支化PEG-b-PCL嵌段共聚合物的合成

以聚乙二醇甲基丙烯酸酯(PEGMA)为大分子引发剂进行ε-己内酯的酶催化开环聚合, 合成出嵌段共聚物, 然后将其转化成大分子引发剂型单体(Macroinimer), 最后通过原子转移自由基聚合(ATRP)制备出一种新型结构的嵌段型支化聚合物.     

酶促开环聚合和原子转移自由基聚合制备新型H型嵌段共聚物

在生物酶催化剂Novozyme-435的作用下, 乙二醇引发己内酯(ε-CL)酶促开环聚合, 再用三乙胺作催化剂, 将PCL端羟基与2,2-二氯代乙酰氯反应, 生成四官能度大分子引发剂, 引发甲基丙烯酸环氧丙酯(GMA)的原子转移自由基聚合(ATRP), 合成了H型三嵌段共聚物(PGMA)2-b-PCL-b-(PGMA)2. 嵌段共聚物的结构通过核磁共振和凝胶渗透色谱(GPC)得到了确证, 其多分散性为1.32, 分子量为32000. 通过差热扫描量热法对嵌段共聚物的热性能进行了研究.     

以二硫键连接的两嵌段共聚物的制备新方法

报道了一种制备二硫键连接的两嵌段共聚物的新方法.以可逆加成-断裂链转移自由基聚合(RAFT)制备聚苯乙烯大分子链转移剂(PS-RAFT),经伯胺还原得到巯基封端的PS(PS-SH).PS-SH与原子转移自由基聚合(ATRP)引发剂2-溴-2-甲基丙酸-2-(2-吡啶基二硫)乙酯发生交换反应,得到含有二硫键的聚苯乙烯大分子ATRP引发剂(PS-S-S-Br).以PS-S-S-Br引发甲基丙烯酸-2-羟基乙酯(HEMA)的ATRP聚合反应,合成了由二硫键连接的两嵌段共聚物PS-S-S-PHEMA.将PS-S-S-PHEMA可在甲醇中自组装形成以PS为核,PHEMA为壳的球形聚合物胶束,为制备新型含二硫键聚合物提供了新的合成方法.     

一种含乙氧羰基偶氮苯液晶三嵌段共聚物的合成与表征

利用原子转移自由基聚合(ATRP),合成了一种含有乙氧羰基偶氮苯的液晶三嵌段共聚物,并合成了一种同样偶氮生色团的均聚物进行对比.均聚物(PC6ET)由偶氮单体甲基丙烯酸{6-[4-(4-乙氧羰基苯基偶氮)苯氧基]己酯}(C6ET)的ATRP反应制备.嵌段共聚物的合成,先通过聚环氧乙烷(PEO)和过量的2-溴异丁酰溴、三乙胺反应,得到双端大分子引发剂(Br-PEO-Br);再进一步通过C6ET的ATRP反应,得到了三嵌段共聚物(PC6ET-PEO-PC6ET).热分析、偏光显微镜观察和X射线衍射实验证实,合成的均聚物和嵌段共聚物均为近晶型液晶聚合物.三嵌段共聚物的液晶清亮点比均聚物的稍低.     

聚甲基丙烯酸甲酯-聚甲基丙烯酸两亲性嵌段共聚物的制备及自组装形态的研究

以2-溴异丁酸乙酯为引发剂, 氯化亚铜/联二吡啶为催化剂, 通过原子转移自由基聚合(ATRP)获得分子链末端含一个α-溴原子的聚甲基丙烯酸甲酯(PMMA-Br), 以此为大分子引发剂引发甲基丙烯酸铅[Pb(MA)₂]单体进行ATRP反应, 制得P[MMA-b-Pb(MA)_2]嵌段共聚物, 将此共聚物在盐酸中进行离子交换即得聚甲基丙烯酸甲酯-聚甲基丙烯酸的两亲性嵌段共聚物[P(MMA-b-MAA)]. 用FTIR, GPC, NMR和SEM方法对共聚物进行了表征.     

