Selective extraction and spectrophotometric determination of titanium(IV) with 2-thenoyltrifluoroacetone

A new rapid method is suggested for simultaneous extraction and spectrophotometric determination of titanium with 2-thenoyltrifluoroacetone (TTA). The greenish-yellow chelate of titanium(IV)-TTA can be extracted with isoamvl alcohol-benzene and measured at 430 mm. The extraction can be carried out in presence of Al, Cr(III), Th, Zr, Mo, W, borate, phosphate, citrate, tartrate and EDTA.     

Extraction and spectrophotometric determination of titanium(IV) with alizarin and fluoride

The characteristics of the mixed-ligand titanium(IV)-fluoride-alizarin complex, including the optimum conditions of formation and extraction into methyl isobutyl ketone, are described. A simple and sensitive procedure for spectrophotometric determination of titanium has been developed. At pH 9.5-10.3 titanium reacts with alizarin in the presence of fluoride to form a red-violet complex that is completely extractable into methyl isobutyl ketone, and has its absorption maximum at 513 nm. The molar absorptivity at 513 nm is 7.0 x 10(4)l.mole(-1).cm(-1). Beer's law is obeyed up to 22 mug of titanium in 30 ml of solution. The method has been used for the determination of titanium in an oxide mixture and aluminium alloy samples.     

Solvent extraction and spectrophotometric determination of titanium(IV) with 3-phenyl-3-methyl-2-mercaptopropenoic acid

The distribution equilibria of 3-phenyl-3-methyl-2-mercaptopropenoic acid (PhMMP) and the titanium(IV)-PhMMP complex have been studied. An extraction-photometric method for the determination of microamounts of titanium has been developed. We have investigated the influence of pH, the reagent, and the presence of electrolytes and masking agents in the aqueous phase on the equilibrium. From the slope analysis of the distribution curves the composition of the extracted species has been found to be Ti(OH)₂(HR)₂. The complex is extracted quantitatively. Beer's Law is followed over the range 0.09–3.74 μg ml^?1 of titanium(IV), the molar absorptivity is 1.65 × 10⁴ liters mol^?1 cm^?1, and the Sandell sensitivity is 2.8 ng cm^?2 at 439 nm. This method has been applied to the determination of titanium in a bauxite.     

Rapid extraction and spectrophotometric determination of vanadium(IV) with thiothenoyltrifluoroacetone

Thiothenoyltrifluoroacetone in carbon tetrachloride-butanol (1:1) is used for extraction and spectrophotometric determination of vanadium (IV) at pH 4.5-5. The greenish-yellow complex is measured spectrophotometrically at 450 nm. The system conforms to Beer's law over the range 2-11 mug/ml of extract. The colour of the complex is stable for at least 80 hr. Vanadium (IV) was quantitatively extracted and determined in the presence of 120:1 w/w ratios of various ions. The method was made selective by using common sequestering agents or prior extraction with tributyl phosphate, diethylammonium diethyldithiocarbamate, alpha-furildioxime or acetylacetone. The method is rapid, simple, selective and sensitive.     

Synergic extraction and spectrophotometric determination of vanadium(V) as ternary complexes with N-hydroxy-N-N'-diarylbenzamidines and anisaldehyde

N-Hydroxy-N,N'-diarylbenzamidines react with vanadium(V) in anisaldehyde medium to form 1:2:1 (metal:hydroxyamidine:anisaldehyde) greenish-blue complexes over a wide pH range in chloroform solution. On the basis of the strong synergistic effect in formation of these ternary complexes an extraction-photometric method for microgram amounts of vanadium(V) has been developed and applied to standard steel samples.     

