Spectrophotometric determination of antimony with vanillylfluorone in the presence of poly(vinyl alcohol)

Antimony in the range up to 2.5 mug/ml in the final solution is determined spectrophotometrically with vanillylfluorone in the presence of poly(vinyl alcohol) in acidic media. The method is compared with that using o-hydroxyhydroquinonephthalein (Qnph). It is simple, rapid and sensitive, without need for heating or solvent extraction, and the apparent molar absorptivity () is 5.0 x 10(4) 1.mole(-1).cm(-1) at 545 nm; for the Qnph method is 2.8 x 10(4) 1.mole(-1).cm(-1) at 520 nm. Tests with an artificial wastewater gave 99-103% recovery.     

Manual and fia methods for the determination of cadmium with malachite green and iodide

A sensitive and rapid spectrophotometric method for the determination of cadmium is described, based on the formation of a blue complex at pH 4 between the anionic iodide complex of cadmium(II) and Malachite Green; the colour is stabilized with poly(vinyl alcohol). The calibration graph for measurement at 685 nm is linear over the range 1-50 mug of cadmium per 25 ml of final solution, with a relative standard deviation of +/-1.7% for 1 mug/ml cadmium. The molar absorptivity is 6.1 x 10(4) 1.mole(-1).cm(-1). The method can be successfully adapted for FIA, the peak height being proportional to the cadmium concentration over the range 0.1-3 mug/ml; a two-channel manifold is used and an improvement in selectivity is obtained. The use of a gradient tube is demonstrated to give a good calibration for Cd(II) over the range 2 x 10(-2) -2 x 10(-6)M.     

Spectrophotometric determination of micro amounts of cadmium in waste water with cadion and triton X-100

A spectrophotometric method for determination of micro amounts of cadmium in waste water with Cadion and Triton X-100 is described. The interference of foreign ions can be eliminated by masking with an ascorbic acid-Rochelle salt-potassium cyanide-potassium fluoride mixture. After demasking with formalin, cadmium is determined directly in aqueous solution without separation. Beer's law is obeyed for 0-8 mug of Cd in 25 ml of solution. The method is more sensitive than the dithizone method, its apparent molar absorptivity at 480 nm being 1.19 x 10(5) 1. mole(-1). cm(-1). Results obtained by using the proposed method on waste water samples agree well with those obtained by atomic-absorption spectrophotometry.     

Spectrophotometric determination of zinc with hydrazidazol in the presence of Triton X-100 and its application in metal analysis

A new spectrophotometric method for the determination of zinc is proposed. The chromogenic agent Hydrazidazol forms a 1:1 chelate with zinc in the presence of Triton X-100 in a medium containing 20-40% ethanol. The molar absorptivity and conditional formation constant have been found to be 2.7 x 1O(4) l.mole(-1).cm(-1) (at 640 nm) and 10(5.32) respectively. Beer's law is obeyed for zinc over the range of 0.2-0.8 mug/ml with a standard deviation of 0.024 mug/ml. The method can be applied to the determination of zinc in cadmium metal and its oxide after preconcentration by selective extraction of zinc thiocyanate into ethyl acetate in the presence of EDTA and thiosulphate as masking agents.     

Extraction and spectrophotometric determination of titanium(IV) with malachite green and p-chloromandelic acid, with application to mild steels

A very sensitive, selective and simple method for extraction and spectrophotometric determination of titanium(IV) with an alpha-hydroxy acid has been developed. p-Chloromandelic acid reacts with titanium in weakly acidic aqueous solution at room temperature to form a complex anion extractable into chlorobenzene with Malachite Green as counter-ion. Titanium is determined indirectly by measuring the absorbance of Malachite Green in the extract at 630 nm. The calibration graph is linear for titanium(IV) over the range 0.25-7.5muM (0.05-1.44 mug); the apparent molar absorptivity is 1.31 x 10(5) l.mole(-1).cm(-1). The method has been successfully applied to the determination of titanium in mild steels.     

