4-(3,5-Dichloro-2-pyridylazo)-1-3-diaminobenzene-graphite paste electrode for end-point detection in the automatic potentiometric titration of zinc(II) with EDTA

A simple and sensitive potentiometric sensor for end-point detection in the automatic titration of Zn(II) with EDTA was prepared and studied. The sensor was based on a conventional carbon paste which was mixed during preparation with 4-(3,5-dichloro-2-pyridil-azo)-1,3-diaminobenzene (3,5-Cl2PADAB). pH effects, buffer concentration, reagent content into carbon paste and the presence of foreign salts on the electrode response were studied. Titration curves with sharp end-point breaks were obtained in Zn(II) concentration range from 0.5 to 6550 ppm. The electrode was easily made and with very inexpensive materials. A titrimetric method for the determination of zinc in insulin by automatic potentiometric end-point detection is described. It was applied to the determination of the metal in two commercial pharmaceutical preparations. The results were in good agreement with those obtained by the U.S. Pharmacopeia standard method.     

Spectrophotometric determination of copper(II) at low mug l(-1) levels using cation-exchange microcolumn in flow-injection

A simple spectrophotometric flow-injection method is reported for the highly sensitive and fast determination of copper(II). The method is based on the formation of coloured Cu(II)-(4-methylpiperidinedithiocarbamate)(2) complex when the copper solutions are introduced into a tertiary reagent stream containing 4-methylpiperidinedithiocarbamate. The coloured complex is then selectively monitored at 435 nm. To increase interactions between copper(II) and colour forming reagent and preconcentrate of copper(II), a microcolumn containing strong cation exchange resins was placed between injection manifold and spectrophotometer. The system required no mixing chamber and allowed a sample throughput >60 sample h(-1). The calibration graph was linear in the range 5-100 mug l(-1). The detection limit was <0.5 mug l(-1) for 20 mul injection volume of copper(II) ion solution. The developed method was applied to environmental, copper processing water, and ore samples.     

Catecholase activity of a series of dicopper(II) complexes with variable Cu-OH(phenol) moieties

The catecholase activity of a series of dicopper(II) complexes containing different numbers of phenol groups coordinated to the metal centers was studied to identify functional as well as structural models for the type III copper enzymes tyrosinase and catechol oxidase. The syntheses and characterization of complexes [Cu(2)(H(2)bbppnol)(mu-OAc)(H(2)O)(2)]Cl(2).2H(2)O (1) and [Cu(2)(Hbtppnol)(mu-OAc)](ClO(4))(2) (2) were previously reported by us (Inorg. Chim. Acta 1998, 281, 111-115; Inorg. Chem. Commun. 1999, 2, 334-337), and complex [Cu(2)(P1-O(-))(OAc(-))](ClO(4))(2) (3) was previously reported by Karlin et al. (J. Am. Chem. Soc. 1997, 119, 2156-2162). The catalytic activity of the complexes 1-3 on the oxidation of 3,5-di-tert-butylcatechol was determined spectrophotometrically by monitoring the increase of the 3,5-di-tert-butyl-o-benzoquinone characteristic absorption band at about 400 nm over time in methanol saturated with O(2)/aqueous buffer pH 8 solutions at 25 degrees C. The complexes were able to oxidize 3,5-di-tert-butylcatechol to the corresponding o-quinone with distinct catalytic activity. A kinetic treatment of the data based on the Michaelis-Mentèn approach was applied. The [Cu(2)(H(2)bbppnol)(mu-OAc)(H(2)O)(2)]Cl(2) small middle dot2H(2)O complex showed the highest catalytic activity of the three complexes as a result of a high turnover rate (k(cat) = 28 h(-1)) combined with a moderate substrate-catalyst binding constant (K(ass) = 1.3 x 10(3) M(-1)). A mechanism for the oxidation reaction is proposed, and reactivity differences, k(cat)/K(M) of the complexes, were found to be dependent on (DeltaE)(1,2), the difference in the driving force for the reduction reactions Cu(II)(2)/Cu(II)Cu(I) and Cu(II)Cu(I)/Cu(I)(2).     

