Structural diversity in solvated lithium aryloxides. Syntheses, characterization, and structures of [Li(OAr)(THF)x]n and [Li(OAr)(py)x]2 complexes where OAr = OC6H5, OC6H4(2-Me), OC6H3(2,6-(Me))2, OC6H4(2-Pr(i)), OC6H3(2,6-Pr(i)))2, OC6h4(2-Bu(t)), OC6H3(2,6-Bu(t)))2

A series of sterically varied aryl alcohols H-OAr [OAr = OC6H5 (OPh), OC6H4(2-Me) (oMP), OC6H3(2,6-(Me))2 (DMP), OC6H4(2-Pr(i)) (oPP), OC6H3(2,6-(Pr(i)))2 (DIP), OC6H4(2-Bu(t)) (oBP), OC6H3(2,6-(Bu(t)))2 (DBP); Me = CH3, Pr(i) = CHMe2, and Bu(t) = CMe3] were reacted with LiN(SiMe3)2 in a Lewis basic solvent [tetrahydrofuran (THF) or pyridine (py)] to generate the appropriate "Li(OAr)(solv)x". In the presence of THF, the OPh derivative was previously identified as the hexagonal prismatic complex [Li(OPh)(THF)]6; however, the structure isolated from the above route proved to be the tetranuclear species [Li(OPh)(THF)]4 (1). The other "Li(OAr)(THF)x" products isolated were characterized by single-crystal X-ray diffraction as [Li(OAr)(THF)]4 [OAr = oMP (2), DMP (3), oPP (4)], [Li(DIP)(THF)]3 (5), [Li(oBP)(THF)2]2, (6), and [Li(DBP)(THF)]2, (7). The tetranuclear species (1-4) consist of symmetric cubes of alternating tetrahedral Li and pyramidal O atoms, with terminal THF solvent molecules bound to each metal center. The trinuclear species 5 consists of a six-membered ring of alternating trigonal planar Li and bridging O atoms, with one THF solvent molecule bound to each metal center. Compound 6 possesses two Li atoms that adopt tetrahedral geometries involving two bridging oBP and two terminal THF ligands. The structure of 7 was identical to the previously reported [Li(DBP)(THF)]2 species, but different unit cell parameters were observed. Compound 7 varies from 6 in that only one solvent molecule is bound to each Li metal center of 7 because of the steric bulk of the DBP ligand. In contrast to the structurally diverse THF adducts, when py was used as the solvent, the appropriate "Li(OAr)(py)x" complexes were isolated as [Li(OAr)(py)2]2 (OAr = OPh (8), oMP (9), DMP (10), oPP (11), DIP (12), oBP (13)) and [Li(DBP)(py)]2 (14). Compounds 8-13 adopt a dinuclear, edge-shared tetrahedral complex. For 14, because of the steric crowding of the DBP ligand, only one py is coordinated, yielding a dinuclear fused trigonal planar arrangement. Two additional structure types were also characterized for the DIP ligand: [Li(DIP)(H-DIP)(py)]2 (12b) and [Li2(DIP)2(py)3] (12c). Multinuclear (6,7Li and 13C) solid-state MAS NMR spectroscopic studies indicate that the bulk powder possesses several Li environments for "transitional ligands" of the THF complexes; however, the py adducts possess only one Li environment, which is consistent with the solid-state structures. Solution NMR studies indicate that "transitional" compounds of the THF precursors display multiple species in solution whereas the py adducts display only one lithium environment.     

Synthesis, characterization, and electrochemical properties of a series of sterically varied iron(II) alkoxide precursors and their resultant nanoparticles

A new family of iron(II) aryloxide [Fe(OAr)(2)(py)(x)] precursors was synthesized from the alcoholysis of iron(II) mesityl [Fe(Mes)(2)] in pyridine (py) using a series of sterically varied 2-alkyl phenols (alkyl = methyl (H-oMP), isopropyl (H-oPP), tert-butyl (H-oBP)) and 2,6-dialkyl phenols (alkyl = methyl (H-DMP), isopropyl (H-DIP), tert-butyl (H-DBP), phenyl (H-DPhP)). All of the products were found to be mononuclear and structurally characterized as [Fe(OAr)(2)(py)(x)] (x = 3 OAr = oMP (1), oPP (2), oBP (3), DMP (4), DIP (5); x = 2 OAr = DBP (6), DPhP (7)). The use of tris-tert-butoxysilanol (OSi(OBu(t))(3) = TOBS) led to isolation of [Fe(TOBS)(2)(py)(2)] (8). The new Fe(OAr)(2)(py)(x) (1-6) were found, under solvothermal conditions, to produce nanodots identified by PXRD as the γ-maghemite phase. The model precursor 3 and the nanoparticles 6n were evaluated using electrochemical methods. Cyclic voltammetry for 3 revealed multiple irreversible oxidation peaks, which have been tentatively attributed to the loss of alkoxide ligand coupled with the deposition of a solid Fe-containing coating on the electrode. This coating was stable out to the voltage limits for the acetonitrile solvent.     