New reagent for spectrophotometric determination of salicylic acid

In 6M hydrochloric acid solution, salicylic acid reacts with pentachloronitrosyliridate [Ir(NO)Cl(5)](-) to form a new 1:1 complex giving two absorption maxima at 369 and 446 nm with molar absorptivities both of 1.1 x 10(4) l.mole(-1) cm(-). The reaction is second order with apparent energy, E(a), of 16.8 kJ/mole. At constant temperature, the apparent rate constant k increases to a maximum when the concentration of hydrogen ion is decreased to 4-5M and the concentration of chloride ion is kept at approximately 6M. The mechanism of the reaction is also discussed. In alkaline solution, the absorption maxima shift to 381 and 506 nm with molar absorptivities of 6.0 x 10(3) and 2.4 x 10(4) l.mole(-1) cm(-1), respectively. Salicylic acid can be determined spectrophotometrically with high sensitivity and precision. Benzoic and boric acids do not interfere.     

Spectrophotometric determination of chromium(III) and rhodium(III) after extraction with oxine into molten naphthalene

Conditions have been developed for the extraction of chromium(III) and rhodium(III) as their 8-hydroxyquinolinates into molten naphthalene. The naphthalene is allowed to solidify, separated by filtration, dried with filter paper and dissolved in chloroform. The solution is diluted to 10 ml and its absorbance measured at 410 nm for chromium and 425 nm for rhodium, against a reagent blank. In both cases the solution is stable for 24-36 hr. Beer's law is obeyed over the range of 2.7-48.6 mug of chromium or 2.7-57.5 mug of rhodium in 10 ml of the chloroform solution. The molar absorptivity is 3 x 10(3) l. mole(-1) . cm(-1) for chromium and 3.6 x 10(4) for rhodium. Solutions containing 27.0 mug of chromium or 10.95 mug of rhodium give a mean absorbance of 0.140 and 0.395 respectively, with standard deviations of 0.002(2) and 0.004(7). Most metal ions that form oxinates may interfere, but can be removed beforehand by normal liquid-liquid extraction.     

Extraction and spectrophotometric determination of molybdenum(VI) with Malachite Green and p-chloromandelic acid

Molybdenum(VI) reacts with p-chloromandelic acid to form a complex extractable into chlorobenzene with Malachite Green, from aqueous solution at pH 2.0-4.0 at room temperature, and can then be determined indirectly by measuring the absorbance of the Malachite Green in the extract, at 630 nm. The calibation graph is linear for molybdenum over the range 0.26-10.0 x 10(-6)M (0.10-4.0 mug); the apparent molar absorptivity is 1.06 x 10(5) l.mole(-1).cm(-1). The method has been applied to the determination of molybdenum in mild steels with satisfactory results.     

Characterization and analytical application of the ion-association complex crystal violet-cadmium bromopyrogallol red

In the presence of polyvinylalcohol (PVA-124) and polyethylene glycol monooctylphenyl ether (emulsifier OP), cadmium ions(II) can form a colour ion-association complex with both Bromopyrogallol Red (BPR) and Crystal Violet (CV). In the NH(3)NH(4)Cl medium, the ion-association complex has a composition of Cd:BPR:CV = 1:1:2, and its corresponding molecular formula is [CV](2)[Cd(BPR)]. The maximum absorption of the colour complex is located at 654 nm with an apparent molar absorptivity of 1.79 x 10(5) l.mole(-1).cm(-1). Beer's law is obeyed for cadmium over the range 0-10 mug/25 ml. A highly sensitive spectrophotometric method for trace cadmium in water and zinc was developed with good precision and accuracy. The mechanism of the reaction is also discussed.     

Extraction and photometric determination of lead with diazacrown ether dye

N,N'-Bis(2-hydroxy-5-nitrobenzyl)cryptand-22 (22-Koshland) forms yellow complexes with bivalent metal ions, and these are extractable into 1,2-dichloroethane. The overall extraction constants have been estimated for lead (10(-5.4)), copper (10(-5.6)), mercury (10(-5.8)) and cadmium (10(-8.4)). The result obtained has been applied to extraction and photometric determination of lead. The molar absorptivity at the absorption maximum (406 nm) is 4.47 x 10(4) l.mole(-1).cm(-1). The interferences from copper and mercury can be eliminated by the addition of sodium thiosulphate and the interference from cadmium can be eliminated by calculation from the absorbances at 406 and 391 nm (the cadmium complex with 22-Koshland has its absorption maximum at 391 nm). The method has been successfully applied to the determination of lead in zinc powder.     

