Polyaspartic-acid-pyrolysis route for the synthesis of nanocrystalline LiCo<Subscript>0.15</Subscript>Mn<Subscript>1.85</Subscript>O<Subscript>4</Subscript> powder for Li-ion batteries

Nanocrystalline cubic spinel LiCo_0.15Mn_1.85O₄ powder was prepared by a novel method based on in situ polymerization of aspartic acid along with metal salts. Thermal study shows that the complete crystallization and/or formation of the compound is at 358 °C. The structural property of the synthesized material was characterized by X-ray diffraction studies. The X-ray diffractogram reveals the single-phase formation of the product. Scanning electron microscope study shows that the average grain size of the powder is less than 1 μm. To assess the electrochemical performance of the synthesized cathode material, the C/LiCo_0.15Mn_1.85O₄ cell with 1 M LiPF₆ in 1:1 (v/v) mixture of ethylene carbonate and dimethyl carbonate as the electrolyte was assembled, and the charge and discharge studies were made in between 3.0 and 4.8 V at a constant current density of 0.1 mAcm⁻². It shows that capacity loss is only 2% even after the 50th cycle. As this preparation method is simple and particularly suitable for preparation of highly homogeneous mixed metal oxides for Li-ion batteries.     

Improved Li- storage performance of heat-treated InFeCoO<Subscript>4</Subscript> spinel prepared by glycine assisted chemical route

Herein, we show the synthesis of high-capacity anode, InFeCoO₄ spinel for lithium ion batteries (LIBs), by facile glycine-assisted chemical approach. The structure and morphology are evaluated by X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS) and scanning electron microscopy (SEM) techniques, respectively. The pure phase formation of spinel InFeCoO₄ is confirmed from XRD pattern, whereas the oxidation state of Co in 2+ is determined from XAS analysis. Electrochemical performance of InFeCoO₄ in the half-cell configuration is evaluated by galvanostatic and cyclic voltammetry (CV) in the voltage window of 0.005–3.0 V vs. Li. When cycled at 60 mA g^?1, it shows a high first cycle reversible capacity of 750 (±10) mA h g^?1. However, slow capacity degradation is noticed upon cycling and reached 285 (±10) mA h g^?1 after 40 cycles. An improved Li-storage performance is noticed under similar cycling condition, when the electrode is heat-treated. It shows first cycle reversible capacity of 880 (±10) mA h g^?1 and reached 535 (±10) mA h g^?1 after 40 cycles. The coulombic efficiency is >98 % during cycling. The improved Li-storage performance is possibly due to the distribution of PVDF (binder) in the active materials as well as better electrical contact after heat treatment.     

Evaluation of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>-LiNi<Subscript>0.80</Subscript>Co<Subscript>0.15</Subscript>Al<Subscript>0.05</Subscript>O<Subscript>2</Subscript> hybrid material as cathode in soft-packed lithium ion battery

The major electrochemical performances of LiMn₂O₄ (LMO)-LiNi_0.80Co_0.15Al_0.05O₂ (NCA) blending cathodes with full-range ratios are evaluated in industrial perspective. The results indicate that the reversible lithium ions can be fully utilized when NCA percentage reaches up to 50 %. The median voltages of blends are higher than the value calculated from a linear relationship of the two pristine cathodes, which is beneficial to energy density. But a synergy effect on room-temperature cycle performance is not observed for the hybrid cathode. However, the high-temperature (45 °C) capacity retention with 70 % NCA is 97.9 % after 100 cycles, higher than both pristine cathodes. It is not until NCA content increases to more than 50 % that the high-rate performance is much deteriorated. Additionally, the swelling of fully charged pouch-type battery after 4 h storage at 85 °C disappears when NCA percentage is less than 50 %. Hence, it is practically manifested that critical flaws of NCA and LMO can be compromised by blending with each other in a critical ratio. In this way, NCA can be practically used in soft-packed battery.     