新型水溶性共轭嵌段含糖聚合物的合成与表征

以两端溴化的聚9,9-二己基芴作为大分子引发剂, 6-O-甲基丙烯酰基-1,2∶3,4-二-O-异亚丙基-D-吡喃型半乳糖(6-O-Methacryloyl-1,2∶3,4-di-O-isopropylidene-D-galactopyranose, MaIpGa)为单体, 氯化亚铜/1,1,4,7,10,10-六甲基三乙基四胺为催化剂, 通过原子转移自由基聚合(ATRP), 合成了一种新型的具有良好光学性能的三嵌段共聚物聚甲基丙烯酸羟基保护半乳糖酯-聚芴-聚甲基丙烯酸羟基保护半乳糖酯(PMaIpGa-PF-PMaIpGa). 在酸性条件下进一步水解, 得到水溶性的聚甲基丙烯酸半乳糖酯-聚芴-聚甲基丙烯酸半乳糖酯(PMaGa-PF-PMaGa)三嵌段聚合物, 其结构和分子量(分布)通过核磁共振、红外光谱和凝胶渗透色谱(GPC)确证, 并研究了其紫外-可见和荧光光谱特性.     

基于苯氧基联烯的两亲性嵌段共聚物的合成

运用机理转换策略,结合自由基聚合和原子转移自由基聚合(ATRP),制备了含有聚联烯链段的两亲性三嵌段共聚物.设计合成了含有偶氮和ATRP引发基团的双官能团引发剂,先用该双官能团引发剂引发苯氧基联烯单体的自由基聚合,得到了含有ATRP引发基团的聚联烯大分子引发剂,然后该大分子引发剂引发亲水性单体N,N-二乙基氨乙基甲基丙烯酸酯(DEAEMA)的ATRP聚合,制得了聚N,N-二乙基氨乙基甲基丙烯酸酯-聚联烯-聚N,N-二乙基氨乙基甲基丙烯酸酯(PDEAEMA-b-PPOA-b-PDEAEMA).该三嵌段共聚物能在水溶液中形成胶束,通过荧光探针技术分别测定了它在不同离子浓度、不同p H值条件下的临界胶束浓度.实验结果表明,该聚合物胶束的cmc随着p H值增大而减小,随着离子浓度的增大而增大.     

ATRP法合成两亲的含氟柱状刷PBIEM-g-(PAA-b-PFA)

以聚甲基丙烯酸[2-(2-溴异丁酰氧)]乙酯(PBIEM)为大分子引发剂,采用接出(grafting from)原子转移自由基聚合(ATRP)技术合成了以聚丙烯酸叔丁酯-b-聚含氟丙烯酸酯为侧链的柱状分子刷PBIEM-g-(PtBA-b-PFA).通过GPC,1H-NMR和FTIR对PBIEM-g-(PtBA-b-PFA)组成和结构进行了表征,证实ATRP过程中没有发生分子间或分子内偶合反应,制备得到可控性好的含氟嵌段共聚物刷.利用大分子链中叔丁酯基团的水解反应生成两亲的含氟柱状刷PBIEM-g-(PAA-b-PFA),原子力显微镜可直接观察到PBIEM-g-(PAA-b-PFA)特征的核壳型柱状结构,得到聚合物刷的整体长度为ln=54~72 nm.     

两亲性三嵌段共聚物PAA-PHB-PAA的合成及表征

本文用ATRP方法, 以两端溴化的聚β-羟基丁酸酯链段(Br-PHB-Br)作为大分子引发剂, 丙烯酸叔丁酯为单体, 合成了一种新的三嵌段共聚物聚丙烯酸叔丁酯-聚β-羟基丁酸酯-聚丙烯酸叔丁酯(PtBA-PHB-PtBA). 在酸性条件下进一步水解, 得到了一种两亲性的聚丙烯酸-聚β-羟基丁酸酯-聚丙烯酸(PAA-PHB-PAA)三嵌段共聚物.     