Spectrophotometric determination of gallium(III) with phenylfluorone in the presence of hexadecylpyridinium bromide and pyridine

Phenylfluorone reacts with gallium in the presence of hexadecylpyridinium bromide and pyridine to form a water-soluble chelate with an absorption maximum at 570 nm and constant absorbance in the pH range 4.0-5.5. At this wavelength, Beer's law is obeyed up to 4.3 x 10(-6)M gallium. The sensitivity is very high and the molar absorptivity is 1.48 x 10(5) 1.mole(-1).cm(-1). The chelate has been utilized in the determination of gallium at the mug level. The ratio of gallium to phenylfluorone in the complex is 1:2.     

A highly sensitive spectrophotometric method for determination of micro amounts of arsenic

A highly sensitive spectrophotometric method for determination of arsenic, based on the formation of an ion-association complex between arsenoantimonomolybdenum blue and Malachite Green, has been developed. The ion-association complex is soluble in the presence of Triton X-305, so arsenic can be determined directly in aqueous solution. The apparent molar absorptivity for arsenic is 1.13 x 10(5) l.mole(-1).cm(-1) at 640 nm. Beer's law is obeyed for 0-5 mug of arsenic. The lower limit of determination (absorbance = 0.01) is 4 ng ml in the final solution.     

Spectrophotometric determination of chloride in PtAl(2)O(3)/SiO(2) catalysts with Hg(SCN)(2)Fe(3+) reagent

A method is described for the determination of chloride in PtAl(2)O(3)/SiO(2) catalysts, based on its extraction with alkali followed by reaction with Hg(SCN)(2)Fe(3+) reagent and spectrophotometric measurement at 460 nm. Beer's law is obeyed in the concentration range 5-75 mug of chloride in 25 ml of aqueous solution. The molar absorptivity is 1.99 x 10(3) l.mole(-1).cm(-1). The rapid colour development, excellent reproducibility and absence of interference from the species most often present in the catalysts are the advantages of the method.     

Extractive-spectrophotometric determination of molybdenum as mixed-ligand complexes with thiocyanate and amidopyridines

A fairly selective and sensitive method is described for the determination of microgram amounts of molybdenum(V) by means of its reaction with thiocyanate and the enolic form of various amidopyridines and extraction into benzene. The molar absorptivity of the complexes is in the range 1.5-1.9 x 10(4) l.mole(-1).cm(-1) at lambda(max) 470 nm. The method is applicable in 1.5-7M hydrochloric acid or 1.2-6(M) sulphuric acid media. Cu(+), Co(2+), Mn(2+), Zn(2+), Ni(2+), Cd(2+), Fe(3+), Al(3+), Cr(3+), Ti(4+), Zr(4+), V(V), Nb(5+), Ta(5+), W(VI) and U(VI) do not interfere.     

Colour reaction of platinum(II) with 5-(4-nitrophenylazo)-8-(p-toluenesulphonamido)-quinoline and its analytical applications

A simple, rapid and sensitive spectrophotometric method has been developed for the determination of platinum. 5-(4-Nitrophenylazo)-8-(p-toluenesulphonamido)quinoline (NPTSQ) reacts with platinum(II) almost instantaneously in alkaline solution to form a violet-red 1:2 complex with an absorption maximum at 640 nm. Beer's law is obeyed over the concentration range 0-1 mug/ml platinum. The molar absorptivity is 1.37 x 10(5) 1.mole(-1).cm(-1). The method has been used for the determination of microamounts of platinum in catalysts and anode slime.     

