Thermal behavior and decomposition kinetics

The thermal behaviors of [1,1,1-trifluro-3-(2-thenoyl)-acetonato]copper(II) Cu(TTA)₂ and its adducts with pyridine Cu(TTA)₂(Py)₂, 2,2'-bipyridine Cu(TTA)₂(Bpy), quinoline Cu(TTA)₂(Ql)₂, and dimethyl sulfoxide Cu(TTA)₂(DMS) in a nitrogen atmosphere were studied under the non-isothermal conditions by simultaneous TG-DTG-DSC technique. The results showed that the evolution of the solvent molecules generally proceeded before the release of TTA in different ways according to their structures. The Cu(TTA)₂(Bpy) exhibited a unique decomposition pattern due to its distinctive structure. The dependences of activation energy on extent of reaction for all the stage of each compound were determined by using an isoconversional method, Flynn-Wall-Ozawa equation, which show E values varied with reaction progress, indicating the complexity of these decomposition reactions. In addition, the values of activation energy E for TTA molecules evolution are generally higher than that for the solvent molecules release. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal decomposition of RDX from reactive molecular dynamics

We use the recently developed reactive force field ReaxFF with molecular dynamics to study thermal induced chemistry in RDX [cyclic-[CH(2)N(NO(2))](3)] at various temperatures and densities. We find that the time evolution of the potential energy can be described reasonably well with a single exponential function from which we obtain an overall characteristic time of decomposition that increases with decreasing density and shows an Arrhenius temperature dependence. These characteristic timescales are in reasonable quantitative agreement with experimental measurements in a similar energetic material, HMX [cyclic-[CH(2)N(NO(2))](4)]. Our simulations show that the equilibrium population of CO and CO(2) (as well as their time evolution) depend strongly of density: at low density almost all carbon atoms form CO molecules; as the density increases larger aggregates of carbon appear leading to a C deficient gas phase and the appearance of CO(2) molecules. The equilibrium populations of N(2) and H(2)O are more insensitive with respect to density and form in the early stages of the decomposition process with similar timescales.     

Thermal decomposition of alkylcyclohexane mixtures

Thermal decomposition of model alkylcyclohexane mixtures with different ratios of components has been investigated. The possibility to estimate the yield of reaction products by calculating the relative activities of a group of hydrocarbons is shown.

---

. .

     

Thermal decomposition kinetics of polypyrrole and its star shaped copolymer

Thermal behavior of 2,4,6-tris(4-(1H-pyrrol-1-yl)phenoxy)-1,3,5-triazine monomer, polypyrrole, and their star shaped copolymer, were investigated using TG and DTA methods. It was found that Tria melts at 517 K and after than it starts to decompose. Decomposition proceeded in two stages which were corresponding to removal of branched groups and remaining core structure degradation, respectively. Polypyrrole and copolymer showed similar thermal behaviors. These compounds decomposed in three stages which are removal of solvent, removal of dopant anion and rest of structure decomposition. The calculation of activation energies of all reactions were realized using model-free (KAS and FWO) methods. The graphs were prepared which show the alteration of activation energy with decomposition ratio. Thermal analysis results showed that dopant anion and solvent removal activation energy values for copolymer are lower than polypyrrole. Star shaped loose-packed novel structure greatly facilitates solvent and dopant anion removal from copolymer. It can be concluded also that thermal analysis can be used as predict package structure of conducting polymers.     

Thermal decomposition and non-isothermal decomposition kinetics of carbamazepine

The thermal stability and kinetics of isothermal decomposition of carbamazepine were studied under isothermal conditions by thermogravimetry (TGA) and differential scanning calorimetry (DSC) at three heating rates. Particularly, transformation of crystal forms occurs at 153.75°C. The activation energy of this thermal decomposition process was calculated from the analysis of TG curves by Flynn-Wall-Ozawa, Doyle, distributed activation energy model, ?atava-?esták and Kissinger methods. There were two different stages of thermal decomposition process. For the first stage, E and logA [s^?1] were determined to be 42.51 kJ mol^?1 and 3.45, respectively. In the second stage, E and logA [s^?1] were 47.75 kJ mol^?1 and 3.80. The mechanism of thermal decomposition was Avrami-Erofeev (the reaction order, n = 1/3), with integral form G(α) = [?ln(1 ? α)]^1/3 (α = ～0.1–0.8) in the first stage and Avrami-Erofeev (the reaction order, n = 1) with integral form G(α) = ?ln(1 ? α) (α = ～0.9–0.99) in the second stage. Moreover, ΔH ^≠, ΔS ^≠, ΔG ^≠ values were 37.84 kJ mol^?1, ?192.41 J mol^?1 K^?1, 146.32 kJ mol^?1 and 42.68 kJ mol^?1, ?186.41 J mol^?1 K^?1, 156.26 kJ mol^?1 for the first and second stage, respectively.     

