Kinetic determination of tellurium based on its inhibitory effect on the palladium(II)-catalysed reaction between pyronine G and hypophosphite ion

A kinetic method for the determination of Te based on its inhibitory effect on the PdII-catalysed reaction between pyronine G and H2PO2- is described. The influence of experimental variables on the rate of the process and the potential interfering effect of a large number of ions has been studied. Under the selected experimental conditions: 6 x 10(-5) M pyronine G; 0.6 M H2PO2-; pH 2.6, adjusted with Britton-Robinson buffer; 0.80 microgram ml-1 of PdII; and a temperature of 22 +/- 0.2 degrees C, Te was determined in the concentration range 0.08-0.85 microgram ml-1. The method was applied to the determination of Te in waters and lead concentrates.     

Sequential homobimetallic catalysis: an unprecedented tandem Pd(0)-catalysed deprotection - Pd(II)-catalysed heterocyclisation reaction leading to benzofurans

We report here the first example of "sequential homobimetallic catalysis": a transition metal catalyst with the metal in a certain oxidation state catalyses the deprotection of a functional group, which in situ undergoes a subsequent transformation catalysed by another complex of the same metal but in a different oxidation state.     

Kinetic spectrofluorimetric determination of trace ascorbic acid based on its inhibition on the oxidation of pyronine Y by nitrite

A highly sensitive spectrofluorimetric method is proposed for the determination of trace amount of ascorbic acid using a new indication. The method is based on the inhibition of ascorbic acid on the oxidation of pyronine Y (PRY) by nitrite. The detection limit for ascorbic acid is 0.012 microg ml(-1), the linear range of the determination is 0.02-0.36 microg ml(-1). Analytical parameters, such as reagent concentration, pH, reaction temperature and time, were optimized. The relative standard deviations of eleven replication determinations of 0.12 and 0.24 microg ml(-1) ascorbic acid were 1.4 and 0.72%, respectively. This method has been used to determine ascorbic acid in pharmaceuticals, vegetables, fruits and soft drink with satisfactory results.     

Kinetic determination of Hg(II) based on its accelerating effect on the reaction between hexacyanoferrate(II) and 1,10-phenanthroline catalysed by micelles

A kinetic-photometric method for the determination of Hg(II) over the range 10-80 ng/ml is proposed. It is based on the accelerating effect of this ion on the reaction between hexacyanoferrate(II) and 1,10-phenanthroline which is monitored via the ferroin complex formed. Anionic sodium dodecyl sulphate (SDS) micelles, which catalyse the reaction, allow the ferroin complex to be formed under more acidic conditions. Combination of this pH shift and the development of the reaction in the vicinity of micelles results in improved selectivity in the determination of Hg(II) compared to the reaction occurring in an aqueous medium. Some observations on the effect of SDS on the reaction are reported.     

Kinetic determination of cysteine and thiosulphate by inhibition of Hg(II) catalyzed ligand substitution reaction

The sulphur containing inhibitors (I), cysteine (Cys) and sodium thiosulphate (THS), have been found to inhibit Hg(II) catalyzed exchange of cyanide in hexacyanoferrate(II) by nitroso-R-salt (NRS). The inhibitory effect of both the ligands are attributed to their binding tendencies with Hg(II) leading to the formation of catalyst-inhibitor (C-I) complex. The reactions have been followed spectrophotometrically in aqueous medium at 720 nm by noting the increase in absorbance of the green colour product, [Fe(CN)₅NRS]³⁻ at pH 6.50 ± 0.02, temp 25.0 ± 0.1 °C and ionic strength (μ) 0.1 M (KNO₃). A most plausible mechanistic scheme involving the role of analytes (inhibitors) has been proposed. The values of equilibrium constants for complex formation between catalyst-inhibitor (K_CI), catalyst-substrate (K_S) and Mechaelis-Menton constant (K_m) have been computed from the kinetic data. The linear calibration curves have been established between absorbance and inhibitor concentrations under specified conditions. Cys and THS have been determined in the range 1-5 × 10^− 7 M and 4.9-16.9 × 10^− 7 M respectively. The detection limits have been computed to be 1 × 10^− 7 M and 4.9 × 10^− 7 M for Cys and THS, respectively.     