Synthesis and electrochemical characterization of graphene nanoflakes and LiFe<Subscript>0.97</Subscript>Ni<Subscript>0.03</Subscript>PO<Subscript>4</Subscript>/C for lithium-ion battery

The graphene nanoflakes and olivine-type LiFe_0.97Ni_0.03PO₄/C (LFNP3/C) samples have been synthesized as anode and cathode materials, respectively. Physicochemical characterization of the graphene nanoflakes and LFNP3/C material were studied using X-ray diffraction (XRD) and scanning electron microscope (SEM). The XRD patterns reveal the formation of the pure phase of both the synthesized samples. SEM micrographs disclose the formation of spherically shaped nanosized particles for LFNP3/C while graphene shows flake-type morphology. CR2032 half and full coin cells were assembled for electrochemical testing of the synthesized samples. Cyclic voltammetry (CV) results indicate that the graphene-based half-cells, i.e., GN1H and GN2H, possess reduction peak/plateau around 0.17 V while LFNP3/C cathode shows discharging voltage plateau at 3.4 V vs. Li/Li⁺. The discharge capacities were found to be 700, 900, and 153 mAhg^?1 for GN1H, GN2H, and LFNP3/C half-cells vs. Li/Li⁺, respectively. Among full cells, LFPGN1F with γ = 0.75 (mass/capacity balancing factor) shows better charging/discharging profile at each C-rate as compared to LFPGN2F with γ = 0.55. LFPGN1F delivered an initial discharge capacity of around 154 mAhg^?1 at 0.1C and even at a high discharge rate of 1C, it retained ~97% of the discharge capacity as compared to the initial cycle at the same rate.     

Nano Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> as sulfur host for high-performance Li-S battery

S/Li₄Ti₅O₁₂ cathode with high lithium ionic conductivity was prepared for Li-S battery. Herein, nano Li₄Ti₅O₁₂ is used as sulfur host and fast Li⁺ conductor, which can adsorb effectively polysulfides and improve remarkably Li⁺ diffusion coefficient in sulfur cathode. At 0.5 C, S/Li₄Ti₅O₁₂ cathode has a stable discharge capacity of 616 mAh g^?1 at the 700th cycle and a capacity loss per cycle of 0.0196% from the second to the 700th cycle, but the corresponding values of S/C cathode are 437 mAh g^?1 and 0.0598%. Even at 2 C, the capacity loss per cycle of S/Li₄Ti₅O₁₂ cathode is only 0.0273% from the second to the 700th cycle. The results indicate that Li₄Ti₅O₁₂ as the sulfur host plays a key role on the high performance of Li-S battery due to reducing the shuttle effect and enhancing lithium ionic conductivity.     

AlF<Subscript>3</Subscript> coating of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> for high-performance Li-ion batteries

AlF₃-coating is attempted to improve the performance of LiNi_0.5Mn_1.5O₄ cathode materials for Li-ion batteries. The prepared powders are characterized by scanning electron microscope, powder X-ray diffraction, charge/discharge, and impedance. The coated LiNi_0.5Mn_1.5O₄ samples show higher discharge capacity, better rate capability, and higher capacity retention than the uncoated samples. Among the coated samples, 1.0 mol% AlF₃-coated sample shows highest capacity after charge–discharged at 30 mA/g for 3 cycles, but 4.0 mol% coated sample exhibits the highest capacity and cycling stability when cycled at high rate of 150 and 300 mA/g. The 40th cycle discharge capacity at 300 mA/g current still remains 114.8 mAh/g for 4.0 mol% AlF₃-coated LiNi_0.5Mn_1.5O₄, while only 84.3 mAh/g for the uncoated sample.     

