Electrocyclic rearrangement of pentamethylcyclooctapyrimidine-2,4-diones: reaction pathway into a 9,11-diazapentacyclo-[6.4.0.0(1,3).0(2,5).0(4,8)]dodecane system and a 9,11-diazapentacyclo [6.4.0.0(1,3).0(2,6).0(4,8)]dodecane system

Photolysis of 6-chloro-1,3-dimethyluracil and mesitylene in the presence of trifluoroacetic acid (TFA) at low temperature gave 1,3,5,7,9- and 1,3,6,8,10-pentamethylcyclooctapyrimidine-2,4-diones (1b, 1c). Sequential photoreaction of the former (1b) resulted in the formation of 9,11-diazapentacyclo[6.4.0.0(1,3).0(2,5).0(4,8)]dodecane-2,4-dione (2b) by way of 9-exo-methylene derivative (7b) and cyclobutaquinazoline (8b). On the other hand, UV-irradiation of 1c led to the bond shift isomer (5c) whose photolysis in the presence of TFA gave rise to the formation of the [6.4.0.0(1,3).0(2,6).0(4,8)]dodecane isomer (3c).     

Preparation and reactivity of [D3d]-octahedrane: the most stable (CH)12 hydrocarbon

The synthesis of the (CH)12 hydrocarbon [D(3d)]-octahedrane (heptacyclo[6.4.0.0(2,4).0(3,7).0(5,12).0(6,10).0(9,11)]dodecane) 1 and its selective functionalization retaining the hydrocarbon cage is described. The B3LYP/6-311+G* strain energy of 1 is 83.7 kcal mol(-1) (4.7 kcal mol(-1) per C-C bond) which is significantly higher than that of the structurally related (CH)16 [D(4d)]-decahedrane 2 (75.4 kcal mol(-1); 3.1 kcal mol(-1) per C-C bond) and (CH)20 [I(h)]-dodecahedrane 3 (51.5 kcal mol(-1); 1.7 kcal mol(-1) per C-C bond); the heats of formation for 1-3 computed according to homodesmotic equations are 52, 35, and 4 kcal mol(-1). Catalytic hydrogenation of 1 leads to consecutive opening of the two cyclopropane rings to give C2-bisseco-octahedrane (pentacyclo[6.4.0.0(2,6).0(3,11).0(4,9)]dodecane) 16 as the major product. Although 1 is highly strained, its carbon skeleton is kinetically quite stable: Upon heating, 1 does not decompose until above 180 degrees C. The B3LYP/6-31G* barriers for the S(R)2 attack of the tBuO. and Br3C. radicals on a carbon atom of one of the cyclopropane fragments (Delta(298) = 27-28 kcal mol(-1)) are higher than those for hydrogen atom abstraction. The latter barriers are virtually identical for the abstraction from the C1-H and C2-H positions with the tBuO. radical (DeltaG(298) = 17.4 and 17.9 kcal mol(-1), respectively), but significantly different for the reaction at these positions with the Br3C. radical (DeltaG(298) = 18.8 and 21.0 kcal mol(-1)). These computational results agree well with experiments, in which the chlorination of 1 with tert-butyl hypochlorite gave a mixture of 1- and 2-chlorooctahedranes (ratio 3:2). The bromination with carbon tetrabromide under phase-transfer catalytic (PTC) conditions (nBu4NBr/NaOH) selectively gave 1-bromooctahedrane in 43 % isolated yield. For comparison, the PTC bromination was also applied to 2,4-dehydroadamantane yielding 54 % 7-bromo-2,4-dehydroadamantane.     