Individual and sequential flow injection spectrophotometric determination of vanadium(V) and titanium(IV)

Summary Methods for the individual and sequential flow injection spectrophotometric determination of vanadium(V) and titanium(IV) are proposed, based on the formation of peroxo complexes. The detection limits are 1.0 × 10^–5 mol/l V (120 l) and 2.5 × 10^–6 mol/l Ti (80 l). A cation exchange resin mini-column is incorporated on-line into the vanadium manifold to remove the titanium complex and allow the vanadium to be determined selectively. A normal injection valve is used for the individual determinations, but it is modified for determination of V(V)/–Ti(IV) mixtures in order to introduce two samples sequentially into the reagent stream. One passes through a cation exchanger minicolumn, the other through an empty column, before reaching the detector. The former allows V alone to be measured, the latter V+Ti.

---

Individuelle und sequentielle spektralphotometrische Fließinjektionsbestimmung von Vanadium(V) und Titan(IV)

---

Dedicated to Prof. Dr. G. Tölg on the occasion of his 60th birthday     

Extraction of titanium(IV) gallate into tri-iso-octylam1ne and its spectrophotometric determination

Extraction of titanium(IV) gallate species into tri-iso-octylamine (TIOA) has been studied to develop a spectrophotometric method for the determination of titanium. The behaviour of common ions, under the conditions for quantitative extraction of titanium, is reported. Examples are given of application of the method to analysis of steels, reactor-grade thoria, and silicate rocks.     

Indirect spectrophotometric determination of cerium(IV)

A simple and very fast photometric method for the determination of trace levels of cerium(IV) has been developed. Use has been made of the reaction in which iron (II), on oxidation with cerium(IV), gives iron(III) which is complexed with tiron, in acidic medium, to form a stable blue color, the intensity of which is in direct proportion to the amount of cerium(IV) originally present in the sample solution. In addition, the method has a wide range of determination and reasonable sensitivity, and it avoids both temperature control and the tedious extraction step.     

Solvent extraction and spectrophotometric determination of uranium (VI)

Summary Solvent extraction of uranium-sodium diethyldithiocarbamate with ethylmethyl ketone and separation from titanium, zirconium, thorium, lanthanum and cerium has been described. It has been found that 11.75 to 47.00 mg of uranium can be extracted from a binary mixture containing 4.78 to 19.04 mg of titanium, 9.12 to 36.48 mg of zirconium, 116.0 to 460.0 mg of thorium, 6.95 to 27.8 mg of lanthanum or 7.06 to 28.24 mg of cerium at pH 3.0. The pH range between which the separations may be carried out successfully is 2.0 to 3.5. The following cations interfere in the separations: Cu^II, Fe^III, Co^II, Bi^III, Ni^II, Cr^VI, Te^IV, Se^IV, Ag^I, Hg^II, As^III, Sn^IV, Pb^IV, Cd^II, Mo^VI, Mn^II, V^V, Zn^II, In^III, Tl^I, W^VI, Os^VIII and Nb^V.

---

Zusammenfassung Uran kann durch Extraktion als Diäthyldithiocarbamidat mit Methyläthylketon von Ti, Zr, Th, La oder Ce getrennt werden. Der günstigste pH-Bereich liegt zwischen 2,0 und 3,5. Die Trennungen wurden mit folgenden Mengen durchgeführt: U (11,75–47,00 mg); Ti (4,78 bis 19,04 mg), Zr (9,12–36,48 mg) Th (116,0–460,0 mg), La (6,95–27,8 mg), Ce (7,06–28,24 mg). Folgende Ionen verursachen Störungen: Cu^II, Fe^III, Co^II, Bi^III, Ni^II, Cr^VI, Te^IV, Se^IV, Ag^I, Hg^II, As^III, Sn^IV, Pb^IV, Cd^II, Mo^VI, Mn^II, V^VI, Zn^II, In^III, Tl^I, W^VI, Os^VIII sowie Nb^V.

     

Synergetic extraction and spectrophotometric determination of gold(III)

Summary A method is described for the synergetic extraction and subsequent spectrophotometric determination of gold(III). The gold--furil dioxime-pyridine complex extracted into chloroform has a characteristic yellow colour with an absorption maximum at 330 nm. Beer's law is obeyed in the concentration range [Au(III)]45g/ 10 ml organic phase. A scheme to separate gold from interfering elements by extraction with 4-methyl-2-pentanol in benzene has been proposed.