Synthesis with structural and electronic characterization of homoleptic Fe(II)- and Fe(III)-fluorinated phenolate complexes

Four Fe(III) compounds and one Fe(II) compound containing mononuclear, homoleptic, fluorinated phenolate anions of the form [Fe(OAr)(m)](n-) have been prepared in which Ar(F) = C(6)F(5) and Ar' = 3,5-C(6)(CF(3))(2)H(3): (Ph(4)P)(2)[Fe(OAr(F))(5)], 1, (Me(4)N)(2)[Fe(OAr(F))(5)], 2, {K(18-crown-6)}(2)[Fe(OAr(F))(5)], 3a, {K(18-crown-6)}(2)[Fe(OAr')(5)], 3b, and {K(18-crown-6)}(2)[Fe(OAr(F))(4)], 6. Two dinuclear Fe(III) compounds have also been prepared: {K(18-crown-6)}(2)[(OAr(F))(3)Fe(μ(2)-O)Fe(OAr(F))(3)], 4, and {K(18-crown-6)}(2)[(OAr(F))(3)Fe(μ(2)-OAr(F))(2)Fe(OAr(F))(3)], 5. These compounds have been characterized with UV-vis spectroscopy, elemental analysis, Evans method susceptibility, and X-ray crystallography. All-electron, geometry-optimized DFT calculations on four [Ti(IV)(OAr)(4)] and four [Fe(III)(OAr)(4)](-) species (Ar = 2,3,5,6-C(6)Me(4)H, C(6)H(5), 2,4,6-C(6)Cl(3)H(2), C(6)F(5)) with GGA-BP and hybrid B3LYP basis sets demonstrated that, under D(2d) symmetry, π donation from the O 2p orbitals is primarily into the d(xy) and d(z(2)) orbitals. The degree of donation is qualitatively consistent with expectations based on ligand Br?nsted basicity and supports the contention that fluorinated phenolate ligands facilitate isolation of nonbridged homoleptic complexes due to their reduced π basicity at oxygen.     

Structural diversity in a series of alkyl-substituted cesium aryloxides

A family of cesium aryloxides [Cs(OAr)](n) were synthesized and structurally characterized from the reaction of 1:1 or 1:excess stoichiometry of Cs(0) and the appropriate alkyl-substituted phenol: 2-alkylphenol [alkyl = methyl (H-oMP), isopropyl (H-oPP), and tert-butyl (H-oBP)] and 2,6-dialkylphenol [alkyl = methyl (H-DMP), isopropyl (H-DIP), tert-butyl (H-DBP), and phenyl (H-DPhP)]. The products were structurally identified as [Cs(oMP)(H-oMP)(2)](n) (1), [Cs(5)(oPP)(5)](n) (2), [Cs(4)(oBP)(4)(H-oBP)(6)](n) (3x, shown), [Cs(3)(DMP)(3)](n) (4), [Cs(2)(DIP)(2)](n) (5), [Cs(DIP)(H-DIP)](n) (5x), and [Cs(DPhP)](n) (7). Compounds 1-7 were found to adopt complex polymeric structures employing π interactions from the neighboring pendant phenoxide ligands. The solution behavior of these compounds was studied using solution (133)Cs NMR spectroscopy, and for each compound, a single (133)Cs NMR resonance was observed, with chemical shift values found to be strongly solvent-dependent. This implies that monomeric cesium salt species involving solvent interactions exist in solution.     

Synthetic and mechanistic aspects of the immortal ring-opening polymerization of lactide and trimethylene carbonate with new homo- and heteroleptic tin(II)-phenolate catalysts