Photochemical study of [3(3)](1,3,5)cyclophane and emission spectral properties of [3n]cyclophanes (n = 2-6)

Thephotochemical reaction of [3(3)](1,3,5)cyclophane 2, which is a photoprecursor for the formation of propella[3(3)]prismane 18, was studied using a sterilizing lamp (254 nm). Upon photolysis in dry and wet CH2Cl2 or MeOH in the presence of 2 mol/L aqueous HCl solution, the cyclophane 2 afforded novel cage compounds comprised of new skeletons, tetracyclo[6.3.1.0.(2,7)0(4,11)]dodeca-5,9-diene 43, hexacyclo[6.4.0.0.(2,6)0.(4,11)0.(5,10)0(9,12)]dodecane 44, and pentacyclo[6.4.0.0.(2,6)0.(4,11)0(5,10)]dodecane 45. All of these products were confirmed by the X-ray structural analyses. A possible mechanism for the formation of these photoproducts via the hexaprismane derivative 18 is proposed. The photophysical properties in the excited state of the [3n]cyclophanes ([3n]CP, n = 2-6) were investigated by measuring the emission spectra and determining the quantum yields and lifetimes of the fluorescence. All [3n]CPs show excimeric fluorescence without a monomeric one. The lifetime of the excimer fluorescence becomes gradually longer with the increasing number of the trimethylene bridges. The [3n]CPs also shows excimeric phosphorescence spectra without vibrational structures for n = 2, 4, and 5, while phosphorescence is absent for n = 3 and 6. With an increase in symmetry of the benzene skeleton in the [3(3)]- and [3(6)]CPs, the probability of the radiation (phosphorescence) process from the lowest triplet state may drastically decrease.     

Cross-coupling of highly pyramidalized alkenes: A straightforward access to functionalized tetrasecododecahedradienes

The synthesis and chemical trapping of a highly pyramidalized pentacyclo[6.4.0.0(2,10).0(3,7).0(4,9)]dodec-8-ene containing ketal functions is reported. Its cross-coupling reaction with 3, 7-dimethyltricyclo[3.3.0.0(3,7)]oct-1(5)-ene followed by a [2 + 2] retrocycloaddition reaction gives a straightforward access to functionalized tetrasecododecahedradienes.     

Molecular design of lipophilic disalicylic acid compounds with varying spacers for selective lead(II) extraction

Lipophilic disalicylic acids 5,5'-decyl-2,2'-[1,2-ethanediylbis(oxy)]bisbenzoic acid (1), 5,5'-decyl-2,2'-[1,3-propanediylbis(oxy)]bisbenzoic acid (2), 5,5'-decyl-2,2'-[oxybis(1,2-ethanediyl-oxy)]bisbenzoic acid (3), 3,5-bis[2'-(2'-carboxyphenoxy)ethyl]-4-oxahexacyclo-[5.4.1.0(2,6).0(3,10).0(5,9).0(8,11)]dodecane (4), and 1,3-bis[2'-(2'-carboxyphenoxy)ethyl]adamantane (5) are evaluated as selective Pb(II) extractants. The solvent extraction of Pb(II) and of Cu(II) from buffered aqueous solutions of varying pH into chloroform by ligands 1-5 is examined in relation to the molecular structure of the dicarboxylic acid extractant. Ligand 1, with an ethylene spacer between two lipophilic salicylic acid units, exhibits excellent extraction selectivity for Pb(II) over Cu(II). Lengthening the spacer in ligands 2 and 3 diminishes both the extraction efficiency and selectivity. Ligands 4 and 5, with rigid spacer units, show significant reductions in both Pb(II) and Cu(II) extraction. Slope analysis reveals that ligand 1 reacts in a 2:1 stoichiometry with Pb(II) in extraction, which differs from the 1:1 stoichiometries for 2 and 3. The differences in the half extraction pH (DeltapH(1/2)) values for Pb(II) and Cu(II) extraction are 1.29, 0.49, and 0.48 for 1-3, respectively.     

