Fluorimetric determination traces of aluminium in soil extracts

Salicylaldehyde picolinoylhydrazone (SAPH) form a fluorescent complex with aluminium (lambda(ex) = 384 nm, lambda(em) = 468 nm) in acidic medium (stoichiometry 1:3, Al:SAPH). Two procedures based on the direct or standard additions methods has been proposed for the determination of concentrations down to 1-2 mug/dm(3) of Al(III). The effects of 72 ions in the method has been evaluated and different masking agent reactions have been tested. The method has been used satisfactorily for the determination of aluminium at a level of mug/dm(3) in acetate extracts of several agricultural soils. The method has been compared favourably with ICP spectroscopy emission.     

Simultaneous determination of codeine and pyridoxine in pharmaceutical preparations by first-derivative spectrofluorimetry

A method for the simultaneous determination of codeine and pyridoxine was developed, based on the measurement of their native fluorescence signals, by using first-derivative spectrofluorimetry to resolve the mixture. Codeine was measured at lambda(em) = 309 nm, and pyridoxine was measured at lambda(em) = 450 nm. Instrumental parameters were optimized, and the emission spectra were recorded between 275 and 475 nm, at lambda(ex) = 255 nm and excitation and emission slit widths of 2.5 and 10 nm, respectively. Systematic studies on the influence of species usually present along with the analytes (such as caffeine, ascorbic acid, paracetamol, and thiamine) were also performed. The calibration graphs were linear over the ranges of 0.5-7.0 and 0.1-1.0 microg/mL for codeine and pyridoxine, respectively, and the relative standard deviations (n = 10) were about 3%. The method was successfully applied to the determination of codeine and pyridoxine in solutions of synthetic mixtures and in synthetic and semisynthetic pharmaceutical formulations.     

Fluorimetric determination of beryllium with pyridoxal-5-phosphate

A simple, rapid and selective method for the determination of beryllium with pyridoxal-5-phosphate has been developed. The system is only fluorescent (lambda(ex) 360, lambda(em) 460 nm) in the presence of a nitrogenous base such as ammonia, ethylenediamine or pyridine, owing to the possible formation of a ternary complex. The calibration graph is linear over the range 8-60 ng ml . The high selectivity of the method permits the determination of beryllium in various types of alloys.     

Di-2-pyridyl ketone 2-furoylhydrazone as a reagent for the fluorimetric determination of low concentrations of aluminium

The synthesis and properties of di-2-pyridyl ketone 2-furoylhydrazone as an analytical reagent are described. A rapid procedure for the fluorimetric determination of aluminium at the 10-100 ng ml level, at pH 6.1-6.5 (lambda(exc) 395 nm, lambda(em) 465 nm) has been established. Interferences have been evaluated, and the procedure has been applied satisfactorily to determination of aluminium in sea-water.     

High performance liquid chromatographic determination of aluminium in natural waters in the form of its lumogallion chelate

A high performance liquid chromatographic method for the determination of ultra trace amount of aluminium in natural waters has been developed using lumogallion as a precolumn reagent for fluorimetric detection. The highly fluorescent Al-lumogallion chelate (lambda(ex) 500 nm, lambda(em) 574 nm) was separated on a LiChrosorb RP 18 column with an eluent containing 3:7 acetonitrile/0.02M potassium hydrogen phthalate buffer (pH 4.7) containing 10(-5)M lumogallion. The proposed system provides a simple, quick, selective and sensitive method for the determination of ultra-trace amount of aluminium in water samples. The detection limit defined as three times the standard deviation of the blank signal, was 0.05 mug/l. in water samples for 100 mul injection. The tolerance limits were 5 mg/l. for Fe(III) and F(-) and over 10 mg/l. for other foreign ions. The sensitivity of the method was independent of salinity. This method had been used for the direct determination of aluminium in both tap and coastal sea-waters without any preconcentration steps.     