Arsenazo, 2-(4-arsonophenyl(azo-7-(4-antipyril)azo-1,8-dihydroxy-3,6-naphtalene disulphonic acid as reagent for calcium ions. New parameters for metallochromic indicator characterization

Ca(II) ions react with arsenazo, 2-(4-arsonophenyl)-azo-7-(4-antipyril)azo-l,8-dihydroxy-3,5-naphtalene disulphonic acid, at pH 10.0 to produce a blue complex, with stoichiometry 11, and stability constant of 6.64×10⁵. Its molar absorptivity is 3.78×10⁴1·mol^–1 cm^–1. This reagent has been used as metallochromic indicator in the complexometric titration of Ca. Its colour transition has been specified by tristimulus colourimetry. New parameters are defined and compared to Ringbom's parameters.     

Extraction-spectrophotometric determination of trace iron (II) in sea water with 2-[2-(3,5-dibromopyridyl)azo]-5-diethylaminobenzoic acid

An extraction-spectrophotometric method is described for the determination of traces of iron(II) with 2-[2-(3,5-dibromopyridyl)azo]-5-diethyl-aminobenzoic acid. The reagent forms a stable and blue 12 iron/reagent complex that can be extracted into chloroform. The apparent molar absorptivity of the iron(II) complex is 1.09 × 10⁵ 1 mol^–1 cm^–1 at 624 nm in chloroform. The reagent is relatively selective; interferences from cobalt, copper, nickel and vanadium can be removed by using dimethylglyoxime and EDTA. The method is applied to the determination of iron (II) in sea water and aluminium alloys with good precision and accuracy.     

Furoin thiosemicarbazone as an analytical reagent for nickel(II), palladium(II) and copper(II)

Furoin thiosemicarbazone (FTS) reacts with Ni(II), Pd(II) and Cu(II) in aqueous medium, giving yellow solutions at pH 9, 6 and 3 respectively. The complexes have absorption maxima at 360 nm for Ni(II) and Pd(II) and 355 nm for Cu(II). At these wavelengths the reagent absorbance is negligible. The molar absorptivities are 1.54 x 10(4) [Ni(FTS)(2)], 1.98 x 10(4) [Pd(FTS)(2)] and 1.45 x 10(4) 1.mole(-1).cm(-1) (CuFTS). Beer's law is valid up to 4, 5 and 3 ppm for Ni, Pd and Cu respectively. The apparent instability constant of the Ni-FTS system is found to be 6.5 x 10(-11), of the Cu-FTS system 7.1 x 10(-7) and of the Pd-FTS system 3 x 10(-12) at the recommended pH values. The effect of various ions is reported.     

Binuclear copper(II) complexes with N4O3 coordinating heptadentate ligand: synthesis, structure, magnetic properties, density-functional theory study, and catecholase activity

The N4O3 coordinating heptadentate ligand afforded binuclear complex [Cu 2(H 2L)(mu-OH)](ClO4)2 (1) and [Cu2(L)(H2O)2]PF6 (2). In complex 1, two copper ions are held together by mu-phenoxo and mu-hydroxo bridges, whereas in complex 2, the copper centers are connected only by a mu-phenoxo bridge. In 1, both the Cu(II) centers have square pyramidal geometry (tau=0.01-0.205), whereas in the case of 2, one Cu(II) center has square pyramidal (tau=0.2517) and other one has square based pyramidal distorted trigonal bipyramidal (tau=0.54) geometry. Complexes 1 and 2 show an strong intramolecular and very weak antiferromagnetic interaction, respectively. Density-functional theory calculations were performed to establish the magneto structural correlation between the two paramagnetic copper(II) centers. Both of the complexes display a couple of one-electron reductive responses near -0.80 and -1.10 V. The complexes show significant catalytic activity at pH 8.5 on the oxidation of 3,5-di- tert-butylcatechol (3,5-DTBC) to 3,5-di- tert-butylquinone (3,5-DTBQ), and the activity measured in terms of kcat=29-37 h(-1).     

Extraction and sensitive spectrophotometric determination of ytterbium with 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol

The operating conditions for the absorptiometric determination of Yb(III) with the reagent 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol (3,5-diClDMPAP) by a liquid—liquid extraction technique are presented. The complex yields a molar absorptivity of 1.54 × 10⁵l.mole⁻¹.cm⁻¹ (λ_max = 588 nm) and an optimum concentration range of 0.025–1.360n mg/l., at pH = 10. The method developed has been applied to the determination of Yb(III) in synthetic and concrete mixtures.     

