Voltammetric measurement of haloperidol following adsorptive accumulation at glassy-carbon electrodes

A sensitive stripping voltammetric method is reported for trace measurement of the psychotherapeutic drug haloperidol. The method is based on adsorptive preconcentration of haloperidol on the glassy-carbon electrode in an open circuit, followed by medium exchange and voltammetric determination of surface species. Cyclic voltammetry was used to explore the adsorptive behaviour and the results obtained suggest that the adsorption of haloperidol corresponds to the Frumkin-type isotherm. The adsorptive stripping response was evaluated with respect to stripping mode, electrolyte. pH, preconcentration time, concentration dependence, possible interference and other variables. The detection limit was 1.3 x 10(-9)M (10 min preconcentration) and the response was linear. The relative standard deviation (at the 1.3 x 10(-6)M level) was 2.3%. Applicability to a patient's urine sample is illustrated.     

Trace measurements of the antineoplastic agent methotrexate by adsorptive stripping voltammetry

An extremely sensitive voltammetric method is presented for trace measurement of the cancer chemotherapy drug methotrexate. The method is based on controlled adsorptive preconcentration of methotrexate on the hanging mercury-drop electrode, followed by voltammetric determination of the surface species. Cyclic voltammetry was used to explore the interfacial behaviour. The adsorptive stripping response was evaluated with respect to preconcentration time and potential, pH, concentration dependence, stripping mode, possible interferences, and other variables. The detection limit found was 2 x 10(-9)M (5-min preconcentration), the response was linear, and the relative standard deviation (at the 1.6 x 10(-7)M level) 2.2%. Sensitive adsorptive stripping measurements were also obtained by use of a carbon-paste disk electrode. Applicability to urine analysis is illustrated.     

Application of adsorptive stripping voltammetry to the study of immunoglobulin A and its interaction with benzodiazepine drugs

The adsorptive stripping voltammetric behaviour of immunoglobulin A has been optimised with respect to accumulation time, accumulation potential, scan rate and drop size and its interaction with benzodiazepine drugs in 0.05 M phosphate buffer (pH 7.4) has been studied. Immunoglobulin A was observed to form a strongly reducible complex with diazepam and a labile non-reducible complex with flurazepam.     

Adsorptive stripping voltammetric measurements of trace levels of uranium following chelation with mordant blue 9

The chelate of uranium with the azo dye Mordant Blue 9 is shown to be adsorbed and then reduced on the hanging mercury drop electrode. These properties have been exploited in developing a highly sensitive stripping voltammetric procedure for trace determination of uranium. With controlled adsorptive accumulation for 5 min, a detection limit near 2 x 10(-10)M uranium is obtained. Cyclic voltammetry has been used to characterize the interfacial and redox behaviour. The effect of various operational parameters on the stripping response is discussed. Experimental conditions include use of 1 x 10(-6)M Mordant Blue 9 in 0.05M acetate buffer (pH 6.5), an accumulation potential of -0.43 V, and a linear potential scan. The response is linear up to 1.2 x 10(-7)M uranium, and the relative standard deviation at 4.2 x 10(-8)M is 3.2%. The effects of possible interferences from organic surfactants or metal ions have been investigated.     

Trace measurements of colchicine by adsorptive stripping voltammetry

A highly sensitive voltammetric method for trace measurements of the alkaloid colchicine is described. The method is based on the controlled adsorptive accumulation of the drug at the hanging mercury drop electrode, followed by voltammetric determination of the surface species. The adsorptive stripping response is evaluated with respect to preconcentration time and potential, solution pH, voltammetric waveform and other variables. With a 10-min preconcentration, a detection limit of 1.3 x 10(-10)M is obtained. The relative standard deviation (at the 1 x 10(-7)M level) is 1.1%. Applicability to urine analysis is illustrated.     

