Sterols of grapefruit,orange, and mandarin pulps

The composition and percentage distribution of the sterols in preparations of the free (I), glycosylated (II), and esterified (III) sterols in the pulp of citrus fruits have been studied. In the sterol preparations, cholesterol, campesterol, stigmasterol, and β-sitosterol have been identified and detected, and three other sterols have been detected but not identified. It has been established that the sequences of the relative amounts of sterols in preparations (I), (II), and (III) of the grapefruit and the orange are similar and differ from that of mandarin pulp.     

Determination of aliphatic alcohols, squalene, alpha-tocopherol and sterols in olive oils: direct method involving gas chromatography of the unsaponifiable fraction following silylation

In general, analyses for aliphatic alcohols, sterols and tocopherols in vegetable oils are performed separately. A simple and reliable procedure is presented for the quantification of the alkanols, squalene, alpha-tocopherol and sterols in olive oils by a direct method involving gas chromatographic (GC) analysis of the unsaponifiable fraction after silylation. The method eliminates the need for a preliminary thin-layer chromatographic (TLC) fractionation prior to GC. External standard calibration with reference substances was used for the quantification of squalene, alpha-tocopherol and sterols and internal standard calibration for the quantification of aliphatic alcohols. The analyte recovery and the repeatability of the quantitative results were evaluated and were acceptable for routine use.     

Synthesis,Characterization and Biospecific Degradation Behavior of Sulfated Chitin

Chitin is a polysaccharide found in the outer skeleton of insects, crabs, shrimps, and lobsters and in the internal structures of other invertebrates. Sulfated chitin was prepared by reacting carboxymethyl chitin (CM-chitin) with 2-aminoethane sulfonic acid by using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) catalyst. The prepared sulfated chitin was characterized by FTIR, elemental analysis, thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The degree of substitution was found to be 0.98 by elemental analysis. The TGA studies showed that sulfated chitin was less thermal stability than carboxymethyl chitin. This is due to the grafting reaction. The sulfated chitin membranes were prepared from sulfated chitin and then crosslink with glutaradehyde. The biodegradation process was performed in PBS (pH 7.4) containing lysozyme (10 µg/ml) at 37 °C in an incubator. Experimental results from weight loss throughout the study showed that the biospecific degradation occur on the membrane by lysozyme.     

Zirconium hydrocarbyl chemisorption on sulfated metal oxides: new supports, chemisorption pathways, and implications for catalysis

The sulfated metal oxides (SMOs) sulfated stannia (SnS), sulfated iron oxide (FeS), and sulfated titanium dioxide (TiS) have been synthesized and examined as support materials/cocatalysts/activators for molecule-based olefin polymerization and hydrogenation catalysis. (13)C CPMAS NMR spectroscopic analysis of Cp(2)Zr((13)CH(3))(2)/SMO chemisorption shows that cationic zirconocenium species are formed along with varying amounts of catalytically inactive micro-oxo (Cp(2)Zr(CH(3))O-surface) species, depending on the support material. Ethylene polymerization data with the supported catalysts show that polymerization activity is dependent on both precursor ligation [Zr(CH(2)Ph)(4) > (Me(5)Cp)ZrMe(3)] and the nature of the support (SnS > FeS > TiS). Poisoning studies were performed in conjunction with ethylene polymerization, mediated by (Me(5)Cp)ZrMe(3) supported on each SMO, and reveal that, for (Me(5)Cp)ZrMe(3)/SnS, 61 +/- 5% of the Zr sites are catalytically significant, while, for (Me(5)Cp)ZrMe(3)/FeS, this quantity is 22 +/- 2%, and for (Me(5)Cp)ZrMe(3)/TiS, 63 +/- 9%. These catalysts are also active for benzene hydrogenation and are separable from liquid-phase products using physical or, in the case of FeS, magnetic techniques.     

