Elimination reactions of (E)-2,4-dinitrobenzaldehyde O-benzoyloximes promoted by R2NH/R2NH2(+) in 70 mol % MeCN(aq). Change of reaction mechanism

Elimination reactions of (E)-2,4-(NO(2))(2)C(6)H(3)CHNOC(O)C(6)H(4)X (1) promoted by R(2)NH/R(2)NH(2)(+) in 70 mol % MeCN(aq) have been studied kinetically. The reactions are second-order and exhibit Bronsted beta = 0.27-0.32 and |beta(lg)| = 0.28-0.32. The result can be described by a negligible p(xy) interaction coefficient, p(xy) = partial differential beta/partial differential pK(lg) = partial differential beta(lg)/partial differential pK(BH) approximately = 0, which describes the interaction between the base catalyst and the leaving group. The negligible p(xy) coefficients are consistent with the (E1cb)(irr) mechanism.     

Generalized inverse method for computation of molecular force field

The generalized inverse method is applied to the force constants calculation problem having a nearly singular Jacobian matrix, and by substituting it by one of lower rank which is near to it and well conditioned it is possible to eliminate the convergence difficulties of the least squares iteration process. A further significant advantage of the method is that certain matrix theoretical considerations give the possibility of deciding at the end of the iteration which force constants are determined by the available observations. Numerical results for the dimethylmercury molecule are given.     

Simulating prescribed particle densities in the grand canonical ensemble using iterative algorithms

We present two efficient iterative Monte Carlo algorithms in the grand canonical ensemble with which the chemical potentials corresponding to prescribed (targeted) partial densities can be determined. The first algorithm works by always using the targeted densities in the kT log(rho(i)) (ideal gas) terms and updating the excess chemical potentials from the previous iteration. The second algorithm extrapolates the chemical potentials in the next iteration from the results of the previous iteration using a first order series expansion of the densities. The coefficients of the series, the derivatives of the densities with respect to the chemical potentials, are obtained from the simulations by fluctuation formulas. The convergence of this procedure is shown for the examples of a homogeneous Lennard-Jones mixture and a NaCl-CaCl(2) electrolyte mixture in the primitive model. The methods are quite robust under the conditions investigated. The first algorithm is less sensitive to initial conditions.     

Solvent extraction of lead(II) with N-cyclohexyl-N-nitrosohydroxylamine into methyl isobutyl ketone

The distribution equilibrium of the lead-cnha complex in the water-methyl isobutyl ketone (MIBK) system has been studied at 25 degrees . From graphical treatment of the equilibrium data, it was deduced that PbL(2) is the complex extracted. By use of the program LETAGROP-DISTR, values for the distribution and the stability constants of PbL(2) have been calculated: log K(DC) = 1.84 +/- 0.11; log beta(1) = 6.68 +/- 0.09 and log beta(2) = 10.28 +/- 0.09. On the basis of these results and those of previous studies, a method for determination of lead(II), copper(II) and cadmium(II) by atomic-absorption spectrometry, after extraction with cnha and 4-methylpyridine into MIBK, is proposed.     

Thermodynamics of Cm(III) in Concentrated Salt Solutions: Carbonate Complexation in NaCl Solution at 25°C

The carbonate complexation reactions of Cm(III) were studied by time-resolved laser fluorescence spectroscopy in 0–6 m NaCl at 25°C. The ionic strength dependence of the stepwise formation constants for the carbonato complexes Cm(CO₃) _n ^3–2n with n = 1, 2, 3, and 4 is described by modeling the activity coefficients of the Cm(III) species with Pitzer's ion-interaction approach. Based on the present results and literature data for Cm(III) and Am (III), the mean carbonate complexation constants at I = 0 are calculated to be: log ₁₀₁ ^o =8.1 ±0.3, log ₁₀₂ ^o =13.0 ± 0.6, log ₁₀₃ ^o =15.2 ± 0.4, and log ₁₀₄ ^o =13.0 ± 0.5. Combining these equilibrium constants at infinite dilution and the evaluated set of Pitzer parameters, a model is obtained, that reliably predicts the thermodynamics of bivalent actinide An(III) carbonate complexation in dilute to concentrated NaCl solution.     