Several new heteroleptic Sn(II) complexes supported by amino-ether phenolate ligands [Sn{LO(n)}(Nu)] (LO(1)=2-[(1,4,7,10-tetraoxa-13-azacyclopentadecan-13-yl)methyl]-4,6-di-tert-butylphenolate, Nu=NMe(2) (1), N(SiMe(3))(2) (3), OSiPh(3) (6); LO(2)=2,4-di-tert-butyl-6-(morpholinomethyl)phenolate, Nu=N(SiMe(3))(2) (7), OSiPh(3) (8)) and the homoleptic Sn{LO(1)}(2) (2) have been synthesized. The alkoxy derivatives [Sn{LO(1)}(OR)] (OR=OiPr (4), (S)-OCH(CH(3))CO(2)iPr (5)), which were generated by alcoholysis of the parent amido precursor, were stable in solution but could not be isolated. [Sn{LO(1)}](+)[H(2)N{B(C(6)F(5))(3)}(2)](-) (9), a rare well-defined, solvent-free tin cation, was prepared in high yield. The X-ray crystal structures of compounds 3, 6, and 8 were elucidated, and compounds 3, 6, 8, and 9 were further characterized by (119)Sn M?ssbauer spectroscopy. In the presence of iPrOH, compounds 1-5, 7, and 9 catalyzed the well-controlled, immortal ring-opening polymerization (iROP) of L-lactide (L-LA) with high activities (ca. 150-550 mol(L-LA) mol(Sn)(-1) h(-1)) for tin(II) complexes. The cationic compound 9 required a higher temperature (100 °C) than the neutral species (60 °C); monodisperse poly(L-LA)s were obtained in all cases. The activities of the heteroleptic pre-catalysts 1, 3, and 7 were virtually independent of the nature of the ancillary ligand, and, most strikingly, the homoleptic complex 2 was equally competent as a pre-catalyst. Polymerization of trimethylene carbonate (TMC) occurs much more slowly, and not at all in the presence of LA; therefore, the generation of PLA-PTMC copolymers is only possible if TMC is polymerized first. Mechanistic studies based on (1)H and (119)Sn{(1)H} NMR spectroscopy showed that the addition of an excess of iPrOH to compound 3 yielded a mixture of compound 4, compound [Sn(OiPr)(2)](n) 10, and free {LO(1)}H in a dynamic temperature-dependent and concentration-dependent equilibrium. Upon further addition of L-LA, two active species were detected, [Sn{LO(1)}(OPLLA)] (12) and [Sn(OPLLA)(2)] (14), which were also in fast equilibrium. Based on assignment of the (119)Sn{(1)H} NMR spectrum, all of the species present in the ROP reaction were identified; starting from either the heteroleptic (1, 3, 7) or homoleptic (2) pre-catalysts, both types of pre-catalysts yielded the same active species. The catalytic inactivity of the siloxy derivative 6 confirmed that ROP catalysts of the type 1-5 could not operate according to an activated-monomer mechanism. These mechanistic studies removed a number of ambiguities regarding the mechanism of the (i)ROPs of L-LA and TMC promoted by industrially relevant homoleptic or heteroleptic Sn(II) species.     

Reactions of in situ generated hydrated organotin cations with chelating O,O- or O,N-ligands: a possible structure-directing influence of the organic substituent on tin

The reaction of [n-Bu(2)SnO](n) with 1,5-naphthalenedisulfonic acid tetrahydrate in a 1:1 stoichiometry followed by reaction with 2,2'-bipyridine-N,N'-dioxide (BPDO-I) afforded a 1D-coordination polymer [n-Bu(2)Sn(BPDO-I)(1,5-C(10)H(6)(SO(3))(2))](n) (1) where the disulfonate ligand acts as a bridging ligand between two tin centers. An analogous reaction involving [Ph(2)SnO](n) afforded a trihydrated O,O'-chelated diorganotin cation [{Ph(2)Sn(BPDO-I)(H(2)O)(3)}(2+)][C(10)H(6)(SO(3)(-))(2)]·2CH(3)OH (2·2CH(3)OH). Utilizing two equivalents of BPDO-I in this reaction resulted in the ionic complex [{Ph(2)Sn(BPDO-I)(2)(H(2)O)}(2+)][C(10)H(6)(SO(3)(-))(2)]·3H(2)O (3·3H(2)O). In 2 and 3 the sulfonate ligands are not present in the coordination sphere of tin. Reaction of [n-Bu(2)SnO](n) and 1,5-naphthalenedisulfonic acid tetrahydrate, followed by reaction with [bis(diphenylphosphoryl)methane (DPPOM)] resulted in the formation of, [{n-Bu(2)Sn(DPPOM)(2)(H(2)O)(1,5-C(10)H(6)(SO(3))(SO(3)(-))}]·H(2)O (4·H(2)O). Of the two coordinating groups present in DPPOM, only one P=O group is coordinated to the tin atom. The remaining P=O motif is free and is involved in intramolecular H-bonding with the tin-bound water molecule. Using [Ph(2)SnO](n) instead of [n-Bu(2)SnO](n) afforded the ionic complex [{Ph(2)Sn(DPPOM)(2)}(2+){1,5-C(10)H(6)(SO(3)(-))(2)}] (5) where the DPPOM functions as a chelating ligand. The reaction of [n-Bu(2)SnO](n) with 1,5-naphthalenedisulfonic acid tetrahydrate followed by addition of one equivalent of 8-hydroxyquinoline (8-HQ) in presence of triethylamine afforded the neutral dinuclear complex, [(H(2)O)(8-Q)n-Bu(2)Sn(μ-1,5-C(10)H(6)(SO(3))(2))n-Bu(2)Sn(8-Q)(H(2)O)] (6) where the two tin atoms are bridged by the disulfonate ligand. Compounds 1-6 are thermally stable as shown by their thermogravimetric analyses.     

