二维氧化钛纳米页

单层氧化钛纳米页(titania nanosheets)是一种厚度仅为0.7 nm的新型二维纳米材料,具有许多不同于块体氧化钛的优异性质,如:高各向异性、单晶性质、胶体和聚电解质特性、大比表面积、高表面能和量子尺寸效应等。在光电转换、磁光效应、高介电常数器件、电化学能量储存、湿敏传感器、自清洁和光催化等领域极具应用前景。本文首先总结了氧化钛纳米页的基本性能,如:光吸收性能、光致发光性能、光电化学性能、光诱导亲水性能和晶相转变温度差异等,概述了氧化钛纳米页的制备及组装方法,接着分别以薄膜片、纳米管、中空微球、超薄多层复合薄膜为代表,介绍了氧化钛纳米页组装得到的新型材料及其特点,然后介绍了氧化钛纳米页的掺杂改性,从拓宽光吸收带边、提高电子迁移速率和提高磁光效应三个角度,归纳总结了离子掺杂与氧化钛纳米页性能之间的关系,最后对氧化钛纳米页未来的研究发展趋势提出了展望。     

Titanium dioxide nanomaterials in electrocatalysis for energy

Over the last two decades, researchers have found many strategies to obtain high surface area nanostructured titanium dioxide. These nanostructures have recently found application as supports for the fabrication of electrodes for electrochemical energy conversion and storage devices. The properties that make titanium dioxide appealing for these applications are as follows: (i) stability in a variety of conditions relevant to electrocatalysis, (ii) electronic conductivity, (iii) synergistic effects with metal catalysts. The work splits TiO₂ nanomaterials into the following two classes: (i) powders and (ii) embedded nanoarchitectures (e.g. titania nanotubes on titanium support). We give an overview of the latest applications, with a special emphasis on fuel cells, electrolysis, and carbon dioxide electroreduction. We conclude with a list of the research needs that, in the opinion of the authors, will support the exploration and consolidation of the use of titania in electrocatalysis for energy.     

二氧化锰与二维材料复合应用于超级电容器

现如今世界正面临着与能源相关的一系列问题与挑战,科学家们致力于研究绿色高性能的能量存储器件以适应当前乃至以后长久可持续创新发展的需要。超级电容器作为一种新型的绿色能源储存装置,具有功率密度大、理论比电容高、充放电速度快、循环寿命长、安全性高、环境友好且经济等优点,为人类解决能源危机提出了可能。电极材料是影响超级电容器性能的重要因素。近些年,由于二氧化锰基超级电容器具有理论比电容高、化学稳定性好、环境友好等特点被广泛研究。同时多种二维材料也继石墨烯后被相继用作超级电容器电极材料,具有二维结构特征材料在提高双电层电容器的能量密度、改善赝电容电容器方面发挥着重要作用。实现高比电容和高倍率性能,将二氧化锰与二维材料复合将不失为一个有前景的选择。本文系统介绍了以石墨烯为代表的各类二维材料与二氧化锰复合物在超级电容器中的应用研究,并聚焦于这些二维材料与二氧化锰复合后所展现的优异电化学性能。     

碳材料在电化学储能中的应用

电化学储能材料是电化学储能器件发展及性能提高的关键之一. 碳材料在各种电化学储能体系中都起到了极为重要的作用,特别是近期出现的各类新型碳材料为电化学储能的发展带来了新动力,并展现了广阔的应用前景. 本文综述了碳材料,特别是以碳纳米管和石墨烯为代表的纳米碳材料,在典型电化学储能器件（锂离子/钠离子电池、超级电容器和锂硫电池等）、柔性电化学储能和电化学催化等领域的研究进展,并对碳材料在这些领域的应用前景进行了展望.     

Seeded growth of titania colloids with refractive index tunability and fluorophore-free luminescence

Titania is an important material in modern materials science, chemistry, and physics because of its special catalytic, electric, and optical properties. Here, we describe a novel method to synthesize colloidal particles with a crystalline titania, anatase core and an amorphous titania-shell structure. We demonstrate seeded growth of titania onto titania particles with accurate particle size tunability. The monodispersity is improved to such an extent so that colloidal crystallization of the grown microspheres becomes feasible. Furthermore, seeded growth provides separate manipulation of the core and shell. We tuned the refractive index of the amorphous shell between 1.55 and 2.3. In addition, the particles show luminescence when trace amounts of aminopropyl-triethoxysilane are incorporated into the titania matrix and are calcined at 450 °C. Our novel colloids may be useful for optical materials and technologies such as photonic crystals and optical trapping.     

