A new strategy to prepare surface-enhanced Raman scattering-active substrates by electrochemical pulse deposition of gold nanoparticles

In this communication, we develop a simple pathway to prepare SERS-active substrates with Au nanoparticles (NPs) by an electrochemical strategy of deposition-dissolution cycles (DDCs). The prepared SERS-active substrates demonstrate large Raman scattering enhancement for Rhodamine 6G (R6G) with a detection limit of 2 × 10(-12) M and an enhancement factor of 5.8 × 10(7).     

High-yield synthesis of multi-branched gold nanoparticles and their surface-enhanced Raman scattering properties

Multi-branched gold nanoparticles were synthesized in high-yield through the reduction of HAuCl(4) by using hydrazine as a reducing agent. Practically 100% of the particles have numerous branches. The high reduction capability of hydrazine is found to be crucial for the formation of these branched gold nanoparticles. Their size can be controlled from 20 to 130 nm by varying the amounts of hydrazine. The prepared nanoparticles exhibit efficient surface-enhanced Raman scattering (SERS) properties and the SERS activity of the particles depends on the aspect ratio of their branches, which are most likely related to a great increase in the localized electromagnetic field enhancement from their unique sharp surface features arising from the branches.     

Electrochemical deposition of silver nanoparticles in multiwalled carbon nanotube-alumina-coated silica for surface-enhanced Raman scattering-active substrates

The work presents a novel surface-enhanced Raman scattering (SERS)-active surface prepared by electrochemical deposition of silver nanoparticles in multiwalled carbon nanotube (MWCNT)–alumina-coated silica (ACS) nanocomposite. The formation of Ag nanoparticles in MWCNT–ACS nanocomposite was investigated by scanning electron microscopy. It shows that Ag nanoparticles with a diameter of about 100–200 nm in the MWCNT–ACS nanocomposite and some Ag nanoparticles aggregated to form interconnected aggregates. The Ag–MWCNT–ACS-coated indium tin oxide substrate has a considerable effect on the Raman spectra with improvements of more than four times of magnitude as compared with the Ag-coated indium tin oxide substrate. The present methodology demonstrates that the composite composed of Ag, MWCNT, and ACS is suitable for potential plasmonic devices.     

Silver overlayer-modified surface-enhanced Raman scattering-active gold substrates for potential applications in trace detection of biochemical species

Because Ag and Au nanoparticles (NPs) possess well-defined localized surface plasmon resonance (LSPR) they are popularly employed in the studies of surface-enhanced Raman scattering (SERS). As shown in the literature and in our previous studies, the advantage of SERS-active Ag NPs is their higher SERS enhancement over Au NPs. On the other hand, the disadvantage of SERS-active Ag NPs compared to Au NPs is their serious decay of SERS enhancement in ambient laboratory air. In this work, we develop a new strategy for preparing highly SERS-active Ag NPs deposited on a roughened Au substrate. This strategy is derived from the modification of electrochemical underpotential deposition (UPD) of metals. The coverage of Ag NPs on the roughened Au substrate can be as high as 0.95. Experimental results indicate that the SERS of Rhodamine 6G (R6G) observed on this developed substrate exhibits a higher intensity by ca. 50-fold of magnitude, as compared with that of R6G observed on the substrate without the deposition of Ag NPs. The limit of detection (LOD) for R6G measured on this substrate is markedly reduced to 2 × 10⁻¹⁵ M. Moreover, aging of SERS effect observed on this developed substrate is significantly depressed, as compared with that observed on a generally prepared SERS-active Ag substrate. These aging tests were performed in an atmosphere of 50% relative humidity (RH) and 20% (v/v) O₂ at 30 °C for 60 day. Also, the developed SERS-active substrate enables it practically applicable in the trace detection of monosodium urate (MSU)-containing solution in gouty arthritis without a further purification process.     