Determination of methimazole and carbimazole by flow-injection with chemiluminescence detection based on the inhibition of the Cu(II)-catalysed luminol-hydrogen peroxide reaction

This paper reports an indirect flow-injection (FI) method for the determination of the anti-hyperthyroid drugs methimazole and carbimazole in pharmaceuticals. The method was based on the inhibition that these thioimidazole drugs caused on the Cu(II)-catalysed chemiluminescence (CL) reaction between luminol and H₂O₂. The CL reaction was induced on-line and injection of the sample produced negative peaks as a result of the Cu(II) complexation by the analytes. The height of the FI peaks was proportional to the drug concentration in the sample. The linear range was 2-100 and 3-120 mg l⁻¹ for methimazole and carbimazole, respectively. The relative standard deviation was 1.9% for methimazole and 2.1% for carbimazole at the 50 mg l⁻¹ level (n=10). Common excipients present in pharmaceutical tablets were found not to interfere with the analysis. The method was applied to the determination of methimazole and carbimazole in pharmaceutical formulations with recoveries in the range 100±4%.     

Asymmetric intramolecular Pd(II)-catalysed amidocarbonylation of unsaturated amino alcohols

The first example of an asymmetric carbonylative bicyclisation of racemic N-protected 1-amino-pent-4-ene-3-ols (±)-1 catalysed by palladium(II) with chiral bis(oxazoline) ligands was investigated. The kinetic resolution of (±)-1 in the presence of chiral catalyst, p-benzoquinone in acetic acid under carbon monoxide atmosphere afforded enantiomerically enriched derivatives of 2-oxa-6-azabicyclo[3.3.0]octan-3-ones (R,R)-2 and (S,S)-2, respectively.     

Kinetic determination of iodide, based on the chlorpromazine-bromate reaction

A kinetic method based on the catalytic effect of iodide on the chlorpromazine-bromate reaction is described. The reaction was followed spectrophotometrically by measuring the increase in the absorbance at 525 nm. Under optimal experimental conditions (10(-4)M chlorpromazine hydrochloride, 1.5(itM) phosphoric acid, 5 x 10(-4)M potassium bromate, 40 degrees ), iodide was determined between 5 and 70 ng/ml by the tangent method. The influence of reaction variables, the precision and accuracy of the method and the effect of foreign ions were studied. The procedure was applied to the determination of iodide in iodinated salts and in rat thyroid.     

Catalyst and substituent effects on the rhodium(II)-catalysed intramolecular Buchner reaction

Intramolecular rhodium(II)-catalysed aromatic addition (Buchner) reactions of a range of α- and β-substituted α-diazoketones are reported. Both steric and electronic effects are evident for the aromatic additions investigated. In general, highly efficient aromatic addition is achieved through use of rhodium carboxylates bearing electronegative ligands, such as rhodium trifluoroacetate, while aromatic addition employing rhodium catalysts with more electron-donating ligands, such as rhodium caprolactam, is less efficient. Excellent levels of diastereoselectivity are possible for this process in the presence of rhodium acetate and rhodium caprolactam, however, a reduction in diastereocontrol is generally associated with use of the more reactive, electronegative catalysts. Interestingly, these catalyst effects can be overcome through the steric effects of the substituents on the α-diazoketone substrates, with the presence of sterically bulky substituents at the 2- or 3-position rendering the aromatic addition essentially catalyst independent in terms of efficiency and diastereocontrol.     