酶促开环聚合合成双亲性H型嵌段共聚物及其自组装

通过固定化酶Novozyme435（NV435）催化聚乙二醇（PEG）开环聚合己内酯（CL）得到端基带有羟基的ABA型三嵌段聚合物,用2,2-二氯代乙酰氯将聚合物的端羟基功能化形成H型大分子引发剂,在CuCl／HMTETA体系中引发4-乙烯基吡啶（4VP）进行原子转移自由基聚合反应（ATRP）,得到了具有两亲性的H型五嵌段聚合物（PVP）2-b—PCL-b．PEG-PCL-（PVP）2,用红外光谱（FT IR）,核磁共振（^1H NMR）,凝胶渗透色谱（GPC）对其结构与分子量及其分子量分布进行了表征,结果表明：H型五嵌段聚合物分子量46121g／mol,分子量分布1．30．并利用动态光散射（DLS）和原子力显微镜（AFM）对聚合物在水溶液中的自组装行为进行了研究,H型嵌段聚合物的胶束呈球形结构,平均直径为70nm左右．     

含铕荧光两亲接枝共聚物的制备及胶束化行为

以丙烯酸(AA)、 苯甲酸(BA)和邻菲啰啉(Phen)为配体, Eu³⁺为中心离子, 制备了可聚合荧光配合物单体, 并以此单体为功能单体, 聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)和甲基丙烯酸六氟丁酯(HFMA)为共聚单体, 通过溶液聚合制备出含铕两亲荧光接枝共聚物P-[HFMA-co-Eu(AA)(BA)₂Phen]g-PEG. 利用红外光谱(FTIR)和核磁共振波谱(¹H NMR和¹⁹F NMR)对共聚物的结构进行表征; 采用表面张力法测定共聚物的临界胶束浓度(cmc)为0.20 g/L; 通过透射电子显微镜(TEM)和动态光散射仪(DLS)观察胶束的形貌及其胶束化行为, 发现该共聚物可以形成大小均一的球形胶束, 且随着共聚物浓度的提高, 胶束粒径相应增大; 在溶液浓度达到临界胶束浓度时, 溶液荧光出现强度突变.     

Synthesis and surface properties of a new fluorinated acrylic diblock copolymer via AGET ATRP

A series of fluorinated diblock copolymers poly(2,2,3,4,4,4-hexafluorobutyl methacrylate)-b-poly(glycidyl methacrylate) PHFMA-b-PGMA with different fluorine content were synthesized by activator generated by electron transfer atom transfer radical polymerization (AGET ATRP). FTIR, ¹H NMR and GPC data verified feasibility and controllability of the synthesis. In order to evaluate the effect of chain structure on the surface properties, corresponding homopolymer poly(2,2,3,4,4,4-hexafluorobutyl methacrylate) and random copolymer copoly(2,2,3,4,4,4-hexafluorobutyl methacrylate-r-glycidyl methacrylate) were also comparatively studied. Contact angle measurements indicated that the water and ethyleneglycol contact angles of block- and random copolymers increased with increase of fluorine content, but in different manner. This difference comes from different surface energy at the same fluorine content on film surface. The surface stability of block-copolymer was obviously better than that of random copolymer; the same results were observed in heat resistance tests.     

阴离子型含氟两亲接枝共聚物的合成及其胶束化行为研究

以聚乙二醇甲醚甲基丙烯酸酯(MPEGMA)为大分子单体,甲基丙烯酸六氟丁酯(HFMA)、对苯乙烯磺酸钠(NaSS)为共聚单体,采用大分子单体接枝共聚法,制备了一种阴离子型含氟两亲接枝共聚物P( HFMA-co-NaSS) -g-PEG.利用FTIR、1H-NMR和19F-NMR对共聚物的分子结构进行了表征.表面张力法测...     