石墨炔纳米材料的制备及在电化学能源中的应用

石墨炔纳米材料的制备与应用是石墨炔材料研究的重要方向, 通过对其纳米结构进行设计与优化, 可以提高石墨炔材料及其杂化结构的性能, 拓展其在能源储存与转换领域的应用. 本综述介绍了不同形貌和结构的石墨炔基纳米材料, 如纳米墙、 纳米片、 纳米薄膜等结构. 阐述了不同结构特征的石墨炔基纳米材料在电化学储能器件以及电化学能源催化中的应用, 同时也探讨了石墨炔不同纳米形貌和结构在能源应用领域快速发展的机遇及所面临的挑战.     

Trialkoxysilane‐capped acrylic resin/titania organic–inorganic hybrid optical films prepared by the sol–gel process

Homogeneous organic–inorganic hybrid materials with excellent thermal and optical performance were successfully prepared via the mixing of (3‐methacryloxypropyl)trimethoxysilane‐capped acrylic resin with titania synthesized by sol–gel approaches. The effects of the titania content, amount of water, and pH in the sol–gel and the ratio of the solvents (butyl acetate and ethanol) on the structures and properties of the hybrid materials were studied. More titania, more water, and base catalysis in the sol–gel process and a higher ratio of butyl acetate to ethanol for the hybrids led to a larger size and a more compact structure of the titania phase. Increasing the titania content dramatically improved the glass‐transition temperature, UV‐shielding properties, and refractive index for the hybrid materials, and it did not reduce their optical transparency. In general, better thermal stability and optical properties were achieved for the hybrid materials prepared with less water, lower pH values (e.g., acidic or neutral conditions), and a lower ratio of butyl acetate to ethanol. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 637–649, 2005     

Graphdiyne:A Versatile Material in Electrochemical Energy Conversion and Storage

Graphdiyne(GDY),which is composed of sp2-/sp-hybridized carbon atoms,has attracted increasing attention.In the structure of GDY,the existence of large triangular-like pores,well dispersed electron-rich cavities as well as a large π-conjugated structure endows GDY with a natural bandgap,fast electron/ion transport,and tunable electronic properties.These unique features make GDY competitive in areas of gas separation and capture,electronics,detectors,catalysts,biomedicine and therapy,and energy-related fields.Benefiting from the facile synthesis method,various GDY structures and GDY-based composites have been successfully prepared and show great potential in the practical application of energy storage and catalysis areas.Here,this review aims at providing a timely and comprehensive update on the preparation and application of GDY materials.The current development of GDY materials in various electrochemical fields especially in energy conversion,energy storage,and catalysis is mainly summarized.Moreover,the potential development prospects are also discussed.     

Design of oxide nanoparticles by aqueous chemistry

The elaboration of nanoparticles designed for technological applications in various fields such as catalysis, optics, magnetism, electronics… needs the strict control of their characteristics, especially chemical composition, crystalline structure, size, and shape. These characteristics bring the physical properties (color, magnetism, band gap…) of the material, and also the surface to volume ratio of particles which is of high importance when they are used as a chemically active or reactive support, in catalysis for instance. The nanoparticles may have also to be surface functionalized by various species, and/or dispersed in aqueous or non aqueous media. We will show that the aqueous chemistry of metal cations is a very versatile and attractive way for the design of oxide nanomaterials, allowing the control of size, shape, and crystalline structure for polymorphic materials. Aqueous surface chemistry, including adsorption of various species, may be used to modify the morphology of nanoparticles. In some cases, redox processes can be involved to control the morphology of nanoparticles. Technologically important nanomaterials such as titania, alumina, and iron oxides are studied.     

Preparation,characterization and application of polyaniline/epoxide polysiloxane composite films

Composites of polyaniline(PAn) and epoxide polysiloxane(EPSi) are reported for the first time. EPSi is designed, synthesized and N-grafted onto the PAn backbone through covalent bonds. As-prepared EPSi-g-PAn composites are soluble in organic solvents and the corresponding films can be easily produced via a simple solution-casting procedure. The composite films combine the mechanical characteristics of EPSi and the chemical properties of PAn, enabling the facile introduction of the noble metal particles. The successful fabrication of the composites is confirmed by the investigation of the molecular structure, crystalline structure and microstructure of the materials. The resulting composite films containing noble metal particles are employed as the catalysts for the hydrogenation of phenol to produce cyclohexanone, which exhibit the convenience and recyclability for usage as well as the high catalytic activities, including the conversion ratio of 97%-100% and the selectivity as high as 84%-98%. The present work not only provides a new method to improve the processability of the conducting polymers but also describes a kind of composite materials that may display outstanding preformances in industrial catalysis.     

