Sequential and rapid determination of Po-210, Bi-210 and Pb-210 in natural waters

A sequential and rapid separation method for the determination of radon daughter nuclides, Pb-210, Bi-210 and Po-210 has been developed for application to natural waters. Rapid separation is attained by the use of the same hydrochloric acid solution. After isolation of the three radionuclides from the sample by co-precipitation with added Fe³⁺, polonium isotopes are first spontaneously deposited onto a silver disc from a 0.5N hydrochloric acid solution. Next, bismuth isotopes are electrodeposited onto a platinum net cathode coupled with a platinum coil anode at 1.2 V. Finally, lead isotopes are electrodeposited onto a platinum net cathode at 1.8 V from the remaining solution by adding hydroxylamine hydrochloride as an anodic depolarizer. This method can be applied to meteorological precipitation samples where these three nuclides are separated within 10 hr after the sampling with chemical yields of more than 80% for Po-210 and Bi-210 and more than 70% for Pb-210. This method is applicable to other environmental water samples.     

An efficient quantitative technique for the simultaneous analyses of radon daughters (210)Pb, (210)Bi and (210)Po

An improved and time efficient technique has been developed for quantitative determination of the long-lived (222)Rn daughters ((210)Pb, (210)Po and (210)Bi) in atmospheric and oceanic samples. The sample is first spiked with yield tracers for polonium (208 or 209), bismuth (207), and lead (stable lead carrier). These nuclides may then be scavenged through iron hydroxide precipitation and redissolved in a dilute (pH approximately 2) nitric acid plating medium with citrate and hydroxylamine hydrochloride at 90 degrees centrigrade with constant stirring. First a silver planchet is suspended in the solution which plates polonium to high efficiency. Second, a nickel planchet is suspended in the same solution which is maintained hermetic (e.g. bubbling with helium) and bismuth is plated next with high efficiency. Third, lead is purified from the same solution using anion exchange techniques and isolated for beta counting as the sulfate. Polonium is analyzed by isotope dilution alpha spectrometry. Bismuth and lead are analyzed by anti-coincident beta counting in a low level shield. In the case of bismuth, the 207 tracer is added in quantities at least comparable to the background of the beta system such that counting before and after the decay of (210)Bi gives the bismuth yield. The unique characteristics of this technique are its speed and efficiency; all three radon daughters can be isolated for counting within 4 hr of pre-treating the sample. The remaining solution can be treated subsequently for other analyses as appropriate.     

Separation of the radioelements210Pb−210Bi−210Po by spontaneous deposition onto noble metals and verification by Cherenkov and liquid scintillation counting

A method for the separation of²¹⁰Pb,²¹⁰Bi and²¹⁰Po using spontaneous deposition has been developed. The²¹⁰Bi and²¹⁰Po are simultaneously removed by deposition onto nickel foil (copper and tin could also be used but less effectively) while the²¹⁰Po is separated from²¹⁰Bi, after dissolution of the nickel foil, by deposition onto silver foil. The effectiveness of each separation was evaluated by adding aliquot portions of each solution to a cocktail and counting with a liquid scintillation counter. Water was used as the medium to observe the Cherenkov count of the sample solution.     

Radiochemical determination of210Po and210Pb in water

A method for²¹⁰Po and²¹⁰Pb determination in water samples is described. The nuclides are concentrated, in presence of added²⁰⁸Po and lead carrier, by evaporation. Then the polonium is plated electroless from the acidic solution on a copper planchet and measured by alpha spectrometry.²¹⁰Pb separation from the other isotopes is based on the solutility of PbSO₄ in citrate.²¹⁰Pb content is determined by measuring the activity of its daughter²¹⁰Bi. The critical steps in the isolation of lead have been examined and discussed.     