Preparation and electrochemical properties of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>/Ti<Subscript>4</Subscript>O<Subscript>7</Subscript> composite for lithium-ion batteries

In order to improve the rate capability of Li₄Ti₅O₁₂, Ti₄O₇ powder was successfully fabricated by improved hydrogen reduction method, then a dual-phase composite Li₄Ti₅O₁₂/Ti₄O₇ has been synthesized as anode material for lithium-ion batteries. It is found that the Li₄Ti₅O₁₂/Ti₄O₇ composite shows higher reversible capacity and better rate capability compared to Li₄Ti₅O₁₂. According to the charge-discharge tests, the Li₄Ti₅O₁₂/Ti₄O₇ composite exhibits excellent rate capability of 172.3 mAh g^?1 at 0.2 C, which is close to the theoretical value of the spinel Li₄Ti₅O₁₂. More impressively, the reversible capacity of Li₄Ti₅O₁₂/Ti₄O₇ composite is 103.1 mAh g^?1 at the current density of 20 C after 100th cycles, and it maintains 84.8% of the initial discharge capacity, whereas that of the bare spinel Li₄Ti₅O₁₂ is only 22.3 mAh g^?1 with a capacity retention of 31.1%. The results indicate that Li₄Ti₅O₁₂/Ti₄O₇ composite could be a promising anode material with relative high capacity and good rate capability for lithium-ion batteries.     

Improving the rate performance and stability of LiNi<Subscript>0.6</Subscript>Co<Subscript>0.2</Subscript>Mn<Subscript>0.2</Subscript>O<Subscript>2</Subscript> in high voltage lithium-ion battery by using fluoroethylene carbonate as electrolyte additive

Fluoroethylene carbonate (FEC) is investigated as the electrolyte additive to improve the electrochemical performance of high voltage LiNi_0.6Co_0.2Mn_0.2O₂ cathode material. Compared to LiNi_0.6Co_0.2Mn_0.2O₂/Li cells in blank electrolyte, the capacity retention of the cells with 5 wt% FEC in electrolytes after 80 times charge-discharge cycle between 3.0 and 4.5 V significantly improve from 82.0 to 89.7%. Besides, the capacity of LiNi_0.6Co_0.2Mn_0.2O₂/Li only obtains 12.6 mAh g^?1 at 5 C in base electrolyte, while the 5 wt% FEC in electrolyte can reach a high capacity of 71.3 mAh g^?1 at the same rate. The oxidative stability of the electrolyte with 5 wt% FEC is evaluated by linear sweep voltammetry and potentiostatic data. The LSV results show that the oxidation potential of the electrolytes with FEC is higher than 4.5 V vs. Li/Li⁺, while the oxidation peaks begin to appear near 4.3 V in the electrolyte without FEC. In addition, the effect of FEC on surface of LiNi_0.6Co_0.2Mn_0.2O₂ is elucidated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The analysis result indicates that FEC facilitates the formation of a more stable surface film on the LiNi_0.6Co_0.2Mn_0.2O₂ cathode. The electrochemical impedance spectroscopy (EIS) result evidences that the stable surface film could improve cathode electrolyte interfacial resistance. These results demonstrate that the FEC can apply as an additive for 4.5 V high voltage electrolyte system in LiNi_0.6Co_0.2Mn_0.2O₂/Li cells.     

Synthesis and electrochemical properties of P2-Na<Subscript>2/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>2/3</Subscript>O<Subscript>2</Subscript>

The pure phase P2-Na_2/3Ni_1/3Mn_2/3O₂ was synthesized by a solid reaction process. The optimum calcination temperature was 850 °C. The as-prepared product delivered a capacity of 158 mAh g^?1 in the voltage range of 2–4.5 V, and there was a phase transition from P2 to O2 at about 4.2 V in the charge process. The P2 phase exhibited excellent intercalation behavior of Na ions. The reversible capacity is about 88.5 mAh g^?1 at 0.1 C in the voltage range of 2–4 V at room temperature. At an elevated temperature of 55 °C, it could remain as an excellent capacity retention at low current rates. The P2-Na_2/3Ni_1/3Mn_2/3O₂ is a potential cathode material for sodium-ion batteries.     