Catalytic micropumps: microscopic convective fluid flow and pattern formation

As innovations continue to be made in the fields of microfluidics and the colloidal assembly, new strategies for moving particles and fluids may be needed. Heterogeneous catalysis provides means of locally converting the stored chemical energy of fuels to mechanical energy. We report an ambient temperature stationary "pump" that generates a proton concentration gradient through the bipolar electrochemical decomposition of hydrogen peroxide on patterned silver-gold surfaces. The resulting electric field drives convective fluid flow and pattern formation of colloidal tracer particles at the microscopic level by a combination of electroosmotic and electrophoretic forces.     

The one-step preparation and electrochemical characteristics of tin dioxide nanocrystalline materials

Tin dioxide nanocrystallines were prepared by one-step synthesis method – using amphiphilic P123 as a template. The crystalline nanomaterials present the uniform nano-size 15 nm and somewhat ordered porous meso-frameworks with average pores sizes of 3.5 and 9.5 nm. Meanwhile, the nanomaterials as the anode materials in lithium ion battery deliver high reversible capacity 792 mAh g⁻¹ in the first cycle, which is equal to the theoretical capacity. No aggregation of nano-tin particles was observed and the cracking of structure by the large volume change is efficiently limited owing to the porous mesostructured nanomaterials in the charge/discharge processes. The improved electrochemical properties are attributed to the particle size and structure of materials.     

Optimization of preparing LiFePO<Subscript>4</Subscript> for lithium-ion batteries via carbothermal reduction route

Lithium iron phosphate olivines (LiFePO₄) have been considered as very promising cathode for lithium-ion batteries due to their energy storage capacity combined with electrochemical and thermal stability. A key issue in synthesizing this materials is to optimize the synthetic conditions for obtain materials with excellent electrochemical properties. Here, we report full studies that investigate the synthesis of the LiFePO₄ by promising carbothermal reduction methods to prepare LiFePO₄ coated with pyrolytic carbon. Variation of the synthesis parameters showed that the materials synthesized at 700°C for 12 h have appropriate particles size and electronically conductive carbon. This makes it have better performances than others prepared at different temperature.     

共价有机框架材料在光催化领域中的应用

共价有机框架(COFs)材料是有机构筑基元通过共价键连接而形成的晶态有机多孔材料. COFs具有孔道结构规整、及比表面积高等特点,被广泛地应用于气体储存与分离、催化、传感、储能及光电转化等领域.将具有可调吸光能力的有机构筑基元引入到COFs中,可使其展现出强大的光催化潜力.近年来, COFs在光催化领域中发展迅猛.本文总结了COFs在光催化产氢、光催化二氧化碳还原、光催化有机反应以及光催化污染物降解等方面的研究进展,并展望了其在光催化领域的应用前景.     

Synthesis and photoluminescence of titania nanoparticle arrays templated by block-copolymer thin films.

High-density arrays of titania nanoparticles were prepared using a polystyrene-b-poly(ethylene oxide) block copolymer (PS-b-PEO) as a template and a titanium tetraisopropoxide based sol-gel precursor as titania source via a spin-coating method. The hydrophilic titania sol-gel precursor was selectively incorporated into hydrophilic PEO domains of PS-b-PEO and form titania nanoparticle arrays, due to a microphase separation between the PS block and the sol-gel/PEO phase. Field emission scanning electron microscopy (FESEM) and scanning probe microscopy (SPM) images showed that the uniformity and long-range order of the titania/PEO domains improved with increasing sol-gel precursor amount. Grazing incidence small-angle X-ray scattering (GISAXS) results indicate that the ordered structures exist over large length scales. Titania nanocrystal arrays of anatase modification were obtained by calcination at 600 degrees C for 4 h. After calcination, separated particles were observed for low and medium amounts of sol-gel precursors. Films with higher precursor amounts showed wormlike structures due to the aggregation between neighboring particles. Removal of the polymer matrix via UV treatment leads to highly ordered arrays of amorphous titania while retaining the domain size and interparticle distance initially present in the hybrid films. Photoluminescence (PL) properties were investigated for samples before and after calcination. The PL intensity increases with the increasing amount of sol-gel precursor. Bands at 412 nm were ascribed to self-trapped exitons and bands at 461 and 502 nm to oxygen vacancies, respectively. Uncalcined or UV-treated samples also showed PL properties similar to calcined samples, indicating that the local environment of the titanium atoms is similar to the environment of the crystalline anatase modification.     

