Polarographic determination of osmium with the osmium(VIII)-cerium(IV)-arsenic(III) system

A highly sensitive and novel polarographic method has been developed for determination of ultratrace amounts of osmium, based on the catalysis of the cerium(IV)-arsenic(III) reaction by osmium(VIII). The reaction rate is monitored by measuring the arsenic(III) with a single-sweep oscillopolarograph. Osmium concentrations from 7.0 x 10(-11) to 5.0 x 10(-9)M can be determined by the initial rate method. The method has been applied to determination of osmium in refined ore and chlorination residues with satisfactory results.     

A highly sensitive spectrophotometric method for determination of micro amounts of arsenic

A highly sensitive spectrophotometric method for determination of arsenic, based on the formation of an ion-association complex between arsenoantimonomolybdenum blue and Malachite Green, has been developed. The ion-association complex is soluble in the presence of Triton X-305, so arsenic can be determined directly in aqueous solution. The apparent molar absorptivity for arsenic is 1.13 x 10(5) l.mole(-1).cm(-1) at 640 nm. Beer's law is obeyed for 0-5 mug of arsenic. The lower limit of determination (absorbance = 0.01) is 4 ng ml in the final solution.     

A novel chemiluminescent method for the determination of salicylic acid in bactericidal solutions

A new flow-injection procedure has been developed for the determination of salicylic acid based on the enhancement of the chemiluminescence from the cerium(IV)-Tween 20 reaction by salicylic acid in acidic medium. The method is simple, selective and sensitive with a detection limit of 2.5x10(-9) g mL(-1). It is applicable to the determination of salicylic acid in the concentration range of 4.0x10(-9)-1.1x10(-6) g mL(-1). The relative standard deviation (RSD) is 0.85% for 4.0x10(-7) g mL(-1) salicylic acid (n=11). The method has been successfully applied to the determination of salicylic acid in bactericidal solutions. Furthermore, it is suggested that light emission from cerium(IV)-Tween 20 reaction is probably because of the formation of singlet oxygen 1O2* and the emitter is excited oxygen molecular pairs O2(1delta(g))O2(1sigma(g)-).     

Preconcentration of arsenic(V) as molybdoarsenic heteropoly acid by dynamic sorption

The sorption of molybdoarsenic heteropoly acid (MAA) and its ion pair with tri-n-octylamine (TOA) on sorbents of different nature and hydrophobic filters has been studied. It is demonstrated that MAA is efficiently extracted on the polyacrylate sorbent Amberlyte XAD-8; the distribution coefficient of arsenic is 1 x 10⁴ cm³/g for the sorption from 0.35-1.5 M H₂SO₄. Conditions of the quantitative extraction of MAA in the presence of TOA on thin-layer cellulose triacetate filters are found. A procedure is proposed for the sorption-X-ray fluorescence determination of arsenic in potable water. The detection limit of arsenic is 10 Μg/L for the sorption from 100 mL of a solution.     

Speciation of arsenic in water samples by high-performance liquid chromatography-hydride generation-atomic absorption spectrometry at trace levels using a post-column reaction system

Anion-exchange HPLC has been combined with hydride generation - atomic absorption spectrometry (HG-AAS) for the routine speciation of arsenite, arsenate, monomethylarsenic acid and dimethylarsinic acid. The sensitivity of the AAS-detection was increased by a post-column reaction system to achieve complete formation of volatile arsines from the methylated species and arsenate. The system allows the quantitative determination of 0.5 microg/l of each arsenic compound in water samples. The stability of synthetical and natural water containing arsenic at trace levels was investigated. To preserve stored water samples, a method for quantitative separation of arsenate at high pH-values with the basic anion-exchange resin Dowex 1x8 was developed.     