Nonextractive spectrofluorimetric determination of aluminium in real, environmental and biological samples using chromotropic acid

An ultra-sensitive and highly selective nonextractive fluorimetric method is presented for the rapid determination of aluminium at nano-trace levels using chromotropic acid as a fluorimetric reagent [lambda(ex) = 360 nm and lambda(em) = 390 nm] in the pH range of 4.1-4.7. The fluorescence intensity of the metal chelate (2:3 complex) reaches a constant value within 1/2 hr and remains unchanged for over 48 hr. The fluorescence intensity aluminium concentration calibration curve is collinear between 1 and 300 ng/ml of Al. A constant fluorescence intensity is obtained over a wide range (1:50-1:1500) of Al:reagent molar concentrations. Large excesses of over 60 cations, anions and complexing agents (like tartrate, oxalate, phosphate, thio-urea, SCN(-), etc.) do not interfere in the Al determination. The developed method was successfully used in assaying aluminium in several standard reference materials (Al-bronze, brass, stainless steel) as well as in some environmental and biological samples. The method is very precise and accurate (S.D = +/-0.001 on 10 ng/ml; 11 determinations).     

Simultaneous determination of beryllium and aluminium in mixtures using derivative spectrophotometry

The spectrophotometric determination of beryllium and aluminium with 5,8-dihydroxy-1,4-naphthoquinone in the presence of a non-ionic surfactant is reported. Absorption maxima, molar absorptivity and Sandell's Sensitivity of 1:2 (M:L) beryllium and aluminium complexes are, 585 nm and 598 nm, 1.63 x 10(4) l.mole(-1).cm(-1) and 2.04 x 10(4) l.mole(-1).cm(-1), and 0.55 ng/cm(2) and 1.32 ng/cm(2) respectively. Beer's law is obeyed between 7.20-3.96 x 10(2) ng/ml beryllium and 1.08 x 10(1)-1.08 x 10(3) ng/ml aluminium. A method for simultaneous determination of beryllium and aluminium in their mixture using derivative spectra is described. The range 3.6 x 10(1)-3.6 x 10(2) ng/ml beryllium could be determined in the presence of 1.08 x 10(2)-1.08 x 10(3) ng/ml aluminium, and vice versa.     

Determination of traces of aluminium with chrome azurol S by solid-phase spectrophotometry

A microdetermination method at sub-mug/1. level for aluminium by solid-phase spectrophotometry has been developed. Chrome azurol S was used as chromogenic reagent to form a blue complex which was easily and strongly sorbed and concentrated on a dextran-type anion-exchange resin. The resin-phase absorbances at 615 and 800 nm were measured directly. Aluminium can be determined in the 0.6-4.0 mug/1. range with a RSD of 2.1%. The method is applied to the determination of aluminium in micaschist, natural and tap water samples.     

Direct determination of salicylamide in serum by matrix isopotential synchronous fluorimetry

A method for the determination of salicylamide at concentrations between 25 and 350 ng ml(-1) by use of matrix isopotential synchronous fluorescence spectrometry (MISF) in combination with derivative techniques is proposed. The method allows the determination of compounds in samples with unknown background fluorescence without the need for tedious pre-separation. Synchronous scans are performed along a trajectory that connects points of identical intensity in a three-dimensional fluorescence spectrum. The unknown analytical signal of the serum is suppressed from the MISF spectrum, by calculating its first derivative at lambda(exc)=324 nm and lambda(em)=392 nm. In order to ensure maximum sensitivity and adequate selectivity, the experimental variables affecting the fluorescence intensity of the salicylamide band at lambda(exc)=328 nm and lambda(em)=418 nm were studied. Based on the results, the determination was performed in an aqueous medium at pH 12 that was adjusted with a sodium phosphate/hydrogen phosphate buffer. Calibration graphs were subjected to a comprehensive statistical analysis. The error propagation has been considered in order to calculate the detection limit by the criterium of Clayton.     

HPLC-fluorescence determination of equilin and equilenin in postmenopausal women's urine

A high-performance liquid chromatographic (HPLC) method with fluorescence detection (lambda(ex) = 280 nm; lambda(em) = 410 and 312 nm) in combination with a post-column on-line photochemical derivatization is described for the determination of equilin and equilenin in urine from normal postmenopausal women after therapy with conjugated oestrogens. The column effluents were subjected on-line to UV irradiation (254 nm) and the photo-induced modifications were useful for the identification of the analytes. The conjugated (sulphate and glucuronide) forms were analysed after enzymatic or chemical hydrolysis and extracted with chloroform. Solid-phase extraction using strong anion-exchange sorbent was applied to the analysis of unconjugated oestrogen fraction to obtain a practical and reliable sample clean-up. The HPLC separations were achieved using ODS columns with a mobile phase consisting of 0.05 M triethylamine phosphate buffer (pH 4.0)-acetonitrile (64:36, v/v) at a flow rate of 1.0 mL/min. The method was accurate and reproducible; for the equilin and equilenin separation isocratic conditions were satisfactory, allowing a sensitive detection in urine samples with a detection limit of about 50 fmol for equilin (lambda(ex) = 280 nm; lambda(em) = 312 nm, after photoderivatization) and 10 fmol for equilenin (lambda(ex) = 280 nm; lambda(em) = 410 nm).     