Low-temperature synthesis and microstructural control of titania nano-particles

Nanocrystalline titania powders were synthesized at low temperature (⩽100°C) by a sol–gel method that achieved fine control of particle size and polymorph fraction. X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV–Vis spectroscopy were used to characterize the phase assemblages, crystal size and band gap of the powders. It was demonstrated that larger, well-ordered titania crystals can be obtained by increasing aging temperature and time. These processing parameters can be adjusted to select specific polymorphs from the gel precursors with particular size and shape. The quantum size effect was observed in the size-controlled nanocrystalline titania particles, leading to a blue shift in UV absorption with decreasing in particle size. The anatase to rutile transformation, which may proceed with brookite as a transition phase, is dependent on both particle size and surface structure of the nascent crystals.     

Polydopamine-based nanoreactors: synthesis and applications in bioscience and energy materials

Polydopamine (PDA)-based nanoreactors have shown exceptional promise as multifunctional materials due to their nanoscale dimensions and sub-microliter volumes for reactions of different systems. Biocompatibility, abundance of active sites, and excellent photothermal conversion have facilitated their extensive use in bioscience and energy storage/conversion. This minireview summarizes recent advances in PDA-based nanoreactors, as applied to the abovementioned fields. We first highlight the design and synthesis of functional PDA-based nanoreactors with structural and compositional diversity. Special emphasis in bioscience has been given to drug/protein delivery, photothermal therapy, and antibacterial properties, while for energy-related applications, the focus is on electrochemical energy storage, catalysis, and solar energy harvesting. In addition, perspectives on pressing challenges and future research opportunities regarding PDA-based nanoreactors are discussed.

The structural and compositional diversity of PDA-based nanoreactors has triggered fast development of their applications in bioscience and energy fields.     

The Development of Vanadyl Phosphate Cathode Materials for Energy Storage Systems: A Review

Various cathode materials have been proposed for high-performance rechargeable batteries. Vanadyl phosphate is an important member of the polyanion cathode family. VOPO₄ has seven known crystal polymorphs with tunneled or layered frameworks, which allow facile cation (de)intercalations. Two-electron transfer per formula unit can be realized by using V^V/V^IV and V^IV/V^III redox couples. The electrochemical performance is closely related to the structures of VOPO₄ and the types of inserted cations. This Review outlines the crystal structures of VOPO₄ polymorphs and their lithiated phases. The research progress of vanadyl phosphate cathode materials for different energy storage systems, including lithium-ion batteries, sodium-ion batteries, potassium-ion batteries, multivalent batteries, and supercapacitors, as well as the related mechanism investigations are summarized. It is hoped that this Review will help with future directions of using vanadyl phosphate materials for energy storage.     

Recent Advances in Porous Carbon Materials for Electrochemical Energy Storage

Climate change and the energy crisis have promoted the rapid development of electrochemical energy‐storage devices. Owing to many intriguing physicochemical properties, such as excellent chemical stability, high electronic conductivity, and a large specific surface area, porous carbon materials have always been considering as a promising candidate for electrochemical energy storage. To date, a wide variety of porous carbon materials based upon molecular design, pore control, and compositional tailoring have been proposed for energy‐storage applications. This focus review summarizes recent advances in the synthesis of various porous carbon materials from the view of energy storage, particularly in the past three years. Their applications in representative electrochemical energy‐storage devices, such as lithium‐ion batteries, supercapacitors, and lithium‐ion hybrid capacitors, are discussed in this review, with a look forward to offer some inspiration and guidelines for the exploitation of advanced carbon‐based energy‐storage materials.     

Flame spray pyrolysis for the one-step fabrication of transition metal oxide films: Recent progress in electrochemical and photoelectrochemical water splitting

Developing large scale deposition techniques to fabricate thin porous films with suitable opto-electro nic properties for water catalysis is a necessity to mitigate climate change and have a sustainable environment.In this review,flame spray pyrolysis(FSP)technique,a rapid and scalable methodology to synthesize nanostructured transitional metal oxide films with designed functionalities,is firstly introduced.Furthermore,applications in electrochemical(EC)and photoelectrochemical(PEC)water splitting for the production of hydrogen fuel is also presented.The high combustion temperature and the aggregation of flame aerosol ensure that the FSP-made films possess high crystallinity,tunable porosity and high surface areas,making this method suitable either as catalysts for EC water splitting or as efficient semiconductor materials for PEC water splitting.Finally,a perspective on the next generation FSP engineered films with potential applications in energy storage and conversion is described.