Spectrophotometric determination of gallium in alloys and fly-ash with pyridoxal derivatives of thiocarbohydrazide and carbohydrazide

The symmetric derivatives of pyridoxal with thiocarbohydrazide and carbohydrazide, and the asymmetric derivatives of pyridoxal and salicylaldehyde with the same hydrazides have been synthesized and their analytical potential for spectrophotometric and kinetic fluorimetric determination of metal ions was studied. Gallium(III) and PyMAU(1,3-bis{[4-(2-methyl-3-hydroxy-5-hydroxymethyl)pyridyl]methyleneaminourea at pH = 4.2 form a complex with a single absorption maximum at 425 nm, which can be extracted into cyclohexanone in the presence of a controlled amount of sodium perchlorate. The extract has maximum absorbance at 435 nm. Both systems can be used for determining gallium. The optimal range of gallium concentration for measurement in a 1-cm cell is 0.5-1.25 gmg/ml for the procedure in homogeneous medium ((425) = 3.76 x 10(4).mole(-1).cm(-1)) and 0.25-1.25 mug/ml for the extraction procedure ((435) = 5.30 x 10(4) 1.mole(-1).cm(-1). The latter procedure has been applied to the determination of gallium in alloys and fly-ash.     

Spectrophotometric determination of microamounts of scandium with o-chlorophenylfluorone and cetyltrimethylammonium bromide

The reaction of scandium(III) with o-chlorophenylfluorone (o-CIPF) in the presence of cetyltrimethylammonium bromide (CTMAB) has been studied. In an acetate buffer at pH 4.4, a red-purple complex is obtained, with maximum absorption at 569 nm and a molar absorptivity of 1.31 x 10(5)1.mole(-1).cm(-1). The composition of the complex is found to be 1:2:2 Sc-o-CIPF-CTMAB. Beer's law is obeyed over the range 0-12 mug/25 ml scandium. The proposed method has been used for determination of trace scandium in tungsten ores after its prior separation by solvent extraction.     

Flow-injection spectrophotometric determination of cadmium with quinolylazo compound after on-line separation using a silica gel column

2-[2-(4-Methylquinolyl)azo]-5-diethylaminophenol(QADP) reacts with cadmium in aqueous ethanol and the molar absorptivity of the QADP-cadmium complex is the highest (1.51 x 1O(5)M(-1) cm(-1), gamma(max) 569 nm) of the reagents reported previously. A flow-injection spectrophotometric determination of cadmium with QADP after on-line separation using silica gel column was proposed. A 450 mug/l cadmium concentration could be determined in the presence of 13 mg/l zinc, 83 mg/l lead and 11 mg/l iron.     

Neotetrazolium chloride: a new reagent for spectrophotometric determination of manganese

The interaction of Mn(VII) and the Neotetrazolium chloride has been examined. The ion-associate formed is extracted into 1,2di-chloroethane. The optimum conditions have been established. The molar absorptivity of the complex is (9.1+/-0.08)x10(5) l mol(-1) cm(-1). The sensitivity of the method is 6.04x1010(-5) mug cm(-2). It is possible to extract and determine manganese in the presence of large number of cations and anions. The characteristic values for the extraction and the aqueous phase equilibria were determined: extraction constant K(ex)=3.21x10(9), distribution constant K(D)=33 and association constant beta=9.72x10(7). The method is applicable to analysis of soils and steels.     

Spectrophotometr1c determination of cadmium with 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol

The reaction between cadmium and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl DMPAP) in aqueous alcohol media at pH 8.8-10.7 results in an intense violet colour which is stable for at least 8 hr. The composition is 2:1 reagent:metal and the formation constant (5.29 +/- 0.01) x 10(18). Beer's law is obeyed up to 1.34 ppm of cadmium at 550 nm. The optimal concentration range (Ringbom) is between 0.16 and 0.72 ppm. The apparent molar absorptivity at 550 nm is (1.20 +/- 0.01) x 10(5) l.mole(-1). cm(-1), making the sensitivity one of the highest known. The interference due to copper(III), iron(III), cobalt(II), nickel(II), gold(III), zinc(II) and manganese(II) can be suppressed.