配位滴定法连续测定铜和锌的新指示剂

对2-（3,5-二氨-2-吡啶偶氮）-5-二甲基苯胺（3,5-diCl-PADMAB）作指示剂络合滴定铜和锌进行了研究。在pH5．0的乙酸-乙酸钠介质中,以3,5-diCl-PADAMAB作指示剂,EDTA为滴定剂连续测定铜和锌,滴定终点颜色变化敏锐,准确度高,铜和锌量各在0～20mg范围内与EDTA量成正比。方法用于合金中铜和锌的测定,分析结果的相对标准偏差为〈0．1％和〈0．4％。     

Spectrophotometric determination of nickel(II), palladium(II) and copper(II) in presence of each other and other ions with 1-(o-carboxyphenyl)-3-hydroxy-3-phenyltriazene

Summary 1-(o-Carboxyphenyl)-3-hydroxy-3-phenyltriazene was found to be an excellent spectrophotometric reagent for the determination of nickel(II), palladium(II) and copper(II). At pH 6.8–8.3, 2.4–3.5 and 2.2–3.8, nickel, palladium and copper form greenish yellow, yellowish orange and light green complexes with maximum absorption at 410, 410, 400 nm, respectively. The systems obey Beer's law with optimum ranges from 0.25 to 2.0 ppm for Ni(II), 0.5–4.0 for Pd(II) and 0.5–4.0 for Cu(II); the elements form 11 complexes with the instability constants 2.1×10^–5, 1.5×10^–5 and 2.0×10^–5, resepctively. Effects of other anions and cations on the colour systems have been studied and procedures for the determination of Ni(II), Pd(II) and Cu(II) in presence of each other are described.

---

Spektrophotometrische Bestimmung von Nickel(II), Palladium(II) und Kupfer(II) nebeneinander und in Gegenwart anderer Ionen mit Hilfe von 1-(o-Carboxyphenyl)-3-hydroxy-3-phenyltriazen

Zusammenfassung Ni, Pd und Cu bilden mit dem Reagens bei pH 6,8–8,3, 2,4–3,5 bzw. 2,2–3,8 grünlich-gelbe, gelblich-orange bzw. hellgrüne Komplexe mit Absorptionsmaxima bei 410, 410 bzw. 400 nm. Das Beersche Gesetz wird in den Bereichen 0,25–2,0, 0,5–4,0 bzw. 0,5–4,0 ppm befolgt. Die Elemente bilden 11-Komplexe mit den Instabilitätskonstanten 2,1 · 10^–5, 1,5 · 10^–5 bzw. 2,0 · 10^–5. Der Einfluß anderer Kationen und Anionen wurde untersucht und Arbeitsvorschriften werden angegeben.

     

Spectrophotometr1c determination of cadmium with 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol

The reaction between cadmium and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl DMPAP) in aqueous alcohol media at pH 8.8-10.7 results in an intense violet colour which is stable for at least 8 hr. The composition is 2:1 reagent:metal and the formation constant (5.29 +/- 0.01) x 10(18). Beer's law is obeyed up to 1.34 ppm of cadmium at 550 nm. The optimal concentration range (Ringbom) is between 0.16 and 0.72 ppm. The apparent molar absorptivity at 550 nm is (1.20 +/- 0.01) x 10(5) l.mole(-1). cm(-1), making the sensitivity one of the highest known. The interference due to copper(III), iron(III), cobalt(II), nickel(II), gold(III), zinc(II) and manganese(II) can be suppressed.     