温敏性含氟两亲接枝共聚物的制备及胶束化行为

以聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)为大分子单体, 甲基丙烯酸六氟丁酯(HFMA)为含氟单体, N-异丙基丙烯酰胺(NIPAAm)为功能性单体, 采用大分子单体接枝共聚法, 制备了一种温敏性含氟两亲接枝共聚物P(NIPAAm-co-HFMA)-g-PEG. 利用FTIR, ¹H NMR, ¹⁹F NMR和GPC对共聚物的结构进行表征; 采用紫外-可见分光光度计测定了共聚物的低临界溶解温度(LCST)约为38.9 ℃, 高于人体正常的生理温度; 利用荧光探针技术测定了共聚物的临界胶束浓度(cmc), 结果表明, 当共聚物溶液温度高于LCST时, 其cmc明显变小; 利用激光光散射粒度仪(LLS)测定了共聚物胶束的水合粒径及其分布, 当温度达到LCST时, 胶束粒径明显变小, 温度过高时, 粒径又有所增大; 利用透射电子显微镜(TEM)研究了共聚物胶束的形貌, 结果表明, P(NIPAAm-co-HFMA)-g-PEG在水溶液中可自组装成球状胶束粒子, 随着温度的升高, 共聚物胶束由松散的核壳结构转变成更加紧凑的球状结构, 且粒径明显变小.     

Synthesis and characterization of a new fluorinated macroinitiator and its diblock copolymer by AGET ATRP

A new fluorinated macroinitiator of poly 2,2,3,4,4,4-hexafluorobutyl methacrylate-Br (PHFMA-Br) was prepared via activator generated by electron transfer atom transfer radical polymerization (AGET ATRP), and then a series of fluorinated block copolymers with different fluorine content were successfully synthesized from the macroinitiator by the second step AGET ATRP. GPC, FTIR and ¹H NMR data obtained verified the synthesis. Contact angle measurement indicated that proper fluorine content could decrease the surface energy and increase the contact angle of the copolymer films. XPS characterization showed that the large difference in surface energy between the block and random copolymer film resulted from the difference of the fluorine content on the surface, although the fluorine content of the two copolymers in bulk was similar. The self-assembly behavior of the fluorinated block copolymer in selective solvents was evaluated by the TEM study, and the stable micelles with a core-shell structure were observed when the copolymer content was about 1 wt%.     

两亲性RAFT试剂存在下丙烯酸六氟丁醋和苯乙烯的无皂乳液聚合

合成了具有两亲性结构的可逆加成断裂链转移(RAFT)试剂,在RAFT试剂的作用下,通过无皂乳液聚合方法合成了丙烯酸六氟丁酯与苯乙烯的共聚物.研究了RAFT试剂浓度和聚合温度对聚合动力学、聚合反应可控性及乳胶粒粒径的影响.通过红外光谱(FTIR)、核磁共振谱(1H NMR)、示差扫描量热仪(DSC)、凝胶渗透色谱仪(GPC)及表面张力仪表征了共聚物的结构、玻璃化转变温度(Tg)、分子量和分子量分布及乳胶膜表面性能.结果表明,得到的苯乙烯和丙烯酸六氟丁酯共聚物无皂乳液的乳胶粒粒径在100 nm左右且呈单分散分布.当RAFT试剂浓度高于0.016 mol/L时聚合体系有较好的可控性.共聚物乳液的乳胶膜对水和二碘甲烷的接触角都很高.     

Controlled Synthesis,Characterization and Application of Novel Functional Fluorinated Polymer By Metal-Free Anionic Polymerization

A well-defined block polymer, di-n-butyl ester terminated poly(2,2,3,4,4,4-hexafluorobutyl methacrylate (BTHFMA), was synthesized by the metal-free anionic polymerization. The tetrabutylammonium salt of di-n-butyl malonate was served as functional carbanionic initiator for the anionic polymerization of 2,2,3,4,4,4-hexafluorobutyl methacrylate in a controlled ‘living’ manner for the first time at ambient temperature. The chemical structure of this product was characterized by FT-IR, ¹H-NMR, and ¹³C-NMR. Gel permeation chromatography (GPC) results showed that the molecular weight of BTHFMA ranged from 1025 to 6582 and the molecular weight distributions were fairly narrow (Mw/Mn = 1.12–1.16). By blending the poly(methyl methacrylate-co-butyl acrylate) [P(MMA-co-BA)] with BTHFMA, we minimized the amount of the BTHFMA used while achieving a hydrophobic surface. The surface properties and compositions of the [P(MMA-co-BA)]/BTHFMA blend films were studied by contact angle and X-ray photoelectron spectroscopy (XPS). The results demonstrated that the 5 wt% blends of BTHFMA could obviously increase hydrophobic ability of the blend with a high water contact angle (98.2^o) and low surface energy (24.2mN/m). XPS results indicated the fluorine mass content of the surface of the 5 wt% blend was up to 26.6%, which suggested BTHFMA enriched on the surface of the blend.     