High-valent uranium alkyls: evidence for the formation of U(VI)(CH2SiMe3)6

Oxidation of [Li(DME)(3)][U(CH(2)SiMe(3))(5)] with 0.5 equiv of I(2), followed by immediate addition of LiCH(2)SiMe(3), affords the high-valent homoleptic U(V) alkyl complex [Li(THF)(4)][U(CH(2)SiMe(3))(6)] (1) in 82% yield. In the solid-state, 1 adopts an octahedral geometry as shown by X-ray crystallographic analysis. Addition of 2 equiv of tert-butanol to [Li(DME)(3)][U(CH(2)SiMe(3))(5)] generates the heteroleptic U(IV) complex [Li(DME)(3)][U(O(t)Bu)(2)(CH(2)SiMe(3))(3)] (2) in high yield. Treatment of 2 with AgOTf fails to produce a U(V) derivative, but instead affords the U(IV) complex (Me(3)SiCH(2))Ag(μ-CH(2)SiMe(3))U(CH(2)SiMe(3))(O(t)Bu)(2)(DME) (3) in 64% yield. Complex 3 has been characterized by X-ray crystallography and is marked by a uranium-silver bond. In contrast, oxidation of 2 can be achieved via reaction with 0.5 equiv of Me(3)NO, producing the heteroleptic U(V) complex [Li(DME)(3)][U(O(t)Bu)(2)(CH(2)SiMe(3))(4)] (4) in moderate yield. We have also attempted the one-electron oxidation of complex 1. Thus, oxidation of 1 with U(O(t)Bu)(6) results in formation of a rare U(VI) alkyl complex, U(CH(2)SiMe(3))(6) (6), which is only stable below -25 °C. Additionally, the electronic properties of 1-4 have been assessed by SQUID magnetometry, while a DFT analysis of complexes 1 and 6 is also provided.     

Structural variations of potassium aryloxides

A series of potassium aryloxides (KOAr) were isolated from the reaction of a potassium amide (KN(SiMe(3))(2)) and the desired substituted phenoxide (oMP, 2-methyl; oPP, 2-iso-propyl; oBP, 2-tert-butyl; DMP, 2,6-di-methyl; DIP, 2,6-di-iso-propyl; DBP, 2,6-di-tert-butyl) in tetrahydrofuran (THF) or pyridine (py) as the following: [([K(mu(4)-oMP)(THF)][K(mu(3)-oMP)])(5)]( infinity ) (1), [[K(6)(eta(6),mu(3)-oMP)(4)(eta(6),mu(4)-oMP)(2)(py)(4)].[K(6)(eta(6),mu(3)-oMP)(6)(eta(6)-py)(4)]]( infinity ) (2), [K(mu(3)-oPP)](4)(THF)(3) (3), [K(4)(eta(6),mu(3)-oPP)(2)(mu(3)-oPP)(2)(py)(3)]( infinity ) (4), [K(mu(3)-oBP)(THF)](6) (5), [K(6)(eta(6),mu(3)-oBP)(2)(mu(3)-oBP)(4)(py)(4)]( infinity ) (6), [K(3)(eta(6),mu(3)-DMP)(2)(mu-DMP)(THF)]( infinity ) (7), [[K(eta(6),mu-DMP)(py)](2)]( infinity ) (8), [K(eta(6),mu-DIP)]( infinity ) (9), [K(eta(6),mu-DBP)]( infinity ) (10). Further exploration of the aryl interactions led to the investigation of the diphenylethoxide (DPE) derivative which was isolated as [K(mu(3)-DPE)(THF)](4) (11) or [K(mu(3)-DPE)(py)](4).py(2) (12) depending on the solvent used. In general, the less sterically demanding ligands (oMP, oPP, oBP, and DMP) were solvated polymeric species; however, increasing the steric bulk (DIP and DBP) led to unsolvated polymers and not discrete molecules. For most of this novel family of compounds, the K atoms were pi-bound to the aryl rings of the neighboring phenoxide derivatives to fill their coordination sites. The synthesss and characterization of these compounds are described in detail.     