Chemiluminescence determination of ferulic acid by flow-injection analysis using cerium(IV) sensitized by rhodamine 6G

A simple, sensitive and rapid flow-injection chemiluminescence method has been developed for the determination of ferulic acid based on the chemiluminescence reaction of ferulic acid with rhodamine 6G and ceric sulfate in sulphuric acid medium. Strong chemiluminescence signal was observed when ferulic acid was injected into the acidic ceric sulfate solution in a flow-cell. The present method allowed the determination of ferulic acid in the concentration range of 8.0x10(-6) to 1.0x10(-4)moll(-1) and the detection limit for ferulic acid was 8.7x10(-9)moll(-1). The relative standard deviation was 2.4% for 10 replicate analyses of 1.0x10(-5)moll(-1) ferulic acid. The proposed method was applied to the determination of ferulic acid in Taita Beauty Essence samples with satisfactory results.     

Permanganate-based chemiluminescence analysis of ferulic acid using flow injection.

A simple, sensitive and rapid flow-injection chemiluminescence method has been developed for the determination of ferulic acid based on the chemiluminescence reaction of ferulic acid with potassium permanganate in a nitric acid medium. A strong chemiluminescence signal was observed when ferulic acid was injected into an acidic potassium permanganate solution in a flow-cell. The present method allowed the determination of ferulic acid in the concentration range of 6.0 x 10(-6) to 2.0 x 10(-4) mol l(-1); the detection limit (3sigma) for ferulic acid was 9.6 x 10(-8) mol l(-1). The relative standard deviation was 1.0% for 11 replicate analyses of 2.0 x 10(-4) mol l(-1) ferulic acid. The proposed method was applied to the determination of ferulic acid in real samples with satisfactory results. Moreover, the reaction mechanism of the chemiluminescence system was primarily considered.     

Determination of some catechol derivatives by a flow injection electrochemiluminescent inhibition method

A flow injection electrochemiluminescent inhibition method has been developed for the determination of some catechol derivatives based on studying the inhibition phenomena of these compounds to the electrochemiluminescence of luminol. The linear calibration range of 5x10(-8) to 1x10(-5), 5x10(-8) to 1x10(-5) and 1x10(-8) to 5x10(-5) mol l(-1(,)) the detection limit of 1.2x10(-8), 2.1x10(-8) and 5.2x10(-9) mol l(-1)were obtained for catechol, 3,4-dihydroxybenzoic acid and chlorogenic acid, respectively. The method has higher sensitivity and wider dynamic range than conventional spectrophotometric method or chemiluminescent method. The method has been successfully applied to determine chlorogenic acid in cigarettes. The mechanism of the inhibition effect was proposed. Catechol derivatives mostly react with the freshly electrogenerated oxygen species on the electrode surface and lead to the inhibition of electrochemiluminescence.     

Spectrofluorometric determination of trace amounts of terbium with 4-chlorosalicylic acid, EDTA, and cetyltrimethylammonium bromide.

The quadruple complex formed by terbium with 4-chlorosalicylic acid (CSA), EDTA and cetyltrimethylammonium bromide (CTMAB) has been used for the sensitive spectrofluorometric determination of terbium in mixed rare earths. The effect of the experimental conditions on the fluorescence intensity was defined. Under the optimum conditions selected, the fluorescence intensity was linear with the terbium concentration in the range of 3.0 x 10(-8)-1.0 x 10(-5) mol/L with a detection limit of 8.0 x 10(-9) mol/L (S/N = 3). It has been satisfactory for the determination of terbium in mixed rare earths with good recovery.     

Covalent modification of glassy carbon electrode with glutamic acid for simultaneous determination of uric acid and ascorbic acid

A novel covalently modified glassy carbon electrode with glutamic acid has been fabricated via an electrochemical oxidation procedure and was applied to the catalytic oxidation of uric acid (UA) and ascorbic acid (AA), reducing the overpotentials by about 0.2 V and 0.3 V, respectively. Based on its strong catalytic function toward the oxidation of UA and AA, the modified electrode resolved the overlapping voltammetric response of UA and AA into two well-defined voltammetric peaks with both cyclic voltammetry (CV) and differential pulse voltammetry (DPV), which can be used for the simultaneous determination of these species in a mixture. The catalytic peak current obtained from DPV was linearly dependent on the UA and AA concentration in the range 2 x 10(-6)-4 x 10(-4) mol L-1 and 1.0 x 10(-6)-4 x 10(-4) mol L-1 with correlation coefficients of 0.996 and 0.997, respectively. The detection limits (3 delta) for UA and AA were 1.1 x 10(-6) mol L-1 and 9.2 x 10(-7) mol L-1, respectively. The modified electrode shows good sensitivity, selectivity and stability, and has been applied to the determination of UA and AA simultaneously in human urine samples with satisfactory results.     

