+).2Cl(-) (2.2H(3)O(+).2Cl(-)). Selected ruthenium(II)-thiobase complexes were studied for their structural, reactivity, spectroscopic, redox, and cytotoxic properties. Single crystals of 1 contain thiopyrimidinato anions chelated to the metal center via N and S. The Ru[bond]N bonds are significantly elongated for 1 [2.122(2) and 2.167(2) A] with respect to 2 [2.063(3) A] because of the trans influence from PPh(3). The coordination pseudo-octahedron for 2 is significantly elongated at the apical sites (PPh(3) ligands). Solutions of cis,cis,trans isomers in air are stable for weeks, whereas those of 2 turn green within 24 h, in agreement with the respective redox potentials. cis,cis,trans- and trans,cis,cis-[Ru(PH(3))(2)(N,S-TPYM)(2)], as optimized through the DFT methods at the Becke3LYP level are in good agreement with experimental geometrical parameters (1 and 2), with cis,cis,trans being more stable than trans,cis,cis by 3.88 kcal. The trend is confirmed by molecular modeling based on semiempirical (ZINDO/1) and molecular mechanics (MM) methods. Cytotoxic activity measurements for cis,cis,trans-[Ru(PPh(3))(N-THZ)(N(7),S -H(2)TP)(2)]Cl(2) (4) (THZ = thiazole, H(2)TP = 6-thiopurine) and cis,cis,trans-[Ru(PPh(3))(2)(N(7),S-HTPR)2]Cl(2) (5) (HTPR = 6-thiopurine riboside) against ovarian cancer cells A2780/S gave IC(50) values of 17 +/- 1 and 29 +/- 9 microM, respectively. Furthermore, the spectral analysis of HTPYM, TPs, and their Ru(II) complexes in solution shows that intense absorptions occur in the UVA/vis region of light, whereas standard nucleobases absorb in the UVB region.     

Scanning pyroelectric microscopy revealing the spatial polarity distribution in topologically centric crystals of trans-4-chloro-4'-nitrostilbene

Scanning pyroelectric microscopy (SPEM) was applied to investigate grown-in polarity in trans-4-chloro-4'-nitrostilbene (CNS) single crystals. Sectors {011} and {011} were scanned for cross sections perpendicular to the a-direction. A rotational analysis for {011}, {011} faces was performed for a needle like crystal turned around the a-axis. All pyroelectric experiments confirm a bipolar grown-in state of polarity for sector involving the twofold axis b. These measurements agree with theoretical force field and stochastic calculations, predicting a bipolar state and a nearly identical extent of polarity for two different sectors.     

新颖的含乙炔桥键液晶分子设计与合成

为降低液晶分子的双折射率并获得宽液晶相区, 用环己基替代传统二苯乙炔液晶分子中的一个苯环, 得到一类结构新颖的含乙炔桥键的负介电各向异性液晶分子4a, 4b. 目标化合物采用1-trans-4-(trans-4-正戊基环己基)环己基乙炔与4-碘-2,3-二氟苯基醚进行Sonogashira偶联反应制备, 反应总产率27%～28%. 产物结构经MS, IR, NMR鉴定确认. 采用DSC结合偏光显微镜对液晶相变温度进行了测试, 结果表明新化合物4a, 4b清亮点分别为212, 216 ℃, 向列相温区均达到140 ℃, 与传统二苯乙炔类液晶的相变温区基本相当. 物理性能测试表明, 分子骨架共轭程度的削弱不仅使双折射率大幅降低, 而且介电各向异性绝对值还有所增大, 为分子设计提供了新的思路. 新化合物综合性能得到显著改善, 在大尺寸液晶电视领域具有非常好的应用前景.     

Synthesis of trans-1, trans-2, trans-3, and trans-4 bisadducts of C60 by regio- and stereoselective tether-directed remote functionalization

The double Bingel reaction of fullerene C60 with bismalonates attached to a Tr?ger base derived tether afforded trans-1, trans-2, trans-3, and trans-4 bisadducts with excellent regioselectivity. In particular, enantiomerically pure bisadducts with inherently chiral trans-2 or trans-3 addition patterns were prepared starting from enantiomerically pure bismalonates. The absolute configuration of the trans-2 and trans-3 bisadducts was established from their CD spectra. The excellent diastereoselectivity in the double additions to give the trans-2 bisadducts is particularly remarkable given the large distance between the two reacting bonds in opposite hemispheres of the fullerene that is spanned by the tether. Now, all inherently chiral double addition patterns are readily available by tether-directed functionalization using appropriate chiral, nonracemic spacers.     

Liquid crystals for holographic optical data storage

A tutorial review is presented to inform and inspire the reader to develop and integrate strong scientific links between liquid crystals and holographic data storage, from a materials scientist's viewpoint. The principle of holographic data storage as a means of providing a solution to the information storage demands of the 21st century is detailed. Holography is a small subset of the much larger field of optical data storage and similarly, the diversity of materials used for optical data storage is enormous. The theory of polarisation holography which produces holograms of constant intensity, is discussed. Polymeric liquid crystals play an important role in the development of materials for holographic storage and photoresponsive materials based on azobenzene are targeted for discussion due to their ease of photo-reversion between trans- and cis-states. Although the final polymer may not be liquid crystalline, irradiation can induce ordered domains. The mesogens act in a co-operative manner, enhancing refractive indices and birefringences. Surface relief gratings are discussed as a consequence of holographic storage. Cholesteric polymers comprising azobenzene are briefly highlighted. Irradiation causing cis-trans-isomerisation can be used to control helix pitch. A brief mention of liquid crystals is also made since these materials may be of future interest since they are optically transparent and amenable to photo-induced anisotropy.     

