Simultaneous spectrophotometric determination of nickel and iron in copper-base alloy with bromo-PADAP

The reaction of nickel (II) with Br-PADAP, in the presence of tergitol NPX surfactant, forms a complex with absorption peaks at 520 and 560 nm. The iron(II)-Br-PADAP system at the same conditions forms a chelate with absorption peaks at 560 and 748 nm. This allows the simultaneous spectrophotometric determination of nickel and iron by measuring the absorbance at 560 and 748 nm. The proposed method, at ph 4.0-5.7, shows a molar absorptivity of 1.22 x 10(5)l . mole(-1) . cm(-1) for nickel at 560 nm and 8.20 x 10(4)l . mole(-1) . cm(-1) at 560 nm and 3.35 x 10(4)l . mole(-1) . cm(-1) at 748 nm for iron(II). Beer's law is obeyed up to 0.40 mu/ml of nickel(II) and up to 0.65 mu/ml of iron(II). Thiosulphate as masking agent allows the simultaneous determination of iron and nickel in the presence of high concentrations of copper. The ethylene glycol 2-(2-amino-ethyl) tetracetic acid provides the elimination of many other interferences. The method has been applied successfully to the simultaneous determination of nickel and iron in reference samples.     

Spectrophotometric determination of nickel after separation by adsorption of its alpha-furildioxime complex on naphthalene

A new method is proposed for collecting traces of nickel from aqueous solution by precipitation as the alpha-furildioxime complex and adsorption of this onto microcrystalline naphthalene. The precipitate is collected, dried, and dissolved in chloroform, and the nickel is determined spectrophotometrically at 438 nm. The linear calibration range is 2-35 mug/10 ml. The molar absorptivity is 1.6 x 10(4) l. mole(-1). cm(-1). The main advantage is that the nickel is collected quantitatively after only a few seconds'shaking. The effect of varying pH, amount of reagent, naphthalene or buffer, shaking and standing time, and interferences have been investigated.     

Spectrophotometric determination of nickel with p-acetylarsenazo

A spectrophotometric method for the determination of trace amounts of nickel is described. At pH 6, nickel reacts with p-acetylarsenazo to form a 1:2 coloured complex with an absorption maximum at 630 nm. The apparent molar absorptivity is 6.5 x 10(4) l.mol(-1) . cm(-1) . Beer's law is obeyed over the concentration range of 0-0.8 microg/ml. The proposed method is selective, sensitive and can be applied to the determination of nickel in aluminum alloy.     

Chemical reduction and spectrophotometric determination of silver, copper and nickel

Silver(I), copper(II) and nickel(II) can be reduced to the metallic state by formaldehyde at pH 11, chromium(II) in 2.5M sulphuric acid, and borohydride at pH 5.5-6.0, respectively. Reoxidation of these metals with iron(III) in the presence of Ferrozine enables their determination at concentration below 1 mug/ml by measurement of the absorbance of the iron(II)-Ferrozine complex at 562 nm, with a precision better than 3%. The apparent molar absorptivities for silver, copper and nickel are 2.78 x 10(4), 5.56 x 10(4) and 5.58 x 10(4) l.mole(-1).cm(-1), respectively. The average thickness of silver films on glass surfaces can be determined in the way.     

Spectrophotometric determination of nickel in copper-base alloy with 2-(2-thiazolylazo)-p-cresol

A spectrophotometric method for determination of nickel in copper-base alloy with 2-(2-thiazolylazo)-p-cresol (TAC) is described. The interferences of foreign ions can be eliminated by masking with a mixture of sodium tartrate and sodium thiosulphate. The nickel-TAC complex has low solubility in water, but is soluble in aqueous ethanol. Beer's law is obeyed for 20-70mug of nickel in 50 ml of solution, at pH 5.7. The molar absorptivity at 580 nm is 2.6 x 10(4)l.mole(-1).cm(-1). The method has been applied successfully to determination of nickel in reference samples.     