Bis(phosphino)borates: a new family of monoanionic chelating phosphine ligands

The reaction of dimethyldiaryltin reagents Me(2)SnR(2) (R = Ph (1), p-MePh (2), m,m-Me(2)Ph (3), p-(t)BuPh (4), p-MeOPh (5), p-CF(3)Ph (6)) with BCl(3) provided a high-yielding, simple preparative route to the corresponding diarylchloroboranes R(2)BCl (R = Ph (10), p-MePh (11), m,m-Me(2)Ph (12), p-(t)BuPh (13), p-MeOPh (14), p-CF(3)Ph (15)). In some cases, the desired diarylchloroborane was not formed from an appropriate tin reagent Me(2)SnR(2) (R = o-MeOPh (7), o,o-(MeO)(2)Ph (8), o-CF(3)Ph (9)). The reaction of lithiated methyldiaryl- or methyldialkylphosphines with diarylchloroboranes or dialkylchloroboranes is discussed. Specifically, several new monoanionic bis(phosphino)borates are detailed: [Ph(2)B(CH(2)PPh(2))(2)] (25); [(p-MePh)(2)B(CH(2)PPh(2))(2)] (26); [(p-(t)BuPh)(2)B(CH(2)PPh(2))(2)] (27); [(p-MeOPh)(2)B(CH(2)PPh(2))(2)] (28); [(p-CF(3)Ph)(2)B(CH(2)PPh(2))(2)] (29); [Cy(2)B(CH(2)PPh(2))(2)] (30); [Ph(2)B(CH(2)P[p-(t)BuPh](2))(2)] (31); [(p-MeOPh)(2)B(CH(2)P[p-(t)BuPh](2))(2)] (32); [Ph(2)B(CH(2)P[p-CF(3)Ph](2))(2)] (33); [Ph(2)B(CH(2)P(BH(3))(Me)(2))(2)] (34); [Ph(2)B(CH(2)P(S)(Me)(2))(2)] (35); [Ph(2)B(CH(2)P(i)Pr(2))(2)] (36); [Ph(2)B(CH(2)P(t)Bu(2))(2)] (37); [(m,m-Me(2)Ph)(2)B(CH(2)P(t)Bu(2))(2)] (38). The chelation of diarylphosphine derivatives 25-33 and 36 to platinum was examined by generation of a series of platinum dimethyl complexes. The electronic effects of substituted bis(phosphino)borates on the carbonyl stretching frequency of neutral platinum alkyl carbonyl complexes were studied by infrared spectroscopy. Substituents remote from the metal center (i.e. on boron) have minimal effect on the electronic nature of the metal center, whereas substitution close to the metal center (on phosphorus) has a greater effect on the electronic nature of the metal center.     

Stannylplumbylenes: bonding between tetravalent tin and divalent lead

Depending on stoichiometry, reactions of the mixed valence Sn(0)/Sn(III) compound Sn(SnAr(3))(2) (1) (Ar = C(6)H(4)(O(i)Pr)(2)-2,6) with the likewise substituted plumbylene PbAr(2) (3) afforded either the homoleptic distannylplumbylene Pb(SnAr(3))(2) (4) or the heteroleptic arylstannylplumbylene Pb(Ar)SnAr(3) (5), a valence isomer of a stannaplumbene.     

Neutral and cationic alkylmanganese(II) complexes containing 2,6-bisiminopyridine ligands

Manganese alkyl complexes stabilised by 2,6-bis(N,N'-2,6-diisopropyl-phenyl)acetaldiminopyridine ((iPr)BIP) have been selectively prepared by reacting suitable alkylmanganese(II) precursors, such as homoleptic dialkyls [(MnR(2))(n)] or the corresponding THF adducts [{MnR(2)(thf)}(2)] with the mentioned ligand. For R=CH(2)CMe(2)Ph or CH(2)Ph, formally Mn(I) derivatives are produced, in which one of the two R groups migrates to the 4-position of the central pyridine ring in the (iPr)BIP ligand. In contrast, a true dialkyl complex [MnR(2)((iPr)BIP)] can be isolated for R=CH(2)SiMe(3). In solution, this compound slowly evolves to the corresponding Mn(I) monoalkyl derivative. A detailed study of this reaction provides insights on its mechanism, showing that it proceeds through successive alkyl migrations, followed by spontaneous dehydrogenation. Protonation of [Mn(CH(2)SiMe(3))(2)((iPr)BIP)] with the pyridinium salt [H(Py)(2)][BAr'(4)] (Ar'=3,5-C(6)H(3)(CF(3))(2)) leads to the cationic species [Mn(CH(2)SiMe(3))(Py)((iPr)BIP)](+). Alternatively, the same complex can be produced by reaction of the pyridine complex [{Mn(CH(2)SiMe(3))(2)(Py)}(2)] with the protonated ligand salt [H(iPr)BIP](+)[BAr'(4)](-). This last reaction allows the synthesis of analogous cationic alkylmanganese(II) derivatives, when precursors of type [MnR(2)((iPr)BIP)] are not available. Treatment of these neutral and cationic (iPr)BIP alkylmanganese derivatives with a range of typical co-catalysts (modified methylaluminoxane (MMAO), B(C(6)F(5))(3), trimethyl or triisobutylaluminum) does not lead to active ethylene polymerisation catalysts.     

Gallium hydride complexes stabilised by multidentate alkoxide ligands: precursors to thin films of Ga2O3 at low temperatures

The donor-functionalised alkoxides {Me(3-x)N(CH(2)CH(2)O)(x)} (L(x); x = 1, 2) have been used to form gallium hydride complexes [{GaH(2)(L(1))}(2)] and [{GaH(L(2))}(2)] that are stable and isolable at room temperature. Along with a heteroleptic gallium tris(alkoxide) complex [Ga(L(1))(3)] and the dimeric complex [{GaMe(L(2))}(2)], these compounds have been used as single-source precursors for the deposition of Ga(2)O(3) by aerosol-assisted chemical vapour deposition (AACVD) with toluene as solvent. The resulting films were mostly transparent, indicating low levels of carbon contamination, and they were also mainly amorphous. However, [Ga(L(1))(3)] did contain visibly crystalline material deposited at a substrate temperature of 450?°C, by far the lowest ever observed for the CVD of gallium oxide.     