metal ion interactions of picoline-2-aldehyde thiosemicarbazone

The reactions of picoline-2-aldehyde thiosemicarbazone (PATS) with silver, mercury, iron(II) and cobalt have been investigated in various environments. The compositions of the complexes have been investigated by continuous variation and molar ratio methods. Stability constants have been evaluated by means of SCOGS and a new program SQUAD. The formation constants, measured at 25 degrees and 0.10M ionic strength were as follows: Ag(PATS), logbeta(101) = 13.40; HgH(PATS), log beta(1110) = 23.6; HgH(2)(PATS)(2), log beta(1220) = 42.1; HgH(2)(PATS)(EDTA), log beta = 44.0; FeH(3)(PATS)(3), log beta(133) = 44.9; FeH(2)(PATS)(3), log beta(123) = 41.7; FeH(PATS)(3), log beta(113) = 38.4; Fe(PATS)(3), log beta(103) = 34.2. A tentative value for a cobalt complex is also suggested. A computer program, suitable for calculation of optimum conditions for a chemical analysis is also introduced and its use is illustrated for the silver-PATS-EDTA system.     

Mixed hydroxide complex formation and solubility of bismuth in nitrate and perchlorate medium

From the precipitation borderlines in the pBi'-pH diagram, determined experimentally under CO(2)-free conditions, the stability constants of bismuth hydroxide, bismuthoxynitrate and bismuthoxyperchlorate have been established. The following values have been found Nitrate-medium: Perchlorate-medium: log *K(SO)(OH) = 5.2, log *K(SO)(OH) = 5.2; log *K(SO)(NO(3)) = -1.2, log*K(SO)(ClO(4)) = -0.9; log *beta(2) = -4.0, log *beta(2) = -4.1; log *beta(3) = -10.0, log *beta(3)= -9.9; log *beta(4) = -21.5, log *beta(4) = -21.5; log *beta(1,0,1) = 1.2, log *beta(1,0,1) = 3.5. The constants refer to precipitates equilibrated for 30 min, prepared at room temperature (23 +/- 0.5 degrees) in sodium perchlorate or sodium nitrate medium with an ionic strength of 1.00 +/- 0.01. Concerning error propagation it is stated that pBi' values calculated with these constants will have a standard deviation of about 0.1 log unit.     

New efficient calixarene amide ionophores for the selective removal of strontium ion from nuclear waste: synthesis, complexation, and extraction properties.

Three novel lower rim hexamide derivatives 5(6), 7(6), and 9(6) of p-hydroxycalix[6]arene and four octamides 5(8), 7(8)-9(8) derived from the corresponding p-hydroxycalix[8]arene were synthesized, and their potential as extractants in radioactive waste treatment was evaluated, in comparison with upper rim analogues 12(6) and 12(8) and other existing selective neutral ionophores currently used in radioactive waste treatment. Extraction of alkali and alkaline earth metal picrates from water to dichloromethane, and of the corresponding nitrates from acidic water solution simulating radioactive waste, to 2-nitrophenyl hexyl ether (NPHE), showed that the lower rim amides extract divalent cations much better than monovalent ones. The upper rim hexa-12(6) and octamide 12(8) are very inefficient ligands, hardly extracting any cation. In all cases, p-alkoxy octamides are more efficient and selective extractants than the corresponding hexamides. In the case of simulated waste solutions, the distribution coefficients for strontium removal by octamides (6.5 < D(Sr) < 30) are much higher than the corresponding value (D(Sr)) found for dicyclohexyl-18-crown-6 (DC18C6), and the same applies for the strontium/sodium selectivity, which is 6500 < D(Sr)/D(Na) < 30 000 for octamides and 47 for DC18C6. ESI-MS, UV-vis, and X-ray crystal structure studies give consistent results and indicate the formation of 2:1 (cation/ligand) strontium complexes for all octamides tested. Stability constants were determined in homogeneous methanol solution for alkali metal (log beta(11) < or = 2), calcium (4.3 < or = log beta(11) < or = 6.0; 9.4 < or = log beta(21) < or = 12.0), and strontium (5.6 < or = log beta(11) < or = 12.3) ions using a UV-vis competition method with 1-(2-pyridylazo)-2-naphthol (PAN). They confirm the high efficiency and high divalent/monovalent selectivity found in metal ion extraction experiments for the new octamide ligands. Evidence for a positive cooperative effect between the two metal ion binding sites was obtained in the case of the Ca(2+) complex of octamide 1(8).     