Die Glykoside der Wurzeln von Glossostelma carsoni (N. E. BR.) BULLOCK. Glykoside und Aglykone, 297. Mitteilung

Pentacyclic triterpenes, sterols, cardenolides and pregnane derivatives could be identified in extracts from roots of Glossostelma carsoni (N.E. BR .) Bullock. From the first group, the following substances could be isolated in crystalline form: β-amyrin, lupeol, their 3-O-acetyl derivatives, and 3-O-isovaleryl-β-amyrin. The sterols were isolated in the form of two mixed but crystalline fractions. The less polar fraction was shown to be a mixture of β-sitosterol, campesterol, stigmasterol, and cholesterol (stereoisomers are not excluded); the more polar fraction is probably a mixture of monohydroxy derivatives of the four above mentioned sterols.     

Minor and Trace Sterols in Marine Invertebrates. XII. Occurrence of 24 (R + S)-isopropenylcholesterol, 24 (R + S)-methylcholesta-5, 25-dien-3β-ol,and 24 (R + S)-methylcholesta-7, 25-dien-3β-ol in the caribbean sponge,Verongia cauliformis

In addition to the two new sterols verongulasterol 11 and 25-dehydroaplysterol 13 of Verongia cauliformis³), which were reported earlier [2] [3], the minor and trace sterols of this sponge include five new sterols listed in the title (with the exception of the known 24 S-methyl-cholesta-5, 25-dien-3β-ol (codisterol, 1b ). The isolation of the 24(R)-epimer of codisterol is of interest, as this compound is a possibly biosynthetic precursor for aplysterol 12 , 25-dehydroaplysterol 13 , and verongulasterol 11 (all 24R) which occur in the same sponge [2]. A partial synthesis from fucosterol ( 4 ) of 24 (R + S)-isopropenylcholesterol ( 9 ), and of 24-isopropylcholesterol ( 10 ) is described.     

Quantification of free and esterified sterols in Portuguese olive oils by solid-phase extraction and gas chromatography-mass spectrometry

A simple and accurate method based on solid-phase extraction (SPE), transesterification and gas chromatography-mass spectrometry (GC-MS) was developed for the quantitative analysis of free and esterified sterols of olive oil. In order to achieve better separation of esterified and free sterols, silica and alumina SPE adsorbents were tested. Separations by silica provided more reproducible results. The transesterification of both sterol fractions was found to be more user friendly than saponification as a method to liberate the sterols from the respective esters. The free sterols were then silylated with N,O-bis-trimethylsilyltrifluoroacetamide (BSTFA) with 1% of trimethylchlorosilane (TMCS). The most favourable conditions for exploitation of this reagent were established. The optimized methodology was suitable for evaluation of free and esterified sterols in Protected Designation of Origin (PDO) olive oils and monovarietal olive oils with different maturation indices. The prevailing phytosterols in all olive oils were beta-sitosterol and campesterol. The free sterols predominated, although they seemed to decrease with the maturation of the olive fruits.     

Semisynthesis of long-chain alkyl ether derivatives of sulfated oligosaccharides via dibutylstannylene acetal intermediates

Long-chain alkyl ether derivatives of sulfated oligosaccharides were semisynthesized as follows: two naturally occurring red seaweed galactans (neutral agarose and kappa-carrageenan) were submitted to partial reductive hydrolysis to give neutral and sulfated oligosaccharide alditols. The neutral disaccharide alditol (1) and its trityl ether (5) were sulfated and/or alkylated through formation of their dibutylstannylene or (bis)dibutylstannylene acetals. In these reactions, the dibutylstannylene acetals of the terminal 1,2-diols in the alditol units were more reactive than those formed on the cis-diols of the galactopyranosidic units. This property allowed the regioselective monoalkylation of a neutral tetrasaccharide alditol (2), which contained eleven free hydroxyl groups, the highest selectivity ever observed with dibutylstannylene acetals. An alkylated/sulfated derivative (11) was also obtained through the regioselective alkylation of a naturally sulfated disaccharide alditol (10, a kappa-carrageenan derivative).     

