Modeling of water vapor adsorption isotherms onto polyacrylic polymer

The adsorbed amounts of water vapor onto polyacrylic polymer (polymer ×10) were measured using a thermogravimetry method as a function of pressure at 298 and 313 K. The adsorption isotherms are categorized to type II isotherms by IUPAC classification leading to a hysteresis loop between adsorption and desorption branches. The current study was completed by the measurement of the adsorption heats at 298 K using a differential scanning calorimetry. The calorimetric curves showed two adsorption heats domains. These domains have been attributed to the adsorption of “equivalent monolayer” and the condensation of water between polymeric chains. The correlation of experimental data to some chosen theoretical models shows that the GAB model is the most adequate to describe water vapor sorption isotherms.     

Modeling Pb(II) adsorption onto sandy loam soil

The adsorption of Pb(II) onto hydrous sandy loam soil was investigated with batch equilibrium adsorption experiments. Results show that the amount of Pb(II) adsorbed increases with increasing pH and surface loading. It was demonstrated that the surface acidity of the soil could be determined using electrophoretic mobility measurements. The surface acidity constants, pK(a1)(int) and pK(a2)(int), were 1.57 and 3.43, respectively. A surface complex formation model (SCFM) was employed to describe the adsorption. The intrinsic stability constants, pK(i)(s), for the surface reaction between the Pb species and the ionized soil surface hydroxyl groups were determined from SCFM fitting. The adsorption free energy of Pb2+ and Pb(OH)+ ions ranges from -5.74 to -6.48 kcal/mol and from -9.68 to -10.00 kcal/mol, respectively, for surface loadings between 1.21 x 10(-5) and 2.41 x 10(-4) mol/g. The adsorption binding calculation indicated that the specific chemical interaction is the major mechanism responsible for the adsorption process.     

First preparation of biotinylated gradient polyethylene surface to bind photoactive caged streptavidin

A gradient polyethylene (PE) surface was created through corona treatment, in which the corona power increased along the 5 cm length of the PE. The gradient surface was treated with polyethyleneimine and then biotin. Fluorescein-conjugated streptavidin (SAV) caged within 5-carboxymethoxy-2-nitrobenzyl (CMNB) adsorbed onto the biotinylated gradient PE surface following molecular recognition principles. Photoirradiation decomposed the CMNB cage and allowed the fluorescein-conjugated SAV to fluoresce, the intensity of which increased gradually along the PE surface.     

Modeling the adsorption of dyes onto activated carbon by using experimental designs

We used experimental design methodologies to obtain the response surface of the adsorption process for three acid dyes used in the dyeing step of a tanning process. The dyes were Acid Red 97, Acid Orange 61 and Acid Brown 425. The adsorption process was evaluated determining the concentrations of individual and total dyes remaining in solution at the end of the process. These concentrations were determined simultaneously in a single step using sequential injection analysis with multivariate curve resolution alternating least squares (SIA-MCR-ALS). This method involves fractional factorial designs and the steepest ascent method to find a zone of efficient adsorption and a response surface-modeling step to fit the relevant adsorption factors for the response.     

Incorporation of biotinylated manganese-salen complexes into streptavidin: New artificial metalloenzymes for enantioselective sulfoxidation

Incorporation of achiral biotinylated manganese-salen complexes into streptavidin yields artificial metalloenzymes for aqueous sulfoxidation using hydrogen peroxide. Four biotinylated salen ligands were synthesized and their manganese complexes were tested in combination with several streptavidin mutants, yielding moderate conversions (up to 56%) and low enantioselectivities (maximum of 13% ee) for the sulfoxidation of thioanisole.     

Modeling adsorption rate of organic micropollutants present in landfill leachates onto granular activated carbon

The overall adsorption rate of single micropollutants present in landfill leachates such as phthalic acid (PA), bisphenol A (BPA), diphenolic acid (DPA), 2,4-dichlorophenoxy-acetic acid (2,4-D), and 4-chloro-2-methylphenoxyacetic acid (MCPA) on two commercial activated carbons was studied. The experimental data obtained were interpreted by using a diffusional model (PVSDM) that considers external mass transport, intraparticle diffusion, and adsorption on an active site. Furthermore, the concentration decay data were interpreted by using kinetics models. Results revealed that PVSDM model satisfactorily fitted the experimental data of adsorption rate on activated carbon. The tortuosity factor of the activated carbons used ranged from 2 to 4. The contribution of pore volume diffusion represented more than 92% of intraparticle diffusion confirming that pore volume diffusion is the controlling mechanism of the overall rate of adsorption and surface diffusion can be neglected. The experimental data were satisfactorily fitted the kinetic models. The second-order kinetic model was better fitted the experimental adsorption data than the first-order model.     