Controllable synthesis of water-soluble gold nanoparticles and their applications in electrocatalysis and surface-enhanced Raman scattering

We report a facile method to synthesize water-soluble gold nanoparticles (AuNPs) using a biosurfactant sodium cholate as reducing reagents and protective groups in aqueous solution at ambient temperature. The diameters (13-70 nm) of uniform AuNPs can be readily adjusted by changing the initial molar ratio of sodium cholate to chloroauric acid (HAuCl(4)). Also, the alkaline condition of preparative solution is found to affect the size of as-synthesized AuNPs. This synthetic approach is one-step and "green". The obtained AuNPs exhibit a good electrocatalytic activity toward methanol oxidation. Meanwhile, the AuNPs thin films can serve as an efficient substrate for surface-enhanced Raman scattering (SERS). Furthermore, platinum nanoparticles (PtNPs) are also prepared by reducing sodium tetrachloro platinate hydrate with sodium cholate.     

In situ controlled growth of well-dispersed gold nanoparticles in TiO2 nanotube arrays as recyclable substrates for surface-enhanced Raman scattering

In this paper, well-aligned Au-decorated TiO(2) nanotube arrays with high surface-enhanced Raman scattering (SERS) enhancement were prepared using a facile in situ reduction and controlled growth approach. The gold nanoparticles are well-dispersed and assembled on the mouth surface and the inside of the TiO(2) nanotubes without clogging. The structure and optical properties of the Au-decorated TiO(2) nanotube arrays have been characterized. The Au-decorated TiO(2) nanotube arrays were employed as SERS-active substrates, which exhibit good performance due to long-range coupling between Au nanoparticles, and TiO(2)-assisted enhanced charge-transfer from Au to Rh6G. The SERS activity of the substrates strongly depends on the crystallite size and level of aggregation. The substrates display significant fluorescence quenching ability and uniform SERS responses throughout the whole surface area. Particularly, good recyclability is shown. The photocatalytic property of Au-decorated TiO(2) nanotube array was exploited to recycle the substrate through UV light photocatalytic purification. The experimental results showed that the substrate is featured by high reproducibility and can be used as a highly efficient SERS substrate for multiple detection of different chemical and biological molecules.     

Composite silicate films with gold nanoparticles for surface-enhanced Raman spectroscopy: synthesis using natural products

Hybrid organic–inorganic films containing gold nanoparticles were obtained by the sol–gel method by hydrolytic polycondensation of tetraethoxysilane in aqueous solutions of honey containing HAuCl₄ with an acidic catalyst (HCl). The films were examined by absorption and Raman spectroscopy (RS), transmission electron microscopy, and atomic-force scanning microscopy. It was shown that enhancement (3–5 times) of the Raman spectra is observed in the region of gold nanoparticle aggregates, and this predetermines the potential of such materials as supports for surface-enhanced Raman spectroscopy.     

Electrochemically prepared surface-enhanced Raman scattering-active silver substrates with improved stabilities

New Hofmann type clathrates in the form of M(pp)₂Ni(CN)₄·2G (where pp = 1-phenylpiperazine, G = 1,4-dioxane and M = Ni, Co or Cd) have been prepared in powder form and their FT-IR and FT-Raman spectra are reported. The results suggest that the present compounds are similar in structure to the Hofmann type clathrates and their structures consist of conjugated polymeric layers of |M–Ni(CN)₄|_∞ with the pp bound to the metal (M) atom.     

Essential nanogap effects on surface-enhanced Raman scattering signals from closely spaced gold nanoparticles

We have demonstrated the essential nanogap effects on surface-enhanced Raman scattering (SERS) signals obtained from two diagonally aligned gold nanoparticles with several nanometre separations, which were precisely fabricated on a glass substrate. This is the first proof of principle for extracting the light localization effects on SERS due to the formation of nanogaps from experimentally observed SERS signals.     

Porous GaN as a template to produce surface-enhanced Raman scattering-active surfaces

Surface-enhanced Raman spectroscopy (SERS) substrates have been prepared by depositing Au or Ag on porous GaN (PGaN). The PGaN used as the template for the metal deposition in these studies was generated by a Pt-assisted electroless etching technique. PGaN was chosen as a potential SERS template due to its nanostructured surface and high surface area, two characteristics that are important for SERS substrates. Metal films were deposited either by solution-based electroless deposition or by thermal vacuum evaporation. SERS spectra were recorded at lambda = 752.5 nm for Au films and at lambda = 514.5 nm for Ag films deposited on PGaN. The SERS signal strength across the metal coated PGaN substrates was uniform and was not plagued by "hot" or "cold" spots on the surface, a common problem with other SERS surfaces. The Ag film deposited by electroless deposition had the highest overall SERS response, with an enhancement factor (EF) relative to normal Raman spectroscopy of 10(8). A portion of the increase in EF relative to typical SERS-active substrates can be assigned to the large surface area characteristic of the PGaN-Ag structures, but some of the enhancement is intrinsic and is likely related to the specific morphology of the metal-nanopore composite structure.     