Non-aqueous capillary electrophoretic enantiomer separations using the tetrabutylammonium salt of heptakis(2,3-O-diacetyl-6-O-sulfo)-cyclomaltoheptaose, a single-isomer sulfated beta-cyclodextrin highly-soluble in organic solvents

The tetrabutylammonium salt of heptakis(2,3-di-O-acetyl-6-O-sulfo)-cyclomaltoheptaose, a single-isomer sulfated beta-cyclodextrin that is adequately soluble in a number of protic and aprotic polar solvents was synthesized on the large scale and used for the capillary electrophoretic separation of the enantiomers of weak bases in acidic acetonitrile background electrolytes. The effective mobilities and separation selectivities observed for these analytes followed trends similar to those found with other single-isomer sulfated cyclodextrins in acidic methanol background electrolytes. Enantiomer separations obtained with the tetrabutylammonium and sodium salts of heptakis(2,3-di-O-acetyl-6-O-sulfo)-cyclomaltoheptaose were different indicating, for the first time, that selection of the counter ion of the single-isomer sulfated cyclodextrin is also of importance for the separation of enantiomers.     

Capillary electrophoretic study of interactions of metal ions with crown ethers,a sulfated beta-cyclodextrin,and zwitterionic buffers present as additives in the background electrolyte

Stability constants of K, Na, Ca, and Ba with 18-crown-6, K, Na, Li with sulfated beta-cyclodextrin and K, Li, Ca, Mg, Sr, and Ba ions with ([2-hydroxy-1,1-bis(hydroxymethyl) ethyl]-amino)-1-propanesulfonic acid (TAPS) were determined by capillary electrophoresis and computed using a general least squares minimizing program CELET. The results for 18-crown-6 agreed well with those evaluated by graphical methods or reported in the literature. Previously unknown stability constants of sulfated beta-cyclodextrins and TAPS determined for alkali and alkaline earth metals show that sulfated beta-cyclodextrin interacts with monovalent metals allowing to manipulate their effective mobility. It interacts stronger with divalent metal cations. TAPS, as zwitterionic buffer widely used in various analytical, biochemical and other applications, forms complexes with alkali and alkaline earth cations, and although the stability constants are rather low, the equilibria should be taken into account when TAPS is used and metal cations are present in solution at the same time.     

蜈蚣藻中一种硫酸半乳聚糖的分离纯化、结构鉴定及其抗新生血管生成活性

为了寻找多糖类血管生成抑制剂, 我们以蜈蚣藻(Grateloupia filicina)为原料, 经水提、醇沉、DEAE-Sepharose Fast Flow和Sepharose CL-6B凝胶柱层析分离纯化, 得到一个均一多糖(GFP15).采用HPGPC、糖组成分析、绝对构型测定、甲基化分析、IR和NMR等技术对GFP15进行结构鉴定.结果表明, GFP15为一琼胶和卡拉胶中间型的硫酸半乳聚糖, 主要由1,3连接的β-D-半乳糖和1,4连接的2,3位硫酸基双取代的α-D-半乳糖交替组成, 1,3连接β-D-半乳糖的4位和6位上分别有少量的硫酸基取代, 1,4连接的半乳糖有少量是α-L-半乳糖, 此外, 还有极少量的木糖、3,6-脱水半乳糖和6-甲基-半乳糖.利用鸡胚尿囊膜法(CAM)对GFP15进行抗新生血管生成活性评价, 结果显示, GFP15(100 μg/egg)能抑制尿囊膜新生血管的形成, 提示GFP15 作为一种多糖类血管生成抑制剂具有开发为抗肿瘤药物的潜在价值.     