Synthesis and near infrared electrochromic properties of metallodithiolene complexes

Four metallodithiolene complexes[4,8-bis(octyloxy)-1,3,5,7-tetrathia]?di[1,1′-bis(diphenylphosphino)ferrocene?palladium(II)](3),[4,8-bis(octyloxy)-1,3,5,7-tetrathia]di[1,3-bis(diphenylphosphino)propane?nickel(II)](4),[4,8-bis(octyloxy)-1,3,5,7-tetra-thia]?[1,1′-bis(diphenylphosphino)ferrocene?palladium(II)]?[1,3-bis(diphenylphosphino)propane·nickel(II)](5)and di[4,8-bis(octyloxy)-1,3,5,7-tetrathia]?[1,1′-bis(diphenylphosphino)ferrocene?palladium(II)]?nickel(II)(6)were synthesized and the near-infrared(NIR)electrochromic properties were studied.The spectroelectrochemical spectra and the electrochromic parameters such as optical contrast,switching time,optical density change,electrochromic efficiency and optical attenuation of complexes 3–6 were investigated in detail.The symmetric binuclear complex 4 showed relatively high electrochromic efficiency of63.0 and 75.4 cm~2/C both in the two oxidation states.The complexes exhibited excellent electroactive/electrochromic stability characterized by chronoamperometry(4000 cyclic switches).     

Synthesis of Tricyclic Skeletons Mediated by (Diene)Fe(CO)3 Complexes

Sequential additions of carbon nucleophiles to the (η⁵-pentadienyl)Fe(CO)₃ cation afforded tricyclo[6.3.0.0^2.6]undecane, tricyclo[6.4.0.0^2.6]dodecane, tricyclo[7.3.0.0^2.7]dodecane and tricyclo[7.4.0.0^2.7]-tridecane derivatives. The same strategy can also be applied to construct heterotricyclic skeletons.     

Syntheses, structures, and electrochemical properties of platinum(II) complexes containing di-tert-butylbipyridine and crown ether annelated dithiolate ligands

A series of new platinum(II) complexes containing both 4,4'-di-tert-butyl-2,2'-bipyridine (dbbpy) and the extended tetrathiafulvalenedithiolate ligands have been prepared and characterized. These complexes include [Pt(dbbpy)(C8H4S8)] (1; C8H4S82- = 2-{(4,5-ethylenedithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(ptdt)] (2; ptdt = 2-{(4,5-cyclopentodithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(mtdt)] (3; mtdt = 2-{(4,5-methylethylenedithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(btdt)] (4; btdt = benzotetrathiafulvalenedithiolate), [Pt(dbbpy)(C8H6S8)] (5; C8H6S82- = 2-{4,5-bis(methylthio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(3O-C6S8)] (6; 3O-C6S82- = 2-{4,5-dithia-(3',6',9'-trioxaundecyl)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), and [Pt(dbbpy)(4O-C6S8)] (7; 4O-C6S82- = 2-{4,5-dithia-(3',6',9',12'-tetraoxatetradecyl)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate). The crystal structures of a new ligand precursor (2-[4,5-dithia-(3',6',9',12'-tetraoxatetradecyl)-1,3-dithiol-2-ylidene]-4,5-bis(2-cyanoethylsulfanyl)-1,3-dithiole, IIIc) and complexes 5-7 have been determined by X-ray crystallography. Complexes 1-7 show intense electronic absorption bands in the UV-vis region due to the intramolecular mixed metal/ligand-to-ligand charge-transfer transition, and they display significant solvatochromic behavior. Redox properties of these compounds have been investigated by cyclic voltammetry, and complex 7 shows a significant response for Na+ ions with a large positive shift of ca. 45 mV.     

1,3-dialkyl- and 1,3-diaryl-3,4,5,6-tetrahydropyrimidin-2-ylidene rhodium(i) and palladium(II) complexes: synthesis, structure, and reactivity