Determination of nickel with 2-(2-quinolylazo)-5-diethylaminoaniline as a chromogenic reagent.

A sensitive, selective and rapid method for the determination of nickel based on a rapid reaction of nickel(II) with 2-(2-quinolylazo)-5-diethylaminoaniline (QADEAA) has been developed. In the presence of pH = 6.0 ammonia-ammonium chloride buffer solution and sodium dodecyl sulfonate (SDS) medium, QADEAA reacts with nickel to form a violet complex having a molar ratio of 1:2 (nickel to QADEAA). The molar absorptivity of the complex is 1.38 x 10(5) l mol(-1) cm(-1) at 595 nm. Beer's law is obeyed in the range of 0.01-0.4 microg/ml. This method had been applied to the determination of nickel with good results.     

Interaction of nickel with 4-(2'-benzothiazolylazo) salicylic acid (BTAS) and simultaneous first-derivative spectrophotometric determination of nickel(II) and iron(III)

The solution properties of nickel complex with 4-(2'-benzo-thiazolylazo) salicylic acid (BTAS) have been studied by zero-order absorption spectrophotometry in 40% (v/v) ethanol at 20 degrees C and an ionic strength of 0.1 mol dm(-3) (KNO(3)). The equilibria that exist in solution were established and the basic characteristics of complexes formed were determined. A new direct spectrophotometric method for the determination of trace amounts of the nickel is proposed based on the formation of the Ni (BTAS) complex at pH 7.0. The absorption maximum, molar absorbtivity, and Sandell's sensitivity of 1:1 (M:L) complex are 525 nm, 0.6 x 10(4) l mol(-1) cm(-1) and 2.824 x 10(-9) microg cm(-2), respectively. The use of first-derivative spectrophotometry eliminates the interference of iron and enables the simultaneous determination of nickel and iron using BTAS. Quantitative determination of Ni(II) and Fe(III) is possible in the range (0.59-7.08) and (2.1-8.4) microg ml(-1), respectively with a relative standard deviation of 0.5%. The proposed method has been successfully applied to the simultaneous spectrophotometric determination of nickel and iron in steel alloys and aluminum alloys.     

Rapid and selective method for the spectrophotometric determination of nickel naphthenate in gasoline in a microemulsion

A new method for the spectrophotometric determination of nickel naphthenate in gasoline in a microemulsion was developed. PAN reacts with nickel(II) forming a red complex with composition 1:2 (metal to ligand) nickel(II)-PAN and absorption maximum at 568 nm. Nickel naphthenate in gasoline can be determined with PAN in a microemulsion, in the pH range 3.0 approximately 10.0 with a molar absorptivity of 4.8x10(4) l mol(-1) cm(-1). Beer's law was obeyed up to 0.8 mg l(-1) of nickel(II) in the microemulsion system. The interference of Cu(2+), Fe(3+), Mn(2+), Pb(2+) and Zn(2+) can be eliminated by adding 0.5 ml of a mixed masking agent. The method is rapid, simple and highly selective.     

Manual and fia methods for the determination of cadmium with malachite green and iodide

A sensitive and rapid spectrophotometric method for the determination of cadmium is described, based on the formation of a blue complex at pH 4 between the anionic iodide complex of cadmium(II) and Malachite Green; the colour is stabilized with poly(vinyl alcohol). The calibration graph for measurement at 685 nm is linear over the range 1-50 mug of cadmium per 25 ml of final solution, with a relative standard deviation of +/-1.7% for 1 mug/ml cadmium. The molar absorptivity is 6.1 x 10(4) 1.mole(-1).cm(-1). The method can be successfully adapted for FIA, the peak height being proportional to the cadmium concentration over the range 0.1-3 mug/ml; a two-channel manifold is used and an improvement in selectivity is obtained. The use of a gradient tube is demonstrated to give a good calibration for Cd(II) over the range 2 x 10(-2) -2 x 10(-6)M.     