Resin phase spectrophotometry of beryllium by an optical fiber and beryllon II

We have developed a resin phase spectrophotometric method to determine the amount of beryllium by detecting a change in absorbance of the resin phase. 8-Hydroxynaphthalene-3,6-disulphonic acid-(1-azo-2')-1',8'-dihydroxynaphthalene-3',6'-disulphonic acid tetrasodium salt (beryllon II) immobilized by a strong base anion-exchange resin on the end of a bifurcated optical fiber bundle was chosen as a material sensitive to beryllium. Experiments were made using a home-made optical fiber spectrophotometer. The properties of the resin phase proved to be good for continual use of 350 times during a month. The reaction order between immobilized beryllon II and beryllium in solution was determined by kinetic theory and experiments. This method was also used to determine the amount of beryllium in beryllium-copper alloy; the response was linear from 0.43 to 2.60 mug/ml at pH 12.5 and 676 nm. The effect of interfering ions on the determination of beryllium was studied at the same time.     

Enhancement of the fluorescence of the beryllium-morin complex by non-ionic surfactants

The effect of surfactants on the fluorescence of the beryllium-morin system has been studied. Non-ionic surfactants strongly enhance the fluorescence intensity of the beryllium complex. The addition of Triton X-100 makes possible the fluorimetric determination of submicrogram quantities of beryllium in feebly acidic media (pH 5.8-6.2, hexamine buffer). The fluorescence is excited at 440 nm and measured at 530 nm. The calibration graph is linear up to 10 ng/ml Be and the detection limit is 0.04 ng/ml. The relative standard deviation is 2.2% for beryllium at 0.5 ng/ml concentration and 0.7% for 5.0 ng/ml. The effects of 25 ions commonly found in water have also been studied; Zn(2+) and F(-) give the main interference. The method has been applied to the determination of beryllium in water pollution quality-control samples with satisfactory results.     

On-line aluminium preconcentration on chelating resin and its FIA-spectrofluorimetric determination in foods and dialysis concentrates

A new, sensitive and rapid spectrofluorimetric flow-injection method, is presented for the determination of trace levels of aluminium based on the formation of a fluorescent complex between aluminium and 5,7-dibromo-8-quinolinol (DBQ) and its extraction into diethylether (λ_exc = 400 nm, λ_em = 525 nm). Experimental conditions such as pH, reagent concentration, flow-rates, sample volume, extraction coil length, etc., have been optimized for on-line and batch procedures. The detection limits are 1 ppb and 0.3 ppb for batch and on-line systems respectively. The coeflicient of variation is 3.0% at the 4 ppb level for the FIA system. To remove interferences and to preconcentrate aluminium, a chelating resin microcolumn which was able to selectively complex A1(III) and was obtained by immobilizing Chromotrope 2B on AG1-X8 ion-exchange resin, was incorporated into the FIA system. The proposed method was successfully applied to determine aluminium in tap water, food samples and dialysis solutions.     

Resonance light scattering method for the determination of anionic surfactant with acridine orange

The resonance Rayleigh scattering (RRS), second-order scattering (SOS) and frequency-double scattering (FDS) spectra of sodium dodecylbenzene sulfonate (SDBS) (anionic surfactant (AS)) with acridine orange (AO) system were studied. Experimental results showed that when lambda(em) = lambda(ex) = 537 nm, the RRS peak of AO was greatly enhanced with the increase of SDBS concentration at a pH range of 1.8-4.0. The linear range of the calibration curve for SDBS was 0.028-8.71 mg L(-1) with a detection limit of 8.36 microg L(-1) when the AO concentration was 2.5 x 10(-5)mol L(-1). The method has been applied to the determination of trace amount of AS in environmental water samples with satisfactory results. In addition, when lambda(em) = 321 nm and lambda(ex) = 642 nm, the intensity of FDS was proportional to the SDBS concentration ranging from 0.014 to 8.71 mg L(-1) and the correlation coefficient was 0.993 with a detection limit of 4.31 microg L(-1); when lambda(em) = 642 nm and lambda(ex) = 321 nm, the intensity of SOS was proportional to the SDBS concentration ranging from 0.050 to 8.71 mg L(-1), and the correlation coefficient was 0.993 with a detection limit of 14.9 microg L(-1).     