Synthesis of a ligand based upon a new entry into the 3-hydroxy-N-alkyl-2(1H)-pyridinone ring system and thermodynamic evaluation of its gadolinium complex

The synthesis of a new, more water soluble derivative of TREN-Me-3,2-HOPO (tris[(3-hydroxy-1-methyl-2-oxo-1,2- didehydropyridine-4-carboxamido)ethyl]amine) is presented. The synthesis starts with the condensation reaction of (N-methoxyethylamino)acetonitrile hydrochloride and oxalyl chloride to give 3,5-dichloro-N-(methoxyethyl)-2(1H)-pyrazinone. The 3-position is readily substituted with a benzyloxy group, and the pyrazinone is converted to ethyl 3-(benzyloxy)-N-(methoxyethyl)-2(1H)-pyridinone-4-carboxylate by a Diels-Alder cycloaddition with ethyl propiolate. Basic deprotection of the ester followed by activation, coupling to tren, and acidic deprotection of the benzyl groups gives the ligand TREN-MOE-3,2-HOPO (tris[(3-hydroxy-1-(methoxyethyl)- 2-oxo-1,2-didehydropyridine-4-carboxamido)ethyl]amine). The gadolinium complex of TREN-MOE-3,2-HOPO was prepared by metathesis, starting from gadolinium chloride. The solubility of the new metal complex is significantly enhanced. The four protonation constants (determined by potentiometry) for TREN-MOE-3,2-HOPO (log Ka1 = 8.08, log Ka2 = 6.85, log Ka3 = 5.81, log Ka4 = 4.98) are virtually identical to those reported for the parent ligand. The stability constants for the gadolinium complex of TREN-MOE-3,2-HOPO determined by potentiometry (log beta 110 = 19.69(2), log beta 111 = 22.80(2)) and by spectrophotometry (log beta 110 = 19.80(1), log beta 111 = 22.88(1), log beta 112 = 25.88(1)) differ slightly from those for the parent ligand; this follows from a change in the complexation model in which a new diprotonated species, [Gd(TREN-MOE-3,2-HOPO)(H)2]2+, was included. The presence of this extra species was demonstrated by factor analysis, comparison of spectral data, and nonlinear least-squares refinement. Significant formation of this species is observed between pH 3 and pH 1.5.     

Use of electrospray mass spectrometry (ESI-MS) for the study of europium(III) complexation with bis(dialkyltriazinyl)pyridines and its implications in the design of new extracting agents

ESI mass spectrometry was used to investigate the europium complexation by tridentate ligands L identical with 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)-pyridines (DATP) that have shown unique separation properties of actinides(III) from lanthanides(III) in nitric acid solutions. Complexes of three ligands, namely methyl (DMTP), n-propyl (DnPTP), and iso-propyl (DiPTP), have been investigated in acidic solutions to check the aqueous-phase stability of Eu(L)(3)(3+) ions identified previously in the solid state. The data obtained show, first, the presence of stable Eu(L)(3)(3+) ions with DnPTP (log beta(3)(app) = 12.0 +/- 0.5) and DiPTP (log beta(3)(app) = 14.0 +/- 0.6) in methanol/water (1:1 v/v) solutions under pH range 2.8-4.6 and, second, a mechanism whereby alkyl moieties contribute to a self-assembling process leading to the formation of Eu(L)(3)(3+) ions. Other complexes such as Eu(L)(2)(3+) ions are only observed for DnPTP (log beta(2)(app) = 6.7 +/- 0.5) and DMTP (log beta(2)(app) = 6.3 +/- 0.1) and Eu(L)(3+) only for DMTP (log beta(1)(app) = 2.9 +/- 0.2). The log beta(n)(app) values for the Eu(L)(n)(3+) (n = 1-3) complexes were determined at pH 2.8. Better insight was given in this study concerning the role of the hydrophobic exterior of the ligands for the design of a new range of extracting agents.     

