Dissolution Properties of 3,6-Bis(1H-1,2,3,4-tetrazol-5-yl-amino)-1,2,4,5-tetrazine in N-Methyl Pyrrolidone and Dimethyl Sulfoxide

The molar enthalpies of dissolution for 3,6-bis(1H-1,2,3,4-tetrazol-5-yl-amino)-1,2,4,5-tetrazine (BTATz) were measured in N-methyl-2-pyrrolidone (NMP) and dimethyl sulfoxide (DMSO) using an RD496-2000 Calvet microcalorimeter at 298.15 K under atmospheric pressure. Empirical formulae for the calculation of the molar enthalpies of dissolution (Δ_diss H), relative partial molar enthalpies (Δ_diss H _partial), and relative apparent molar enthalpies (Δ_diss H _apparent) were obtained from the experimental results of the dissolution processes of BTATz in NMP or DMSO. Furthermore, the corresponding kinetic equations describing the two dissolution processes are dα/dt = 10^?3.55(1 ? α)^0.57 for the dissolution of BTATz in NMP, and dα/dt = 10^?3.74(1 ? α)^0.63 for the dissolution of BTATz in DMSO, respectively.     

Dissolution properties of hexanitrohexaazaisowurtzitane (CL-20) in ethyl acetate and acetone

The enthalpies of dissolution in ethyl acetate and acetone of hexanitrohexaazaisowurtzitane (CL-20) were measured by means of a RD496-2000 Calvet microcalorimeter at 298.15 K, respectively. Empirical formulae for the calculation of the enthalpy of dissolution (Δ_diss H), relative partial molar enthalpy (Δ_diss H _partial), relative apparent molar enthalpy (Δ_diss H _apparent), and the enthalpy of dilution (Δ_dil H _1,2) of each process were obtained from the experimental data of the enthalpy of dissolution of CL-20. The corresponding kinetic equations describing the two dissolution processes were \frac\textda\textdt = 1.60 ×10 ^{- 2} (1 - a)^0.84 {\frac{{{\text{d}}\alpha }}{{{\text{d}}t}}} = 1.60 \times 10^{ - 2} (1 - \alpha )^{0.84} for dissolution process of CL-20 in ethyl acetate, and \frac\textda\textdt = 2.15 ×10 ^{- 2} (1 - a)^0.89 {\frac{{{\text{d}}\alpha }}{{{\text{d}}t}}} = 2.15 \times 10^{ - 2} (1 - \alpha )^{0.89} for dissolution process of CL-20 in acetone.     

The enthalpies and kinetic of dissolution of diterpenoid derivative—paclitaxel in aqueous NaCl solutions at 309.5 K

The enthalpies of dissolution of paclitaxel in normal saline were measured using a RD496-2000 Calvet Microcalorimeter at 309.65 K under atmospheric pressure. The differential enthalpy (Δ_dif H _m ) and molar enthalpy (Δ_sol H _m) of dissolution of paclitaxel innormal saline were determined. The corresponding kinetic equation described the dissolution process was elucidated to be dα/dt = 10^?3.57(1 ? a)^1.15. Moreover, the half-life, Δ_sol H _m , Δ_sol G _m and Δ_sol S _m of the dissolution process were also obtained. This work will provide a potential reference for the clinical application of paclitaxel.     

Solubility and Solution Thermodynamic Properties of 4-(4-Hydroxyphenyl)-2-butanone (Raspberry Ketone) in Different Pure Solvents

The solubility of 4-(4-hydroxyphenyl)-2-butanone (raspberry ketone) in six pure solvents was experimentally determined at temperatures ranging from 283.15 to 313.15 K under the pressure 0.10 MPa by employing a gravimetrical method. The experimental results indicate that the solubility of raspberry ketone in all studied solvents is temperature dependent, a rise in temperature brings about an increase in solubility. The experimental solubility data of raspberry ketone in six pure solvents (acetone, ethanol, ethyl acetate, n-propyl alcohol, n-butyl alcohol, and distilled water) was correlated by using several commonly used thermodynamic models, including the Apelblat, van’t Hoff and λh equations. The results of the error analysis indicate that the van’t Hoff equation was able to give more accurate and reliable predictions of solubility with root-mean-square deviation less than 0.56%. Furthermore, the changes of dissolution enthalpies (Δ_diss H°), dissolution entropies (Δ_diss S°) and dissolution Gibbs energies (Δ_diss G°) of raspberry ketone in the solvents studied were estimated by the van’t Hoff equation. The positive value of Δ_diss H°, Δ_diss S°, and Δ_diss G° indicated that these dissolution processes of raspberry ketone in the solvents studied were all endothermic and enthalpy-driven.     