Construction,analytical study and application of a new chloramine-t selective electrode

A chloramine-T (CAT) selective electrode with a liquid membrane of nickel batho-phenanthroline—chloramine-T dissolved in 2-nitro-p-cymene is described. The liquid membrane electrode exhibits rapid and near Nernstian response to chloramine-T activity from 10^-1 to 10^-4 M. The response is unaffected by pH in the range 5–9. Major interferences are penodate and perchlorate. In analytical applications, direct potentiometnc methods for the determination of chloramme-T, ascorbic acid, and arsenic(III), and a titnmetric method for ascorbic acid are described. Ascorbic acid and arsenic(IU) in the ranges 0.4–40 and 0.5–2 mg, respectively, can be determined with relative errors of 1–2%. The method has been applied to the determination of ascorbic acid in pharmaceutical preparations.     

Trace analysis of aluminum in natural waters with rubeanic acid by adsorption chronopotentiometry

The determination of trace levels of aluminum in natural waters with rubeanic acid (RA) by adsorption chronopotentiometry is developed in this paper. Optimum experimental conditions include an accumulation potential of -0.40 V, accumulation time of 60 s, and a RA concentration of 6x10(-6) M in 0.2 M NaAc-HAc buffer solution (pH 4.6). The response is linear over the 1x10(-8) approximately 4x10(-7) M concentration range. The detection limit is 5.6x10(-9) M and the relative S.D. (at the 3x10(-7) M level) is 2.6%. Possible interferences are evaluated. The method has been applied to the determination of trace levels of Al in various real samples. Direct determination of toxic forms of Al in surface waters by this technique is also explored.     

Electrochemical behavior of uric acid and epinephrine at an electrochemically activated glassy carbon electrode

A pretreated glassy carbon electrode by electrochemical activation has been proposed for simultaneous investigation and determination of epinephrine and uric acid by differential pulse voltammetry. This pretreated glassy carbon electrode exhibits a potent and persistent electron-mediating behavior followed by well-separated oxidation peaks towards epinephrine and uric acid with a potential difference of 161 mV, which is large enough to determine epinephrine and uric acid individually and simultaneously. Under the optimum condition, the detection limit of epinephrine is 8.9 x 10(-8)mol L(-1) and that of uric acid is 1.6 x 10(-7)mol L(-1). The proposed method was successfully used for the determination of epinephrine and uric acid in real samples with satisfactory results.     

Indirect atomic-absorption determination of ppM levels of arsenic by combustion of an MIBK extract of arsenomolybdic acid

An indirect atomic-absorption method for arsenic has been developed. Arsenic(III) is oxidized to arsenic(V) by iodine, then arsenomolybdic acid is formed and extracted into MIBK from 0.2-1.6M hydrochloric acid. Excess of molybdate is scrubbed from the organic phase, and then the molybdenum in the heteropoly acid is determined by its atomic absorption at 313.3 nm. Silicate and phosphate interfere. A procedure is described for determination of ppM levels of arsenic in water.     

Polarographic determination of atmospheric nitrogen oxides

A new polarographic method is described for the determination of nitrite/nitrogen oxides. The nitrite is first diazotized with p-aminobenzoic acid, followed by coupling to 8-hydroxyquinoline to produce an azo dye. This azo dye is adsorbable on a mercury drop electrode and its reduction is reversible. The linear response range is 6 x 10(-9)-3 x 10(-7) g/ml. The detection limit is 4 x 10(-9) g/ml. This method has been applied to the determination of nitrogen oxides in the air.     