The hydrolysis of lead(II). A potentiometric and enthalpimetric study

The hydrolysis of lead(II) has been investigated by potentiometric titrations (ionic medium 1.0M NaClO(4) and 1.0M KNO(3)) and enthalpimetric titrations (ionic medium 1.0M NaClO(4)) at 25 degrees . The reaction model that gave the best fit to the data for 1.0M NaClO(4) comprised the following five ions: Pb(OH)(+), Pb(3)(OH)(2+)(4), Pb(3)(OH)(+)(5), Pb(4)(OH)(4+)(4) and Pb(6)(OH)(4+)(8). The formation constants, and enthalpy changes (kJ/mol) for these species, defined according to equation (1), have the values log beta(11) = -7.8, DeltaH(0)(11) = 24; log beta(34) = -22.69, DeltaH(0)(34) = 112; log beta(35) = -30.8, DeltaH(0)(35) = 146; log beta(44) = -19.58, DeltaH(0)(44) = 86; log beta(68) = -42.43, DeltaH(0)(68) = 215. Equilibrium constants determined in nitrate medium show good agreement with those pertaining to perchlorate medium if complexation of lead(II) with nitrate is taken into account.     

Solvent extraction of Cd(II) with N-cyclohexyl-N-nitrosohydroxylamine and 4-methylpyridine into methyl isobutyl ketone

The distribution equilibria of the complexes cadmium-cnha and cadmium-cnha-4-methylpyridine in the water-methyl isobutyl ketone system have been studied at 25 degrees , by using (109)Cd as a radiotracer to measure the metal distribution ratio. A very sensitive method for detection of (109)Cd, based on the use of a liquid scintillator, has been developed. From the graphical treatment of the equilibrium data, it has been deduced that CdL(2) is the complex extracted in the absence of 4-methylpyridine, and that the adduct CdL(2)B is extracted when the second ligand is present. This model has been checked by treating the data with the program LETAGROP-DISTR and the following equilibrium constants have been obtained: stability constants of CdL(2), log beta(1) = 2.82 +/- 0.14, log beta(2) = 5.981 +/- 0.004; distribution constant of CdL(2), log K(DC) = -0.49 +/- 0.01; adduct formation constant of CdL(2)B, log K(s) = 2.70 +/- 0.07.     

Polarographic studies of cadmium, zinc and manganese(II) iodide complexes in acetonitrile

Cadmium, zinc and manganese(II) iodide complexes have been studied polarographically in acetonitrile and the electrode reactions for these complexes discussed. The overall stability constants of the iodide complexes of these metal ions were evaluated and corrected for the effect of the ion-pairing electrolyte. The values for log beta(4) of CdI(4)(2-) and ZnI(4)(2-) are 26.2 and 18.4 respectively and the values found for the Mn(II) iodide complex are log beta(1) = 3.5, log beta(2) = 5.6, log beta(3) = 7.8, log beta(4)= 10.0, log beta(5) = 12.2 and log beta(6) = 14.4. Within certain limits, the wave-height for each complex is proportional to the metal concentration.     

Study on the stability of the serotonin and on the determination of its acidity constants

The present work aimed at describing the spectral behaviour of the serotonin and to evaluate its acidity constants using three different methods, using two spectrophotometry titrations and a third method that involved point-by-point analysis, which permitted to monitor closely and determine the evolution of the serotonin species in solution as a function of time. The three methods allowed estimation of three acidity constants associated to the same number of functional groups that form part of the molecule. The results given by the point-by-point analysis were: log(beta1) = 24.95 +/- 0.12; log(beta2) = 20.20 +/- 0.10; log(beta3) = 10.89 +/- 0.018.     

