Extraction and spectrophotometric determination of Pd(II) with 3,4,4a,5-tetrahydro-3,3,4a-trimethyl-7-(substituted)-pyrimido(1,6-a)-benzimidazole-1-thiol (PBT)

A method for the extraction-spectrophotometric determination of palladium with 3,4,4a,5-tetrahydro-3,3,4a-trimethyl-7-(substituted)-pyrimido(1,6-a)benzimidazole-1-thiol (PBT) is described. PBT-Pd(II) complex is extracted from an acidic aqueous solution (0.01-0.5M HClO(4)) into a chloroform layer. The absorbance is measured at 438 nm and the molar absorptivity found to be 1.033 x 10(4)M(-1) cm(-1). The complex system conforms to Beer's law over the range 1.9-28.5 mug/ml palladium(II). The effects of pH (2-6), HClO(4) concentration, PBT concentration and shaking time were studied. The ratio of metal ion to ligand molecules in the coloured complex was found to be 1:4. The tolerance limit for many metals have been determined. Finally, the method has been applied successfully to the determination of palladium in synthetic mixtures and in the standard palladium carbon powder (palladium catalyst).     

Flotation-spectrophotometric method for determining palladium by means of the ion-association complex of pentabromopalladate(II) with Rhodamine 6G

The conditions for the formation of a suitable coloured palladium ion-association complex with a basic dye have been examined, and a spectrophotometric method developed for the determination of palladium with bromide and Rhodamine 6G (R6G). Benzene is used for flotation and dimethylformamide for dissolution of the ion-association complex. The molar absorptivity is 3.0 x 10(5) l. mole(-1).cm(-1) at 53Onm. Beer's law is obeyed up to a palladium concentration of 0.3 mug/ml. The composition of the complex is [R6G(+)](3)[PdBr(3-)(5)]. Platinum interferes severely but other platinum metals interfere to a lesser degree. The method has been applied to the determination of traces of palladium in metallic platinum after a preliminary separation with nickel dimethylglyoximate as collector.     

Zero-crossing second derivative spectrophotometry for simultaneous determination of palladium and nickel using 1-(2-pyridylazo)-2-naphthol in mixed micellar solutions

1-(2-Pyridylazo)-2-naphthol (PAN) has been used for the simultaneous determination of nickel and palladium at trace levels. PAN complexes of nickel and palladium in the pH 1.98 form red and green colored complexes, respectively, which are soluble in aqueous 4:1 Triton X-100 to sodium dodecylsulfate (SDS) micellar media with total detergent concentration of 3.2%. Under optimum conditions, calibration graphs for the simultaneous determination by second derivative spectrophotometry were obtained. Zero crossing second derivative spectrophotometry at 668 and 572 nm, respectively for palladium and nickel was used for the simultaneous determination. The method is able to determine palladium to nickel ratio 70:1 to 1:6 (Wt/Wt), accurately. Accuracy and reproducibility of the determination method on the known various amounts of palladium and nickel in their binary mixtures were tested. Effects of diverse ions on the determination of palladium and nickel to investigate selectivity of the method also were studied.     

Substoichiometric determination of traces of palladium by radioactive isotope-dilution analysis

A radioactive isotope-dilution method for the determination of traces of palladium has been developed. It is based on the solvent extraction of palladium dithizonate from acid solution by means of a substoichiometric amount of dithizone in carbon tetrachloride. The separation has been applied to the determination of traces of palladium in platinum, the rocks W-1 and PCC-1 and a biological material (kale). Amounts of palladium down to 3 ng have been determined.     

Synthesis of N-o-methylphenyl-N'-(sodium p-aminobenzene-sulfonate) thiourea and its chromogenic reaction with palladium(II).

A new chromogenic reagent, N-o-methylphenyl-N'-(sodium p-aminobenzenesulfonate)thiourea (MSAT), has been synthesized and characterized by elemental analysis, (1)H-NMR, FT-IR and UV-Vis spectra. Based on the absorption spectrum of the colored complex of MSAT with palladium(II), a novel spectrophotometric method for the determination of palladium has been developed. In a pH 4.0 - 5.5 HAc-NaAc buffer solution, palladium(II) reacted with MSAT to form a stable yellow water-soluble complex with an apparent molar absorptivity of epsilon = 2.04 x 10(5) L mol(-1) cm(-1) at the maximum absorption of 318.0 nm. Beer's law was obeyed in the concentration range of 1.2 - 11.8 microg per 25 mL for palladium(II) with a correlation coefficient of 0.9997. The probable interfering ions and their tolerable limits have also been investigated in detail. The proposed method is simple, rapid, and sensitive, and has been applied to the determination of palladium in anode mud and ore samples with satisfactory results.     

