Direct extraction of nickel from model sulfate solution with hydrazide of versatic <Emphasis Type="Italic">tert</Emphasis>-Carboxylic acids

Possibility of direct extraction of 0.66 g L–1 Ni(II), 0.048 g L^–1 Co(II), and 0.024 g L^–1 Zn(II) in the presence of the nine commonly accompanying elements from a model solution for underground sulfuric acid leaching of an oxidized Ni ore with a 0.4–0.6 M solution of a hydrazide of Versatic C₁₅–C₁₉ acids in kerosene was considered. The optimal conditions of extraction, extract washing to remove impurities, and re-extraction of Ni and Co were determined. It was found that the direct extraction of up to 90% of nickel, cobalt, and zinc is possible with an at least fivefold concentration in the extraction stage. The separation of Ni from Co and co-extracted Fe, Zn, and Mn is possible in the re-extraction stage by washing of the organic phase with a 0.5 M HCl solution.     

Ethyleneimine Anchored on Thiol-Modified Silica Gel Surface-Adsorption of Divalent Cations and Calorimetric Data

Activated silica gel was previously modified by the silylant agent 3-mercaptopropyltrimethoxysilane. The organofunctionalized silica gel containing pendant groups ended with the -SH functions reacted with the three-member cyclic ethyleneimine molecules to yield the new ligand attaching sulfur and nitrogen basic centers available to complex cations. This final anchored surface adsorbs MX(2) (M=Co(2+), Ni(2+), Cu(2+), and X=Cl(-), NO(3)(-)) at 298+/-1 K. A considerable increase in adsorption capacity was observed for nitrate counteranions. This process of extraction was followed by the batch method and the order of the maximum capacities found was Ni(2+)>Cu(2+)>Co(2+) for both series of salts. The pendant immobilized groups-cation interaction processes showed exothermic enthalpies. Those values are more pronounced for chlorides, with the largest values obtained for cobalt. The calculated DeltaG values are in agreement with the spontaneity of the proposed reactions and the complexation is entropically favored. Copyright 2000 Academic Press.     

Neutron activation analysis of high purity nickel by solvent extraction using 2-benzylpyridin/benzene

A radiochemical neutron activation analysis using solvent extraction has been applied for the determination of trace impurities in high purity nickel. Because of the high activity of⁵⁸Co produced by the nuclear reaction,⁵⁸Ni(n,p)⁵⁸Co, cobalt should be separated from the impurities. Removal of cobalt from the other trace elements in the aqueous acidic solution containing 1M thiocyanate ion (KSCN) was achieved by extraction with 1M2-benzylpyridin (BPy) in benzene. From the result of tracer experiments, cobalt was completely separated from most other elements except Fe, Mo and Zn. To determine the experimental accuracy, NIST SRM 673 nickel oxide was analyzed and the results agreed well within 10% deviation. This established radiochemical method was applied to the analysis of high purity nickel samples.     

Solvent extraction in hydrometallurgy: the role of organophosphorus extractants

Solvent extraction (SX) has come to be one of the most important separation processes in hydrometallurgy. Phosphorus-based extractants have proved to be of particular importance, especially for the separation of cobalt from nickel. However it was not until the dialkyl phosphinic acid reagent, CYANEX 272, and its dithio analogue CYANEX 301, became available that liquors containing very low Co:Ni ratios of at least 1:40 to even >1:100 could be treated. This has opened the way to the direct application of SX for the separation of Co from Ni in liquors derived from the leaching of nickel mattes from the smelting of nickel sulphide ores and from the pressure acid leaching of nickel laterite ores. This paper describes the development of the range of Cytec extractants and, in particular, discusses the development of their application for the separation of cobalt from nickel. Examples of actual industrial operating plants will also be given and individual flowsheets discussed.     

