An application of bis[2-(5-chloro-2-pyridylazo)- 5-diethylaminophenolato]cobalt(III) chloride to the extraction and spectrophotometric determination of sulphonated and sulphated surfactants

Bis[2-(5-chloro-2-pyridylazo)-5-diethylaminophenolato]cobalt(III) is proposed for the extraction and spectrophotometric determination of sulphated and sulphonated surfactants. The complex and the surfactants form ion-pairs which are extracted into benzene from O.1M hydrochloric acid. The absorbance of the benzene phase is measured at 560 nm against a reagent blank. Less than 25 mug of sodium di-(2-ethylhexyl) sulphosuccinate in 50-200 ml of sample solution is determined reproducibly by the proposed method. When applied to river water samples, the proposed method gives results which agree very well with those obtained by the standard Methylene Blue method. However, the proposed method is simpler and more sensitive than the Methylene Blue method.     

Visual colorimetry for trace antimony(V) by ion-pair solid-phase extraction with bis[2-(5-chloro-2-pyridylazo)-5-diethylaminophenolato]cobalt(III) on a PTFE type membrane filter.

A new visual colorimetry for trace antimony(V) based on ion-pair solid-phase extraction to a PTFE-type membrane filter with bis[2-(5-chloro-2-pyridylazo)-5-diethylaminophenolato]cobalt(III) ion ([Co(5-Cl-PADAP)(2)](+)) has been developed. Experiments showed that hexachloroantimonate(V) ion (SbCl(6)(-)) was adsorbed with [Co(5-Cl-PADAP)(2)](+) to the front surface of the PTFE filter. The adsorption of antimony(V) ion was promoted by the addition of lithium chloride as a source of chloride ion. The excess reagent of [Co(5-Cl-PADAP)(2)](+) was eluted by rinsing with a 10 wt% methanol aqueous solution. In this case, the slow rate of the hydrolysis reaction of SbCl(6)(-) and the difference of the hydrophobicity of the ion pairs were important for adsorption and separation with a PTFE-type membrane filter. The antimony(V) concentration was determined through a visual comparison with a standard series. The visual detection limit was 0.10 microg. The calibration curve assessed with the reflection spectrometric responses at 580 nm was linear in the concentration range of 0.10 - 1.2 microg (r = 0.996). The proposed method has been applied to the determination of sub-microgram levels of antimony(V) ion in water samples.     

Sensitive spectrophotometric determination of bismuth(III) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

The complex of the reagent 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) with Bi(III) has been studied. The composition and stability of this complex have been determined. An analytical method for the spectrophotometric determination of Bi(III) using its complex with 5-Br-PADAP has been developed. Variables influencing the method such as pH, wavelength, and time have been studied. The limitations of this method and the effect of interfering ions have been investigated. Comparison of this method with other methods cited in the literature for the determination of Bi(III) is also included.     

Sensitive spectrophotometric determination of vanadium with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol after extraction with N-benzoyl-N-phenylhydroxylamine

A selective and precise spectrophotometric determination of vanadium(V) is performed after preceding extraction with N-benzoyl-N-phenylhydroxylamine (BPHA). The color is developed in a water-ethanol solution with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl-DMPAP). The molar absorptivity at 588 nm is (6.57 ± 0.05) × 10⁴ L mol^–1 cm^–1 at pH 2.1. The method permits the determination of vanadium (V) at trace levels in the presence of large amounts of other ions. It is applied to the determination of vanadium in aluminium (analytical reagent grade) and in human hair. High accuracy and precision is obtained. Received: 18 April 1997 / Revised: 20 June 1997 / Accepted: 25 June 1997     

Sensitive spectrophotometric determination of vanadium with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol after extraction with N-benzoyl-N-phenylhydroxylamine

A selective and precise spectrophotometric determination of vanadium(V) is performed after preceding extraction with N-benzoyl-N-phenylhydroxylamine (BPHA). The color is developed in a water-ethanol solution with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl-DMPAP). The molar absorptivity at 588 nm is (6.57 ± 0.05) × 10⁴ L mol^–1 cm^–1 at pH 2.1. The method permits the determination of vanadium (V) at trace levels in the presence of large amounts of other ions. It is applied to the determination of vanadium in aluminium (analytical reagent grade) and in human hair. High accuracy and precision is obtained.     

Bis[2-(2-pyridilazo)-5-diethylaminophenolato] cobalt(III) chloride as a new extraction and spectrophotometric reagent for trace anions Determination of sulphated and sulphonated surfactants

The highly coloured bis[2-(2-pyridylazo-5-diethylaminophenolato] cobalt(III) ion, Co(PADAP)(+)(2), is proposed as a new counter-ion for use in the extraction and spectrophotometric determination of traces of colourless anions in water. Its application to the determination of sulphated and sulphonated surfactants is described. Beer's law is obeyed over a wide range and the detection limit is approximately 0.2 mug. Large amounts of diverse ions in common water samples do not interfere. The proposed method is simpler and more sensitive than the widely used Methylene Blue method.     