Spectrophotometric determination of palladium after solid-liquid extraction with 1-(2-Pyridylazo)-2-naphthol at 90 degrees C

An effective spectrophotometric determination of palladium with 1-(2-pyridylazo)-2-naphthol (PAN) using molten naphthalene as a diluent has been studied. A green complex of palladium with PAN is formed at 90 degrees C. In the range of pH 1.5-7.5, the complex is quantitatively extracted into molten naphthalene. The organic phase is anhydrously dissolved in CHCl(3) to be determined spectrophotometrically at 678 nm against the reagent blank. Beer's law is obeyed over the concentration range of 0.5-10 ppm. The molar absorptivity and Sandell's sensitivity are 1.2 x 10(4) l mol(-1) cm(-1) and 0.0070 mg cm(-2), respectively. The optimum conditions for determination are obtained. The interferences of various ions are observed in detail. The method has been applied to the determination of palladium in synthetic samples.     

催化动力学光度法测定痕量钯

在磷酸－磷酸二氢钾缓冲溶液中，以钯（Ⅱ）催化次磷酸钠还原罗丹明Ｂ褪色为指示反应，建立了痕量钯的动力学光度分析新方法。在金（Ⅱ）的存在下，检测下限达５×１０＾－１１ｇ／ｍＬ钯（Ⅲ），方法应用于模拟合金样和含钯分子筛中钯的测定。结果满意。     

H-Point Standard Addition Method for Simultaneous Determination of Palladium and Cobalt

The H-point standard addition method (HPSAM) has been applied to simultaneous determination of palladium and cobalt at trace levels, using 1-(2-pyridylazo)-2-naphthol (PAN) as a chromogenic reagent. Palladium and cobalt at neutral pH levels form green colored neutral complexes with PAN which are soluble in aqueous sodium dodecylsulfate (SDS) micellar media and can be monitored spectrophotometrically. Simultaneous determination of cobalt and palladium by HPSAM were performed spectrophotometrically and under optimum conditions. Absorbances at the two pairs of wavelengths, 597 and 650 nm or 566 and 612nm, were monitored while adding standard solutions of cobalt or palladium, respectively. The method is able to accurately determine a cobalt/palladium ratio of between 5:1 and 1:30 (wt/wt). The accuracy and reproducibility of the determination method for various known amounts of cobalt and palladium in their binary mixtures were evaluated. The effects of diverse ions on the determination of cobalt and palladium to investigate the selectivity of the method were also studied. The recommended procedure was applied to real water samples and synthetic sample solutions.     

Highly specific spectrophotometric method for palladium(II) determination with 3-(5'-tetrazolylazo)-2,6-Diaminotoluene in the presence of chlorides. Kinetic and equilibrium study of reactions

3-(5'-tetrazolylazo)-2,6-Diaminotoluene (TEADAT, H(3)L(2+)) forms stable 1:1 and 1:2 (metal:ligand) pink-red complexes (lambda(max) 506 and 536 nm) with palladium(II). The apparent molar absorptivity of 1:2 complex is 5.2 x 10(4) 1.mol(-1). cm(-1) at 536 nm. Equilibrium constants beta*(nl) for reactions PdCl(2-)(4) + nH(3)L(2+) right harpoon over left harpoonright harpoon over left harpoon PdCl(4-n) (H(2)L)(2n-2)(n) + n Cl(-) + n H(+) were determined: logbeta*(1) = 4.09 +/- 0.05, logbeta*(2) = 8.40 +/- 0.02, corresponding stability conditional constants of PdCl(3)(H(2)L) and PdCl(2)(H(2)L)(2+)(2) were log beta(1) = 19.03, log beta(2) = 26.74. The formation of complexes was rather slow but could be speeded up considerably by the catalytic effect of trace amounts of thiocyanate. Constant absorbance values were thus reached in 2-5 min. A rapid, sensitive and highly specific method for the determination of palladium(II) at pH 1.42 in 0.25M NACl has been worked out with a detection limit of 0.54 mug. Interference of precious and common metal ions have been studied and the method has been applied for the determination of palladium in Pd asbestos, oakay alloys and various catalysts and for the determination of palladium in precious metals.     