Quinoline-2-aldehyde thiosemicarbazone (QAT) as spectrophotometric reagent for palladium and nickel

A procedure is described for the extractive spectrophotometric determination of nickel and palladium with quinoline-2-aldehyde thiosemicarbazone. At pH 7.5 nickel forms a 1:2 complex which is soluble in chloroform and has an absorption maximum at 460 nm. Palladium forms a 1:2 complex with maximum absorbance at 510 nm which can be extracted into MIBK from 1M HCl. Both complexes are stable and conform to Beer's law. The molar absorptivities for nickel and palladium are 1.58 x 10(4) and 2.6 x 10(3) 1.mole(-1). cm(-1) respectively. The proposed method is suitable for detection and determination of nickel and palladium in the presence of associated metal ions. The results of the analysis of synthetic mixtures and standard samples are reported.     

Extraction and spectrophotometric determination of cobalt with dithizone

Cobalt(II) in acetate-tartrate buffer (pH 6.0-7.3) is extracted quantitatively as cobalt(III) dithizonate with excess of dithizone in CCl(4). The molar absorptivity in the CCl(4) phase is 4.6 x 10(4) 1.mole(-1).cm(-1) at the absorption maximum 550 nm. The calibration graph is linear for 1-10 mug of cobalt in 10 ml of CCl(4) when excess of dithizone is removed by back-extraction with 0.01M aqueous ammonia. Most interferences can be overcome by (a) initial extraction with dithizone at pH 1.3, (b) selective back-extraction into hydrochloric acid (pH 1 to 2), (c) oxidation of iron and tin to iron(III) and tin(IV) and addition of fluoride to complex the former, and (d) selective reaction of nickel dithizonate with 1,10-phenanthroline in the CCl(4) phase followed by back-extraction of nickel into 0.1M acid. The method has been applied to determination of cobalt in a copper-nickel-zinc alloy and a nimonic alloy.     

Preconcentration of trace nickel with the ion pair of disodium 1-nitroso-2-naphthol-3,6-disulfonate and tetradecyldimethylbenzylammonium chloride on microcrystalline naphthalene or by the column method and determination by third derivative spectrophotometry

Nickel is quantitatively retained by disodium 1-nitroso-2-naphthol-3,6-disulfonate (nitroso-R salt) and tetradecyldimethylbenzylammonium chloride (TDBA(+)Cl(-)) on microcrystalline naphthalene in the pH range 5.4-12.1 from large volumes of aqueous solutions of various alloys and biological samples. After filtration, the solid mass consisting of the nickel complex and naphthalene was dissolved with 5 ml of dimethylformamide (DMF) and the metal was determined by third derivative spectrophotometry. Nickel complex can alternatively be quantitatively adsorbed on tetradecyldimethylbenzylammonium-naphthalene adsorbent packed in a column and determined similarly. The detection limit is 10 ppb (signal to noise ratio 2) and the calibration curve is linear from 30 to 5.4x10(3) ppb in dimethylformamide solution with a correlation coefficient of 0.9997 by measuring the distance d(3)A/dlambda(3) between lambda(1) (537 nm) and lambda(2) (507 nm). Eight replicated determinations of 2.5 mug of nickel in 5 ml of dimethylformamide solution gave a mean intensity (peak-to-peak signal between lambda(1) and lambda(2)) of 0.339 with a relative standard deviation of +/-0.87%. The sensitivity of the method is 0.677 ml/mug found from the slope (d(3)A/dnm(3)) of the calibration curve. Various parameters such as the effect of pH, volume of aqueous phase and interference of a number of metal ions on the determination of nickel has been studied in detail to optimize the conditions for nickel determination in various alloys and biological samples.     