Silaned glass beads for the preconcentration and spectrophotometric determination of cobalt with 2-(2-pyridylazo)-5-diethylaminophenol

Silaned glass beads are applied for the preconcentration and spectrophotometric determination of cobalt with 2-(2-pyridylazo)-5-diethylaminophenol (PADAP). Traces of cobalt are collected as the coloured PADAP complex on a column of the beads, and the complex is then eluted with a small volume of ethanol-hydrochloric acid mixture and the absorbance of the eluate is measured at 575 nm. The cobalt can easily be concentrated by a factor of 50-500 in this way, and 0.1-2 mug of cobalt in 100 ml of sample solution can be determined reproducibly. High concentrations of Fe(III), Cr(III), Pb, Zn, Cu(II), Mn(II), Cd, Al, Ca and Mg can be tolerated but Pd(II) interferes.     

Rapid spectrophotometric determination of zirconium with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

Zirconium reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the pH range 3.8-5.8 to form a red chelate that is soluble in methanol-water mixtures. The absorbance of the 1:3 complex obeys Beer's law over the zirconium concentration range 0.02-0.44 mug/ml and has a molar absorptivity of 1.54 x 10(5) 1.mole(-1). cm(-1) at 585 nm. The formation constant is log beta(3) = 16.15. Of 59 species studied, only EDTA, Ga, In, Ti, Hf and V(V) interfere seriously.     

Sensitive spectrophotometric determination of La(III) with 1-(2-pyridylazo)-2-naphthol

A simple and sensitive method for spectrophotometric determination of lanthanum has been developed. At pH 9.6, in presence of 50% ethanol, lanthanum reacts with 1-(-2-pyridylazo)-2-naphthol (PAN) to form a red complex which has two absorption maxima, at 545 and 510 nm. The molar absorptivity at 545 nm is 0.55 × 10⁴ liters · mol^?1 cm^?1. On the other hand, lanthanum reacts with PAN in pure ethanol to form a red complex at 530 nm, with high molar absorptivity (8 × 10⁴ liters · mol^?1 cm^?1).     

Spectrophotometr1c determination of cadmium with 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol

The reaction between cadmium and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl DMPAP) in aqueous alcohol media at pH 8.8-10.7 results in an intense violet colour which is stable for at least 8 hr. The composition is 2:1 reagent:metal and the formation constant (5.29 +/- 0.01) x 10(18). Beer's law is obeyed up to 1.34 ppm of cadmium at 550 nm. The optimal concentration range (Ringbom) is between 0.16 and 0.72 ppm. The apparent molar absorptivity at 550 nm is (1.20 +/- 0.01) x 10(5) l.mole(-1). cm(-1), making the sensitivity one of the highest known. The interference due to copper(III), iron(III), cobalt(II), nickel(II), gold(III), zinc(II) and manganese(II) can be suppressed.     

Sensitive spectrophotometric determination of nickel(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A simple, selective and highly sensitive procedure for spectrophotometric determination of nickel has been developed. At pH 5.5, nickel reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in water-ethanol medium to form a red-violet complex which has two absorption maxima, at 520 and 56Onm. The molar absorptivity at 56Onm is 1.26 x 10(5) l.mole(-1).cm(-1). Beer's law is obeyed for 0-15 mug of nickel. Nickel in aluminium alloys and electroplating waste-water has been determined by this method.     

Selective spectrophotometric determination of thorium(IV) with 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol

A spectrophotometric study of the Th(IV) complex of a new reagent 2-(5-Bromo-2- pyridylazo)-5-diethylaminophenol (5-Br-PADAP) is presented. A reddish brown complex is formed at pH 4.86, and shows maximal absorbance at 580 nm with molar absorptivity of 1.66 × 10⁵ mol⁻¹ cm⁻¹ liter. Beer's law is obeyed over the range 0.0 to 15 μg of thorium. Rare earths ions like La³⁺, Ce³⁺, and Y³⁺ do not interfere because they form complexes with 5-Br-PADAP at higher pH's (>9.94) (1). A new method for determining trace amounts of thorium is proposed, which possesses the advantages of high sensitivity and selectivity.     

Sensitive spectrophotometric determination of vanadium with 2-(5-bromo-2-pyridylazo)-5-diethyl-aminophenol (5-Br-PADAP)

A new sensitive and highly selective method is described for the spectrophotometric determination of microgram amounts of vanadium(V). First, vanadium is isolated by extraction withN-benzoyl-N-phenylhydroxylamine (BPHA) in chloroform from about 4M hydrochloric acid medium. Then, chloroform is evaporated and the residue mineralized with mixture of cone. perchloric and nitric acid. Finally, a colour reaction of vanadium(V) separated with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) in an acetate buffer (pH 4.5) gives a molar absorptivity of 5.48×10⁴l·mol^–1·cm^–1 at 585 nm. The proposed method was applied for the determination of traces of vanadium in aluminium samples. The results obtained show a good precision and accuracy of the method.     