Substoichiometric determination of traces of palladium by neutron-activation analysis

A highly selective, rapid one-step radiochemical separation procedure for palladium has been developed. It is based on the solvent extraction of palladium diethyldithiocarbamate from a 5M hydrochloric acid solution with a substoichiometric amount of copper diethyldithiocarbamate in chloroform. The separation has been applied to the determination of traces of palladium by neutron-activation analysis, in platinum, the rocks W-1 and PCC-1 and a biological material (kale). Amounts of palladium down to 10(-8) g have been determined.     

Determination of palladium with thiocyanate and rhodamine b by a solvent-extraction method

Sensitive spectrophotometric and spectrofluorimetric procedures for the determination of palladium have been developed, based on solvent-extraction of the ion-pair formed between Rhodamine B and the anionic complex of Pd(II) with thiocyanate. With an organic to aqueous phase-volume ratio of 1:5, the molar absorptivity is 9.0 x 10(4) l.mole(-1).cm(-1) and the absorbance of the reagent blank is 0.026. Spectrophotometrically, palladium can be determined in the range 0.1-8.8 mug. Spectrofluorimetrically, it can be determined over the range 0.04-1.5 mug. The spectrophotometric procedure has been applied to the determination of palladium in dental alloys, organopalladium compounds and hydrogenation catalysts.     

Synthesis of 5-(5-nitro-2-pyridylazo)-2,4-diaminotoluene and its application to spectrophotometric determination of microamounts of palladium

A new pyridylazo reagent, 5-(5-nitro-2-pyridylazo)-2,4-diaminotoluene (5-NO(2)-PADAT) has been synthesized, and found to be a good chromogenic reagent for palladium. In sulfuric acid, hydrochloric acid and perchloric acid palladium reacts with 5-NO(2)-PADAT to form a 1:1 chelate, exhibiting an absorption maximum at 592 nm. The apparent molar absorptivity is 1.25 x 10(5) l(-1) mol(-1) cm(-1). Beer's law was obeyed in the range 0-0.9 microg ml(-1) Pd. Relatively large amounts of co-existing elements, including all other noble metals, can be tolerated. The method is simple and rapid, with high sensitivity and good selectivity and was applied to the determination of palladium in some industrial samples with satisfactory results.     

H-point standard addition method--first derivative spectrophotometry for simultaneous determination of palladium and cobalt

H-point standard addition method (HPSAM) has been applied for simultaneous determination of palladium and cobalt in trace levels, using disodium 1-nitroso-2-naphthol-3, 6-disulphonate (nitroso-R salt) as a selective chromogenic reagent. Palladium and cobalt in the neutral pHs form red color complexes with nitroso-R in aqueous solutions and making spectrophotometric monitoring possible. Simultaneous determination of palladium and cobalt were performed by HPSAM--first derivative spectrophotometry. First derivative signals at the two pairs of wavelengths, 523 and 589 nm or 513 and 554 nm were monitored with the addition of standard solutions of palladium or cobalt, respectively. The method is able to accurately determine palladium/cobalt ratio 1:10 to 15:1 (wt/wt). Accuracy and reproducibility of the determination method on the various amounts of palladium and cobalt known were evaluated in their binary mixtures. To investigate selectivity of the method and to ensure that no serious interferences were observed the effects of diverse ions on the determination of palladium and cobalt were also studied. The recommended procedure was successfully applied to real and synthetic cobalt or palladium alloys, B-complex ampoules, a palladium-charcoal mixture and real water matrices.     

Second and first-derivative spectrophotometry for efficient simultaneous and individual determination of palladium and cobalt using 1-(2-pyridylazo)-2-naphthol in sodium dodecylsulfate micellar media.

1-(2-Pyridylazo)-2-naphthol (PAN) has been used for the simultaneous and individual determination of palladium and cobalt at trace levels. PAN complexes of palladium and cobalt at neutral pH form green-color neutral complexes, which are soluble in aqueous SDS micellar media. Under optimum conditions, calibration graphs for individual determinations by zero and first-derivative spectrophotometry, and also for simultaneous determinations by second-derivative spectrophotometry were obtained. A zero-crossing method using second-derivative spectrophotometry at 628 or 578 and 614 nm, respectively, for cobalt and palladium was used for simultaneous determinations. The method is able to determine the cobalt-to-palladium ratio, 5:1 to 1:10 (Wt/Wt), accurately. The accuracy and reproducibility of the determination method for various known amounts of cobalt and palladium in their binary mixtures were tested. The effects of diverse ions on the determination of cobalt and palladium to investigate the selectivity of the method were also studied. The recommended procedures were applied to a synthetic binary alloy, cobalt in vitamin B12 and B-complex ampoules, a Co2O3-Co3O4 laboratorial chemical mixture, some synthetic cobalt-alloy samples, a Pd-charcoal catalyst, and some synthetic palladium alloys.     