Effect of Organic Loading Rate and Fill Time on the Biohydrogen Production in a Mechanically Stirred AnSBBR Treating Synthetic Sucrose-Based Wastewater

This study investigated the feasibility to produce biohydrogen of a mechanically stirred anaerobic sequencing batch biofilm reactor (AnSBBR) treating sucrose-based synthetic wastewater. The bioreactor performance (30 °C) was evaluated as to the combined effect of fill time (2, 1.5, and 1 h), cycle length (4, 3, and 2 h), influent concentration (3,500 and 5,250 mg chemical oxygen demand (COD)?L^?1) and applied volumetric organic load (AVOL_CT from 9.0 to 27.0 g COD L^?1 d^?1). AVOLs were varied according to influent concentration and cycle length (t _C). The results showed that increasing AVOL_CT resulted in a decrease in sucrose removal from 99 to 86 % and in improvement of molar yield per removed load (MYRL_S.n) from 1.02 mol H₂?mol carbohydrate^?1 at AVOL_CT of 9.0 g COD L^?1 d^?1 to maximum value of 1.48 mol H₂?mol carbohydrate^?1, at AVOL_CT of 18.0 g COD L^?1 d^?1, with subsequent decrease. Increasing AVOL_CT improved the daily molar productivity of hydrogen (MPr) from 15.28 to 49.22 mol H₂?m^?3 d^?1. The highest daily specific molar productivity of hydrogen (SMPr) obtained was 8.71 mol H₂?kg TVS^?1 d^?1 at an AVOL_CT of 18.0 g COD L^?1 d^?1. Decreasing t _C from 4 to 3 h decreased sucrose removal, increased MPr, and improved SMPr. Increasing influent concentration decreased sucrose removal only at t _C of 2 h, improved MYRL_S,n and MPr at all t _C, and also improved SMPr at t _C of 4 and 3 h. Feeding strategy had a significant effect on biohydrogen production; increasing fill time improved sucrose removal, MPr, SMPr, and MYRL_S,n for all investigated AVOL_CT. At all operational conditions, the main intermediate metabolic was acetic acid followed by ethanol, butyric, and propionic acids. Increasing fill time resulted in a decrease in ethanol concentration.     

To determine the half-life for gemcitabine hydrochloride using microcalorimetry

The enthalpies of dissolution of gemcitabine hydrochloride in 0.9 % normal saline (medical) and citric acid solution were measured using a microcalorimeter at 309.65 K under atmospheric pressure. The differential enthalpy $ \left( {\Updelta_{\text{dif}} H_{\text{m}}^{{{\theta}}} } \right) $ and molar enthalpy $ \left( {\Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} } \right) $ of dissolution were determined, respectively. The corresponding kinetic equation described the dissolution were elucidated to be da/dt = 10^?3.84(1 ? a)^0.92 and da/dt = 10^?3.80(1 ? a)^1.21. Besides, the half-life, $ \Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} ,\;\Updelta_{\text{sol}} G_{\text{m}}^{{{\theta}}} $ and $ \Updelta_{\text{sol}} S_{\text{m}}^{{{\theta}}} $ of the dissolution were also obtained. Obviously, it will provide a simple and reliable method for the clinical application of gemcitabine hydrochloride.     

Etudes calorimetriques en milieu solvant organique. V. Enthalpies de dissolution de l'alanate de sodium,NaAlH4, dans le tetrahydrofuranne

The enthalpies of dissolution of sodium tetrahydridoaluminate NaAlH₄ in THF have been determined for different concentrations. The enthalpies of dissolution and dilution are exothermic from 1 to 7 · 10^?3 M. The enthalpy of dissolution at infinite dilution has been calculated: ΔH^∝_diss = ?6.38 kcal mole^?1.     

Synthesis, structure analysis and thermodynamics of [Ni(H2O)4(TO)2](NO3)2·2H2O (TO = 1,2,4-triazole-5-one)

A novel complex [Ni(H₂O)₄(TO)₂](NO₃)₂·2H₂O (TO = 1,2,4-triazole-5-one) was synthesized and structurally characterized by X-ray crystal diffraction analysis. The decomposition reaction kinetic of the complex was studied using TG-DTG. A multiple heating rate method was utilized to determine the apparent activation energy (E _a) and pre-exponential constant (A) of the former two decomposition stages, and the values are 109.2 kJ mol^?1, 10^13.80 s^?1; 108.0 kJ mol^?1, 10^23.23 s^?1, respectively. The critical temperature of thermal explosion, the entropy of activation (ΔS ^≠), enthalpy of activation (ΔH ^≠) and the free energy of activation (ΔG ^≠) of the initial two decomposition stages of the complex were also calculated. The standard enthalpy of formation of the new complex was determined as being ?1464.55 ± 1.70 kJ mol^?1 by a rotating-bomb calorimeter.     