Rapid assay for procaine penicillin G in pharmaceutical dosages by spectrofluorimetry

A method for the spectrofluorimetric determination of procaine penicillin G is proposed (lambda(ex) = 294 nm, lambda(em) = 348 nm) for concentrations between 0.10 and 1.0 ppm. The method was performed in ethanol/water medium (60% V/V), at apparent pH 9.9 provided by adding ammonium/ammonia buffer solution with pH = 10.0. The effect of other penicillins on the determination of procaine penicillin G was examined over a wide range of concentrations, interferences were not observed in the range of studied concentrations. The method was successfully applied to assay all Spanish commercialized injections containing procaine penicillin G, penicillin G and/or benzathine penicillin G.     

药用植物铃兰中吖丁啶-2-羧酸的测定

使用强阳离子交换柱分离、pH梯度洗脱、柱后衍生、荧光λex＝338nm和λem＝425nm检测的高效液相色谱法,成功地分析了药用植物铃兰中的吖丁啶－2－羧酸,方法回收率为96．4％。     

Chromotropic acid as fluorogenic reagent. I. Fluorimetric determination of beryllium

A highly sensitive and almost specific fluorimetric method has been developed for rapid determination of beryllium at ng/ml and sub-ng/ml levels with chromotropic acid as reagent at pH 4.8–6.0. The fluorescence intensity _ex = 362 nm, _em = 387 nm) is stable for 24 h. The calibration graph is linear over the range 0.1–60 ng/ml beryllium; a 1 1 complex is formed. Over sixty anions and cations, and some complexing agents such as EDTA, oxalate, tartrate, ascorbic acid, thiourea, phthalate, citrate, S₂O ₃ ^2– , SCN^– and salicylate do not interfere even when present in large excess. The method has been applied successfully for the determination of beryllium in ores, alloys, steels, environmental waters and in biological samples. The method is virtually specific and requires no preconcentration or clean-up steps.     

高效液相色谱法测定南瓜粉中的4-氨基丁酸

 采用强阳离子交换柱分离 ,pH梯度洗脱 ,邻苯二甲醛 (OPA)柱后衍生 ,荧光λex=338nm ,λem=42 5nm检测的高效液相色谱法测定了南瓜粉中的 4 氨基丁酸 (GABA)。若以GABA的峰高Y(μV)对进样质量X(μg)进行线性回归 ,则线性方程为Y =45 6 6X +1396 ,r =0 9998;GABA的平均回收率 (n =3)为 99%。方法稳定、快速、灵敏、准确。     

Determination of vitamin B12 in pharmaceutical preparations by a highly sensitive fluorimetric method

A fluorimetric method for the determination of vitamin B12 has been developed. The fluorescence emission was measured at lambda(ex)/lambda(em)275/305 nm in phosphate buffer solution (pH 7.0), and the experimental variables and possible interference were studied. The linear calibration range was 1.000 ng/mL to 100.0 ng/mL with a correlation coefficient of 0.9994 and a detection limit of 0.1 ng/mL. The method is rapid, simple and highly sensitive. It was used to determine vitamin B12 in pharmaceutical preparations. The recovery was 96%-98% and the relative standard deviation was in the range of 1.8%-2.7%. The results agreed with those obtained by spectrophotometry.     

The determination of aluminium by the ammonium benzoate method : An investigation into factors affecting the separation and estimation of aluminium and beryllium

An investigation has been made into the separation of aluminium from beryllium by the ammonium benzoate method. It has been shown (a) that over a wide range of concentrations aluminium can be determined with a maximum error of 2 %, (b) that the beryllium can be estimated after the removal of the aluminium with an error of not more than 2 % if the proportion of alumina, to beryllia is not more than 1 : 1. If the proportion of alumina to beryllia is greater than 1 : 1 considerable inaccuracy in the beryllium determination will result due to the co-precipitation of the beryllium with the aluminium benzoate; (c) that a double precipitation is required to obtain a satisfactory separation of aluminium and beryllium, (d) that although KoLTOFF el al. reported partial precipitation of beryllium with ammonium benzoate, this does not occur if tlie PH is carefully controlled between 3.5–4.0, and (e) it has been confirmed that ammonium benzoate precipitates aluminium quantitatively at PH 3.5ú4.0 wlilst beryllium does not commence to precipitate until about PH 6.5.