Square wave adsorptive voltammetric determination of sunset yellow

Square wave adsorptive stripping voltammetry was used for determining trace amounts of dye Sunset Yellow (E-110) for the first time. Its adsorptive voltammetric behaviour followed by a square wave mode step was investigated at different pH media. Sunset Yellow in 0.5 M NH (4)Cl NH (3) buffer solution gave an adsorptive stripping voltammetric peak at the hanging mercury drop electrode at -0.60 V using an accumulation potential of -0.40 V. The effect of experimental parameters that affected this determination are discussed. The calibration graph to determine Sunset Yellow was linear in the range 5-90 mug 1(-1), obtaining a relative standard deviation of 2.2% for a solution of 30 mug 1(-1) (n = 10) in the same day. The determination limit was 5 mug 1(-1) after 15 s of accumulation at -0.40 V. The proposed method was applied to determine this dye in several commercial refreshing drinks, which contained small amounts of this compound. Measurements were made directly over diluted solutions of commercial samples. Similar results were obtained between adsorptive stripping square-wave voltammetric values and the obtained by application of a HPLC method with spectrophotometric detection.     

Trace determination of yttrium and some heavy rare-earths by adsorptive stripping voltammetry

The interfacial and redox behaviour of rare-earth chelates with Solochrome Violet RS are exploited for developing a sensitive adsorptive stripping procedure. Yttrium and heavy rare earths such as dysprosium, holmium and ytterbrium can thus be measured at ng ml levels and below, by controlled adsorptive accumulation of the metal chelate at the hanging mercury drop electrode, followed by voltammetric measurement of the surface species. With a 3-min preconcentration time, the detection limit ranges from 5 x 10(-10) to 1.4 x 10(-9)M. The relative standard deviation at the 7 ng ml level ranges from 4 to 7%. A separation method is required to differentiate between the individual rare-earth metals.     

Differential pulse cathodic stripping voltammetry of the copper complexes of glycyl-L-histidyl-glycine at a hanging mercury drop electrode

The behaviour of the copper complexes of glycyl-L-histidyl-glycine (GHG) was investigated using cyclic voltammetry and differential pulse voltammetry after their adsorptive accumulation on the surface of a hanging mercury drop electrode (HMDE). The nature of the observed cathodic and anodic peaks was established and optimum conditions were found for the differential pulse cathodic stripping voltammetric detemination of GHG at the 1 x 10(-8)M concentration level using adsorptive accumulation at -0.20 V vs. Ag/AgCl reference electrode and the cathodic stripping peak around -0.4 V (pH 8.3). This peak corresponds to the reduction of the Cu(I)-GHG complex formed at the HMDE surface as an intermediate in the reduction of Cu(II)-GHG to Cu(O)amalgam.     

Cyclic and linear sweep voltammetry of cefazolin and cefmetazole: electroanalytical applications

A study of the variables influencing the voltammetric behaviour of cephalosporins and cefamycins bearing substituents of the S-R' type (R' = non-electroactive group) has been carried out in order to determine the most suitable conditions for obtaining reproducible peaks for the determination of both types of antibiotic and the calculation of kinetic and thermodynamic parameters. The voltammetric behaviour of cefazolin and cefmetazole has also been studied. The voltammetric peak yielded by these two antibiotics at high sweep rates and low concentrations is due solely to the reduction of adsorbed molecules as the contribution of those molecules moving to the electrode through diffusion to the current is negligible. The peak current of cefazolin varies linearly with its concentration in the range 10(-9)-10(-7) M, whereas the linear range for cefmetazole is between 10(-8) and 5 X 10(-7) M, which allows the electroanalytical determination of the two antibiotics at these concentrations.     

Cyclopentanone thiosemicarbazone, a new complexing agent for copper determination in biological samples by adsorptive stripping voltammetry.

A selective and sensitive stripping voltammetric method for the determination of trace amounts of copper(II) with cyclopentanone thiosemicarbazone (CPTSC) is presented. The method is based on the adsorptive accumulation of the resulting copper-CPTSC complex on a hanging mercury drop electrode, followed by the stripping voltammetric measurements at the reduction current of the adsorbed complex at -0.37 V vs. Ag/AgCl. The optimal conditions for the stripping analysis of copper include pH 9.3, deposition time of 120 s, and a deposition potential of -0.1 V (vs. Ag/AgCl). The peak current is linearly proportional to the copper concentration over a range 3.14 x 10(-9) M to 1.57 x 10(-6) M with a limit of detection of 1.57 x 10(-9) M. The technique has been applied to the determination of copper in biological samples, like urine and whole blood.     