A simple and selective flow-injection spectrophotometric determination of copper(II) by using acetylsalicylhydroxamic acid

A new simple, and rapid flow-injection spectrophotometric method is developed for the determination of trace amounts of Cu(II) by using a new chromogenic reagent acetylsalicylhydroxamic acid (AcSHA). The method is based on the formation of colored Cu(II)-(AcSHA)₂ complex. The optimum conditions for the chromogenic reaction of Cu(II) with AcSHA is studied and the colored (green) complex is selectively monitored at λ_max 700 nm. With the reagent carrier solvent (dimethylsulfoxide (DMSO) and acetate buffer, pH 4.2) flow-rate of 1 ml min⁻¹, a detection limit (2S) of 1 μg l⁻¹ Cu(II) was obtained at a sampling rate of 80 sample h⁻¹. The calibration graph was linear in the Cu(II) concentration range 5-120 μg l⁻¹. The relative standard deviation (n=10) was 0.64% for a sample containing 60 μg l⁻¹ Cu(II). The detailed study of various interferences confirmed the high selectivity of the developed method. The method was successfully applied to determine trace amounts of copper(II) in river and seawater samples. The accuracy of the method was demonstrated by the analysis of standard reference materials C12X3500 and C14XHS 50.     

Coordination modes between copper(II) and N-acetylneuraminic (sialic) acid from a 2D-simulation analysis of EPR spectra. Implications for copper mediation of sialoglycoconjugate chemistry relevant to human biology

The equilibrium distribution of species formed between Cu(II) and N-acetylneuraminic (sialic) acid (I, LH) at 298 K has been determined using a two-dimensional (2D) simulation analysis of electron paramagnetic resonance (EPR) spectra. In acidic solutions (pH values < 4), the major species present are Cu(2+), [CuL]+ [logbeta = 1.64(4)], and [CuL2] [logbeta = 2.77(5)]. At intermediate pH values (4.0 < pH < 7.5), [CuL2H-1]- [logbeta = -2.72(7)] and two isomers of [CuLH-1] [logbeta (overall) = -3.37(2)] are present. At alkaline pH values (7.5 < pH < 11), the major species present is [CuL2H-2]2-, modeled as three isomers with unique giso and Aiso values [logbeta (overall) = -8.68(3)]. Two further species ([CuLH-3]2- and [CuL2H-3]3-) appear at pH values > 11. It is proposed that [CuL]+ most likely features I coordinated via the deprotonated carboxylic acid group (O1) and the endocyclic oxygen atom (OR) forming a five-membered chelate ring. Select Cu(II)-I species of the form [CuLH-1] may feature I acting as a dianionic tridentate chelate, via oxygen atoms derived from O1, OR, and one deprotonated hydroxy group (O7 or O8) from the glycerol tail. Alternatively, I may coordinate Cu(II) in a bidentate fashion as the tert-2-hydroxycarboxylato (O1,O2) dianion. Spectra predicted for Cu(II)-I complexes in which I is coordinated in either a O1,OR {I1-} or O1,O2 {I2-} bidentate fashion {e.g., [CuL]+ (O1,O R), [CuL2] (bis-O1,O R), [CuLH-1] (isomer: O1, O2), [CuL2H-1]- (O1, O R; O1, O2), and [CuL2H-2]2- (isomer: bis-O1, O2)} have "irregular" EPR spectra that are ascribed to the existence of Cu(II)-I(monomer) <==> Cu(II)-I(polymer) equilibria. The formation of polymeric Cu(II)-I species will be favored in these complexes because the glycerol-derived hydroxyl groups at the complex periphery (O, 7O, 8O9) are available for further Cu(II) binding. The presence of polymeric Cu(II)-I species is supported by EPR spectral data from solutions of Cu(II) and the homopolymer of I, colominic acid (Ipoly). Conversely, spectra predicted for Cu(II)-I complexes where I is coordinated in a {I2-} tridentate {e.g., [CuLH-1] (isomer: O1, O R, O7, or O8) and [CuL2H-2]2- (isomer: bis-O1,O R,O7, or O8)} or tetradentate fashion {I3-} {e.g., [CuLH-3]2- (O1, O R, O, 8O9)} are typical for mononuclear tetragonally elongated Cu(II) octahedra. In this latter series of complexes, the tendency toward the formation of polymeric Cu(II)-I analogues is small because the polydentate I effectively wraps up the mononuclear Cu(II) center. This work shows that Cu(II) could potentially mediate the chemistry of sialoglycoconjugate-containing proteins in human biology, such as the sialylated amyloid precursor protein of relevance to Alzheimer's disease.     