Determination of trace thiocyanate in body fluids by a kinetic fluorimetric method

A simple and very sensitive kinetic fluorimetric method is reported for the determination of trace amount of thiocyanate. The proposed method is based on the inhibition effect of thiocyanate on oxidation of rhodamine 6G by potassium bromate in sulfuric acid solution. The detection limit for thiocyanate is 1.63 x 10(-6) mmol/l. The linear range of the determination is 4.82 x 10(-6)-4.13 x 10(-5) mmol/l. This method has been used to determine trace thiocyanate in urine and saliva of smokers and non-smokers. The results obtained are satisfactory.     

流动注射化学发光抑制法测定抗坏血酸

基于抗坏血酸对Ｌｕｍｉｎｏｌ－ＫＩＯ４－Ｈ２Ｏ２体系化学发光反应的抑制作用,建立了化学发光抑制快速测定抗坏血酸的新方法。该方法线性范围为１．０＊１０＾－７－１．０＊１０＾－５ｍｏｌ／Ｌ,检出限为６．０＊１０＾－８ｍｏｌ／Ｌ,对８．０＊１０＾－７ｍｏｌ／Ｌ抗坏血酸１１次平行测定的相对标准偏差为１．０％。用于维生素Ｃ片剂及注射液中抗坏血酸含量的测定,结果令人满意。     

A new chemiluminescence reagent for the determination of ruthenium

A new reagent proflavine-N, N, N', N'-tetraacetic acid (PTA) synthesized in our laboratory has been found useful as a chemiluminescence reagent for the determination of ruthenium (Ru) in pH 2.5 sulfuric acid solution containing acetone, it can be oxidized catalytically by hydrogen peroxide. With Ru(III) as catalyst, it emits light selectively. The linear range is between 2.0 x 10(-8) and 2.0 x 10(-5) g/ml. The detection limit and the recovery rate of the method are 1.0 x 10(-9)g/ml and 96.0-102%, respectively. The method has been satisfactorily applied to determine trace Ru(III) in synthesized sample.     

Covalently immobilized aminonaphthalimide as fluorescent carrier for the preparation of optical sensors

By replacing the hydrogen of the 4-amino group of a 4-amino-1,8-naphthalimide derivative with an N-acryloxyethyl group, the fluorophore has been covalently immobilized on an optical sensor surface by UV photopolymerization. The optical sensor obtained can be used for the determination of picric acid. The linear range and detection limit of the sensor are 9.80x10(-7)-1.96x10(-4) mol L(-1) and 7.1x10(-7) mol L(-1), respectively. Leaching of the fluorophore from the membrane is effectively prevented by covalent immobilization, resulting in a sensor with a relatively long lifetime. The response time of the sensor is short, and the reproducibility and reversibility are good. The sensor has been used for the indirect determination of the chloroquine content of pharmaceutical tablets.     

A poly(3-acetylthiophene) modified glassy carbon electrode for selective voltammetric measurement of uric acid in urine sample

A reliable and reproducible method for the determination of uric acid in urine samples has been developed. The method is based on the modification of a glassy carbon electrode by 3-acetylthiophene using cyclic voltammetry. The poly(3-acetylthiophene) modified glassy carbon electrode showed an excellent electrocatalytic effect towards the oxidation of uric acid in 0.1 m phosphate buffer solution (PBS) at pH 7.2. Compared with a bare glassy carbon electrode (GCE), an obvious shift of the oxidation peak potential in the cathodic direction and a marked enhancement of the anodic current response for uric acid were observed. The poly(3-acetylthiophene)/GCE was used for the determination of uric acid using square wave voltammetry. The peak current increased linearly with the concentration of uric acid in the range of 1.25 x 10(-5)-1.75 x 10(-4) M. The detection limit was 5.27 x 10(-7) M by square wave voltammetry. The poly(3-acetylthiophene)/GCE was also effective to determine uric acid and ascorbic acid in a mixture and resolved the overlapping anodic peaks of these two species into two well-defined voltammetric peaks in cyclic voltammetry at 0.030 V and 0.320 V (vs. Ag/AgCl) for ascorbic acid and uric acid, respectively. The modified electrode exhibited stable and sensitive current responses toward uric acid and ascorbic acid. The method has successfully been applied for determination of uric acid in urine samples.