Adsorptive stripping voltammetric behaviour of uranium chelates of some azo compounds

Summary The adsorptive stripping voltammetric behaviour of Arsenazo III, Eriochrome Black T, 4-(2-pyridylazo) resorcinol, Mordante Blue 9 and their uranyl complexes has been investigated in detail. All compounds and complexes adsorb on the static mercury drop electrode. Results are presented and the limitations of the methods are discussed.     

Trace measurement of dipyridamole by adsorptive stripping voltammetry

A sensitive adsorptive stripping voltammetric method for trace measurement of dipyridamole in alkaline solution is described. The method is based on the adsorptive accumulation of the drug at the hanging mercury drop electrode, followed by linear sweep voltammetric determination. The response is evaluated with respect to percentage of ethanol, preconcentration time and potential, and concentration of NaOH. The detection limit of 1.0 x 10(-9)M is obtained under optimized conditions with a 5-min preconcentration. Applicability to injection, tablets and urine analysis is illustrated.     

Electrochemical properties and square-wave voltammetric determination of pravastatin

The electrochemical reduction and adsorptive voltammetric behaviour of pravastatin have been studied by means of cyclic and square-wave voltammetry at a hanging mercury-drop electrode in electrolytes of different pH. Within the entire pH range (2.0–9.0) in Britton–Robinson buffer, pravastatin gave rise to a single voltammetric peak in the potential interval from −1.22 to −1.44 V, depending on pravastatin concentration. It was found that the reduction of pravastatin proceeds via a relatively stable intermediate, which is transformed to the final electroinactive product by a coupled chemical reaction or can be re-oxidized back to pravastatin. The rate of chemical transformation is controlled by the proton concentration. The electrode mechanism has the properties of a surface redox reaction. A sensitive analytical method for trace analysis of pravastatin based on the adsorptive stripping technique has been developed. The calibration plot was linear in the range 8×10⁻⁸–5×10⁻⁷ mol L⁻¹. Application of the square-wave voltammetric method to determination of pravastatin in a pharmaceutical dosage form, without sample pretreatment, resulted in acceptable deviation from the stated concentration.     

An Electrochemical Sensor Based on Silver Nanoparticles‐Benzalkonium Chloride for the Voltammetric Determination of Antiviral Drug Tenofovir

A simple voltammetric nanosensor was described for the highly sensitive determination of antiviral drug Tenofovir. The benzalkonium chloride and silver nanoparticles were associated to build a nanosensor on glassy carbon electrode. Surface characterictics were achieved using scanning electron microscopic technique. The voltammetric measurements were performed in pH range between 1.0 and 10.0 using cyclic, adsorptive stripping differential pulse and adsorptive stripping square wave voltammetry. The linear dependence of the peak current on the square root of scan rates and the slope value (0.770) demonstrated that the oxidation of tenofovir is a mix diffusion‐adsorption controlled process in pH 5.70 acetate buffer. The linearity range was found to be 6.0×10⁻⁸–1.0×10⁻⁶ M, and nanosensor displayed an excellent detection limit of 2.39×10⁻⁹ M by square wave adsorptive stripping voltammetry. The developed nanosensor was successfully applied for the determination of Tenofovir in pharmaceutical dosage form. Moreover, the voltammetric oxidation pathway of tenofovir was also investigated at bare glassy carbon electrode comparing with some possible model compounds (Adenine and Adefovir).     

铜的腺嘌呤络合物在悬汞电极表面上的吸附形态和氧化还原行为

本文详细地研究了铜的腺嘌呤（Ａｄｅ）络合物在悬汞电极（ＨＭＤＥ）表面上的吸附形态和伏安行为。实验结果揭示了单层吸附饱和之前有Ｃｕ＾＋Ａｄｅ，Ｃｕ２＾＋（Ａｄｅ）２形态的共吸附作用，随着电极表面的吸附浓度增长，Ａｄｅ络合物分子有从平面向垂直吸附的定向作用。哦的多层吸附和聚合作用发生在吸附分子垂直定向以后。本文还测定了有关电极过程的动力学参数。     

Highly sensitive adsorptive stripping voltammetric method for the ultra-trace determination of chromium(VI).