Ce(IV) complexes with donor-functionalized alkoxide ligands: improved precursors for chemical vapor deposition of CeO2

Thin films of ceria (CeO(2)) have many applications, and their synthesis by liquid-injection MOCVD (metal-organic chemical vapor deposition) or ALD (atomic layer deposition) requires volatile precursor compounds. Here we report the synthesis of a series of homoleptic and heteroleptic Ce(IV) complexes with donor-functionalized alkoxide ligands mmp (1-methoxy-2-methylpropan-2-olate), dmap (1-(dimethylamino)propan-2-olate), and dmop (2-(4,4-dimethyl-4,5-dihydrooxazol-2-yl)propan-2-olate) and their potential as precursors for MOCVD and ALD of CeO(2). New complexes were synthesized by alcohol exchange reactions with [Ce(OBu(t))(4)]. [Ce(mmp)(4)] and [Ce(dmap)(4)] were both found to be excellent precursors for liquid-injection MOCVD of CeO(2), depositing high purity thin films with very low carbon contamination, and both have a large temperature window for diffusion controlled growth (350-600 °C for [Ce(mmp)(4)]; 300-600 °C for [Ce(dmap)(4)]). [Ce(mmp)(4)] is also an excellent precursor for liquid-injection ALD of CeO(2) using H(2)O as oxygen source and demonstrates self-limiting growth from 150 to 350 °C. [Ce(dmap)(4)] has lower thermal stability than [Ce(mmp)(4)] and does not show self-limiting growth in ALD. Heteroleptic complexes show a tendency to undergo ligand redistribution reactions to form mixtures in solution and are unsuitable as precursors for liquid-injection CVD.     

1,2-Distanna-closo-dodecaborate--a rare example of a 1,2-distannylene ligand in transition metal chemistry

The coordination chemistry of the novel bidentate tin ligand 1,2-distanna-closo-dodecaborate is illustrated for the first time by reactions with molybdenum, platinum and gold metal complexes. Up to three clusters coordinate two metal centers in close proximity. For all these metal complexes the typical μ-bridging coordination mode was observed exclusively. Furthermore, two cluster anions react with dichloromethane via substitution of the chloride ions. The carbon functionalized tin cluster [Et(4)N](2)[CH(2)(Sn(2)B(10)H(10))(2)] and the coordination complexes [Et(3)NMe](6)[Mo(2)(CO)(6)(Sn(2)B(10)H(10))(3)], [Et(3)NMe](2)[{HPt(PEt(3))(2)(Sn(2)B(10)H(10))}(2)], [Et(4)N](2)[{HPt(PPh(3))(2)(Sn(2)B(10)H(10))}(2)] and [{(TP)Au}(2)(Sn(2)B(10)H(10))] (TP = PhP(o-Ph(2)PC(6)H(4))(2)) are fully characterized by multinuclear NMR spectroscopy, elemental analyses and crystal structure analyses.     

Synthesis and characterization of pentachlorophenyl-metal derivatives with d0 and d10 electron configurations

By reaction of [TiCl(3)(thf)(3)] with LiC(6)Cl(5), the homoleptic organotitanium(III) derivative [Li(thf)(4)][Ti(III)(C(6)Cl(5))(4)] (1) has been prepared as a paramagnetic (d(1), S = 1/2, g(av) = 1.959(2)), extremely air-sensitive compound. Oxidation of 1 with [N(C(6)H(4)Br-4)(3)][SbCl(6)] gives the diamagnetic (d(0)) organotitanium(IV) species [Ti(IV)(C(6)Cl(5))(4)] (2). Compounds 1 and 2 are also electrochemically related (E(1/2) = 0.05 V). The homoleptic, diamagnetic (d(10)) compounds [N(PPh(3))(2)][Tl(C(6)Cl(5))(4)] (3) and [Sn(C(6)Cl(5))(4)] (4) have also been prepared. Nearly tetrahedral environments have been found for the d(0), d(10), and d(1) metal centers in the molecular structures of compounds 2-4 as well as in that of [Li(thf)(2)(OEt(2))(2)][Ti(III)(C(6)Cl(5))(4)].CH(2)Cl(2) (1') (X-ray diffraction). The reaction of the heavier Group 4 metal halides, MCl(4) (M = Zr, Hf) with LiC(6)Cl(5) in the presence of [NBu(4)]Br gives, in turn, the heteroleptic species [NBu(4)][M(C(6)Cl(5))(3)Cl(2)] (M = Zr (5), Hf (6)). Compounds 5 and 6 are isomorphous and isostructural, with the metal center in a trigonal-bipyramidal (TBPY-5) environment defined by two axial Cl ligands and three equatorial C(6)Cl(5) groups (X-ray diffraction). No redox features are observed for compounds 3-6 in CH(2)Cl(2) solution between -1.6 and +1.6 V.     