210Pb(210Po) speciation of aquatic deposits: Refinement and utility

A refined chemical procedure for speciation studies of sediments has been thoroughly examined. The suggested method, although only tested on²¹⁰Pb (²¹⁰Po), could be applied to other chemical species, especially heavy metals and radioactive nuclides. Successive dissolutions using dilute HC1 (1–2.5%) and NaOH (0.5–1%) proved that the geochemistry of fulvic, humic, and mineral compounds plays an important role in the mobility, transport, and accumulation of²¹⁰Pb in various aquatic systems. This work demonstrates that²¹⁰Pb, as well as analogous isotopes and metals-based dating and tracing applications, could be further improved and extended using proper speciation techniques. The procedure given here allows not only evaluation of supported and unsupported²¹⁰Pb but also the resolution of anomalies in modelling biogeochemical cycles.Supported by the Swedish Natural Science Council and the Spanish CICYT contract PB86-0207.     

Cascade ultrafiltering of 210Pb and 210Po in freshwater using a tangential flow filtering system</p> </p>

Summary A rapid method was developed using ultrafilters with a tangential flow filtering system for molecular size separation of naturally occurring ²¹⁰Pb and ²¹⁰Po in a freshwater sample. Generally, ultrafiltering of a large volume water sample for measuring the nuclides was too time consuming and not practical. The tangential flow filtering system made the filtering time short enough to adapt for in-situ ultrafiltering the large volume sample. In this method, a 20 liter water sample was at first passed through the 0.45mm pore size membrane filter immediately after sample collection to obtain suspended particle matter [>0.45mm particulate fraction (PRT)]. Two ultrafilters (Millipore Pellicon 2^ò) were used sequentially. The nuclides in the filtrate were separated into three fractions: high molecular mass (100 kDa-0.45mm; HMM), low molecular mass (10 k-100 kDa; LMM) and ionic (<10 kDa; INC) fractions. It took 80 minutes to process the sample after collection. The cut-off molecular size of each ultrafilter was confirmed by size exclusion chromatographs (SEC) of the LMN and the HMM fractions. Adsorption of the nuclides and organic compounds in the sample onto the ultrafilters was negligibly small. Good reproducibility of the nuclide concentrations in each fraction was confirmed by repeated experiments. The method was successfully applied to obtaine the molecular size distributions of ²¹⁰Pb and ²¹⁰Po in an oligotrophic lake, Lake Towada located in the northern area of Japan.</p> </p>     

Simultaneous determination of210Bi and210Po on pine needles by solvent extraction and liquid scintillation counting

A determination procedure has been developed for²¹⁰Bi and²¹⁰Po in environmental samples and was applied for pine needles. Bismuth-210 and²¹⁰Po separated from the parent nuclide²¹⁰Pb as BiOCl precipitate were extracted simultaneously by TOPO/toluene containing PPO and POPOP. The separation of²¹⁰Bi and²¹⁰Po from²¹⁰Pb was almost satisfactory. The activity of²¹⁰Bi+²¹⁰Po in the TOPO/toluene was measured periodically by liquid scintillation counting for about 20 days after separation. The time course of the decreasing pattern of the activity was determined by the initial activity ratio²¹⁰Po/²¹⁰Bi. The decreasing pattern of the activity was compared with theoretical patterns, and best estimates for²¹⁰Po and²¹⁰Bi were obtained by non-linear least-squares fitting. The activities of²¹⁰Bi and²¹⁰Po were determined for one-year and two-year old pine needles fro the same pine tree, and weathering half-time and deposition rate of these nuclides was discussed.     

Analysis of 210Pb and 210Po in Brazilian foods and diets

Radiochemical procedures for the analysis of ²¹⁰ Pb and ²¹⁰ Po in foods and diets are presented. Because of the low beta energy of ²¹⁰ Pb, its analysis was based on a separation of the daughter radionuclide ²¹⁰ Bi by precipitation of lead sulphate, ²¹⁰ Bi ingrowing and beta counting of this nuclide. ²¹⁰ Po analysis was based on wet dissolution of the sample, deposition onto silver disc and counting by alpha-spectrometry. Levels of these radionuclides in individual items and diets of selected university students were determined in order to evaluate the intakes of ²¹⁰ Pb and ²¹⁰ Po as well as the dose due to ingestion of foods and diets in São Paulo city.     