Thermal behavior and decomposition kinetics of Formex-bonded explosives containing different cyclic nitramines

Thermal behavior and decomposition kinetics of Formex-bonded PBXs based on some attractive cyclic nitramines, such as 1,3,5-trinitro-1,3,5-triazinane (RDX) and 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX). Actually, cis-1,3,4,6-tetranitrooctahy droimidazo-[4,5-d]imidazole (BCHMX) and 2,4,6,8,10,12-hexanitro-2,4,6,8,10, 12-hexaazaisowurtzitane (CL-20), was investigated by means of nonisothermal thermogravimetry (TG) and differential scanning calorimetry (DSC). It was found that the mass loss rate of PBXs involved in this research depends greatly on heating rate and the residue of the decomposition of these PBXs decreases with the heating rate. The onset of the exotherms was noticed at 215.4, 278.7, 231.2 and 233.7 °C with the peak maximum at 235.1, 279.0, 231.2 and 233.7 °C for RDX-Formex, HMX-Formex, CL-20-Formex, and BCHMX-Formex, respectively. Their corresponding exothermic changes were 1788, 1237, 691, and 1583 J g^?1. It was also observed that the dependence on the heating rate for onset temperatures of HMX- and BCHMX-based PBXs was almost the same due to their similar molecular structure. In addition, based on nonisothermal TG data, the kinetic parameters for thermal decomposition of these PBXs were calculated by isoconversional methods. It was shown that the Formex base has great effects on the activation energy distribution of nitramines. It was further found that the kinetic compensation effects occurred during the thermal decomposition of nitramine-based PBXs, and they almost have the same compensation effects due to similar decomposition mechanism.     

Thermal behavior study and decomposition kinetics of salbutamol under isothermal and non-isothermal conditions

The thermal decomposition of salbutamol (β₂ — selective adrenoreceptor) was studied using differential scanning calorimetry (DSC) and thermogravimetry/derivative thermogravimetry (TG/DTG). It was observed that the commercial sample showed a different thermal profile than the standard sample caused by the presence of excipients. These compounds increase the thermal stability of the drug. Moreover, higher activation energy was calculated for the pharmaceutical sample, which was estimated by isothermal and non-isothermal methods for the first stage of the thermal decomposition process. For isothermal experiments the average values were E _act=130 kJ mol⁻¹ (for standard sample) and E _act=252 kJ mol⁻¹ (for pharmaceutical sample) in a dynamic nitrogen atmosphere (50 mL min⁻¹). For non-isothermal method, activation energy was obtained from the plot of log heating rates vs. 1/T in dynamic air atmosphere (50 mL min⁻¹). The calculated values were E _act=134 kJ mol⁻¹ (for standard sample) and E _act=139 kJ mol⁻¹ (for pharmaceutical sample).     

Thermal decomposition kinetics of strontium oxalate

The thermal decomposition behavior in air of SrC₂O₄ · 1.25H₂O was studied up to the formation of SrO using DTA-TG-DTG techniques. The decomposition proceeds through four well-defined steps. The first two steps are attributed to the dehydration of the salt, while the third and fourth ones are assigned to the decomposition of the anhydrous strontium oxalate into SrCO₃ and the decomposition of SrCO₃ to SrO, respectively. The exothermic DTA peak found at around 300°C is ascribed to the recrystallization of the anhydrous strontium oxalate. On the other hand, the endothermic DTA peak observed at 910°C can be attributed to the transition of orthorhombic-hexagonal phase of SrCO₃. The kinetics of the thermal decomposition of anhydrous strontium oxalate and strontium carbonate, which are formed as stable intermediates, have been studied using non-isothermal TG technique. Analysis of kinetic data was carried out assuming various solid-state reaction models and applying three different computational methods. The data analysis according to the composite method showed that the anhydrous oxalate decomposition is best described by the two-dimensional diffusion-controlled mechanism (D₂), while the decomposition of strontium carbonate is best fitted by means of the three-dimensional phase boundary-controlled mechanism (R₃). The values of activation parameters obtained using different methods were compared and discussed.     

Thermal decomposition kinetics of potassium iodate

The effect of gamma ray irradiation on the rate and kinetics of thermal decomposition of potassium iodate (KIO₃) has been studied by thermogravimetry (TG) under non-isothermal conditions at different heating rates (3, 5, 7, and 10 K min^?1). The thermal decomposition data were analyzed using isoconversional methods of Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose, and Friedman. Irradiation with gamma rays increases the rate of the decomposition and is dependent on the irradiation dose. The activation energy decreases on irradiation. The enhancement of the rate of the thermal decomposition of KIO₃ upon irradiation is due to the combined effect of the production of displacements and extended lattice defects and chemical damage in KIO₃. Non-isothermal model fitting method of analysis showed that the thermal decomposition of irradiated KIO₃ is best described by the contracting sphere model equation, with an activation energy value of ~340 kJ mol^?1.     