Molar heat capacities and standard molar enthalpy of formation of pyrimethanil butanedioic salt

A noval anilino-pyrimidine fungicide, pyrimethanil butanedioic salt (C₂₈H₃₂N₆O₄), was synthesized by a chemical reaction of pyrimethanil and butanedioic acid. The low-temperature heat capacities of the compound were measured with an adiabatic calorimeter from 80 to 380 K. The thermodynamic function data relative to 298.15 K were calculated based on the heat capacity fitted curve. The thermal stability of the compound was investigated by TG and DSC. The TG curve shows that pyrimethanil butanedioic salt starts to sublimate at 455.1 K and totally changes into vapor when the temperature reaches 542.5 K with the maximal speed of weight loss at 536.8 K. The melting point, the molar enthalpy (Δ_fus H _m), and entropy (Δ_fus S _m) of fusion were determined from its DSC curves. The constant-volume energy of combustion (Δ_c U _m) of pyrimethanil butanedioic salt was measured by an isoperibol oxygen-bomb combustion calorimeter at T = (298.15 ± 0.001) K. From the Hess thermochemical cycle, the standard molar enthalpy of formation was derived and determined to be Δ_f H _m ^o (pyrimethanil butanedioic salt)=?285.4 ± 5.5 kJ mol^?1.     

Thermochemical properties of hydrazinium dipicrylamine in N-methyl pyrrolidone and dimethyl sulfoxide

The enthalpies of dissolution for Hydrazinium Dipicrylamine (HDPA) in N-methyl pyrrolidone (NMP) and dimethyl sulfoxide (DMSO) were measured using a RD496-2000 Calvet microcalorimeter at 298.15 K. Empirical formulae for the calculation of the enthalpies of dissolution (Δ_diss H) were obtained from the experimental data of the dissolution processes of HDPA in NMP and DMSO. The linear relationships between the rate (k) and the amount of substance (a) were found. The corresponding kinetic equations describing the two dissolution processes were $ {{\text{d}\alpha } \mathord{\left/ {\vphantom {{\text{d}\alpha} {\text{d}t}}} \right. \kern-0pt} {\text{d}t}} = 10^{ - 2.71}\left( {1 - \alpha } \right)^{1.23} $ d α / d t = 10 ? 2.71 ( 1 ? α ) 1.23 for the dissolution of HDPA in NMP, and $ {{\text{d}\alpha } \mathord{\left/ {\vphantom {{\text{d}\alpha} {\text{d}t}}} \right. \kern-0pt} {\text{d}t}} = 10^{ - 2.58}\left( {1 - \alpha } \right)^{0.81} $ d α / d t = 10 ? 2.58 ( 1 ? α ) 0.81 for the dissolution of HDPA in DMSO, respectively.     

Low-temperature heat capacity and standard thermodynamic functions of 1-butyl-3-methylimidazolium lactate

The heat capacities of 1-butyl-3-methylimidazolium lactate ionic liquids ([C₄mim][Lact]) were measured with a highly accurate automatic adiabatic calorimeter over the temperature range from 79 to 406 K. And the experimental values of molar heat capacities were fitted to a polynomial equation using least square method in the appropriate temperature ranges. The standard molar heat capacity was determined to be 1734.46?±?5.12 J K^?1 mol^?1 at 298.15 K. The molar enthalpy and molar entropy of the transition were determined to be 15.575?±?0.045 and 64.44?±?0.14 J K^?1 mol^?1. Other thermodynamic properties, such as (H_T???H_298.15) and (S_T???S_298.15), were also calculated. Furthermore, when the temperature reaches 241.87 K, the strongest peaks appeared by analysis of the heat capacity curve. This phenomenon could be explained from the interionic interaction, which is the hydrogen bond between the anions and cations.     