Spectrophotometric studies on the complexation equilibria of Ni and Pb with 2-carboxy-2-hydroxy-5'-sulfo-formazylbenzene. Simultaneous determination of trace amounts of Ni and Pb

Spectrophotometric studies have been made to investigate the reaction of Nickel and Lead with 2-carboxy-2'-hydroxy-5'-sulfoformazyl-benzene (zincon) in 50%(v/v) ethanol-water at 25 degrees C and an ionic strength of 0.1 M NaClO4. A complete picture of the complexation equilibria in the pH range (4.2-12.0) for nickel and (1.9-11.5) for lead are presented. Simple, rapid, selective and sensitive methods for the spectro-photometric determination of nickel and lead has been developed based on the color reaction of their complexes with zincon. The methods allow the determination of 4.69 microg mL(-1) of nickel at pH = 6.3 (lambdamax = 665 nm) and 10.3 microg ml(-1) of lead at pH = 5.6 (lambdamax = 610 nm). The apparent molar absorptivities were epsilon = 1.3 x 10(4) L mol(-1) cm(-1) for nickel and epsilon = 0.6 x 10(4) L mol(-1) cm(-1) for lead. The interference of a large number of foreign ions and complexing agents has been studied. Thiosulphate, as masking agent allows the simultaneous determination of nickel and lead in the presence of high concentrations of copper. Ascorbic acid, sodium cyanide and or sodium fluoride provide the elimination of many other interferences. The methods have been applied successfully to the simultaneous determination of nickel and lead in an aluminium and non-ferrous alloy.     

Sequential extraction and determination of copper and nickel with 2,4-dihydroxyacetophenone thiosemicarbazone

2,4-Dihydroxyacetophenone thiosemicarbazone (DAPT) forms a 1:1 complex with copper(II) which can be extracted into n-butanol or ethyl acetate from acetic acid-sodium acetate (pH 5.0) buffer, and a 1:1 nickel(II) complex which can be extracted into n-butanol from ammonium chloride-ammonia (pH 7.5) buffer. The difference between the pH(1 2 ) values for extraction of the two complexes is 3.4 and this has been exploited for their sequential extraction and determination. The molar absorptivities for the copper and nickel complexes are 1.5 x 10(4)l.mole(-1).cm(-1) at 390 nm and 8.2 x 10(3)l.mole(-1).cm(-1) at 385 nm respectively. The procedure has been applied to the analysis of cupronickel.     

Flow-injection chemiluminescence determination of ofloxacin and levofloxacin in pharmaceutical preparations and biological fluids.

A novel, rapid and sensitive analytical method is described for determination of ofloxacin and levofloxacin by enhanced chemiluminescence (CL) with flow-injection sampling. The method is based on the CL reaction of the Ce(IV)-Na2S2O4-ofloxacin/levofloxacin-H2SO2 system. The enhanced CL mechanism was developed and the optimum conditions for CL emission were investigated. The CL intensity was correlated linearly (r = 0.9988) with the concentration of ofloxacin (or levofloxacin) in the range of 1.0 x 10(-8) - 1.0 x 10(-7) g ml(-1) and 1.0 x 10(-7) - 6.0 x 10(-6) g ml(-1). The detection limit (S/N = 3) is 7 x 10(-9) g ml(-1). The relative standard derivation (RSD, n = 11) is 2.0% for ofloxacin at 4 x 10(-7) g ml(-1) and for levofloxacin at 6 x 10(-7) g ml(-1). This method has been successfully applied for the determination of ofloxacin and levofloxacin in pharmaceutical preparations and biological fluids with satisfactory results.     

Spectrophotometric determination of osmium with 1-phenyl-4,4,6-trimethyl-(1H,4H)-2-pyrimidinethiol and extraction into molten naphthalene

Conditions have been developed for the spectrophotometric determination of osmium with 1-phenyl-4,4,6-trimethyl-(1H,4H)-2-pyrimidinethiol after extraction of the complex into molten naphthalene. Beer's law holds for the concentration range of 4-77 mug of osmium in 10 ml of the final solution. The molar absorptivity is 1.33 x 10(4) l.mole(-1).cm(-1). The reagent is highly selective for osmium.     