4-(N,N-diethylamino) benzaldehyde thiosemicarbazone in the spectrophotometric determination of palladium

4-(N,N-diethylamino)benzaldehyde thiosemicarbazone(DEABT) is proposed as a sensitive and selective analytical reagent for the spectrophotometric determination of palladium(II). The reagent reacts with palladium (II) in a potassium hydrogen phthalate-hydrochloric acid buffer of pH 3.0, to form a yellow complex. Beer's law is obeyed in the concentration range up to 3.60 microgmL(-1). The optimum concentration range for minimum photometric error as determined by Ringbom plot method is 0.36 - 3.24 microg mL(-1). The yellow Pd(II)-DEABT complex shows a maximum absorbance at 408 nm, with molar absorptivity of 3.33 x 10(4) dm3 mol(-1) cm(-1) and Sandell's sensitivity of the complex from Beer's data, for D = 0.001, is 0.0032 microg cm(-2). The composition of the Pd(II)-DEABT complex is found to be 1:2 (M:L). The interference of various cations and anions in the method were studied. The proposed method was successfully used for the determination of Pd(II) in alloys, catalysts, complexes and model mixtures with a fair degree of accuracy.     

Dehydroacetic acid as a reagent for the separation and gravimetric determination of copper(II), aluminium and beryllium

Dehydroacetic acid is proposed as a reagent for the gravimetric determination of copper(II), aluminium and beryllium at pH 3.0-6.0, 3.0-6.0 and 7.5-9.5 respectively. Copper is weighed as the complex Cu(C(8)H(7)O(4))(2). Aluminium and beryllium are weighed as Al(2)O(8) and BeO. The reagent is easy to prepare.     

Selective determination of cobalt using polyurethane foam and 2-(2-benzothiazolylazo)-2-p-cresol as a spectrophotometric reagent

The present work describes a selective, rapid and economical method for the determination of cobalt using the 2-(2-benzothiazolylazo)-p-cresol (BTAC) as a spectrophotometric reagent associated with a solid extraction on polyurethane foam. The BTAC reacts with Co(II) in the presence of Triton-X100 surfactant forming a green complex with maximum absorption at 615 nm. The reaction is used for cobalt determination within a pH range of 6.50-7.50, with an apparent molar absorptivity of 1.62 x 10(4) L mol(-1) cm(-1). Beer's Law is obeyed for a concentration of at least 1.60 microg ml(-1). A selective procedure is proposed for cobalt determination in the presence of Fe(II), Hg(II), Zn(II) and Cu(II) up to milligram levels using masking agents. Polyurethane foam is used for the preconcentration and separation of cobalt from thiocyanate media and this procedure is applied to its determination in nickel salts and steel alloys.     

Photometric determination of aqueous cobalt (II), nickel (II), copper (II) and iron (III) with 1-nitroso-2-naphthol-3,6-disulfonic acid disodium salt in gelatin films

Photometric determination of aqueous Co(II), Cu(II), Ni(II) and Fe(III) was performed using indicator films prepared by immobilization of 1-nitroso-2-naphthol-3,6-disulfonic acid disodium salt (NRS) into hardened photographic film. Immobilization was based on electrostatic interaction of reagent and metal complexes with the gelatin. The isoelectric point pH of hardened gelatin (4.46±0.04) was evaluated by viscometry. Co(II), Fe(III), Ni(II) form 1:3 complexes with NRS in gelatin at pH 2 and Cu(II) forms 1:2 complexes. Their log β′ values were: Co-6.7, Fe-8.6, Cu-8.0, and Ni-6.4. The absorption maxima were: 370nm for NRS, and 430nm, 470nm, 495nm and 720nm for complexes of Co(II), Ni(II), Cu(II) and Fe(III). An algorithm for their simultaneous determination using the indicator films was developed. The detection limits were: c_lim(Co²⁺) = 0.45×10⁻⁵ M, c_lim(Fe³⁺) = 0.50×10⁻⁵ M, c_lim(Cu²⁺) = 0.67×10⁻⁵ M, c_lim(Ni²⁺) = 0.75×10⁻⁵ M,; and their sum c_lim(ΣMn⁺) = 0.82×10⁻⁵ M.      