The role of Cherenkov and liquid scintilation counting in evaluating the anion-exchange separation of210Pb−210Bi−210Po

Using as eluent a sequence of 3M HCl, 12M HCl, and 8M HNO₃, a mixture of²¹⁰Pb,²¹⁰Bi, and²¹⁰Po may be clearly separated on a column of Dowex 1×2−100 anion exchange resin. A Cherenkov count in H₂O and the variation in count rate with time confirm that the nuclides emerge in the order²¹⁰Pb→²¹⁰Bi→²¹⁰Po. If 12M HCl is replaced by 1.5M H₂SO₄/2.3 M Na₂SO₄, a clean separation also results, but recovery of²¹⁰Po becomes considerably more difficult. All three nuclides are readily detectable by liquid scintillation counting, with the efficiency for²¹⁰Pb in the 60–70% range. The Cherenkov aqueous counting efficiency for²¹⁰Bi is ∼14–15%.     

210Po、210Bi和210Pb测试技术研究进展与现状

铀系核素210Po、210Bi和210Pb的测试在铀矿地质勘查与核废物安全处置研究、沉积年代学与同位素地球化学研究、大气环境学与辐射卫生学研究等诸多领域具有重要意义。重点总结了近些年来210Pb、210Bi和210Po三核素各种测试技术的研究进展与现状,评述了存在的主要问题及未来发展趋势。     

A simultaneous determination of lead-210 and polonium-210 in sea water

A new radiochemical procedure is described for the determination of lead-210 and polonium-210 in sea water. These nuclides are concentrated by coprecipitation with calcium carbonate from a sea water sample of large volume and then separated from calcium by formation of the hydroxides. Polonium-210 is deposited spontaneously onto a silver disc and determined by an α-counting technique. Lead-210 is also determined by counting the activity of polonium-210 produced during storage for 3 months.     

Measurement of lead-210, bismuth-210, and polonium-210 in environmental samples

Mathematical equations governing the ratio of²¹⁰Bi/²¹⁰Pb and²¹⁰Po/²¹⁰Pb activities are used to explain the ingrowth of²¹⁰Bi and²¹⁰Po in environmental samples during post collection. Procedures are described for radiochemical separation of²¹⁰Pb,²¹⁰Bi, and²¹⁰Po in a state of radioactive disequilibrium and quantification by alpha- and beta-counting. Also, the special case is considered where²¹⁰Bi is in equilibrium with²¹⁰Pb, but both are in disequilibrium with²¹⁰Po. In this case, the activities of both²¹⁰Pb and²¹⁰Po are computed by measuring²¹⁰Po activity twice, using alpha-counting.     

Presence and forms of210Pb,210Bi and210Po in ground level aerosols

A scheme of fractionation of²¹⁰Pb,²¹⁰Bi,²¹⁰Po forms present in air aerosols based on the combination of methods of radiochemical analysis and radiometric deteemination with leaching by different agents has been developed. The ratio between the²¹⁰Pb,²¹⁰Bi,²¹⁰Po present in the aerosol samples was determined experimentally. Carbonate of²¹⁰Pb, and²¹⁰Po and²¹⁰Bi forms connected with oxides prevai in the aerosol component of atmospheric air.     

Auto-deposition of 210Bi and 210Po on nickel discs and their application in the analysis of natural waters

Journal of Radioanalytical and Nuclear Chemistry - This study presents a time-efficient method of analysing 210Pb, 210Bi, and 210Po in natural waters. The optimum pH (1.00), temperature...     

Optimization of a single-drop microextraction method for multielemental determination by electrothermal vaporization inductively coupled plasma mass spectrometry following in situ vapor generation

A headspace single-drop microextraction (HS-SDME) method has been developed in combination with electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS) for the simultaneous determination of As, Sb, Bi, Pb, Sn and Hg in aqueous solutions. Vapor generation is carried out in a 40 mL volume closed-vial containing a solution with the target analytes in hydrochloric acid and potassium ferricyanide medium. Hydrides (As, Sb, Bi, Pb, Sn) and Hg vapor are trapped onto an aqueous single drop (3 µL volume) containing Pd(II), followed by the subsequent injection in the ETV. Experimental variables such as medium composition, sodium tetrahydroborate (III) volume and concentration, stirring rate, extraction time, sample volume, ascorbic acid concentration and palladium amount in the drop were fully optimized. The limits of detection (LOD) (3σ criterion) of the proposed method for As, Sb, Bi, Pb, Sn and Hg were 0.2, 0.04, 0.01, 0.07, 0.09 and 0.8 µg/L, respectively. Enrichment factors of 9, 85, 138, 130, 37 and 72 for As, Sb, Bi, Pb, Sn and Hg, respectively, were achieved in 210 s. The relative standard deviations (N = 5) ranged from 4 to 8%. The proposed HS-SDME-ETV-ICP-MS method has been applied for the determination of As, Sb, Bi, Pb, Sn and Hg in NWRI TM-28.3 certified reference material.     