Synthesis of Amphiphilic ABCBA-Type Pentablock Copolymer from Consecutive ATRPs and Self-Assembly in Aqueous Solution

Summary: A novel amphiphilic ABCBA-type pentablock copolymer with properties that are sensitive to temperature and pH, poly(2-dimethylaminoethyl methacrylate)-block-poly(2,2,2-trifluoroethyl methacrylate)-block-poly(ε-caprolactone)-block-poly(2,2,2- trifluoroethyl methacrylate)-block-poly(2-dimethylaminoethyl methacrylate) (PDMAEMA- b-PTFEMA-b-PCL-b-PTFEMA-b-PDMAEMA), was synthesized via consecutive atom transfer radical polymerizations (ATRPs). The copolymers obtained were characterized by gel permeation chromatography (GPC) and ¹H nuclear magnetic resonance (NMR) spectroscopy, respectively. The aggregation behaviors of the pentablock copolymers in aqueous solution with different pH (pH = 4.0, 7.0 and 8.5) were studied. Transmission electron microscopic images revealed that spherical micelles from self-assembly of the pentablock copolymer were prevalent in all cases. The mean diameters of these micelles increased from 34, 46, to 119 nm when the pH of the aqueous solution decreased from 8.5, 7.0, to 4.0, respectively.     

Sequential synthesis of multiblock copolymers by atom transfer radical and cationic polymerization

ABCBA‐type pentablock copolymers of methyl methacrylate (MMA), styrene (S), and isobutylene (IB) were prepared by a three‐step synthesis, which included atom transfer radical polymerization (ATRP) and cationic polymerization: (1) poly(methyl methacrylate) (PMMA) with terminal chlorine atoms was prepared by ATRP initiated with an aromatic difunctional initiator bearing two trichloromethyl groups under CuCl/2,2′‐bipyridine catalysis; (2) PMMA with the same catalyst was used for ATRP of styrene, which produced a poly(S‐b‐MMA‐b‐S) triblock copolymer; and (3) IB was polymerized cationically in the presence of the aforementioned triblock copolymer and BCl₃, and this produced a poly(IB‐b‐S‐b‐MMA‐b‐S‐b‐IB) pentablock copolymer. The reaction temperature, varied from ?78 to ?25 °C, significantly affected the IB content in the product; the highest was obtained at ?25 °C. The formation of a pentablock copolymer with a narrow molecular weight distribution provided direct evidence of the presence of active chlorine at the ends of the poly(S‐b‐MMA‐b‐S) triblock copolymer, capable of the initiation of the cationic polymerization of IB in the presence of BCl₃. A differential scanning calorimetry trace of the pentablock copolymer (20.1 mol % IB) showed the glass‐transition temperatures of three segregated domains, that is, polyisobutylene (?87.4 °C), polystyrene (95.6 °C), and PMMA (103.7 °C) blocks. One glass‐transition temperature (104.5 °C) was observed for the aforementioned triblock copolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6098–6108, 2004     

Heteroarm H‐shaped terpolymers through click reaction

Heteroarm H‐shaped terpolymers, (polystyrene)(poly(methyl methacrylate))‐ poly(tert‐butyl acrylate)‐(polystyrene)(poly(methyl methacrylate)), (PS)(PMMA)‐PtBA‐(PMMA)(PS), and, (PS)(PMMA)‐poly(ethylene glycol)(PEG)‐(PMMA)(PS), through click reaction strategy between PS‐PMMA copolymer (as side chains) with an alkyne functional group at the junction point and diazide end‐functionalized PtBA or PEG (as a main chain). PS‐PMMA with alkyne functional group was prepared by sequential living radical polymerizations such as the nitroxide mediated (NMP) and the metal mediated‐living radical polymerization (ATRP) routes. The obtained H‐shaped polymers were characterized by using ¹H‐NMR, GPC, DSC, and AFM measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1055–1065, 2007