---

Zusammenfassung Ein Verfahren zur synergetischen Extraktion und nachfolgenden spektrophotometrischen Bestimmung von Gold(III) wurde beschrieben. Die Komplexverbindung des Goldes mit-Furildioxim und Pyridin ist in chloroformischer Lösung gelb gefärbt. Ihr Absorptionsmaximum liegt bei 330 nm. Bis 45g Au(III)/10 ml organischer Phase wird das Beersche Gesetz befolgt. Die Trennung des Goldes von störenden Elementen durch Extraktion mit 4-Methyl-2-pentanol in Benzol wurde vorgeschlagen.

     

Synergistic extraction and spectrophotometric determination of plutonium(VI)

A rapid method for the synergistic extraction and spectrophotometric determination of plutonium(VI) in milligram amounts using a mixture of thenoyltrifluoroacetone (TTA) and tributyl phosphate (TBP) in benzene has been developed. Quantitative extraction is obtained from aqueous solutions of pH=2 affording separation from many commonly occurring impurities, viz., thorium, fission products and cladding materials. The precision and accuracy of the method has been found to be∼1%. The study of the solid product isolated from the extraction system indicates the stoichiometry of the extracted species as PuO₂(TTA)₂ TBP.     

2-(2-Thiazolylazo)-pcresol (TAC) as a reagent for the spectrophotometric determination of titanium (IV)

The reaction between titanium(IV) and 2-(2-thiazolylazo)-p-cresol-(TAC) in aqueous methanol media at apparent pH 4.0–5.6 results in a intensely coloured complex that is stable for at least 2 h. The combining ratio is 1 1 cation TAC. Beer's law is obeyed up to 5.0 g/ml titanium(IV) at 580 nm. The apparent molar absorptivity at 580 nm is 9.82.10³ l.mole^–1.cm^–1 and the detection limit obtained was 5 ng/ml titanium (IV). A spectrophotometric method for the simultaneous determination of titanium and iron with TAC is proposed.     

Extraction and spectrophotometric determination of titanium(IV) withN 1-hydroxy-N 1,N 2-diphenylbenzamidine and thiocyanate

A precise, reliable, sensitive, and selective method for the determination of titanium(IV) is described. Titanium(IV) reacts withN ¹-hydroxy-N ¹,N ²-diphenylbenzamidine (HDPBA) and thiocyanate to form an orange-coloured mixed-ligand complex of stoichiometry 112 (Ti SCN^– HDPBA). The complex is quantitatively extractable into toluene from 0.05–0.15M hydrochloric acid. The spectrum of the complex exhibits an absorption maximum at 400 nm with a molar absorptivity of 20000M ^–1 cm^–1 and the coloured system obeys Beer's law in the concentration range 0.20–3.0 gml^–1 titanium. The effects of foreign ions and of various experimental parameters have been studied to establish the optimum conditions for the extraction and determination of titanium. The precision of the method has been evaluated and the relative standard deviation has been found to be 0.53%. The method has been successfully applied to the determination of titanium in synthetic matrices corresponding to titanium-containing ores, minerals, and alloys.     

Solvent extraction and spectrophotometric determination of titanium (IV) with 3-phenyl-3-methyl-2-mercaptopropenoic acid by use of the synergistic effect of pyridine

Summary The distribution equilibria of 3-phenyl-3-methyl-2-mercaptopropenoic acid (PhMMP), pyridine and the titanium (IV)-PhMMP complex in the presence of pyridine have been studied in the chloroform-water system. An extraction-photometric method for the determination of micro amounts of titanium has been developed. The synergistic effect of pyridine, and the influence of pH, the reagent concentration and the presence of electrolytes and masking agents on the equilibrium have been determined. From slope analysis of the distribution curves, the composition of the extracted species has been found to be Ti(OH)₂(HR)₂·py. The complex is extracted quantitatively. Beer's law is obeyed over the range 0.09–4.30g/ml titanium (IV) and the molar absorptivity is 1.30×10⁴1·mole^–1·cm^–1 at 447 nm. The method has been applied to the determination of titanium in ceramics.