Preconcentration of cobalt with N-(dithiocarboxy)sarcosine and amberlite xad-4 resin

Cobalt reacts with N-(dithiocarboxy)sarcosine (DTCS) to form a 1:3 Co:DTCS complex which is so stable that after its formation no decomposition occurs even in 4M hydrochloric acid. The complex is sorbed on a column of Amberlite XAD-4 copolymer from an acidic solution and eluted with 10 ml of a 1:1:3 v v mixture of 1.0M ammonia solution (pH = 9), 0.1M EDTA and methanol. The absorbance of the eluted chelate is measured at 320 nm against water ( = 2.15 x 10(4) l.mole(-1).cm(-1)). The recovery of cobalt from 1 litre of tap-water or sea-water is quantitative. The effect of diverse ions can be eliminated by the addition of EDTA after chelation of the cobalt. The copper complex with DTCS is partly sorbed on the column because of its slow rate of decomposition by EDTA, but most of the copper chelate sorbed can be eluted with hydrochloric acid and any co-eluted with the cobalt chelate can be completely decomposed by heating the eluate. Cobalt enrichment factors of at least 100 are obtained, so the method is applicable to the determination of cobalt at the ng ml level.     

Simultaneous preconcentration and determination of nickel and cobalt using functionalised mesoporous silica spheres by ICP-OES

In this work functionalised mesoporous silica spheres have been utilised for the simultaneous preconcentration of nickel and cobalt. The silica spheres (SiSPs) prepared by the sol-gel method were functionalised with sodium diethyldithiocarbamate (DDTC-SiSPs). They were characterised by SEM, TEM, XRD, FTIR, CHN and nitrogen adsorption. The adsorption efficiency of DDTC-SiSPs was examined by batch equilibrium technique. The DDTC-SiSPs showed 100% adsorption for Ni (II) and Co (II). The effect of changing variables such as pH, shaking time, sample volume, preconcentration factor, eluent type and volume were investigated so as to obtain maximum recovery with high selectivity over interfering ions. The maximum adsorption capacity was found to be 15.15 mg g^?1 and 11.80 mg g^?1 for Ni (II) and Co (II) respectively using DDTC-SiSPs. 100% recovery was achieved with 5 mL of 2 M HNO₃. The maximum preconcentration factor was 400 and the 3σ limits of detection were 0.201 µg L^?1 and 0.198 µg L^?1 for Ni (II) and Co (II) respectively. Thermodynamic studies showed that adsorption of Ni (II) and Co (II) on DDTC-SiSPs is exothermic with enthalpy changes of –0.514 KJ mol^?1 and –0.854 KJ mol^?1 for Ni (II) and Co (II) respectively. The method was applied to the preconcentration and determination of Ni (II) and Co (II) from tap, river and sea water.     

Chromotropic acid-functionalized polyurethane foam: A new sorbent for on-line preconcentration and determination of cobalt and nickel in lettuce samples

A chromotropic acid-functionalized polyurethane foam has been developed for use in an on-line preconcentration system for cobalt and nickel determination. The packing material was prepared by covalent coupling of chromotropic acid with the polyurethane foam through an azo group. Co and Ni ions were sorbed in the mini-column, from which they could be eluted directly to the nebulizer-burner system of a flame atomic absorption spectrometer. Elution of cobalt and nickel from the mini-column can be accomplished with 0.50 and 0.75 M HCl solutions, respectively. The enrichment factors obtained were 22 (Co) and 27 (Ni), for 60 s preconcentration time, and 57 (Co) and 59 (Ni), if a preconcentration time of 180 s was used. Under the optimum conditions, the proposed procedure allowed the determination of metals with detection limits of 0.43 (cobalt) and 0.52 microg/L (nickel), respectively, on using preconcentration periods of 180 s. The accuracy of the developed procedure was evaluated by analysis of the certified reference materials NIST 1515 Apple Leaves and NIST 1570a Spinach Leaves. The method was applied to the analysis of lettuce samples. The contents of cobalt in the samples analyzed varied from 0.75 to 0.98 microg/g. Nickel was not detected in the lettuce samples.     