Studies on the extraction of Copper(II) with 4-alkyldithiocarboxylate derivatives of 1-phenyl-3,5-dioxopyrazolidine

The extraction behaviour of copper(II) from acid solutions (pH 0-6) was studied with the new reagent 4-alkyldithiocarboxylate-3,5-dihydroxy-l-phenylpyrazol (HL; alkyl = n-butyl, n-dodecyl). The species extracted was found to be ML(2). The reagent was used to separate copper(II) from iron(III) in an acidic lixiviation solution of a mineral sample composed of enarguite (Cu(3)AsS(4)) and pyrite (FeS(2)). Additionally, the extraction efficiency of this new reagent was compared with the commercially available LIX 984 N extradant of copper (II).     

Syntheses, structures, and magnetic properties of unusual nonlinear polynuclear copper(II) complexes containing derivatives of 1,2,4-triazole and pivalate ligands

Novel polynuclear Cu(II) complexes containing derivatives of 1,2,4-trizaole and pivalate ligands, [Cu(3)(mu(3)-OH)(mu-adetrz)(2)(piv)(5)(H(2)O)].6.5H(2)O (1) (adetrz = 4-amino-3,5-diethyl-1,2,4-triazole, piv = pivalate), [Cu(4)(mu(3)-OH)(2)(mu-atrz)(2)(mu-piv)(4)(piv)(2)].2MeOH.H(2)O (2) (atrz = 4-amino-1,2,4-triazole), [Cu(4)(mu(3)-OH)(2)(mu-tbtrz)(2)(mu-piv)(2)(piv)(4)].4H(2)O (3) (tbtrz = 4-tert-butyl-1,2,4-trizaole), and [Cu(4)(mu(3)-O)(2)(mu-admtrz)(4)(admtrz)(2)(mu-piv)(2)(piv)(2)].2[Cu(2)(mu-H(2)O)(mu-admtrz)(piv)(4)].13H(2)O [4 = 4a.2(4b).13H(2)O; admtrz = 4-amino-3,5-dimethyl-1,2,4-triazole], have been prepared and structurally characterized. 1 is an asymmetrical triangular complex containing a [Cu(3)(mu(3)-OH)] core with two Cu---Cu edges spanned by bridging adetrz ligands. 2, 3, and 4a are novel tetranuclear compounds containing a [Cu(4)(mu(3)-O)(2)] or [Cu(4)(mu(3)-OH)(2)] core with Cu---Cu edges spanned by bridging 1,2,4-triazole or pivalate ligands. 4b is a dinuclear compound with one admtrz and one water bridge, and it is the first dinuclear Cu(II) triazole complex with one bridging water molecule. 1 is one of few reported triangular Cu(II) complexes with derivatives of 1,2,4-triazole, while 2, 3, and 4a are the first group of the nonlinear tetranuclear Cu(II) compounds with derivatives of 1,2,4-triazole. Variable-temperature magnetic susceptibility studies on the powder samples of 1-3 reveal the overall antiferromagnetic coupling between Cu(II) ions with J values of -55.6 to -12.8 cm(-1) (1), -216.4 to 0 cm(-1) (2), and -259.8 to 4.8 cm(-1) (3).     

Reaction between copper(I)-thiourea and bismuth(III)-thiourea complexes in presence of iodide. New spot-tests for copper(II) and bismuth(III)

New and very simple spot tests are described for the detection of Bi(III), Cu(II) and I(-) ions with limits of detection of 3, 8, and 75 mug/0.05 ml respectively. Tests are also described for such combinations as Bi(III) + I(-); Bi(III) + Cu(II); and Bi(III) + Cu(II) + I(-). All the tests are based on the formation of an orange or red-orange precipitate of bismuth(III)-copper(I)-iodide-thiourea complex, for which the formula [Bi(tu)(3)I(3).Cu(tu)(3)I] (where tu = thiourea) is proposed. This complex is produced in various ways by the interaction of Bi(III), Cu(II), and I(-) ions with thiourea. Most cations and anions do not interfere, but Tl(I), Cs(I), SO(2-)(3), S(2)O(2-)(3), EDTA, and oxidizing ions such as NO(-)(2), IO(-)(3), IO(-)(4), BrO(-)(3), and MnO(-)(4) do. The complex hexakis(thioureato)sulphatomonoaquodicopper(I) [Cu(2)(tu)(6)SO(4).H(2)O] is proposed as a new spot-test reagent for Bi(III) and I(-) ions, although the sensitivity for the latter is poor.