Indirect kinetic determination of As(III) based on its accelerating effect on the Os(VIII)-catalysed reaction between iodide and bromate in a micellar medium

Summary An indirect kinetic-photometric method for the determination of As(III) over the range 7–300 ng ml^–1 is proposed. It is based on the accelerating effect of this ion on the Os(VIII)-catalysed reaction between iodide and bromate, which is monitored via the triiodide formed. Arsenic(III) acts as an accelerator only in a very rapid initial step of the reaction and the rate processes occurring in the system after this step do not depend directly on the As(III) concentration. Therefore, the contribution of this ion to the reaction must be measured after its accelerating effect has cancelled. Dodecyltrimethyl-ammonium bromide (DTAB) micelles accelerate the reaction, and hence increase the sensitivity and selectivity of the determination of As(III) compared to reactions taking place in an aqueous medium. Some observations on the mechanism via which DTAB acts on the reaction are reported. The role of micellar media in catalytic kinetic methods is discussed.     

Spectrophotometric determination of palladium(II) based on its catalytic effect on the reduction of azure I by sodium hypophosphite

A catalytic-spectrophotometric method for the determination of traces of palladium(II) is proposed. The reaction is based on the catalytic action of palladium(II) on the reduction of azure I (λ_max = 647 nm) by sodium hypophosphite. The various variables affecting the sensitivity were studied, and a study of interfering ions was also carried out. The reaction gave a detection limit of 4.3 ng/mL palladium(II) and good reproducibility with a relative standard deviation of 1.53–1.98% in the palladium(II) concentration range 40–200 ng/mL. The method yielded another linear range (5–40 ng/mL) when using slightly different conditions. In this case, the detection limit was 0.78 ng/mL palladium(II), and the relative standard deviation for ten replicate analyses of 20 ng/mL palladium(II) was 2.05%. The method was applied to the determination of palladium in a sample of activated charcoal. The text was submitted by the authors in English.     

Kinetic spectrophotometric determination of tetraphenylporphinecobalt(II) based on photochromism of immobilized norbornadiene

The cobalt(II) complex is detected spectrophotometrically by its catalysis of a photochromic isomerism of norbornadiene (NBD). NBD is immobilized on porous glass beads, and is isomerized to quadricyclane (QC) by UV irradiation. The beads are then immersed in a solution containing tetraphenylporphinecobalt(II) [TPPCo(II)], and the QC is converted back to NBD by a catalytic reaction with TPPCo(II). The rate constant, measured spectrophotometrically, is proportional to the concentration of TPPCo(II). The detection limit of TPPCo(II) is 60 μM for a reaction period of 1 h. This spectrophotometric detection can be applied repetitively without any supply of the chemical reagent, as NBD immobilized on the porous glass beads can be re-isomerized to QC by UV irradiation.     

Kinetic determination of uranium(IV) based on its catalytic effect on the phosphomolybdic acid-iodide reaction

A kinetic spectrophotometric method has been developed for the determination of trace amounts of uranium(IV) based on its catalytic effect on the phosphomolybdic acid iodide reaction. A significant feature of the proposed procedure is the selectivity for uranium(IV); it enables the determination of trace amount of uranium in the presence of large excess of rare metalions and other cations and anions. The method can be applied to the determination of uranium within the concentration range of 0–12μg· cm^?3, and the detection limit of the method is 0.02μg·cm^?3. Trace amounts of uranium in thorium nitrate and scandium oxide had been determined by the procedure and the results are satisfactory.     

Copper(II)-catalysed oxidative coupling reaction of 3-hydroxyacetanilide with 3-methyl-2-benzothiazolinone hydrazone for the spectrophotometric determination of traces of copper(II)

A spectrophotometric method is developed for the determination of traces of copper(II), based on the catalytic oxidative coupling reaction of 3-hydroxyacetanilide with 3-methyl-2-benzothiazolinone hydrazone in the presence of ammonia and hydrochloric acid. Beer's law is obeyed in the copper(II) concentration range of 0.008-0.16 microg mL(-1), and the molar absorptivity at 530 nm is 2.5x10(5) L mol(-1) cm(-1). The Sandell's sensitivity of the product is 0.000254 microg cm(-2). The optimum reaction conditions and other important analytical parameters have been investigated. The proposed method is applied to the analysis of water and soil samples and the results are compared with the literature method.     