Synthesis and lithium-ion storage performances of LiFe<Subscript>0.5</Subscript>Co<Subscript>0.5</Subscript>PO<Subscript>4</Subscript>/C nanoplatelets and nanorods

Carbon-coated olivine-structured LiFe_0.5Co_0.5PO₄ solid solution was synthesized by a facile rheological phase method and applied as cathode materials of lithium-ion batteries. The nanostructure’s properties, such as morphology, component, and crystal structure for the samples, characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer, Emmett, and Teller (BET) determination, X-ray photoelectron spectroscopy (XPS), and the electrochemical performances were evaluated using constant current charge/discharge tests and electrochemical impedance spectroscopy (EIS). The results indicate that nanoplatelet- and nanorod-structured LiFe_0.5Co_0.5PO₄/C composites were separately obtained using stearic acid or polyethylene glycol 400 (PEG400) as carbon source, and the surfaces of particles for the two samples are ideally covered by full and uniform carbon layer, which is beneficial to improving the electrochemical behaviors. Electrochemical tests verify that the nanoplatelet LiFe_0.5Co_0.5PO₄/C shows a better capacity capability, delivering a discharge specific capacity of 133.8, 112.1, 98.3, and 74.4 mAh g^?1 at 0.1, 0.5, 1, and 5 C rate (1 C?=?150 mA g^?1); the corresponding cycle number is 5th, 11th, 15th, 20th, and 30th, respectively, whereas the nanorod one possesses more excellent cycling ability, with a discharge capacity of 83.3 mAh g^?1 and capacity retention of 86.9% still maintained after cycling for 100 cycles at 0.5 C. Results from the present study demonstrate that the LiFe_0.5Co_0.5PO₄ solid solution nanomaterials with favorable carbon coating effect combine the characteristics and advantage of LiFePO₄ and LiCoPO₄, thus displaying a tremendous potential as cathode of lithium-ion battery.     

Antisite defects and valence state of vanadium in Na<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Electron paramagnetic resonance (EPR) studies have been performed with the aim of determining the valence state and local crystal structure of the nearest environment of vanadium ions in the initial, charged, and discharged samples of the cathode material Na_xV₂(PO₄)₃ (1 ≤ x ≤ 3). It has been found that the charged sample (x = 1) is characterized by an intense signal corresponding to V⁴⁺ ions located in a highly distorted octahedral crystal field. An EPR signal with the g-factor close to the g-factor of the V⁴⁺ ion has also been observed in the initial sample (x = 3), where the intensity of the resonance signal is one order of magnitude lower than that in the charged sample. It has been revealed that the resonance signal under consideration is associated with the formation of antisite defects when a part of vanadium ions are located in sites of sodium ions. It has also been found that the intensity of this signal increases after a complete charge–discharge cycle (x = 3).     

An investigation on the unsatisfactory rate capability of spherical LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> particles prepared by using Na<Subscript>2</Subscript>CO<Subscript>3</Subscript> as a precipitant

Spherical LiNi_1/3Co_1/3Mn_1/3O₂ particles were successfully synthesized using Na₂CO₃ as a precipitant. Electrochemical measurements indicate that the as-synthesized spherical particles deliver a high reversible capacity of above 180 mAh g^?1 at 0.1 C in the voltage range of 2.8–4.4 V and display an excellent cyclic performance at 0.5 C. However, unsatisfactory rate capability was detected for the as-prepared spherical particles. The reason for the unsatisfactory rate capability was investigated through a comparison of the properties of the as-synthesized spherical particles versus the ball-milled samples via a combination of specific surface areas test, electronic conductivity measurement, and electrochemical impedance spectroscopy. The results show that both the rate capabilities of cathode materials and the electronic conductivities of the mixtures of active material, conductive additive, and binder are highly improved when the secondary spherical particles were broken, indicating that the poor electronic conductivity of electrode caused by the large secondary spherical particles with a great amount of nano-pores is a significant factor for the unsatisfactory rate capability.     

Stone-Wales transformation paths in fullerene C<Subscript>60</Subscript>

The mechanisms of formation of a metastable defect isomer of fullerene C₆₀ due to the Stone-Wales transformation are theoretically studied. It is demonstrated that the paths of the “dynamic” Stone-Wales transformation at a high (sufficient for overcoming potential barriers) temperature can differ from the two “adiabatic” transformation paths discussed in the literature. This behavior is due to the presence of a great near-flat segment of the potential-energy surface in the neighborhood of metastable states. Moreover, the sequence of rupture and formation of interatomic bonds is other than that in the case of the adiabatic transformation.     