A rotating disc electrode study of oxygen reduction at platinised nickel and cobalt coatings

Platinized nickel and cobalt coatings, Pt(Ni) and Pt(Co), have been prepared on glassy carbon, GC, rotating disc electrode substrates by a two-step room temperature procedure that involved the electrodeposition of nickel and cobalt layers and their spontaneous partial replacement by platinum (“transmetalation”) when immersed into a chloroplatinic acid solution. By tuning the quantity of initially deposited nickel and cobalt, Pt(Ni) and Pt(Co) bimetallic coatings having a 26% atom Ni and 30% atom Co composition have been prepared. For both materials typical Pt surface electrochemistry was recorded during fast voltammetry in deaerated acid, pointing to the existence of a continuous Pt skin over a Pt–Ni and Pt–Co core. Oxygen reduction at the Pt(Ni)/GC and Pt(Co)/GC electrodes was studied by means of steady-state voltammetry at a rotating disc electrode and the construction of Tafel plots from corresponding voltammetric data. It was found that, when the initial potential of the voltammetric sweep allowed the formation of a complete Pt oxide monolayer, then oxygen reduction was hindered for low overpotentials at Pt(Ni) and Pt(Co), compared to pure bulk Pt. On the other hand, when the initial potential was less positive (thus leading to the formation of a fraction of surface oxide monolayer) the presence of Ni and Co enhanced the kinetics of oxygen reduction. The former behaviour is attributed to a decrease in oxide reduction ability of Pt in the presence of Ni and Co, while the latter to an increase in dissociative oxygen chemisorption due to Ni and Co.     

Silica gel-polyethylene glycol as a new adsorbent for solid phase extraction of cobalt and nickel and determination by flame atomic absorption spectrometry

In this paper a novel solid phase extraction method to determine Co(II) and Ni(II) using silica gel-polyethylene glycol (Silica-PEG) as a new adsorbent is described. The method is based on the adsorption of cobalt and nickel ions in alkaline media on polyethylene glycol-silica gel in a mini-column, elution with nitric acid and determination by flame atomic absorption spectrometry. The adsorption conditions such as NaOH concentration, sample volume and amount of adsorbent were optimized in order to achieve highest sensitivity. The calibration graph was linear in the range of 0.5-200.0 ng mL⁻¹ for Co(II) and 2.0-100.0 ng mL⁻¹ for Ni(II) in the initial solution. The limit of detection based on 3S_b was 0.37 ng mL⁻¹ for Co(II) and 0.71 ng mL⁻¹ for Ni(II). The relative standard deviations (R.S.D.) for ten replicate measurements of 40 ng mL⁻¹ of Co(II), and Ni(II) were 3.24 and 3.13%, respectively. The method was applied to determine Co(II) and Ni(II) in black tea, rice flour, sesame seeds, tap water and river water samples.     

Determination of nickel and cobalt in natural waters and biological material by reductive chronopotentiometric stripping analysis in a flow system without sample deoxygenation

The instrumental set-up consists of a thin-layer cell with a glassy carbon working electrode and an inlet valve by means of which six different solutions can be sucked through the cell. The system is controlled by a microprocessor and suction is provided by means of a peristaltic pump. In the first step of the analytical cycle, a mercury film is plated onto the glassy carbon electrode and then the sample solution is allowed into the cell and nickel(II) and cobalt(II) are potentiostatically adsorbed onto the mercury film as their dimethylglyoxime complexes. Nickel(II) and cobalt(II) are then reduced in a medium of 5 M calcium chloride by means of constant current and simultaneously the microprocessor records the potential vs. time behaviour of the working electrode. Finally the mercury film is removed by mild oxidation in an iodine/iodide solution and the glassy carbon surface is cleaned with ethanol and sodium hydroxide prior to the next analytical cycle. The cobalt(II) and nickel(II) concentrations are evaluated by means of a standard addition procedure. The technique was applied to drinking, estuarine and sea water samples. The detection limits on the one sigma level after one minute of potentiostatic adsorption were 9 and 11 ng l^?1 for nickel(II) and cobalt(II), respectively. Nickel(II) and cobalt(II) were determined in reference samples of bovine liver and sea-water sediments after acid digestion. In order to obtain correct cobalt values, it was necessary to reduce cobalt(III) species formed during the acid digestion with sodium tetrahydroborate.     