Thermal decomposition kinetics of sodium metaperiodate

Aged and fresh samples of sodium metaperiodate are subjected to thermal decomposition studies in air by TG, DTG and DTA techniques. The kinetic parameters for their decomposition have been evaluated by weighted least squares method using equations of Coats-Redfern, Horowitz-Metzger and Freeman-Carroll. The results indicate that, within the limits of experimental error, ageing did not change the E^* values considerably.

---

, . , -, - -. , , , E^*.

     

Thermal decomposition kinetics of potassium iodate

The thermal decomposition of potassium iodate (KIO₃) has been studied by both non-isothermal and isothermal thermogravimetry (TG). The non-isothermal simultaneous TG–differential thermal analysis (DTA) of the thermal decomposition of KIO₃ was carried out in nitrogen atmosphere at different heating rates. The isothermal decomposition of KIO₃ was studied using TG at different temperatures in the range 790–805 K in nitrogen atmosphere. The theoretical and experimental mass loss data are in good agreement for the thermal decomposition of KIO₃. The non-isothermal decomposition of KIO₃ was subjected to kinetic analyses by model-free approach, which is based on the isoconversional principle. The isothermal decomposition of KIO₃ was subjected to both conventional (model fitting) and model-free (isoconversional) methods. It has been observed that the activation energy values obtained from all these methods agree well. Isothermal model fitting analysis shows that the thermal decomposition kinetics of KIO₃ can be best described by the contracting cube equation.     

过氧化二异丙苯的热分解动力学研究

过氧化二异丙苯(DCP)是一种有广泛用途的过氧化物交联剂,具有高的交联效率和优良的交联性能.其分解温度较低,热分解速度较快,即使没有外界能量的作用,在自然储存的条件下也会发生化学反应,放出热量[1,2].     

Thermal decomposition kinetics of potassium iodate

The rate and kinetics of the thermal decomposition of potassium iodate (KIO₃) has been studied as a function of particle size, in the range 63?C150???m, by isothermal thermogravimetry at different temperatures, 790, 795, 800 and 805?K in nitrogen atmosphere. The theoretical and experimental mass loss data are in good agreement for the thermal decomposition of all samples of KIO₃ at all temperatures studied. The isothermal decomposition of all samples of KIO₃ was subjected to both model-fitting and model-free (isoconversional) kinetic methods of analysis. It has been observed that the activation energy values are independent of the particle size. Isothermal model-fitting analysis shows that the thermal decomposition kinetics of all the samples of KIO₃ studied can be best described by the contracting cube equation.     

3,4-二硝基吡唑热分解及非等温动力学

采用TG-DSC综合热分析的方法,对3,4-二硝基吡唑(DNP)的热分解和非等温动力学进行了研究。结果表明DNP的热分解分两阶段进行,并且在升温速率达到15K/min时才能明显区分。分别采用Archar微分法和Coats-Redfen积分法计算了DNP第一阶段热分解反应动力学参数:Ea=91.6kJ.mol-1,lnA=42.7s-1。最可能的DNP热分解机理为随机成核和随后生长机理,符合动力学机理函数Avrami-Erofeev方程,n=3。     

Thermal decomposition kinetics of some aromatic azomonoethers

Thermal analysis of three azomonoether dyes, exhibiting liquid-crystalline properties, was performed in dynamic air atmosphere. Thermal stability studies and the evaluation of the kinetic parameters of each physical or chemical transformations are essential for a full characterization, before attempting accurate thin films’ depositions of such materials used in non-linear optical applications. New synthesized dyes with general formula: where R is a nematogenic group: CN, CF₃ or a highly polarizable group: NO₂ were investigated using TG, DTG, DTA and DSC techniques, under non-isothermal regime. The evolved gases were analyzed by FTIR spectroscopy. The activation energies of the first decomposition step were evaluated for each compound, the obtained results revealing complex mechanisms.     

Thermal decomposition kinetics of nickel fluorenone semicarbazone

Thermal decomposition of nickel fluorenone-semicarbazone has been studied by TG. Thermoanalytical data (TG and DTG) of the chelate are presented. Mass loss considerations at the main decomposition stages indicate conversion of the complex to oxide. Mathematical analysis of TG data shows that first order kinetics is applicable for the first stage and second order to the second stage. Kinetic parameters (energy and entropy of activation and preexponential factor) are reported.

---

. ( ) . . , , — . ( ).