Enhanced electrochemical performance of lithium ion battery cathode Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C

Li-ion battery cathode material lithium-vanadium-phosphate Li₃V₂(PO₄)₃ was synthesized by a carbon-thermal reduction method, using stearic acid, LiH₂PO₄, and V₂O₅ as raw materials. And stearic acid acted as reductant, carbon source, and surface active agent. The effect of its content on the crystal structure and electrochemical performance of Li₃V₂(PO₄)₃/C were characterized by XRD and electrochemical performance testing, respectively. The results showed that the content of carbon source has no significant effect on the crystal structure of lithium vanadium phosphate. Lihtium vanadium phosphate obtained with 12.3% stearic acid demonstrated the best electrochemical properties with a typical discharge capacity of 119.4 mAh/g at 0.1 C and capacity retention behavior of 98.5% after 50 cycles. And it has high reversible discharge capacity of 83 mAh/g at 5 C with the voltage window of 3 to 4.3 V.     

Electrochemical properties of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C cathode materials synthesized via ethylene glycol-assisted solvothermal method

The Li₃V₂(PO₄)₃/C (LVP/C) cathode materials for lithium-ion batteries were synthesized via ethylene glycol-assisted solvothermal method. The phase composition, phase transition temperature, morphology, and fined microstructure were studied using X-ray diffraction (XRD), differential thermal analyzer (DTA), scanning electron microscope (SEM), and transmission electron microscope (TEM), respectively. The electrochemical properties, impedance, and electrical conductivity of LVP/C cathode materials were tested by channel battery analyzer, the electrochemical workstation, and the Hall test system, respectively. The results shown that the appropriate amount of water added to ethylene glycol solvent contributes to the synthesis of pure phase LVP. The LVP₁₀/C cathode material can exhibit discharge capacities of 128, 126, 126, 123, 124, and 114 mAh g^?1 at 0.1, 0.5, 2, 5, 10, and 20 C in the voltage range of 3.0–4.3 V, respectively. Meanwhile, it shows also a stable cycling performance with the capacity retention of 89.6% after 180 cycles at 20 C.     

Insertion properties of LiFe<Subscript>0.5</Subscript>Mn<Subscript>0.5</Subscript>PO<Subscript>4</Subscript> electrode materials for Li-ion batteries

This paper addresses the synthesis structural and electrochemical properties of LiFe_0.5Mn_0.5PO₄ electrode materials for Li-ion batteries. The charge–discharge reaction of Li/LiPF₆-EC–DEC/LiFe_0.5Mn_0.5PO₄ cell carried out at the 1-C rate shows a capacity retention of 128 mAh/g. The local structure of the delithiated Li _x Fe_0.5Mn_0.5PO₄ phases have been studied by Fourier transform infrared spectroscopy and magnetometry. Spectral features indicate that the structure of the delithiated phase remains in the orthorhombic system. The compositional dependence of the magnetic moment is found to be in quantitative agreement with the theoretical value predicted for oxidation of M ²⁺ ions in the high spin state. Paper presented at the 11th Euro-Conference on Science and Technology of Ionics, Batz-sur-Mer, France, 9–15 Sept. 2007     

Dandelion-like mesoporous Co<Subscript>3</Subscript>O<Subscript>4</Subscript> as anode materials for lithium ion batteries

A dandelion-like mesoporous Co₃O₄ was fabricated and employed as anode materials of lithium ion batteries (LIBs). The architecture and electrochemical performance of dandelion-like mesoporous Co₃O₄ were investigated through structure characterization and galvanostatic charge/discharge test. The as-prepared dandelion-like mesoporous Co₃O₄ consisted of well-distributed nanoneedles (about 40 nm in width and about 5 μm in length) with rich micropores. Electrochemical experiments illustrated that the as-prepared dandelion-like mesoporous Co₃O₄ as anode materials of LIBs exhibited high reversible specific capacity of 1430.0 mA h g^?1 and 1013.4 mA h g^?1 at the current density of 0.2 A g^?1 for the first and 100th cycle, respectively. The outstanding lithium storage properties of the as-prepared dandelion-like mesoporous Co₃O₄ might be attributed to its dandelion-like mesoporous nanostructure together with an open space between adjacent nanoneedle networks promoting the intercalation/deintercalation of lithium ions and the charge transfer on the electrode. The enhanced capacity as well as its high-rate capability made the as-prepared dandelion-like mesoporous Co₃O₄ to be a good candidate as a high-performance anode material for LIBs.     