Self-assembly and encoding of polymer-stabilized gold nanoparticles with surface-enhanced Raman reporter molecules

Polymer-stabilized gold nanoparticles (AuNPs) were prepared and encoded with a range of surface-enhanced Raman reporter molecules. A range of as-synthesized polymers produced by reversible addition fragmentation chain transfer (RAFT) polymerization were demonstrated to self-assemble at the surface of AuNPs dispersed in water. The method involved the coprecipitation of polymer-gold conjugates by the addition of polymer dissolved in a water-miscible solvent to gold AuNPs dispersed in water. This method represents a simplification of the preparation of polymer-stabilized AuNPs compared with other published methods, in that the AuNPs do not need to be first transferred to an organic solvent. The process enabled the polymer stabilized AuNPs to be easily recovered by filtration or by phase transfer of the AuNPs to an organic solvent in which the RAFT polymer was soluble. The polymer-stabilized AuNPs were characterized by a range of methods including UV-visible spectrophotometry, transmission electron microscopy, thermogravimetric analysis, dynamic light scattering, and attenuated total reflection Fourier transform infrared spectroscopy. Furthermore, 1H pulsed field gradient spin echo NMR was utilized to characterize the self-diffusion of the polymer-stabilized AuNPs. Finally, we then demonstrated that these polymer-stabilized AuNPs maintained their ability to be encoded with surface-enhanced Raman spectroscopy reporter molecules.     

pH effect on surface potential of polyelectrolytes-capped gold nanoparticles probed by surface-enhanced Raman scattering

Nanoparticles are commonly stabilized through the adsorption of acidic/basic polyelectrolytes around the surface of the particle. One example of these nanoparticles is poly(ethylenimine) (PEI)-capped Au nanoparticles. In this work, we have examined by means of surface-enhanced Raman scattering (SERS) of 2,6-dimethylphenylisocyanide (2,6-DMPI) how much the surface potential of Au nanoparticles is affected by the solution pH through the mediation of the protonation and deprotonation of PEI in contact with Au nanoparticles. In fact, the surface-potential-dependent isocyanide (NC) stretching peak of 2,6-DMPI has shifted sharply around pH 8.5, close to the pK(a) value of the primary amine of PEI. When a negatively charged poly(acrylic acid) (PAA) was deposited onto the PEI, the peak shift of the NC stretching band took place around pH 6.5, close to the average pK(a) value of PEI and PAA. When additional PEI was deposited on PAA, the peak shift of the NC stretching band occurred once again around pH 8.5, indicative of the stronger interaction of upper two polyelectrolyte layers. These data clearly illustrate the usefulness of SERS in the elucidation of a delicate interaction of cationic and anionic polyelectrolytes, especially in layer-by-layer deposition.     

Size-controllable synthesis of monodispersed SnO2 nanoparticles and application in electrocatalysts

Size-controllable tin oxide nanoparticles are prepared by heating ethylene glycol solutions containing SnCl(2) at atmospheric pressure. The particles were characterized by means of transmission electron microscopic (TEM), X-ray diffraction (XRD) studies. TEM micrographs show that the obtained material are spherical nanoparticles, the size and size distribution of which depends on the initial experimental conditions of pH value, reaction time, water concentration, and tin precursor concentration. The XRD pattern result shows that the obtained powder is SnO(2) with tetragonal crystalline structure. On the basis of UV/vis and FTIR characterization, the formation mechanism of SnO(2) nanoparticles is deduced. Moreover, the SnO(2) nanoparticles were employed to synthesize carbon-supported PtSnO(2) catalyst, and it exhibits surprisingly high promoting catalytic activity for ethanol electrooxidation.     