The synthesis of novel 1,3-diaryl- and 1,3-dialkylpyrimidin-2-ylidene-based N-heterocyclic carbenes (NHCs) and their rhodium(i) and palladium(II) complexes is described. The rhodium compounds bromo(cod)[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (7), bromo(cod)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (8) (cod=eta(4)-1,5-cyclooctadiene, mesityl=2,4,6-trimethylphenyl), chloro(cod)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (9), and chloro(cod)[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (10) were prepared by reaction of [[Rh(cod)Cl](2)] with lithium tert-butoxide followed by addition of 1,3-dimesityl-3,4,5,6-tetrahydropyrimidinium bromide (3), 1,3-dimesityl-3,4,5,6-tetrahydropyrimidinium tetrafluoroborate (4), 1,3-di-2-propyl-3,4,5,6-tetrahydropyrimidinium bromide (6), and 1,3-di-2-propyl-3,4,5,6-tetrahydropyrimidinium tetrafluoroborate, respectively. Complex 7 crystallizes in the monoclinic space group P2(1)/n, and 8 in the monoclinic space group P2(1). Complexes 9 and 10 were used for the synthesis of the corresponding dicarbonyl complexes dicarbonylchloro(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (11), and dicarbonylchloro[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (12). The wavenumbers nu(CO I)/nu(CO II) for 11 and 12 were used as a quantitative measure for the basicity of the NHC ligand. The values of 2062/1976 and 2063/1982 cm(-1), respectively, indicate that the new NHCs are among the most basic cyclic ligands reported so far. Compounds 3 and 6 were additionally converted to the corresponding cationic silver(i) bis-NHC complexes [Ag(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2)]AgBr(2) (13) and [Ag[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene](2)]AgBr(2) (14), which were subsequently used in transmetalation reactions for the synthesis of the corresponding palladium(II) complexes Pd(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2) (2+)(Ag(2)Br(2)Cl(4) (4-))(1/2) (15) and Pd[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2)]Cl(2) (16). Complex 15 crystallizes in the monoclinic space group P2(1)/c, and 16 in the monoclinic space group C(2)/c. The catalytic activity of 15 and 16 in Heck-type reactions was studied in detail. Both compounds are highly active in the coupling of aliphatic and aromatic vinyl compounds with aryl bromides and chlorides with turnover numbers (TONs) up to 2000000. Stabilities of 15 and 16 under Heck-couplings conditions were correlated with their molecular structure. Finally, selected kinetic data for these couplings are presented.     

Synthesis and reactivity of trans-Tricyclo

The first synthesis of trans-tricyclo[4.2.0.0(1,3)]oct-4-ene (1), an ethenyl bridged spirohexane, was accomplished in four steps starting from Carpino et al. gem-dichloro ketone 6. An X-ray crystal structure of 1 with one substituent was obtained to provide geometry data on this novel ring system and to confirm the stereochemical assignment of the penultimate synthetic intermediate. Tricyclo[4.2.0. 0(1,3)]oct-4-ene is surprisingly stable. It reacts with glacial acetic acid but only slowly at 145 degrees C; the products were isolated and identified. A unimolecular rearrangement takes place at elevated temperatures (165 degrees C and higher), presumably, via a biradical intermediate to afford tricyclo[4.2.0.0(1,5)]oct-3-ene (23). The structure of this 1,5-bridged bicyclo[2.1.0]pentane derivative was established by NMR and an X-ray crystal structure of its Diels-Alder adduct with isobenzofuran. Tricyclo[4.2.0.0(1, 3)]oct-4-ene equilibrates with 23, so equilibrium constants and reaction rates were measured over a 20 degrees C temperature range from 180 degrees C to 200 degrees C. The difference in the heats of formation (DeltaDeltaH degrees (f) (23 - 1)) is -2.1 kcal/mol, which is in good agreement with ab initio (HF and MP2) calculations using the 6-31G(d) basis set (-1.9 (HF) and -1.4 (MP2) kcal/mol). Computations on trans-tricyclo[4.2.0.0(1,3)]octane and spirohexane also were carried out, and the structures and energies were compared.     

Thermal isomerization of tricyclo[4.1.0.0(2,7)]heptane and bicyclo[3.2.0]hept-6-ene through the (E,Z)-1,3-cycloheptadiene intermediate