---

Über die Extraktion und spektrophotometrische Bestimmung von Titan(IV) mit 3-Phenyl-3-methyl-2-mercaptopropensäure mit Hilfe der synergistischen Wirkung des Pyridins

Zusammmenfassung Das Verteilungsgleichgewicht von 3-Phenyl-3-methyl-2-mercaptopropensäure (PhMMP), Pyridin und Titan-PhMMP-Komplex in Gegenwart von Pyridin wurde in einem Wasser-Chloroform-System untersucht. Eine extraktionsphotometrische Methode für die Bestimmung von Mikromengen Titan(IV) wurde ausgearbeitet. Die synergistische Wirkung des Pyridins sowie der Einfluß des pH, des Reagens und der Gegenwart von Elektrolyten und maskierenden Reagenzien in der wäßrigen Phase auf das Gleichgewicht wurden bestimmt. Aus der Richtung der Verteilungskurven wurde für den extrahierten Komplex die Zusammensetzung Ti(OH)₂(HR)₂·py ermittelt. Der Komplex wird quantitativ extrahiert. Das Beersche Gesetz ist von 0,09–4,30g·ml^–1 Ti(IV) erfüllt, der molare Absorptionskoeffizient ist 1,13·10⁴1·mol^–1·cm^–1; die Sandell-Empfindlichkeit beträgt 3,7ng·cm^–2 bei 447 nm. Diese Methode wurde für die Bestimmung von Titan in keramischem Material verwendet.

     

Catalytic spectrophotometric determination of trace amount of cerium(IV)

Based on a property that in dilute hydrochloric acid hydrogen peroxide oxidizes Ponceau S to fade and cerium(IV) has a catalytic effect on the reaction, a new spectrophotometric method was developed for the determination of trace cerium(IV). At 450 nm, the cerium(IV) concentration presents a good linear relationship over the range of 0.08?4 μg/mL with the fading degree ΔA. Its linear regression equation is ΔA = 0.0475c (μg/mL) + 0.0007, with a correlation coefficient of 0.9991. The detection limit of method is 0.05 μg/mL. The method has been successfully applied to the determination of cerium in water and molecular sieve samples with good results. The relative standard deviations of eleven determinations were 0.97?1.11 and 0.19?1.01%, respectively. The recoveries of standard additions were 99.4?99.9 and 99.2?101.0%, respectively. The reliability of this method was certified by parallel determination against the dibromo-p-chlorochlorophosphonazo spectrophotometry.     

Extraction and spectrophotometric determination of platinum(IV) using tetramethylthiuram disulfide

The extraction and photometric determination of platinum(IV) with tetramethylthiuram disulphide has been studied. Addition of an excess of stannous chloride and maintaining acidity to 2–6 M with HCl is necessary for quantitative extraction. With 10 ml of TMTD in toluene and equilibration for 30 sec, platinum is extracted as a pale yellow complex in the organic phase. It has λ_max at 348 nm and obeys Beer's law in the concentration range of 0.2 to 9.0 μg of Pt per ml. The complex is stable for 3 hr. The ratio of Pt:TMTD in the extracted species is found to be 1:1. Most of the anions and cations are tolerated in large ratio. The method can be satisfactorily applied for the determination of platinum in the presence of four- and eightfold excesses of ruthenium and osmium, respectively.     

Acenaphthenequinone monoxime(AQM) as a selective reagent for the spectrophotometric determination of platinum(IV) by solvent extraction

Acenaphthenequinone monoxime has been found to be a selective reagent for spectrophotometric determination of 1-16 ppm of platinum in the pH range 1.90-3.20. With excess of the reagent, a 1 : 2 (metal : ligand) complex is formed with an absorption maximum at 390 nm and molar absorptivity of 9.0 x 10(3) 1.mole(-1).cm(-1). The effect of foreign ions has been investigated and other platinum metals do not interfere if present in similar amounts to the platinum.