Determination of 210Pb, 210Bi and 210Po in natural drinking water

A new method for the radioanalytical determination of the ²²²Rn progenies ²¹⁰Pb, ²¹⁰Bi and ²¹⁰Powill be presented, which has been improved for analyses of water samples fromdifferent regions in Austria. 1–2 liter samples were taken in polyethylenebottles prefilled with conc. HNO₃ to obtain 0.2M acidic solutions,thus avoiding adsorption effects. After adding 1.6 mg of inactive lead carrier,the water sample was evaporated to dryness, converted to the chloride formand dissolved in 1M HCl.     

Total deposition velocities and scavenging ratios of 7Be and 210Pb at Rokkasho, Japan

The atmospheric concentrations and deposition fluxes of ⁷Be and ²¹⁰Pb were observed biweekly in Rokkasho, Japan on the Pacific Ocean coast at the northern end of Honshu Island, from March 2000 to March 2006, to clarify their regional features. Seasonal variation pattern of atmospheric ⁷Be concentrations had double peaks, and that of ²¹⁰Pb had a single peak. Deposition fluxes of ⁷Be and ²¹⁰Pb showed the same patterns. The total deposition pattern of ⁷Be was similar to that commonly seen on the Pacific Ocean side of northern Honshu Island, while the pattern of ²¹⁰Pb was similar to that commonly seen on the Japan Sea side. The lack of high spine mountains windward in Rokkasho may be the cause of this ambiguity in the winter monsoon season. Total deposition velocities and scavenging ratios of ²¹⁰Pb were similar to those of ⁷Be from spring to fall, and showed that both nuclides had a similar removal process from the atmosphere. However, the scavenging ratios of ²¹⁰Pb were slightly larger than those of ⁷Be in winter, indicating different behaviors for both nuclides in the scavenging process. The scavenging ratios of both nuclides inversely correlated with precipitation rate, and the ratios in winter were larger than in the other seasons.     

Determination of environmental actinide nuclides and210Pb(210Po) by low-energy photon spectrometry with alpha-spectrometry

Low-energy photon spectrometry with -spectrometry was used to determine the environmental concentrations of low-level actinides and other nuclides, especially²¹⁰Pb and²¹⁰Po. The isotopic ratio of²⁴⁰Pu/²³⁹Pu was successfully determined by measuring L_x-ray/-ray counting ratio. A reliable method has been developed for the determination of extremely low-level²³⁷Np global fallout in environmental samples. The non-destructive determination by Ge-LEPS for natural²¹⁰Pb in various samples (tobacco leaves, commercially available tobacco, etc.) was also carried out with the determination of²¹⁰Po by -spectrometry using²⁰⁹Po as a yield tracer.     

Separation of carrier-free210Bi and UX1 from210Pb and U,respectively, using silica gel as ion exchanger

Radiochemical separations of carrier-free²¹⁰Bi and UX₁ activities from²¹⁰Pb and U, respectively, have been carried out using a silica gel column.²¹⁰Pb was adsorbed in the column as molybdate and²¹⁰Bi passed unadsorbed. Lead activity was next removed with 25 ml of 0.1 M HNO₃. In the case of separation of UX₁, the coloured carbonate complex of U was removed from the silica surface by washing with saturated sodium carbonate solution, keeping UX₁ retained, and finally UX₁ was washed out with 25 ml of conc. HNO₃. Studies of the beta decay of²¹⁰Bi and the γ-spectrum analysis of UX₁ has shown that the separated products in both cases are of high radiochemical purity. The processes in each case took less than one hour and the yield was satisfactory.