Ion-exchange recovery of nickel(II) and cobalt(II) from sulfuric acid solutions

Sorption recovery of nickel(II) and cobalt(II) in their joint presence in sulfuric acid solutions was studied on new samples of domestic ion exchangers of CYBBER brand. It was shown that the ion exchangers under study have a high sorption capacity for ions of both nonferrous metals, depending on the structure of a sorbent and on the acidity of a contacting solution. It was found that, after Co(II) and Ni(II) ions are extracted from weak or strong sulfuric acid solutions, they can be effectively eluted from the ion exchangers under study with a 2 M hydrochloric acid solution to an extent of 85–95% (nickel) and 87–95% (cobalt).     

Cobalt(II)/nickel(II)-centered Keggin-type heteropolymolybdates: syntheses, crystal structures, magnetic and electrochemical properties

New Keggin-type cobalt(II)/nickel(II)-centered heteropolymolybdates, (C3H5N2)6[Co(II)Mo12O40]10H2O (1) and (NH4)3(C4H5N2O2)3[Ni(II)Mo12O40] (2), were isolated and characterized by IR, UV-vis, single-crystal X-ray diffraction, thermogravimetric, magnetic, as well as electrochemical analyses. The polyanion in the two compounds displays the well-known alpha-Keggin structure, which is composed of four Mo3O13 units formed by edge-sharing octahedra. Four Mo3O13 units connect each other by vertices, and the Co(2+) or Ni(2+) is located in the center. Magnetic measurements show that the central Co(2+) and Ni(2+) are in high spin states (with S = 3/2 and S = 1, respectively) exhibiting paramagnetic behaviors. Cyclic voltammetric experiments for 1 represent a quasi-reversible one-electron redox Co(3+)/Co(2+) couple and two four-electron reversible redox processes ascribed to Mo centers, while 2 only shows two four-electron redox processes attributed to Mo centers in pH = 0.5 H2SO4 solution.     

Synthesis and structural characterization of new trinuclear cobalt(II) and nickel(II) complexes possessing five- and six-coordinated geometry

Tri-nuclear cobalt and nickel complexes ([(CoL)₂(OAc)₂Co]?·?THF (I) and [(NiL)₂(OAc)₂(THF)₂Ni]?·?THF (II)) have been synthesized by reaction of a new Salen-type bisoxime chelating ligand of 2,2′-[ethylenedioxybis(nitrilomethylidyne)]dinaphthol(H₂L) with cobalt(II) acetate tetrahydrate or nickel(II) acetate tetrahydrate, respectively. Complexes I and II were characterized by elemental analyses, IR, TG-DTA and ¹H-NMR etc. The X-ray crystal structures of I and II reveal that two acetate ions coordinate to three cobalt or nickel ions through M–O–C–O–M (M?=?Co or Ni) bridges and four μ-naphthoxo oxygen atoms from two [ML] units also coordinate to cobalt(II) or nickel(II). Complex I has two distorted square-pyramidal coordination spheres and an octahedral geometry around Co1. In complex II all three nickel ions are six-coordinate.     

Dissolution optimization and kinetics of nickel and cobalt from iron-rich laterite ore,using sulfuric acid at atmospheric pressure

More than 70% of the world's nickel reserves are found in laterite ores. In this research, a laterite ore sample, containing Ni, Co, and Fe, was employed to study the recovery of nickel and cobalt. Thus, the effect of calcination, acid concentration, percent solids, and stirring rate on nickel and cobalt recoveries from an iron-rich laterite sample was investigated. Optimization with response surface methodology and kinetic studies were performed. The calcination of the sample prior to leaching at 500°C for 2 h provided condition for better nickel and cobalt dissolutions. At optimal conditions, the concentration of sulfuric acid, solid-to-liquid ratio, stirring speed, temperature, and time test were equal to 5 M, 0.1, 370 rpm, 90°C, and 2 h, respectively. The highest recoveries of nickel and cobalt were 65.9% and 63.1%, respectively. Solids content had a negative effect on Ni and Co recovery, whereas acid concentration was positively affected. Addition of 10% (w/v) NaCl in the presence of 5 M acid concentration, 60°C, 370 rpm, and leaching time of 2 h increased the nickel and cobalt recoveries, 15.3% and 21.4%, respectively. The high dependence of process on temperature indicates chemical control; the activation energies E_a = 59.54 and E_a = 45.74 kJ/mol, respectively, for nickel and cobalt, were also consistent with this conclusion.     