Experimental correlation between the pKa value of sulfonphthaleins with the nature of the substituents groups

This work presents the results obtained from a spectrophotometry study performed on some indicators of the sulfonphtaleins like phenol red (PR), thymol blue (TB), bromothymol blue (BTB), xylenol orange (XO) and methylthymol blue (MTB). During the first stage the acidity constants of some of the indicators were determined using the data from spectrophotometry, potentiometry and with the use of the software SQUAD. These were as follows: for the equilibrium 2H+BTB<-->H(2)BTB, log beta(2)=15.069+/-0.046 and for H+BTB<-->HBTB, log beta(1)=8.311+/-0.044. For the XO and the MTB five values were calculated for each, namely, for MTB: log beta(5)=42.035, log beta(4)=38.567+/-0.058, log beta(3)=32.257+/-0.057, log beta(2)=23.785+/-0.057, and log beta(1)=12.974+/-0.045 while for XO: log beta(5)=40.120+/-0.102, log beta(4)=35.158+/-0.062, log beta(3)=29.102+/-0.053, log beta(2)=21.237+/-0.044, and log beta(1)=11.682+/-0.044. During the second stage, a study was conducted on the effect of the substituents present in the indicators to determine the effect of different functional groups on the pK(a) value corresponding to the last indicator's dissociation.     

A quantitative densitometric method for the rapid separation and quantitation of the major lipids of tissues and lipoproteins by high-performance thin-layer chromatography. II. Reduction of the densitometric data

A BASIC program is described for acquisition of data and data reduction for an automated densitometric system for quantitation of lipids separated by high-performance thin-layer chromatography. The program allows calculation of mass of samples from log/log calibration curves computed from standards. The calculated masses are reported as nmol/volume or nmol/mg protein. The program contains a flexible dialog system which permits its use for a variety of applications in addition to the system described for quantitation of lipids.     

The exponents method for calculating equilibrium concentrations of complex species in solution

The exponents method for calculating the concentrations of species in multimetal-multiligand systems is introduced. This method uses the Newton-Raphson method with restricted step iteration, which guarantees a monotonically decreasing objective function. Variable transformation and scaling are performed to avoid underflows and overflows during the calculations. A special linear solver using the eigenvalues and eigenvectors of the Jacobian matrix is implemented for overcoming disastrous singularity of this matrix, and the singular value decomposition method is applied for setting the initial guess. In addition, polynomial extrapolation is used for improving the performance when simulating a diagram of concentrations of species. The method was tested with 14 systems of different sizes over the whole pH range and presented robust and efficient behavior. © 1995 by John Wiley & Sons, Inc.     

EDTA and mixed-ligand complexes of tetravalent and trivalent plutonium

EDTA forms stable complexes with plutonium that are integral to nuclear material processing, radionuclide decontamination, and the potentially enhanced transport of environmental contamination. To characterize the aqueous Pu(4+/3+)EDTA species formed under the wide range of conditions of these processes, potentiometry, spectrophotometry, and cyclic voltammetry were used to measure solution equilibria. The results reveal new EDTA and mixed-ligand complexes and provide more accurate stability constants for previously identified species. In acidic solution (pH < 4) and at 1:1 ligand to metal ratio, PuY (where Y4- is the tetra-anion of EDTA) is the predominant species, with an overall formation constant of log beta110 = 26.44. At higher pH, the hydrolysis species, PuY(OH)- and PuY(OH)(2)2-, form with the corresponding overall stability constants log beta(11 - 1) = 21.95 and log beta(11 - 2) = 15.29. The redox potential of the complex PuY at pH = 2.3 was determined to be E(1/2) = 342 mV. The correlation between redox potential, pH, and the protonation state of PuY- was derived to estimate the redox potential of the Pu(4+/3+)Y complex as a function of pH. Under conditions of neutral pH and excess EDTA relative to Pu4+, PuY(2)4- forms with an overall formation constant of log beta120 = 35.39. In the presence of ancillary ligands, mixed-ligand complexes form, as exemplified by the citrate and carbonate complexes PuY(citrate)3- (log beta1101 = 33.45) and PuY(carbonate)2- (log beta1101 = 35.51). Cyclic voltammetry shows irreversible electrochemical behavior for these coordinatively saturated Pu4+ complexes: The reduction wave is shifted approximately -400 mV from the reduction wave of the complex PuY, while the oxidation wave is invariant.