2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol as a reagent for the spectrophotometric determination of La(III), Y(III), and Ce(III)

The complexes of the reagent 5-Br-PADAP with the metal ions La(III), Ce(III), and Y(III) have been studied.The composition and stability of these complexes have been determined. A sensitive spectrophotometric procedure for the determination of the metal ions La(III), Ce(III), and Y(III) has been proposed. The limitations of this procedure and the effect of other ions have been studied.     

Characterization of complexes involved in the spectrophotometric determination of cobalt with 4-(2-pyridylazo)resorcinol

Complex species involved in the spectrophotometric determination of cobalt with 4-(2-pyridylazo)resorcinol (PAR = H₂R) were studied in solution and in the solid state. An anionic [Co(III)R₂]^- species was extracted from aqueous solution in chloroform by tetraphenylarsonium or tetraphenylphosphonium chloride. Stable tetraphenylarsonium and tetraphenylphosphonium salts of di-4-(2-pyridylazo)resorcinolo cobaltate(III) with the formula [(C₆H₅)₄X][Co(III)R₂] where X=As.P; and R=C₁₁H₇N₃O₂^2-, were isolated from the chloroform phase. The complexes were characterized by elemental analyses, visible, i.r., p.m.r., e.s.r. spectra, x-ray powder photographs, magnetic susceptibility and conductivity measurements. The spectral evidence and magnetic properties indicate a tridentate coordination of two 4-(2-pyridylazo) resorcinol dibasic anions, bonded to cobalt(III) in a symmetric arrangement with both azo groups coordinated to the cobalt atom through a single nitrogen lone pair.     

Synthesis of 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol and its application to the spectrophotometric determination of cobalt

2-(3,5-Dichloro-2-pyridylazo)-5-dimethylaminophenol (3,5-diCl-DMPAP) has been synthesized and its analytical application investigated. It reacts with cobalt in aqueous solution at pH 2.2-6.0 and room temperature to form a water-soluble ML(2) complex with absorption maximum at 590 nm, and molar absorptivity 8.4 x 10(4) l.mole(-1).cm(-1). Interference from other transition metals can be eliminated by their solvent extraction with 8-hydroxyquinoline. The method has been successfully applied to determination of cobalt in mild steels.     

Complexometric titration of Ti(IV) with 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol as indicator

A method for determination of titanium by a reverse titration with EDTA in the presence of hydrogen peroxide, with 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol as indicator, is presented; use of the method for analysis of titanium paints is also described.     

Spectrophotometric determination of vanadium in steel and alloys with 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol

Using spectrophotometric methods, the protopysis constant of the 5.ClDMPAP reagent (pK_a1 = −0.19; pK_a2 = 1.97; pK_a3 = 11.98) and the stability constant of its vanadic complex (6.0 ± 0.11) × 10¹⁴ were determined. A high-sensitivity spectrophotometric method was developed to determine V(V) using 0.1–1.2 ppm and pH = 3.8. ε₅₈₆ = 55,300 ± 400 liters · mol⁻¹ · cm⁻¹. A study on the most important interferences and the way to eliminate them was carried out. The method can be applied to the determination of the element in steels and ferrovanadiums.     

Spectrophotometric determination of gadolinium(III) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP)

Reaction between gadolinium(III) and 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5- Br-PADAP) was studied for delineating optimal conditions for complexation. This reagent can be used for the spectrophotometric determination of Gd(III) in concentrations ranging from 0.04 to 1.2 ppm (a = 1.76(+/- 0.03) x 10(5) (1.(-1) mole(-1). cm). The reaction takes place at a pH between 9.2 and 11.6. In the presence of Triton X-100 this complex is soluble in water. In order to overcome difficulties caused by the presence of other lanthanides, an ion exchange chromatographic technique was used.     

5-(5-氯-2-吡啶偶氮)-2,4-二氨基甲苯分光光度法测定微量钌(Ⅲ)

研究了 5- ( 5-氯 - 2 -吡啶偶氮 ) - 2 .4-二氨基甲苯 ( 5- Cl- PADAT)与钌 ( )的显色反应。在 p H4.0～ 6.5HAc- Na Ac缓冲溶液中 ,在加热的条件下 ,5- Cl-PADAT与 Ru( )形成稳定的配合物 ,加入无机酸 ( HCl,HCl O4 ,H2 SO4 ,H3 PO4 )酸化后 ,其最大吸收波长位于 50 5nm处 ,表观摩尔吸光系数为 8.5×1 0 4 L· mol-1· cm-1,钌浓度在 0～ 6μg/ 1 0 m L范围内服从比耳定律 ,Ru( )与 5- Cl- PADAT配合物的摩尔比为 1∶ 2。以 EDTA为掩蔽剂 ,方法具有良好的选择性 ,已应用于合成样中钌的测定。