A rapid differential pulse adsorptive stripping voltammetric method has been developed for the ultra-trace determination of chromium using 2,2'-bipyridine. The base electrolyte used is 0.1 M NH4Cl (pH 6.0). The peak current was found to increase substantially with the addition of nitrite ions. A well-defined peak was observed at -1.3 V. Parameters, like concentration of the ligand, concentration of nitrite ion, accumulation potential, accumulation time, rest period, drop size, scan rate, pulse amplitude etc. have been optimized. Under the optimum conditions, the 3 sigma detection limit was found to be 0.02 ppb (3.8 x 10(-10) M). The method is highly selective and sensitive, and has been applied to the determination of Cr(VI) in spiked water, effluents and ore samples.     

Adsorptive Stripping Voltammetry of Phytohemagglutinin

Abstract

The adsorptive stripping voltammetric behaviour of the lectin, phytohemagglutinin, has been optimised with respect to accumulation time, accumulation potential, pulse amplitude, scan rate and drop size. Adsorptive stripping voltammetry has also been used to study the interaction of this protein with nannose, galactose and N-acetyl-D-galactosamine.     

Catalytic Adsorptive Stripping Voltammetric Determination of Cobalt and Nickel as Their α‐Furil Dioxime Complexes

The exploitation of the catalytic‐adsorptive effect in the Co(II)‐dioxime‐nitrite systems provides a significant increase of the Co adsorptive stripping voltammetric response and subsequently the influence of the interfering elements such as Ni and Zn is strongly diminished. The purpose of the present paper was to study voltammetric properties of Co and Ni in a supporting electrolyte containing ammonia buffer, α‐furil dioxime in the absence and in the presence of nitrite, by differential pulse polarography and adsorptive stripping voltammetry. Results of detailed studies aimed at optimizing the analytical parameters for simultaneous catalytic adsorptive stripping voltammetric determination of Co and Ni in the form of complexes with α‐furil dioxime in the presence of Zn matrix are presented. In the supporting electrolyte of composition 0.1 M NH₄Cl, 0.5 M NH₃, 4×10^?5 M αFD, 0.5 M NaNO₂ the linearity range amounts from 0.03 to 2.4 μg/L for Co and from 0.3 to 9 μg/L for Ni for 20 s of accumulation. The method enables the determination of Co and Ni in the presence of a great excess of Zn with the detection limit equal to 0.02 μg/L Co and 0.2 μg/L Ni obtained for a 20 s accumulation time.     

Trace analysis of germanium

Summary The dp-polarographic and stripping voltammetric behaviour of germanium(IV) in the presence of various supporting electrolytes is discussed. Moreover, a highly sensitive adsorptive stripping voltammetric technique has been developed. The determination is based on the accumulation of germanium(IV)-diol complexes by adsorption at a hanging mercury drop electrode, followed by cathodic stripping voltammetry. Suitable for the complex forming reaction are catechol (1,2-dihydroxybenzol) and pyrogallol (1,2,3-trihydroxybenzol). By using pyrogallol the detection limit is 0.1 ng ml^–1 with a standard deviation of ±13%. A multistage combined procedure with adsorptive stripping voltammetry is described for the determination of germanium traces in ginseng and garlic. The results are compared with those using extraction-spectrophotometry and atomic absorption spectrometry.Dedicated to Prof. Dr. G. Schulze on the occasion of his 60th birthday     

Quantification of terbutaline in pharmaceutical formulation and human serum by adsorptive stripping voltammetry at a glassy carbon electrode

The electrochemical oxidative behavior of terbutaline at the glassy carbon electrode was studied in a series of the Britton-Robinson buffer of pH 2--11. Cyclic and square-wave voltammograms of terbutaline at the pH values 相似文献