Quinoline-2-aldehyde thiosemicarbazone (QAT) as spectrophotometric reagent for palladium and nickel

A procedure is described for the extractive spectrophotometric determination of nickel and palladium with quinoline-2-aldehyde thiosemicarbazone. At pH 7.5 nickel forms a 1:2 complex which is soluble in chloroform and has an absorption maximum at 460 nm. Palladium forms a 1:2 complex with maximum absorbance at 510 nm which can be extracted into MIBK from 1M HCl. Both complexes are stable and conform to Beer's law. The molar absorptivities for nickel and palladium are 1.58 x 10(4) and 2.6 x 10(3) 1.mole(-1). cm(-1) respectively. The proposed method is suitable for detection and determination of nickel and palladium in the presence of associated metal ions. The results of the analysis of synthetic mixtures and standard samples are reported.     

Stopped-flow injection liquid-liquid extraction spectrophotometric determination of palladium in airborne particulate matter and automobile catalysts

A stopped-flow injection liquid-liquid extraction (SF-EX-FIA) spectrophotometric method is reported for the determination of palladium(II), using the 2,2'-dipyridyl-2-pyridylhydrazone (DPPH) as a color forming reagent. The colored complex Pd(II)-DPPH was extracted in CHCl(3) and the absorbance was monitored at 560 nm. An injection valve was used as a commutator in order to combine the stopped-flow technique with liquid-liquid extraction FI system. The calibration graph was linear up to 12 mg l(-1) (s(r)=0.27%; r=0.9999) with a detection limit of c(L)=0.007 mg l(-1). The sampling rate was 20 injections per hour. The proposed method has been successfully applied to the determination of palladium in airborne particulate matter (APM) and in automobile exhaust gas converter catalysts.     

Amperometric titration of palladium, silver and copper with benzimidazol-2-ylmethanethiol, and its application to non-ferrous materials

A method is described for the determination of mg amounts of palladium, silver and copper by amperometric titration with benzimidazol-2-ylmethanethiol in acetate buifer medium (pH 4-5) at an applied potential of -0.2 V vs. the saturated calomel electrode. Direct titrations are possible in the presence of a number of foreign ions. Copper and palladium interfere mutually and in the determination of silver. Mercury(I), mercury(II) and platinum(IV) also interfere. Silver does not interfere in the determination of copper and palladium if it is first precipitated as chloride. The method has been successfully applied to the analysis of non-ferrous materials.     

5-（5-溴-2-吡啶偶氮）-2，4-二氨基甲苯催化光度法测定钯

在H2SO4介质和室温条件下,微量钯（Ⅱ）对KBrO3氧化5-（5-溴-2-吡啶偶氮）-2,4-二氨基甲苯（5-Br-PA—DAT）褪色反应具有显著的催化作用,据此建立了测定微量钯的催化光度法．方法的检测限为0．034mg／L,线性范围0．2～0．75mg／L．已用于钯碳催化剂及水样中钯含量的测定,标准加入回收率为97．2％～99．0％,结果满意．     

5-[(偶氮苯基)偶氮]-8-氨基喹啉的合成、性质及其应用的研究

本文报道了新试剂5-[(偶氮苯基)偶氯]-8氨基喹啉的合成方法。研究了该试剂的理化性质,分析性能及其与钯显色反应的条件。从而拟定了直接分光光度法测定微量钯的新方法,结果满意。     

Spectrophotometric Determination of Palladium by the New Chromogenic Reagent N-Butyl - N'-(Sodium P-Aminobenzenesulfonate) Thiourea

Abstract

A highly sensitive spectrophotometric method for determination of palladium by the new chromogenic reagent (BPT) has been developed. In the presence of cetyltrimethylammonium bromide(CTMAB), palladium reacts with BPT to form a stable yellow complex in HAc-NaAc buffer solution of pH 4.6-5.6 at 294.4 nm with a molar absorptivity of 2.46 x 10⁵ l mol^?1 cm^?1. The method is simple, rapid and sensitive. Trace amounts of palladium in mineral and catalyst samples have been satisfactorily determined by the method.