Cloud point extraction, preconcentration and simultaneous spectrophotometric determination of nickel and cobalt in water samples

Cloud point extraction has been used for the preconcentration and simultaneous spectrophotometric determination of nickel and cobalt after the formation of a complex with 2-amino-cyclopentene-1-dithiocarboxylic acid (ACDA), and latter analysis by spectrophotometer using Triton X-114 as surfactant. The parameters affecting the separation phase and detection process were optimized. Under the optimum experimental conditions (i.e. pH=5, 0.07 mM ACDA, Triton X-114=0.25% (w/v)), calibration graphs were linear in the range of 20-500 and 20-200 microg l(-1) with detection limits of 10 and 7.5 microg l(-1) for Ni and Co, respectively. The method was applied to the determination of Ni and Co in natural and waste water samples with satisfactory results.     

Flame AAS and UV-VIS determination of cobalt, nickel and palladium using the synergetic effect of 2-benzoylpyridine-2-pyridylhydrazone and thiocyanate ions

A quantitative synergetic extraction procedure for cobalt, nickel and palladium from thiocyanate aqueous solutions into methyl isobutyl ketone (MIBK), containing 2-benzoylpyridine-2-pyridylhydrazone (BPPH), was studied by flame atomic absorption spectrometry (FAAS) and molecular absorption spectrometry (UV-VIS). Using FAAS, linear calibration graphs were obtained from 0.0-0.5 mg l(-1) Co(II), 0.0-1.5 mg l(-1) Ni(II) and 0.0-2.0 mg l(-1) Pd(II). The reproducibilities were s(r,Co(II))=2.0%, s(r,Ni(II))=1.0% and s(r,Pd(II))=1.3% and the limits of detection were c(L,Co(II))=0.004 mg l(-1), c(L,Ni(II))=0.009 mg l(-1) and c(L,Pd(II))=0.012 mg l(-1). Using UV-VIS method the linear calibration graphs were 0.0-0.5 mg l(-1) for Co(II), 0.0-1.0 mg l(-1) for Ni(II) and 0.0-2.0 mg l(-1) for Pd(II). The reproducibilities were s(r,Co(II))=1.3%, s(r,Ni(II))=1.7% and s(r,Pd(II))=1.0% and the limits of detection were c(L,Co(II))=0.001 mg l(-1), c(L,Ni(II))=0.004 mg l(-1) and c(L,Pd(II))=0.002 mg l(-1). The extraction method is almost free from interferences and has been successfully applied to the determination of cobalt, nickel and palladium in dental alloys.     

高效毛细管电泳法测定镍盐中的钴含量

用２－亚硝基－１－萘酚－５－磺酸与Ｎｉ、Ｃｏ络合,在波长５３０ｎｍ和其他优化测定条件下,用高效毛细管电泳法定量测定市售镍盐中微量钴,为测定镍 微量钴提供了一种快速,简便的新方法。     

Properties of a high capacity iminodiacetate-agarose adsorbent and its application in a flow system with on-line buffering of acidified samples for accumulation of metal ions in natural waters