The thermal isomerization of tricyclo[4.1.0.0(2,7)]heptane and bicyclo[3.2.0]hept-6-ene was studied using ab initio methods at the multiconfiguration self-consistent field level. The lowest-energy pathway for thermolysis of both structures proceeds through the (E,Z)-1,3-cycloheptadiene intermediate. Ten transition states were located, which connect these three structures to the final product, (Z,Z)-1,3-cycloheptadiene. Three reaction channels were investigated, which included the conrotatory and disrotatory ring opening of tricyclo[4.1.0.0(2,7)]heptane and bicyclo[3.2.0]hept-6-ene and trans double bond rotation of (E,Z)-1,3-cycloheptadiene. The activation barrier for the conrotatory ring opening of tricyclo[4.1.0.0(2,7)]heptane to (E,Z)-1,3-cycloheptadiene was found to be 40 kcal mol(-1), while the disrotatory pathway to (Z,Z)-1,3-cyclohetpadiene was calculated to be 55 kcal mol(-1). The thermolysis of bicyclo[3.2.0]hept-6-ene via a conrotatory pathway to (E,Z)-1,3-cycloheptadiene had a 35 kcal mol(-1) barrier, while the disrotatory pathway to (Z,Z)-1,3-cyclohetpadiene had a barrier of 48 kcal mol(-1). The barrier for the isomerization of (E,Z)-1,3-cycloheptadiene to bicyclo[3.2.0]hept-6-ene was found to be 12 kcal mol(-1), while that directly to (Z,Z)-1,3-cycloheptadiene was 20 kcal mol(-1).     

Stereoselective Construction of Copaborneol and Longiborneol Frameworks by Intramolecular Double Michael Reaction

Stereoselective syntheses of tricyclo[5.3.0.0(3,8)]decane 22 and tricyclo[6.3.0.0(3,9)]undecane 26, the basic skeletons of copaborneol and longiborneol, were achieved by the intramolecular double Michael reactions of 2-cyclopenten-1-ones 15-17. The substrates were prepared starting with tricyclo[5.2.1.0(2,6)]deca-4,8-dien-3-one (6). The intramolecular double Michael reactions were carried out under three different conditions: TMSCl-Et(3)N-ZnCl(2), TMSI-(TMS)(2)NH, and Bu(2)BOTf-(TMS)(2)NH. The framework 26 of longiborneol was constructed in good yields using the latter two reagent systems.     

Investigation of reactions of the organozinc reagents prepared from zinc and dialkyl dibromomalonates with the derivatives of 2-arylmethyleneindan-1,3-dione and 5-arylmethylene-2,2-dimethyl-1,3-dioxane-4,6-dione

Organozinc compounds prepared from dialkyl dibromomalonates and zinc react with 2-arylmethyl-eneindan-4,6-diones, 5-arylmethylene-2,2-dimethyl-1,3-dioxane-4,6-diones, as well as with 2-[4-(1,3-dioxoindan-2-ylidenemethyl)phenyl]methyleneindan-1,3-dione and 5-[4-(2,2-dimethyl-4,6-dioxo-1,3-dioxane-2-ylidenemethyl)phenyl]methylene-2,2-dimethyl-1,3-dioxane-4,6-diones to form dialkyl 3-aryl-1′3′-dioxaspiro(cyclopropane-2,2′-indan)-1,1-dicarboxylates, dimethyl 3-aryl-6,6-dimethyl-5,7-dioxa-4,8-dioxaspiro[2,5]octan-2,2-dicarboxylates, dialkyl 2-{4-[3,3-bis (alkoxycarbonyl)-1′,3′-dioxaspiro(cyclopropane-2,2′-indan)-1-yl]phenyl}-1′,3′-dioxaspiro[cyclopropane-2,2′-indan]-1,1-dicarboxylates, and dialkyl 2-{4-[2,2-bis(alkoxycarbonyl)-6,6′-dimethyl-4,8-dioxo-5,7-dioxaspiro[2,5]oct-1-yl]phenyl}-6,6-dimethyl-4,8-dioxo-5,7-dioxaspiro[2,5]octan-1,1-dicarboxylate respectively.     