Investigation of hydrogen desorption from CaSiH by means of calorimetric method

The present work deals with the study of the reaction of hydrogen desorption from the CaSiH_X hydride by means of the calorimetric method. The dehydrogenation of the CaSiH_X hydride was carried out at 548 K. For a calorimetric study, the installation composed of the differential heat-conducting Tian–Calvet type calorimeter connected with a conventional Sieverts-type apparatus was employed. Such installation permitted us to obtain simultaneously the P-X isotherms (P—equilibrium hydrogen pressure, X = H/CaSi) and variation of the partial molar enthalpies of the reaction of hydrogen desorption from CaSiH_X with the hydrogen concentration in the metallic matrix. It was ascertained that in the CaSi-H₂ system there was one region where values of the partial molar enthalpy of the reaction of hydrogen desorption from the CaSiH_X hydride remained constant. This means that formation of one hydride phase in the CaSi-H₂ system took place. The enthalpy and entropy values for the reaction of hydrogen desorption from the CaSiH_X in the plateau range are ΔH _des = 53.8 ± 1.2 kJ mol^?1 H₂ and ΔS _des = 94.2 ± 2.7 J mol^?1 H₂ K^?1 (ΔH _des and ΔS _des—the differential molar enthalpy and entropy desorption, respectively).     

Chemical and electrochemical behavior of metallic technetium in acidic media

The chemical and electrochemical properties of technetium metal were studied in 1–6 M HX and in 1 M NaX (pH 1 and 2.5), X = Cl, NO₃. The chemical dissolution rates of Tc metal were higher in HNO₃ than in HCl (i.e. 8.63 × 10^?5 mol cm^?2 h^?1 in 6 M HNO₃ versus 2.05 × 10^?9 mol cm^?2 h^?1 in 6 M HCl). The electrochemical dissolution rates in HNO₃ and HCl were similar and mainly depended on the electrochemical potential and the acid concentration. The optimum dissolution of Tc metal was obtained in 1 M HNO₃ at 1 V/AgAgCl (1.70 × 10^?3 mol cm^?2 h^?1). The dissolution potentials of Tc metal in nitric acid were in the range of 0.596–0.832 V/AgAgCl. Comparison of Tc behavior with Mo and Ru indicated that in HNO₃, the dissolution rate followed the order: Mo > Tc > Ru, and for dissolution potential the order: E _diss(Ru) > E _diss(Tc) > E _diss(Mo). The corrosion products of Tc metal were analyzed in HCl solution by UV–Visible spectroscopy and showed the presence of TcO₄ ^?. The surface of the electrode was characterized by microscopic techniques; it indicated that Tc metal preferentially corroded at the scratches formed during the polishing and no oxide layer was observed.     

Incident investigation on thermal instability of an intermediate using adiabatic calorimeter

Thermal instability is a loss of thermal control which liberates high amount of energy and pressure. An incident took place during drying of an intermediate having amino alcohol functional group in agitated nutsche filter dryer at plant scale. During our investigation using advanced reactive system screening tool (ARSST), thermal decomposition was observed. Onset temperature of decomposition (T _o) is at 85 °C, adiabatic temperature rise due to decomposition (ΔT _ad) is 215 °C, maximum temperature attained due to decomposition (T _max) is 300 °C, maximum self-heat rate (dT/dt)_max is 6,215 °C min^?1, and maximum rate of pressure rise (dP/dt)_max is 1,442 psi min^?1 obtained from ARSST experiments. T _D24 value is 75 °C which was estimated experimentally. The correlations of these results were utilized to identify the root cause of this incident and necessary control measures were taken accordingly.     

Thermochemical Properties and Non-isothermal Decomposition Reaction Kinetics of N-Guanylurea Dinitramide （GUDN）

Introduction N-Guanylurea dinitramide (GUDN) is a new ener-getic oxidizer with higher energy and lower sensitivity. Its crystal density is 1.755 g·cm-3. The detonation velocity is about 8210 m·s-1. Its specific impulse and pressure exponent are 213.1 s and 0.73, respectively. It has the potential for possible use as an energy ingredient of propellants and explosives from the point of view of the above-mentioned high performance. Its preparation,1 properties2 and hygroscopocity2 have been …     

Heat capacities and standard molar enthalpy of formation of pyrimethanil maleic salt and pyrimethanil fumaric salt