Supramolecular architectures of streptavidin on biotinylated self-assembled monolayers. Tracking biomolecular reorganization after bioconjugation

In this work we have studied the supramolecular bioconjugation of streptavidin (SAv) on biotinylated self-assembled monolayers. By using the quartz crystal microbalance technique with dissipation we were able to follow in real time the biomolecular reorganization within the film. The overall process could be described as an early stage involving a significant increase in surface coverage followed by another stage where the SAv layer slowly reached the asymptotic coverage. Finally, a reorganization process takes place in the bioconjugated film. These results on the kinetics of biomolecular reorganization can be described in terms of the Lifshitz-Slyozov law. These are the first experimental results demonstrating the complexity and the different time scales involved on the bioconjugation of SAv at solid-liquid interfaces. We consider that these findings could have strong implications on the molecular design of biosensing platforms.     

Modeling the adsorption of citric acid onto Muloorina illite and related clay minerals

The adsorption of citric acid onto goethite, kaolinite, and illite was measured as a function of pH (adsorption edges) and concentration (adsorption isotherms) at 25 degrees C. The greatest adsorption was onto goethite and the least onto illite. Adsorption onto goethite was at a maximum below pH 5 and decreased as the pH was increased to pH 9. For kaolinite, maximum adsorption occurred between pH 4.5 and pH 7, decreasing below and above this pH region, while for illite maximum adsorption occurred between about pH 5 and pH 7, decreasing at both lower and higher pH. ATR-FTIR spectra of citrate adsorbed to goethite at pH 4.6, pH 7.0, and pH 8.8 were compared with those of citrate solutions between pH 3.5 and pH 9.1. While the spectra of adsorbed citrate resembled those of the fully deprotonated solution species, there were significant differences. In particular the C[bond]O symmetric stretching band of the adsorbed species at pH 4.6 and 7.0 changed shape and was shifted to higher wave number. Further spectral analysis suggested that citrate adsorbed as an inner-sphere complex at pH 4.6 and pH 7.0 with coordination to the surface most probably via one or more carboxyl groups. At pH 8.8 the intensity of the adsorbed bands was much smaller but their shape was similar to those from the deprotonated citrate solution species, suggesting outer-sphere adsorption. Insufficient citric acid adsorbed onto illite or kaolinite to provide spectroscopic information about the mode of adsorption onto these minerals. Data from adsorption experiments, and from potentiometric titrations of suspensions of the minerals in the presence of citric acid, were fitted by extended constant-capacitance surface complexation models. On the goethite surface a monodentate inner-sphere complex dominated adsorption below pH 7.9, with a bidentate outer-sphere complex required at higher pH values. On kaolinite, citric acid adsorption was modeled with a bidentate outer-sphere complex at low pH and a monodentate outer-sphere complex at higher pH. There is evidence of dissolution of kaolinite in the presence of citric acid. For illite two bidentate outer-sphere complexes provided a good fit to all data.     

Electronic communication and negative binding cooperativity in diborylated bithiophenes

The bifunctional conjugated organoboranes Ar2B-bt-BAr2, which contain 2,2'-bithiophene (bt) linkers and different aryl substituents on boron (3: Ar = p-tBuC6H4; 4: Ar = C6F5; 5: Ar = C6F5, Fc; Fc = ferrocenyl), have been synthesized. The electronic communication between the boron centers and cooperativity effects in the binding of pyridine have been investigated by a comprehensive study using X-ray crystallography, DFT calculations, cyclic voltammetry, 1H and 19F NMR, and UV visible absorption and emission spectroscopy. A comparison of the single-crystal X-ray structures of 4 and 4Py2 revealed a strongly diminished bond alternation in the thiophene rings for 4, indicative of a high degree of electronic delocalization. DFT calculations are in good agreement with the structural features determined from the X-ray analysis and, consistent with the experimental absorption and emission data, predict a smaller HOMO-LUMO gap for green luminescent 4 in comparison to blue luminescent 3. The complexation of pyridine to the two boron centers was further investigated by 1H and 19F NMR for 4 and by 1H NMR and UV-visible absorption spectroscopy for 3. We found that binding of the first pyridine molecule to one of the boryl groups significantly lowers the Lewis acidity of the other boryl group. For 3, the interaction parameter a, which provides a measure of communication between the boron sites, was determined to be a = 0.23 by UV-visible titration and 0.21 by 1H NMR spectroscopy. Further enhanced electronic communication was observed for the more highly Lewis acidic fluorinated derivative 4, for which a = 0.025 according to 19F and 1H NMR spectroscopy.     