Rapid detection of melamine with 4-mercaptopyridine-modified gold nanoparticles by surface-enhanced Raman scattering

A surface-enhanced Raman scattering (SERS) strategy based on 4-mercaptopyridine (MPY)-modified gold nanoparticles (AuNPs) was developed for the rapid and sensitive detection of melamine in milk powder. The SERS measurement of melamine strongly relied on the “hotspot” effect, in which AuNPs immediately aggregated upon the addition of melamine, leading to significantly enhanced Raman intensity of the reporter molecule MPY and a color change for the solution from red to blue-gray. The limit of detection based on a signal to noise of 3 (S/N = 3) was found to be as low as 0.1 ppb of melamine, with an excellent linearity of 0.5–100 ppb, demonstrating a higher sensitivity and a wider quantitation range than direct SERS sensing methods based on enhanced substrate. An impressive specificity for melamine detection over various common metal ions and excipients in dairy products, even at concentrations of 100-fold higher than melamine, was achieved. Good recoveries of 88.5% and 111.7% were obtained from milk samples spiked to 20 and 100 ppb levels, respectively. The proposed method is potentially applicable for the rapid in situ determination of melamine in complex matrices.     

Surfactantless photochemical deposition of gold nanoparticles on an optical fiber core for surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) probes based on gold nanoparticles modifying the core of the optical fiber were made by a surfactantless photochemical deposition method. The growth kinetics and shape evolution of gold nanoparticles depending on different experimental conditions were studied. It was found that, under the condition of detectable gold nanoparticle deposition, increasing the concentration of chloroauric acid (HAuCl(4)) was not conducive to the deposition whereas increasing the concentration of sodium citrate (Na(3)Ct) would speed up the deposition. By controlling the concentration of the reaction solution and irradiation time, we obtained fused spherical-like, spherical, and flowerlike gold nanoparticles. To test the SERS activity of the probes, the SERS spectra of a rhodamine 6G aqueous solution were recorded in direct detection mode and remote mode. We have also developed a new approach to improving the SERS sensitivity when detecting in remote mode.     

Characterization of surface water on Au core Pt-group metal shell nanoparticles coated electrodes by surface-enhanced Raman spectroscopy

We utilized the strategy of 'borrowing SERS activity', by chemically coating several atomic layers of a Pt-group metal on highly SERS-active Au nanoparticles, to obtain the first SERS (also Raman) spectra of surface water on Pt and Pd metals, and propose conceptual models for water adsorbed on Pt and Pd metal surfaces.     

Focused-ion-beam-fabricated Au nanorods coupled with Ag nanoparticles used as surface-enhanced Raman scattering-active substrate for analyzing trace melamine constituents in solution

A well-ordered Au-nanorod array with a controlled tip ring diameter (Au_NRs_d) was fabricated using the focused ion beam method. Au_NRs_d was then coupled with Ag nanoparticles (Ag NPs) to bridge the gaps among Au nanorods. The effect of surface-enhanced Raman scattering (SERS) on Au_NRs_d and Ag NPs/Au_NRs_d was particularly verified using crystal violet (CV) as the molecular probe. Raman intensity obtained from a characteristic peak of CV on Au_NRs_d was estimated by an enhancement factor of ≈10⁷ in magnitude, which increased ≈10¹² in magnitude for that on Ag NPs/Au_NRs_d. A highly SERS-active Ag NPs/Au_NRs_d was furthermore applied for the detection of melamine (MEL) at very low concentrations. Raman-active peaks of MEL (10⁻³ to 10⁻¹² M) in water or milk solution upon Au_NRs_d or Ag NPs/Au_NRs_d were well distinguished. The peaks at 680 and 702 cm⁻¹ for MEL molecules were found suitable to be used as the index for sensing low-concentration MEL in a varied solution, while that at 1051 cm⁻¹ was practical to interpret MEL molecules in water or milk solution bonded with Au (i.e., Au_NRs_d) or Ag (i.e., Ag NPs/Au_NRs_d) surface. At the interface of Ag NPs/Au_NRs_d and MEL molecules in milk solution, a laser-induced electromagnetic field or hotspot effect was produced and competent to sense low-concentration MEL molecules interacting with Ag and Au surfaces. Accordingly, Ag NPs/Au_NRs_d is very promising to be used as a fast and sensitive tool for screening MEL in complex matrices such as adulteration in e.g., food and pharmaceutical products.     