Synthesis and Crystal Structure of a Novel Cobalt（Ⅱ） Coordination Polymer with 1,2,4,5-Benzenetetracarboxylate

A novel cobalt（II） coordination polymer,[Co（BTEC）1/2]n 1,has been synthesized with Co（NO3）2·6H2O and 1,2,4,5-benzenetetracarboxylic acid （H4BTEC） by the hydrothermal method,and characterized by elemental analysis,IR and single-crystal X-ray diffraction. Crystallographic data for 1： C5HO4Co,Mr = 183.99,monoclinic,space group C2/c,a = 16.619（6）,b = 7.416（3）,c = 8.040（3）A,β = 90.612（4）°,V = 990.8（6） A^3,Z = 8,Dc = 2.467 g/cm^3,μ = 3.390 mm^-1,F（000） = 720,R = 0.0307 and wR = 0.0847 for 912 observed reflections （I 〉 2σ（I））. X-ray crystal structural analysis revealed that each Co（II） adopts a tetrahedral coordination mode to link four separate BTEC ligands via uniform monodentate carboxylate groups and each BTEC ligand possesses an 8-connected geometry to connect eight Co（II） ions. Complex 1 exhibits a rare （4,8）-connected net with （45.6）2（410.614.84） topology.     

Transannular reactions of two parallel 1,3-butadiynes: syntheses,structures, and reactions of 1-azacyclotetradeca-3,5,10,12-tetrayne derivatives

The synthesis of 1-alkyl and 1-aryl-1-azacyclotetradeca-3,5,10,12-tetraynes was achieved in a stepwise approach. The key intermediate was 1,13-dibromotrideca-2,4,9,11-tetrayne (18). Reaction with methyl- (19 a), ethyl- (19 b), isopropyl- (19 c), n-butyl- (19 d), and tert-butylamine (19 e) as well as aniline (19 f) and p-methoxyaniline (19 g) gave the corresponding 14-membered tetraynes 20 a-20 g. The ring inversion process of 20 b was studied by variable temperature (1)H NMR spectroscopy. From these measurements a value of 10.6 kcal mol(-1) was calculated for DeltaG(not equal). X-ray investigations on single crystals of 20 b, 20 c, and 20 f revealed the axial position for the substituent at each nitrogen atom. For 20 b we encountered the chair conformation, for 20 c both chair and boat conformations, and for 20 f the boat conformation in the solid state. The reaction of 20 c with concentrated HCl in ethanol yielded 2,10-dichloro-6-isopropyl-6-azatricyclo[9.3.0.0(4,8)]tetradeca-1(11),2,4(8),9-tetraene (25 c). Compound 25 c was oxidized by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) to 27 c. The structure of the latter was confirmed by X-ray investigations. The reaction of 20 c in aqueous HCl lead to the formation of 10-chloro-2-isopropyl-1,3,4,6,7,8-hexahydro-2H-benzo[g]isoquinolin-9-one (37 c). The structure of 37 c was verified by X-ray studies on single crystals.     

Synthesis of palladium(II) complexes containing a new alpha-D-xylofuranose-modified diphosphine and their application as catalyst precursors in the co- and terpolymerization of CO-ethene and propene

The diphosphine 3,5-dideoxy-1,2-O-isopropylidene-3,5-bis(di(2-methoxyphenyl)phosphanyl)-alpha-D-xylofuranose (o-MeO-xylophos), which differs from the known 3,5-dideoxy-1,2-O-isopropylidene-3,5-bis(diphenylphosphanyl)-alpha-D-xylofuranose (xylophos) by the presence of 2-methoxy substituents on the P-aryl rings, has been synthesized and characterized. These two ligands have been employed to stabilize the Pd(II) complexes [PdCl2(o-MeO-xylophos)] (1a), [PdCl2(xylophos)] (2a), [PdClMe(o-MeO-xylophos)] (1b), [PdClMe(xylophos)] (2b), [Pd(OTs)(H2O)(o-MeO-xylophos)](OTs) (1c) and [Pd(OTs)(H2O)(xylophos)](OTs) (2c). All complexes have been characterized by multinuclear-NMR spectroscopy. The solid-state structure of 1a has been determined by a single crystal X-ray analysis. The Pd-aqua complexes 1c and 2c have been employed to catalyse the CO-ethene and CO-propene copolymerization as well as the CO-ethene-propene terpolymerization reaction in MeOH. The catalytic activity and the molecular weight of the polyketones have been compared to those of the products obtained with analogous catalysts, [Pd(H2O)2(o-MeO-dppp)](OTs)2 (3c) and [Pd(H2O)(OTs)(dppp)](OTs) (4c), bearing the classical 1,3-bis(diphenylphoshino)propane ligand (dppp). Under comparable catalytic conditions, all catalysts produce structurally similar polymeric materials, with 1c yielding the largest propene incorporation as well as the highest productivity of low-molecular-weight terpolymers.     