Preparation, characterization, and theoretical analysis of group 14 element(I) dimers: a case study of magnesium(I) compounds as reducing agents in inorganic synthesis

A synthetic route to the new amidine (DipNH)(DipN)C(C(6)H(4)Bu(t)-4) (ButisoH; Dip = C(6)H(3)Pr(i)(2)-2,6) has been developed. Its deprotonation with either LiBu(n) or KN(SiMe(3))(2) yields the amidinate complexes [M(Butiso)] (M = Li or K). Their reactions with group 14 element halides/pseudohalides afford the heteroleptic group 14 complexes [(Butiso)SiCl(3)], [(Butiso)ECl] (E = Ge or Sn), and [{(Butiso)Pb(μ-O(3)SCF(3))(THF)}(∞)], all of which have been crystallographically characterized. In addition, the synthesis and spectroscopic characterization of the homoleptic complex [Pb(Butiso)(2)] is reported. Reductions of the heteroleptic complexes with a soluble magnesium(I) dimer, [{((Mes)Nacnac)Mg}(2)] ((Mes)Nacnac = [(MesNCMe)(2)CH](-); Mes = mesityl), have given moderate-to-high yields of the group 14 element(I) dimers [{(Butiso)E}(2)] (E = Si, Ge, or Sn), the X-ray crystallographic studies of which reveal trans-bent structures. The corresponding lead(I) complex could not be prepared. Comprehensive spectroscopic and theoretical analyses of [{(Butiso)E}(2)] have allowed their properties to be compared. All complexes possess E-E single bonds and can be considered as intramolecularly base-stabilized examples of ditetrelynes, REER. Taken as a whole, this study highlights the synthetic utility of soluble and easy to prepare magnesium(I) dimers as valuable alternatives to the harsh, and often insoluble, alkali-metal reducing agents that are currently widely employed in the synthesis of low-oxidation-state organometallic/inorganic complexes.     

Oxidation by oxygen and sulfur of Tin(IV) derivatives containing a redox-active o-amidophenolate ligand

Oxidation of tin(IV) o-amidophenolate complexes [Sn(ap)Ph(2)] (1) and [Sn(ap)Et(2)(thf)] (2) (ap=dianion of 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone (ImQ)) with molecular oxygen and sulfur in toluene solutions was investigated. The reaction of oxygen with 1 at room temperature forms a paramagnetic derivative [Sn(isq)(2)Ph(2)] (3) (isq=radical anion of ImQ) and diphenyltin(IV) oxide [{Ph(2)SnO}(n)]. Interaction of 1 with sulfur gives another monophenyl-substituted paramagnetic tin(IV) complex, [Sn(ap)(isq)Ph] (4), and the sulfide, [Ph(3)Sn](2)S. The oxidation of 2 with oxygen and with sulfur proceeds through the derivative [Sn(isq)(2)Et(2)] (7), which undergoes alkyl elimination to give two new tin(IV) compounds, [Sn(ap)(isq)Et] (5) and [Sn(ap)(EtImQ)Et] (6) (EtImQ=2,4-di-tert-butyl-6-(2,6-diisopropylphenylimino)-3-ethylcyclohexa-1,4-dienolate ligand), respectively, along with the corresponding alkyltin(IV) oxide and sulfide. Complexes 3-5 and 7 were studied by EPR spectroscopy. The structures of 3, 4 and 6 were investigated by X-ray analysis.     

Polyamine-stabilized sodium aryloxides: simple initiators for the ring-opening polymerization of rac-lactide

Metalation of 2,4,6-tri(methyl)phenol ((Me)ArOH) and 2,6-di(tert-butyl)-4-methylphenol ((Bu)ArOH) with NaN(SiMe(3))(2) in toluene and in the presence of stoichiometric amounts of the polydentate amines N,N,N',N'-tetramethylethylenediamine (TMEDA) and N,N,N',N',N'-pentamethyldiethylenetriamine (PMDETA) affords three new sodium aryloxide complexes [Na(μ-OAr(Bu))(TMEDA)](2) (3), [Na(μ-OAr(Me))(PMDETA)](2) (4), and [Na(OAr(Bu))(PMDETA)] (5). Complexes 3 to 5 have been isolated as crystalline materials in reasonable yields and characterized in the solid state by X-ray crystallography and in solution by NMR spectroscopy. Complexes 3 to 5 and the related [tris(2-dimethylaminoethyl)amine] (Me(6)TREN) derivatives [Na(OAr(Me))(HOAr(Me))(Me(6)TREN)] (1) and [Na(OAr(Bu))(Me(6)TREN)] (2), recently prepared in our group, are shown to be active as initiators for the ring-opening polymerization (ROP) of rac-lactide with benzyl alcohol as a co-initiator. However, during the course of the polymerization reactions intrachain and stereorandom transesterification side-reactions were observed under some of the experimental conditions tested.     