Green synthesis of Au nanoparticles immobilized on halloysite nanotubes for surface-enhanced Raman scattering substrates

A facile and green route was introduced to synthesize Au nanoparticles immobilized on halloysite nanotubes (AuNPs/HNTs) used for surface-enhanced Raman scattering substrates. The naturally occurring HNTs were firstly functionalized with a large amount of -NH(2) groups by N-(β-aminoethyl)-γ-aminopropyl trimethoxysilane (AEAPTES), which possesses one lone electron pair and will "anchor" Au ions to form a chelate complex. Then, with the addition of tea polyphenols (TP), the Au ions were reduced on the surface of the previously formed Au-NH(2) chelate complex to form AuNPs. Transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE-SEM) observations indicate that a large amount of AuNPs were synthesized on HNTs. The AuNPs are irregularly spherical and densely dispersed on HNTs and the diameter of the nanoparticles varies from 20 to 40 nm. The interactions between AuNPs and -NH(2) groups were verified by X-ray photoelectron spectroscopy (XPS) and the results showed that the functional groups can "anchor" AuNPs through the chelating effect. The as-prepared AuNPs/HNTs nanomaterials with several nanometers gaps among nanoparticles were used as a unique surface-enhanced Raman scattering substrate, which possessed strong and distinctive Raman signals for R6G, indicating the remarkable enhancement effect of the AuNPs/HNTs.     

Highly reproducible surface-enhanced Raman scattering-active Au nanostructures prepared by simple electrodeposition: Origin of surface-enhanced Raman scattering activity and applications as electrochemical substrates

The fabrication of effective surface-enhanced Raman scattering (SERS) substrates has been the subject of intensive research because of their useful applications. In this paper, dendritic gold (Au) rod (DAR) structures prepared by simple one-step electrodeposition in a short time were examined as an effective SERS-active substrate. The SERS activity of the DAR surfaces was compared to that of other nanostructured Au surfaces with different morphologies, and its dependence on the structural variation of DAR structures was examined. These comparisonal investigations revealed that highly faceted sharp edge sites present on the DAR surfaces play a critical role in inducing a high SERS activity. The SERS enhancement factor was estimated to be greater than 10⁵, and the detection limit of rhodamine 6G at DAR surfaces was 10⁻⁸ M. The DAR surfaces exhibit excellent spot-to-spot and substrate-to-substrate SERS enhancement reproducibility, and their long-term stability is very good. It was also demonstrated that the DAR surfaces can be effectively utilized in electrochemical SERS systems, wherein a reversible SERS behavior was obtained during the cycling to cathodic potential regions. Considering the straightforward preparation of DAR substrates and the clean nature of SERS-active Au surfaces prepared in the absence of additives, we expect that DAR surfaces can be used as cost-effective SERS substrates in analytical and electrochemical applications.     

A colorimetric and surface-enhanced Raman scattering dual-signal sensor for Hg based on Bismuthiol II-capped gold nanoparticles

The addition of Bismuthiol II to the gold nanoparticles (AuNPs) solution led to the aggregation of AuNPs with a color change from red to blue. As a result, hot spots were formed and strong surface-enhanced Raman scattering (SERS) signal of Bismuthiol II was observed. However, the Bismuthiol II-induced aggregation of AuNPs could be reversed by Hg²⁺ in the system, accompanied by a remarkable color change from blue to red. As evidenced by UV–vis and SERS spectroscopy, the variation in absorption band and SERS intensity was strongly dependent on the concentration of Hg²⁺, suggesting a colorimetric and SERS dual-signal sensor for Hg²⁺. The sensor had a high sensitivity, low detection limits of 2 nM and 30 nM could be achieved by UV–vis spectroscopy and by SERS spectroscopy, respectively. Other environmentally relevant metal ions did not interfere with the detection of Hg²⁺. The method was successfully applied to detect Hg²⁺ in water samples. It was simple, rapid and cost-effective without any modifying or labeling procedure.