Adsorption properties of a fast iminodiacetate-agarose adsorbent, IDA-Novarose, with a capacity of 120-140 mumol/ml were studied for preconcentration of eight transition elements. A FIA-ICP-AES system was used in the study. It was shown that 0.3 ml of the adsorbent, packed in a column, can quantitatively accumulate Cr(3+), Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Zn(2+) and Cd(2+) from standard solutions in the pH range between 4 and 8 at high loading flow rates (10-80 ml/min). The rate of adsorption was studied in batch experiments and found to be fast and equal for the divalent metal ions but relatively slow for accumulation of Cr(3+) and Fe(3+). On-line buffering of acidified samples improved the accumulation of metal ions from synthetic samples spiked with humic acid. Quantitative uptakes were observed for most of the studied metals. The accumulation of Cr(3+) was found to be quite sensitive to the ionic strength and some loss of inert complexes of Fe(3+) was also observed. The method was applied to the analysis of certified riverine water (SLRS-3), a tap water and a lake water. With few exceptions the results obtained by ICP-AES after preconcentration agreed well with the certified concentrations and results found by ICP-MS.     

Ni(II) ion-imprinted solid-phase extraction and preconcentration in aqueous solutions by packed-bed columns

Solid-phase extraction (SPE) columns packed with materials based on molecularly imprinted polymers (MIPs) were used to develop selective separation and preconcentration for Ni(II) ion from aqueous solutions. SPE is more rapid, simple and economical method than the traditional liquid-liquid extraction. MIPs were used as column sorbent to increase the grade of selectivity in SPE columns. In this study, we have developed a polymer obtained by imprinting with Ni(II) ion as a ion-imprinted SPE sorbent. For this purpose, NI(II)-methacryloylhistidinedihydrate (MAH/Ni(II)) complex monomer was synthesized and polymerized with cross-linking ethyleneglycoldimethacrylate to obtain [poly(EGDMA-MAH/Ni(II))]. Then, Ni(II) ions were removed from the polymer getting Ni(II) ion-imprinted sorbent. The MIP-SPE preconcentration procedure showed a linear calibration curve within concentration range from 0.3 to 25 ng/ml and the detection limit was 0.3 ng/ml (3 s) for flame atomic absorption spectrometry (FAAS). Ni(II) ion-imprinted microbeads can be used several times without considerable loss of adsorption capacity. When the adsorption capacity of nickel imprinted microbeads were compared with non-imprinted microbeads, nickel imprinted microbeads have higher adsorption capacity. The K_d (distribution coefficient) values for the Ni(II)-imprinted microbeads show increase in K_d for Ni(II) with respect to both K_d values of Zn(II), Cu(II) and Co(II) ions and non-imprinted polymer. During that time K_d decreases for Zn(II), Cu(II) and Co(II) ions and the k′ (relative selectivity coefficient) values which are greater than 1 for imprinted microbeads of Ni(II)/Cu(II), Ni(II)/Zn(II) and Ni(II)/Co(II) are 57.3, 53.9, and 17.3, respectively. Determination of Ni(II) ion in sea water showed that the interfering matrix had been almost removed during preconcentration. The column was good enough for Ni determination in matrixes containing similar ionic radii ions such as Cu(II), Zn(II) and Co(II).     

Activated carbon cloth filled pipette tip for solid phase extraction of nickel(II), lead(II), cadmium(II), copper(II) and cobalt(II) as 1,3,4-thiadiazole-2,5-dithiol chelates for ultra-trace detection by FAAS

A solid phase extraction method is established for preconcentration of nickel, lead, cadmium, copper and cobalt using pipette tip solid phase extraction. The presented process was dependent on chelation of analytes with 1,3,4-thiadiazole-2,5-dithiol, then allowing the solution to flow through an activated carbon cloth packed pipette tip. The adsorbed metal chelates on the surface of activated carbon cloth were eluted by 5 mL of 3 M HNO₃. The concentrations of nickel, lead, cadmium, copper and cobalt were detected using a flame atomic absorption spectrometer (FAAS). The pipette tip solid phase extraction exhibit a preconcentration factor of 120. The limit of detection values were 2.7, 1.7, 1.3, 2.0 and 2.9 µg L^?1 for Ni(II), Pb(II), Cd(II), Cu(II) and Co(II), respectively. Validation of the method was checked by the analysis of TMDA-53.3 and TMDA-64.2 certified reference materials. The method was successfully applied for water and fertiliser samples.