Spectrophotometric and atomic absorption determination of ramipril, enalapril maleate and fosinopril through ternary complex formation with molybdenum (V)-thiocyanate (Mo(V)-SCN)

Three different sensitive and accurate spectroscopic procedures were developed for the determination of three angiotensin-converting enzyme inhibitors, namely, ramipril, enalapril maleate and fosinopril. The first two spectrophotometric (extractive and non-extractive) procedures were based on ternary complex formation with molybdenum(V) thiocyanate. The formed complex can be determined by extraction with chloroform measured at lambdamax 517 nm Beer's law was obeyed in the concentration range from (10--90 microg ml(-1)) for ramipril and fosinopril and (4--36 microg ml(-1)) for enalapril maleate with molar absorptivity 1.2x10(4), 2x10(4) and 3.4x10(4) l mol(-1) cm(-1), respectively, or by direct measurement after addition of benzalkonium chloride as surfactant and measuring the formed ternary complex at lambdamax 545 nm with a linear relationship in the concentration range from (8-7-2 microg ml(-1)), (3--27 microg ml(-1)) and (8--72 microg ml(-1)) for ramipril, enalapril maleate and fosinopril with molar absorptivity 1.5x10(4), 5x10(4) and 2.1x10(4) l mol(-1) cm(-1), respectively. The third procedure is atomic absorption measurement through the quantitative determination of molybdenum content of the complex. These methods hold their accuracy and precision well when applied to the determination of ramipril, enalapril maleate and fosinopril in their dosage forms.     

Analysis of metals by solid-liquid separation after liquid-liquid extraction spectrophotometric determination of palladium(II) by extraction of palladium dimethylglyoximate with melted naphthalene

A method of liquid-liquid extraction of palladium di-methylglyoximate with molten naphthalene followed by solid-liquid separation is successfully applied to palladium. The complex between palladium and dimethylglyoxime is easily extracted into molten naphthalene. After extraction, the very fine solidified naphthalene crystals are dissolved in chloroform, and the absorbance of the resultant solution is measured at 370 nm against a reagent blank. Beer's law is obeyed for 30-370 mug of palladium in 10 ml of chloroform, and the molar absorptivity is calculated to be 1.72 x 10(4) l.mole.(-1)mm(-1). Various alkali metal salts and metal ions do not interfere. The interference of nickel(II) is overcome by the extraction at pH 2, and that of iron(III) by masking with EDTA or by reduction to iron(II). The method is rapid and accurate.     

Studies on the behaviour of beta-ethylthioethylenethioglycollate in aqueous Ni(II) and Cu(II) solutions

The stability constants of the 1:1 and 1:2 complexes of nickel and copper(II) with beta-ethylthioethylenethioglycollic acid have been determined at 25 degrees at ionic strength 1.0 (NaClO(4)). The values for the nickel complexes are K(1) = 1.11 +/- 0.06 x 10(2) (spectrophotometrically) or 1.25 +/- 0.11 x 10(2) (potentiometrically) and K(2) = 3.04 +/- 0.24 x 10(2) (potentiometrically). The corresponding values for the copper complexes are K(1) = 1.27 +/- 0.02 x 10(3) or 1.28 +/- 0.03 x 10(3) and K(2) = 7.29 +/- 0.30 x 10(2).     

Spectrophotometric determination of indium in nickel alloys and zinc ores with 1-(2-pyridylmethylideneamine)-3-(salicylideneamine)thiourea

A sensitive method for the spectrophotometric determination of indium with 1-(2-pyridylmethylideneamine)-3-(salicylideneamine)thiourea is proposed. A yellow complex is formed at pH 4.5 (succinate buffer) in a medium containing 40% dimethylformamide, and the absorbance is measured at 415 nm. The molar absorptivity is 6.2 x 10(4)l.mole(-1).cm(-1). The relative standard deviation of the procedure is 1.5%. The method has been applied to determination of indium in a nickel alloy and three zinc ores, with prior isolation of indium by co-precipitation with ammonia and extraction into n-butyl acetate from 5M hydrobromic acid.