Preparation of biotinylated glyconanoparticles via a photochemical process and study of their bioconjugation to streptavidin

We report here the preparation of novel biotinylated glyconanoparticles from well-defined biotinylated glycopolymers and poly(N-isopropylacrylamide) (PNIPAAm) synthesized via the reversible addition fragmentation chain transfer (RAFT) polymerization process. The in situ reduction of the biotinylated glycopolymers, PNIPAAm, poly(ethylene glycol), and HAuCl4 via a photochemical process resulted in the formation of biotinylated gold nanoparticles. The multifunctional biotinylated glyconanoparticles were then evaluated for their bioconjugation toward streptavidin using UV-vis spectroscopy and surface plasmon resonance (SPR). The biotinylated nanoparticles underwent aggregation in the presence of streptavidin as revealed by spectrophotometry, which indicates the accessibility of the biotin for conjugation. These results were further confirmed by surface plasmon resonance even in the case of surface-immobilized streptavidin.     

Monolayer adsorption onto triangular lattice

A simple model of monolayer adsorption on homogeneous solid surfaces of triangular symmetry is presented. This model takes into account the effects of three-fold positional degeneracy of adsorption sites and of partial mobility of adsorbed layer. The model predicts phase transitions in adsorbed layers analogous to those found in experimental systems.

---

Einschichtadsorption auf triangularem Gitter

Zusammenfassung Es wird ein einfaches Modell für die Adsorption einer Schicht auf einer homogenen festen Oberfläche von triangularer Symmetrie präsentiert. Das Modell berücksichtigt den Effekt der dreifachen Positionsdegenierung von Adsorptionsstellen und auch den Einfluß der partiellen Mobilität der adsorbierten Schicht. Das Modell erlaubt die Voraussage von Phasenübergängen in der adsorbierten Schicht, die in Analogie zu experimentellen Systemen stehen.

     

Surfactant adsorption onto cellulose surfaces

The adsorption of the cationic surfactant, hexadecyl trimethyl ammonium bromide, C16TAB, onto model cellulose surfaces, prepared by Langmuir-Blodgett deposition as thin films, has been investigated by neutron reflectivity. Comparison between the adsorption of C16TAB onto hydrophilic silica, a hydrophobic cellulose surface, and a regenerated (hydrophilic) cellulose surface is made. Adsorption onto the hydrophilic silica and onto the hydrophilic cellulose surfaces is similar, and is in the form of surface aggregates. In contrast, the adsorption onto the hydrophobic cellulose surface is lower and in the form of a monolayer. The impact of the surfactant adsorption and the in situ surface regeneration on the structure of the cellulose thin films and the nature of solvent penetration into the cellulose films are also investigated. For the hydrophobic cellulose surface, intermixing between the cellulose and surfactant occurs, whereas there is little penetration of surfactant into the hydrophilic cellulose surface. Measurements show that solvent exchange between the partially hydrated cellulose film and the solution is slow on the time scale of the measurements.     

Modeling synergistic adsorption of phenol/aniline mixtures in the aqueous phase onto porous polymer adsorbents

The adsorption equilibria of phenol and aniline on nonpolar polymer adsorbents (NDA-100, XAD-4, NDA-16 and NDA-1800) were investigated in single- and binary-solute adsorption systems at 313 K. The results showed that all the adsorption isotherms of phenol and aniline on these adsorbents can be well fitted by Freundlich and Langmuir equations, and the experimental uptake of phenol and aniline in all binary-component systems is obviously higher than predicted by the extended Langmuir model, arising presumably from the synergistic effect caused by the laterally acid-base interaction between the adsorbed phenol and aniline molecules. A new model (MELM) was developed to quantitatively describe the synergistic adsorption behavior of phenol/aniline equimolar mixtures in the binary-solute systems and showed a marked improvement in correlating the binary-solute adsorption of phenol and aniline by comparison with the widely used extended Langmuir model. The newly developed model confirms that the synergistic coefficient of one adsorbate is linearly correlated with the adsorbed amount of the other, and the larger average pore size of adsorbent results in the greater synergistic effect of phenol/aniline equimolar mixtures adsorption.     