Relationship between the configurations of 2-phenyltetrahydrothiophenium 1-methylides and their rearrangement products

trans-2-Phenyltetrahydrothiophenium 1-methylide (trans-3), which is generated by fluoride ion-induced desilylation of trans-2-phenyl-1-[(trimethylsilyl)methyl]tetrahydrothiophenium salt (trans-2), gave a mixture of 1,4,5,10a-tetrahydro-3H-2-benzothiocine (4) ([2,3]sigmatropic rearrangement product) and 4-methylsulfanyl-1-phenyl-1-butene (5) (Hofmann elimination product). Ylide trans-3 cannot undergo [2,3]sigmatropic rearrangement because the ylide-carbon is too far from the phenyl group, and trans-3 would instead isomerize to cis-3. In this paper, we discuss the mechanism of the isomerization of trans-3 to cis-3.     

Diversity-oriented synthesis of enantiomerically pure steroidal tetracycles employing Stille/Diels-Alder reaction sequences

Various steroid analogues were synthesized by Stille coupling of bicyclo[4.3.0]nonenylstannanes cis-/trans-8 and 14 with cyclohexenol triflates 17 and 18 and subsequent Diels-Alder reactions of the resulting dienes. The enantiomerically pure bicyclo[4.3.0]nonenylstannanes cis- and trans-8 were prepared in good yields via the enol triflates cis- and trans-7, obtained from the bicyclo[4.3.0]non-2-en-3-one 5. The alkenylstannane 14 was obtained from the [2+2] cycloadduct 10 a produced from addition of dichloroketene to the enantiomerically pure and protected bishydroxycyclohexadiene 9 a (65 %). Treatment of 10 a with diazomethane, reduction of the dichloromethylene group, and trapping with tributyltin chloride after lithium-for-bromine exchange, yielded the bicyclo[4.3.0]nonenylstannane 14 (23 % over four steps). Stille couplings provided the tricyclic dienes cis-/trans-19 in good yields (73-77 %), whereas the tricyclic diene 20 was obtained in only 34 % yield at best. Diels-Alder reactions of trans-19 with various reactive dienophiles yielded the novel steroidal compounds trans-21 to trans-26 with complete diastereoselectivity. Heating the dienes cis-19 or 20 with maleic acid derivatives provided the corresponding tetracycles cis-23alpha,beta and 27alpha,beta with a cis-C,D ring junction, each as mixtures of two diastereomers. Less reactive dienophiles required higher temperatures to promote the relevant cycloaddition with trans-19 to furnish several stereoisomeric forms of trans-28 and trans-29 in significantly lower yields (31-45 %). The selected steroid analogues trans-22 and trans-23 were deprotected in two steps by using acid catalysis to provide trans-31 and trans-33 (91 and 80 % over two steps). Cyclopropanation of trans-30 yielded the cyclopropasteroid analogue 34 (74 %), treatment of which with trifluoroacetic acid furnished the cyclopropasteroid 35 and the 2-methyl-substituted steroid analogue 36 in 40 and 12 % yield, respectively. Aromatic B-ring steroids 38 (69 %) and 39 (5 %) were accessed by dehydrogenation of trans-24 with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone.     

Stereospecific synthesis of cis- and trans-4-amino-3-hydroxythiophanes

The reduction of 4-benzoylamino- and 4-carbethoxyamino-3-ketothiophanes proceeds stereospecifically to form only trans-4-benzoylamino- and trans-4-carbethoxyamino-3-hydroxythiophanes, respectively, from which trans-4-amino-3-hydroxythiophane is obtained by alkaline hydrolysis. It was established that acid hydrolysis of trans-4-carbethoxyamino-3-hydroxythiophane leads only to trans-4-amino-3-hydroxythiophane, while acid hydrolysis of trans-4-benzoylamino-3-hydroxythiophane is accompanied by inversion to form cis-4-amino-3-hydroxythiophane. Derivatives of the cis- and trans-isomeric pairs of 4-amino-3-hydroxythiophanes were synthesized.Translated from Khimiya Geterotsilicheskikh Soedinenii, No. 12, pp. 1609–1613, December, 1970.     

Frustrated Lewis pair addition to conjugated diynes: formation of zwitterionic 1,2,3-butatriene derivatives

The frustrated Lewis pair B(C(6)F(5))(3)/P(o-tolyl)(3) (4a) reacts with 4,6-decadiyne to give the trans-1,2-addition product 5. In contrast, the B(C(6)F(5))(3)/P(t)Bu(3) FLP (4b) reacts with this substrate to give the trans-1,4-adduct trans-6. The cumulene trans-6 undergoes trans-/cis-isomerization upon photolysis to give a ca. 1:1 trans-6/cis-6 mixture. The FLP 4b reacts with 2,6-hexadiyne at r.t. to yield a ca. 4:1 mixture of their trans-1,2- and trans-1,4-addition products (7,8). DFT calculations showed that the zwitterionic 1,4-addition products are favored under thermodynamic control. Thermolysis of the kinetic trans-1,2-addition product (7) (80 °C, bromobenzene) does not lead to the thermodynamically favored 1,4-isomer (8), but instead elimination of isobutylene occurs to the formal trans-1,2-adduct (9) of the B(C(6)F(5))(3)/PH(t)Bu(2) pair. Compounds 5, 6, 7, 8, 9 were analyzed by X-ray diffraction.