Coordination compounds of nickel with trithiocyanuric acid. Part II. Crystal and molecular structure of [Ni(taa)(ttcH)] (taa=tris-(2-aminoethyl)amine,ttcH3=trithiocyanuric acid)

Coordination compounds of compositions [Ni(taa) (ttcH)] (1), [Ni(teta)(ttcH)] (2), [Ni(sper)(ttcH)]·5H2O (3), [Ni(chxn)2(ttcH)] (4) and [Ni(1,3-pn)(ttcH)(H2O)] (5), where taa=tris-(2-aminoethyl)-amine, ttcH3= trithiocyanuric acid [1,3,5-triazine-2,4,6-trithione], teta=triethylenetetramine, sper= spermine [(N,N-bis-(3-aminopropyl)-1,4-butanediamine], chxn=trans-1,2-diaminocyclohexane, 1,3-pn=1,3-diaminopropane, (the ligands are depicted in Scheme 1) have been prepared and characterized by C, H, N, S analysis, i.r. and u.v.-vis. spectroscopies and magnetochemical measurements. Those complexes containing water were also studied by thermal analysis. X-ray analysis of [Ni-(taa)(ttcH)] revealed a trigonal bipyramidal geometry around the NiII centre, which can be increased to octahedral by a non-bonding interaction between Ni and the S atom of the trithiocyanuric dianion [Ni—S(3)= 2.6650(10) Å].     

Synthetic and structural chemistry of amidinate-substituted boron halides

The following new amidinate-substituted boron halides are reported: [PhC{N(SiMe(3))}(2)]BCl(2)(6), [MeC{NCy}(2)]BCl(2)(10), [Mes*C{NCy}(2)]BCl(2)(11), [MeC{N(i)Pr}(2)]BCl(2)(12), and [FcC{NCy}(2)]BBr(2)(13). Compound 6 was prepared via the trimethylsilyl chloride elimination reaction of BCl(3) with N,N,N'-tris(trimethylsilyl)benzamidine, and compounds 10-12 were prepared by salt metathesis between the lithium amidinates [RC(NR')(2)]Li and BX(3). Compound 13 was prepared via the insertion of 1,3-dicyclohexylcarbodiimide into the B-C bond of ferrocenyldibromoborane FcBBr(2). The molecular structures of 6, 10, 11, 13 and the known compound [PhC{N(SiMe(3))}(2)]BBr(2)(1) were established by single-crystal X-ray diffraction.     

A synthesis of heteroaromatic analogues of 1-methyl-1,2,3,4-tetrahydroisoquinoline using the Pummerer-type cyclization reaction: observation of tandem cyclization reaction

The sulfoxides 7b and 7d carrying thiophene or benzothiophene as heteroaromatic nucleophiles, when treated with trifluoroacetic anhydride at room temperature (Pummerer reaction), underwent an intramolecular alkylation in an exclusive manner to yield 4,5,6,7-tetrahydro-7-methyl-4-phenylsulfanylthieno[2,3-c]pyridine-6-carbaldehyde (10) and the corresponding benzothiophene derivative (12b) in high yields, respectively. Thus, this route provides biologically interesting nitrogen heterocycles (1b) and (2b). On the other hand, the sulfoxide (7c) carrying benzofuran as a nucleophile on reaction with TFAA yielded not only the Pummerer-type cyclization product (12a), but also the diastereoisomeric tandem cyclization products (13) and (14) having a noble 11-aza-2-oxa-7-thiatricyclo[4.3.3.0(1,5)]dodecane ring system (B). The formation of these products can be readily rationalized by the intervention of the oxonium ion intermediate (21).