Modeling the adsorption of Cd(II) onto goethite in the presence of citric acid

The adsorption of cadmium onto goethite in the presence of citric acid was measured as a function of pH and cadmium concentration at 25 degrees C. Potentiometric titrations were also performed on the system. Cadmium adsorption onto goethite was enhanced above pH 4 in the presence of 50 microM, 100 microM and 1 mM citric acid. While there was little difference between the enhancements caused by 50 and 100 microM citric acid below pH 6, above pH 6 further enhancement is seen in the presence of 100 microM citric acid. When 1 mM citric acid was present, the enhancement of cadmium adsorption was greater below pH 6, with increased Cd(II) adsorption down to pH 3.5. However, above pH 6, 1 mM of citric acid caused slightly less enhancement than the lower citric acid concentrations. ATR-FTIR spectra of soluble and adsorbed citrate-cadmium species were measured as a function of pH. At pH 4.6 there was very little difference between the ternary Cd(II)-citric acid-goethite spectrum and the binary citric acid-goethite spectrum. However, spectra of the ternary system at pH 7.0 and 8.7 indicated the presence of additional surface species. Further analysis of the spectra suggested that these were metal-ligand outer-sphere complexes. Data from the adsorption experiments and potentiometric titrations of the ternary Cd(II)-citric acid-goethite system were fitted by an extended constant-capacitance surface complexation model. The spectroscopic data were used to inform the choice of surface species. Three reactions in addition to those for the binary Cd(II)-goethite and citric acid-goethite systems were required to describe all of the data. They were [formula in text], [formula in text], and [formula in text]. Neither the spectroscopy nor the modeling suggested the formation of a ternary inner-sphere complex or a surface precipitate under the conditions used in this study.     

Surface organization and cooperativity during nonspecific protein adsorption events

Despite many experimental studies on cooperative effects during protein adsorption events, this phenomenon is still poorly characterized and subject of much controversy. In this study, we address the topic of cooperativity using two distinct experimental approaches, namely, kinetic analysis and surface imaging, both based on supercritical angle fluorescence (SAF) microscopy. Several model systems comprising the two proteins BSA and fibrinogen, two different ionic strength conditions and varying pH environments were investigated. The combination of the experimental information obtained from kinetic analysis and from real-time in situ scan images unravel a clear correlation between cooperative adsorption and a heterogeneous protein layer build-up. We propose a mechanistic model of protein adsorption based on an overlap of classical Langmuir-type adsorption on unoccupied surface areas and an additional cooperative adsorption pathway near preadsorbed proteins which is consistent with the experimental observations. Moreover, the growth of two-dimensional surface clusters as an often assumed element of cooperativity could be excluded for the studied systems. The model includes the often observed phenomenon that the adsorption rate decelerates abruptly above a certain coverage limit. Furthermore, the observed evolution of the heterogeneous protein distribution on the surface is in good agreement with the proposed model.     

Proton interaction in phosphate adsorption onto goethite

The adsorption of phosphate on goethite is generally modeled by assuming a simple ligand exchange reaction with surface hydroxyl groups. This study investigates the binding forms of phosphate on goethite by evaluating the proton interaction and surface charge change during phosphate adsorption. It is found that OH(-) release stoichiometry increases with phosphate coverage, which suggests that different mechanisms predominate at different phosphate loadings. It demonstrates that surface binding changes from monodentate complexation to bidentate complexation with increasing surface phosphate coverage. The net OH(-) release accompanying this transformation is best interpreted with a 2pK(a) multisite model.     

Modeling the adsorption of Cd(II) onto Muloorina illite and related clay minerals

The adsorption of Cd(II) onto goethite, kaolinite, and illite was measured as a function of pH (adsorption edges) and concentration (adsorption isotherms) at 25 degrees C. As the pH was increased, adsorption onto goethite occurred mainly in the pH range 5.5-8, whereas adsorption onto kaolinite occurred in two stages, separated by a plateau in the pH region 5.5 to 7. Adsorption onto illite increased steadily as the pH was increased, with far less Cd(II) adsorbing onto illite than onto goethite or kaolinite per m(2) of mineral surface area. Potentiometric titrations of suspensions of each mineral, with and without Cd(II) present, were also completed. Results from all three types of experiments were modeled using an extended constant- capacitance surface complexation model. The reactions [Formula: see text] [Formula: see text] and [Formula: see text] best described Cd(II) adsorption onto goethite, while [Formula: see text] and [Formula: see text] best described Cd(II) adsorption onto kaolinite. A combination of the first, second, and fourth of these reactions best fitted the data for Cd(II) adsorption onto illite. In each case the model fitted all experimental data well. The results suggest that adsorption onto the variable charge (SOH) sites on illite more closely resembles adsorption onto goethite than onto kaolinite.     

Electrophoretic behavior of streptavidin complexed to a biotinylated probe: a functional screening assay for biotin-binding proteins

The biotin-binding protein streptavidin exhibits a high stability against thermal denaturation, especially when complexed to biotin. Herein we show that, in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), streptavidin is stabilized at high temperature in the presence of biotinylated fluorescent probes, such as biotin-4-fluorescein, which is incorporated within the binding pocket. In nondenaturing SDS-PAGE, streptavidin is detectable when complexed with biotin-4-fluorescein using a UV-transilluminator. Using biotin-4-fluorescein, the detection limit of streptavidin lies in the same range as with Coomassie blue staining. The functionality of streptavidin mutants can readily be assessed from crude bacterial extracts using biotin-4-fluorescein as a probe in nondenaturing SDS-PAGE.