Highly efficient solid-state synthesis of carbon-encapsulated ultrafine MoO<Subscript>2</Subscript> nanocrystals as high rate lithium-ion battery anode

A simple and highly efficient method is developed for the one-step in situ preparation of carbon-encapsulated MoO₂ nanocrystals (MoO₂@C) with core-shell structure for high-performance lithium-ion battery anode. The synthesis is depending on the solid-state reaction of cyclopentadienylmolybdenum tricarbonyl dimer with ammonium persulfate in an autoclave at 200 °C for 30 min. The large amount of heat generated during the explosive reaction cleaves the cyclopentadiene ligands into small carbon fragments, which form carbon shell after oxidative dehydrogenation coating on the MoO₂ nanocrystals, resulting in the formation of core-shell structure. The MoO₂ nanocrystals have an equiaxial morphology with an ultrafine diameter of 2–8 nm, and the median size is 4.9 nm. Hundreds of MoO₂ nanocrystals are encapsulated together by the worm-like carbon shell, which is amorphous and about 3–5 nm in thickness. The content of MoO₂ nanocrystals in the nanocomposite is about 69.3 wt.%. The MoO₂@C anode shows stable cyclability and retains a high reversible capacity of 443 mAh g^?1 after 50 cycles at a current density of 3 A g^?1, owing to the effective protection of carbon shell.     

First-principles study of bulk and surface oxygen vacancies in SrTiO<Subscript>3</Subscript> crystal

The structural and electronic properties of the neutral and positively charged oxygen vacancies (F and F⁺ centres) in the bulk and on the (001) surfaces of SrTiO₃ crystal are examined within the hybrid Hartree-Fock and density functional theory (HF-DFT) method based upon the linear combination of atomic orbital (LCAO) approach. A comparison of the formation energy for surface and bulk defects indicates a perceptible propensity for the segregation of neutral and charged vacancies to both SrO and TiO₂ surface terminations with a preference in the latter case which is important for interpretation of space charge effects at ceramic interfaces. It is found that the vacancies reveal more shallow energy levels in the band gap on surfaces rather than in the bulk, in particular, on the TiO₂ surface. The charged F⁺ centre has significantly deeper energy levels both in bulk and on the surfaces, as compared with the neutral F centre.     

Improved structural stability and electrochemical performance of Na<Subscript>3</Subscript>V<Subscript>2</Subscript> (PO<Subscript>4</Subscript>)<Subscript>3</Subscript> cathode material by Cr doping

Cr-doped sodium vanadium phosphate (NVP) in the form of Na₃V_2-xCr_x(PO₄)₃ (x = 0, 0.02, 0.04, 0.08, 0.10) is synthesized via a facile sol-gel route as cathode materials for sodium ion batteries. The structure and morphology of these materials are systematically characterized by x-ray diffraction (XRD), Fourier-infrared spectra (FT-IR), and scanning electron microscope (SEM). XRD analysis reveals that with the increasing amount of Cr, the crystallographic parameters show a descending trend. Electrochemical tests show that the cycle stability and the specific capacity of the sodium ion batteries can be significantly improved by doping Cr into NVP. Among all the Cr-doped cathode materials, Na₃V_1.92Cr_0.08(PO₄)₃ achieves the highest capacity of 112.2 mAh g^?1 and the capacity retention is 97.2 % after 50 cycles. Electrochemical impedance spectroscopy measurements demonstrate that Cr doping is an effective method to reduce the contact resistance of interparticles by suppressing irreversible phase transformation at low sodium contents.