Novel anilino-pyrimidine fungicides, pyrimethanil maleic salt, and pyrimethanil fumaric salt (C₂₈H₃₀N₆O₄) were synthesized by a chemical reaction of pyrimethanil with maleic acid/fumaric acid. The low-temperature heat capacities of the two compounds were measured with an adiabatic calorimeter from 80 to 350 K. The heat capacities of pyrimethanil fumaric salt are bigger than that of pyrimethanil maleic salt in the measurement temperature range. The thermodynamic function data relative to 298.15 K were calculated based on the heat capacity-fitted curves. The melting points, the molar enthalpies (Δ_fus H _m), and entropies (Δ_fus S _m) of fusion of pyrimethanil maleic salt and pyrimethanil fumaric salt were determined from their DSC curves. The values indicate that pyrimethanil fumaric salt was more thermostable than pyrimethanil maleic salt. The constant-volume energies of combustion (Δ_c U _m ^o ) of pyrimethanil maleic salt and pyrimethanil fumaric salt were measured using an isoperibol oxygen bomb combustion calorimeter at T = (298.15 ± 0.001) K. From the Hess thermochemical cycle, the standard molar enthalpies of formation of the two compounds were derived and determined to be Δ_f H _m ^o (pyrimethanil maleic salt) = ?459.3 ± 4.9 kJ mol^?1 and Δ_f H _m ^o (pyrimethanil fumaric salt) = ?557.2 ± 4.8 kJ mol^?1, respectively. The results suggest that pyrimethanil fumaric salt is more chemically stable than pyrimethanil maleic salt.     

Thermochemistry of the Dissolution of Dipeptides Containing DL-α-Alanine in Aqueous Solutions of Sodium Dodecyl Sulfate at 298.15 K

Enthalpies of the dissolution of DL-α-alanylglycine (AlaGly), DL-α-alanyl-DL-α-alanine (AlaAla), DL-α-alanyl-DL-α-valine (AlaVal), and DL-α-alanyl-DL-norleucine (AlaNln) in an aqueous solution of sodium dodecyl sulfate (SDS) at SDS concentration of m = 0–0.07 mol kg^?1 and temperature Т = 298.15 K are measured via calorimetry. The standard values of the enthalpy of dissolution (Δ_solH ^m ) and the transfer of dipeptides (Δ_trH ^m ) from water to aqueous SDS solutions are calculated using the experimental data. The dependences of Δ_solH ^m and Δ_trH ^m the SDS concentration at a constant concentration of dipeptide are established. Thermochemical characteristics of the transfer of AlaGly, AlaAla, AlaVal, and AlaNln in the investigated range of SDS concentrations are compared. The results are interpreted by considering ion–ion, ion–polar, and hydrophobic–hydrophobic interactions between SDS and dipeptide molecules.     

Thermal study on decomposition of LiBH4 at non-isothermal and non-equilibrium conditions

Thermal decomposition measurements for lithium borohydride (LiBH₄) are performed at non-isothermal and non-equilibrium conditions by means of differential thermal analysis (DTA). A simplified alternative procedure is introduced for evaluating thermodynamic and kinetic parameters simultaneously using a single set of measurements. Rate constant (k) and enthalpy (ΔH = ?102.1 ± 0.7 kJ mol^?1 LiBH₄) are archived. Temperature dependence for activation energy (E _a) is found taking advantage of Guggenheim–Arrhenius method; the mean activation energy is $ \overline{E}_{a} $  93.9 ± 0.9 kJ mol^?1 LiBH₄ in the range of heating rate β 1–50 K min^?1.     

Ionization enthalpy of benzoic acid in water—dimethylsulfoxide mixtures

The ionization enthalpy of benzoic acid has been measured calorimetrically at 25°C in H₂ODMSO mixtures ranging from pure water to a maximum DMSO molar ratio X_DMSO = 0.80. With the increase of DMSO content, the ionization becomes more and more endothermic, and for X_DMSO = 0.8 the ionization enthalpy is about 6 kcal mol^?1 higher than in water. By also measuring the solution enthalpy of crystalline benzoic acid in the mixtures, it has been shown that the solvation of the undissociated molecule is the main cause for the increase of the dissociation enthalpy. A comparison has been made between the relative enthalpies of benzoic and hydroxide ions in H₂ODMSO mixtures.     

Solubility of gallic acid in liquid mixtures of (ethanol + water) from (293.15 to 318.15) K

The solubility of gallic acid in (water + ethanol) binary solvents was determined from (293.15 to 318.15) K at atmospheric pressure using a thermostatted reactor and UV/vis spectrophotometer analysis. The effects of binary solvents composition and temperature on the solubility were discussed. It was found that gallic acid solubility in (water + ethanol) mixed solvents presents a maximum-solubility effect. Two empirical equations were proposed to correlate the solubility data. The calculated solubilities show good agreement with the experimental data within the studied temperature range. Using the experimentally measured solubilities, the thermodynamic properties of dissolution of the gallic acid such as Gibbs energy (Δ_solG°), molar enthalpy of dissolution (Δ_solH°), and molar entropy of dissolution (Δ_solS°) were calculated.