Kinetic methods for the determination of cadmium(II) based on a flow-through bulk optode

Three kinetic methods based on flow injection, flow, and stopped-flow injection were applied for the determination of Cd(II) using a flow-through bulk optode membrane that incorporates 1-(2-pyridylazo)-2-naphtol (PAN) in a plasticized poly(vinyl) chloride membrane entrapped in a cellulose support. The calibration graphs plotting the reflectance at 560 nm versus [Cd(II)](1/2) for the first two methods and versus [Cd(II)] for the third were linear up to 56.2 mg l(-1). The detection limits of the methods were 0.01, 0.06 and 0.8 mg l(-1), respectively. The FI method was selected for application purposes. The variation coefficient of the sensor response for 11.2 mg l(-1) of Cd(II) was +/-0.31 and +/-0.65% between different membranes. The sensor can be readily regenerated with a carrier (acetic-acetate) buffer of pH 4. The FI method was applied to the determination of cadmium in an alloy and in water.     

Indirect determination of Hg(II) based on reaction with metallic silver

Ohne Zusammenfassung

---

Thin-layer chromatographic separation of fluorescent amino acid derivatives of 5-isothiocyanato-1,3-dioxo-2-p-tolyl-2,3-dihydro-1H-benz[de]isoquinoline

Teile der Dissertationen von H. Görgen und J. Dörpinghaus, Med. Hochschule Hannover, 1978     

Formal synthesis of (+)-varitriol. Application of Pd(II)/Cu(II)-catalysed bicyclisation of unsaturated polyols

A formal and improved synthesis of natural (+)-varitriol from d-glucose and dimethyl l-tartrate, respectively, are reported. The key steps are the Pd(II)/Cu(II)-catalysed bicyclisation of O-benzyl protected triols l-xylo-15 and l-xylo-15/l-lyxo-15, respectively, followed by ring opening of intermediate dianhydro-l-gulitol 16. The syntheses of key intermediate of the furanoside portion 17 proceed in 13 steps with 5% (from bisacetone-d-glucose), and in 12 steps with 7.6% over-all yield from dimethyl l-tartrate, respectively.     

Kinetic and equilibrium studies on mercury(II)-coproporphyrin-I. Metal ion exchange reaction with cobalt(II) and application to determination of trace mercury(II)

The reaction of 3,8,13,18-tetramethyl-21H,23H-porphine-2,7,12,17-tetrapropionic acid or coproporphyrin-I (CPI) with mercury(II) was studied spectrophotometrically, and kinetic and equilibrium constants were determined; the influence of temperature on the reaction rate was also studied. It was verified that mercury(II) accelerates the incorporation reaction of cobalt(II) into CPI; the kinetics and mechanism of this reaction at high alkaline pH were studied. Sensitive kinetic methods for the determination of mercury(II) at ppb levels have been established; the apparent molar absorbivity and Sandell's sensitivity for the recommended procedure, at 368 nm, and 400 s after the start of the reaction, were: 4.23x10(5) (l mol(-1)cm(-1)) and 0.474 (ng cm(-2)) (for A=0.001).     

Kinetic explosion and bistability in adsorption and reaction of acetic acid on Pd(110)

The adsorption and reaction of acetic acid with Pd(110) have been studied using thermal molecular beam reaction measurements and temperature-programmed desorption. Acetic acid adsorption results in the formation of acetate species which decompose to produce coincident CO(2) and H(2) desorption from the surface. C is deposited on the surface from the dehydrogenation of the methyl group. In combination, these steps are found to exhibit unusual kinetics including (i) a "surface explosion" during heating and (ii) bistability in the reaction profile for heating and cooling curves. This is the first report of such behaviour for a complex system during in situ reaction.