Complexes of platinum(II) containing ferrocenylethynyl ligands: synthesis, characterization and spectroscopic and electrochemical properties

A series of homoleptic and heteroleptic platinum(ii) complexes [Pt(C[triple bond, length as m-dash]CFc)(2)(L-L)] (L-L = COD , 1,1'-bis(diphenylphosphino)ferrocene (dppf) ), Q(2)[cis/trans-Pt(C(6)F(5))(2)(C[triple bond, length as m-dash]CFc)(2)] (cis, Q = PMePh(3), ; trans, Q = NBu(4), ), (NBu(4))[Pt(bzq)(C[triple bond, length as m-dash]CFc)(2)] (Hbzq = 7,8-benzoquinoline) and (NBu(4))(2)[Pt(C[triple bond, length as m-dash]CFc)(4)] has been synthesized and characterized spectroscopically and the structures of .2CHCl(3), and .2H(2)O.2CH(2)Cl(2) confirmed by single-crystal X-ray studies. The anion of complex , shows strong O-Hpi(C[triple bond, length as m-dash]C) interactions and weaker C-Clpi(C[triple bond, length as m-dash]C) contacts between the protons of two water and two CH(2)Cl(2) molecules and the C(alpha)[triple bond, length as m-dash]C(beta) of mutually cis alkynyl groups. In this complex the presence of additional O-HH-C(Cp) and C-ClH-C(Cp) contacts gives rise to an extended bidimensional network. The optical and electrochemical properties of all derivatives have been examined. It is remarkable that for complexes and a facile oxidatively induced coupling, giving rise to 1,4-diferrocenylbutadiyne, is observed, this also having been proven by chemical oxidation.     

Halide, amide, cationic, manganese carbonylate, and oxide derivatives of triamidosilylamine uranium complexes

Treatment of the complex [U(Tren(TMS))(Cl)(THF)] [1, Tren(TMS) = N(CH(2)CH(2)NSiMe(3))(3)] with Me(3)SiI at room temperature afforded known crystalline [U(Tren(TMS))(I)(THF)] (2), which is reported as a new polymorph. Sublimation of 2 at 160 °C and 10(-6) mmHg afforded the solvent-free dimer complex [{U(Tren(TMS))(μ-I)}(2)] (3), which crystallizes in two polymorphic forms. During routine preparations of 1, an additional complex identified as [U(Cl)(5)(THF)][Li(THF)(4)] (4) was isolated in very low yield due to the presence of a slight excess of [U(Cl)(4)(THF)(3)] in one batch. Reaction of 1 with one equivalent of lithium dicyclohexylamide or bis(trimethylsilyl)amide gave the corresponding amide complexes [U(Tren(TMS))(NR(2))] (5, R = cyclohexyl; 6, R = trimethylsilyl), which both afforded the cationic, separated ion pair complex [U(Tren(TMS))(THF)(2)][BPh(4)] (7) following treatment of the respective amides with Et(3)NH·BPh(4). The analogous reaction of 5 with Et(3)NH·BAr(f)(4) [Ar(f) = C(6)H(3)-3,5-(CF(3))(2)] afforded, following addition of 1 to give a crystallizable compound, the cationic, separated ion pair complex [{U(Tren(TMS))(THF)}(2)(μ-Cl)][BAr(f)(4)] (8). Reaction of 7 with K[Mn(CO)(5)] or 5 or 6 with [HMn(CO)(5)] in THF afforded [U(Tren(TMS))(THF)(μ-OC)Mn(CO)(4)] (9); when these reactions were repeated in the presence of 1,2-dimethoxyethane (DME), the separated ion pair [U(Tren(TMS))(DME)][Mn(CO)(5)] (10) was isolated instead. Reaction of 5 with [HMn(CO)(5)] in toluene afforded [{U(Tren(TMS))(μ-OC)(2)Mn(CO)(3)}(2)] (11). Similarly, reaction of the cyclometalated complex [U{N(CH(2)CH(2)NSiMe(2)Bu(t))(2)(CH(2)CH(2)NSiMeBu(t)CH(2))}] with [HMn(CO)(5)] gave [{U(Tren(DMSB))(μ-OC)(2)Mn(CO)(3)}(2)] [12, Tren(DMSB) = N(CH(2)CH(2)NSiMe(2)Bu(t))(3)]. Attempts to prepare the manganocene derivative [U(Tren(TMS))MnCp(2)] from 7 and K[MnCp(2)] were unsuccessful and resulted in formation of [{U(Tren(TMS))}(2)(μ-O)] (13) and [MnCp(2)]. Complexes 3-13 have been characterized by X-ray crystallography, (1)H NMR spectroscopy, FTIR spectroscopy, Evans method magnetic moment, and CHN microanalyses.