Enantiomeric separation of R,S‐tolterodine and R,S‐methoxytolterodine with negatively charged cyclodextrins by capillary electrophoresis

The methods for separation of R,S‐tolterodine and R,S‐methoxytolterodine enantiomers using sulfated α‐, β‐CD and phosphated‐γ‐CD by CE in acidic BGE based on Tris/phosphate pH 2.5 buffer were developed. Sulfated α‐ and β‐CD allow anodic detection while phosphated‐γ‐CD allows only cathodic detection of the separated enantiomers. The influence of chiral selector (CS)'s concentration as well as the influence of composition and concentration of BGE on resolutions were studied. Reversal migration order of tolterodine and methoxytolterodine enantiomers was observed, when sulfated‐α‐ and sulfated‐β‐CD were used. The developed methods with all three studied CSs, were validated and compared. All proposed methods enable determination of 0.2% of S‐tolterodine as an optical impurity in pills, however the method with phosphated‐γ‐CD provided lower detection limit, better repeatability of peak areas and migration times, and also lower consumption of CS. Developed method employing phosphated‐γ‐CD that was applied for the determination of optical purity of R‐tolterodine in commercial pills.     

Sulfated glycopolymer thin films - preparation, characterization, and biological activity

The impact of heparinoid characteristics on model surfaces obtained from immobilization of sole sulfate groups as well as sulfated glycosides, sulfated cellulose, and definite heparin has been investigated. The obtained layers were physico-chemically characterized regarding film thickness, chemical composition, wettability, and surface morphology. Antithrombin adsorption, studied by fluorescence labeling, revealed a strong dependence on the presence of glycosidic structures and on the molecular weight of the grafted saccharide. On contact with whole blood, the coatings resulted in a diminished plasmatic and cellular coagulation in vitro, which did not reflect well the antithrombin binding. Therefore, more complex activating pathways are discussed.     

Phylattrin, a new cytotoxic xanthone from Calophyllum soulattri

Our continuing studies on secondary metabolites from the stem bark of Calophyllum soulattri has led to the isolation of another new diprenylated xanthone, phylattrin (1), in addition to five other xanthones and two common sterols. The xanthones are soulattrin (2), caloxanthone C (3), macluraxanthone (4), brasixanthone B (5) and trapezifolixanthone (6) while the sterols are stigmasterol (7) and β-sitosterol (8). The structures of these compounds were determined on the basis of spectroscopic analyses such as 1D and 2D-NMR, HRESIMS, IR and UV. Compounds 1-7 exhibited moderate cytotoxic activities against SNU-1, HeLa, Hep G2, NCI-H23, K562, Raji, LS174T, IMR-32 and SK-MEL-28 cells.     

Separation of C27, C28 and C29 sterols by reversed-phase high-performance liquid chromatography on small particles.

The application of reversed-phase high-performance liquid chromatography to the analytical- and preparative-scale separation of sterols has been evaluated. The capacity factors, k', for a number of compounds chromatographed on a muBondapak C18 (LESS THAN 10 MUM) COLUMN ARE PRESENTED. C27, C28 and C29 sterols and also sterols differing in degree of unsaturation could be readily separated as their acetates in this system. The present reversed-phase chromatographic method is apparently not as selective as silver nitrate-silica gel thin-layer chromatography for the position of unsaturation in the sterol molecule.     

Steroid compounds of marine sponges. VIII. 24-Isopropyl-5α-cholest-22-ene-2β,3α,6α-triol trisulfate — A new steroid identified in the spongeTrachyopsis halichondrioides

A new sulfated steroid triol has been identified in extracts of the spongeTrachyopsis halichondrioides and its structure has been established as 24-isopropyl-5-cholest-22-ene-2,3,6-triol trisulfate. The possibility has been shown for the first time of the existence of identical side chains for free sterols and trisulfated steroids.Pacific Ocean Institute of Bioorganic Chemistry, Far Eastern Scientific Center, Academy of Sciences of the USSR, Vladivostok. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 111–115, January February, 1986.     

Effect of barium loading on the desulfation of Pt-BaO/Al2O3 studied by H2 TPRX, TEM, sulfur K-edge XANES, and in situ TR-XRD

Desulfation processes were investigated over sulfated Pt-BaO/Al2O3 with different barium loading (8 and 20 wt %) by using H2 temperature programmed reaction (TPRX), transmission electron microscope (TEM) with energy dispersive spectroscopy (EDS), sulfur K-edge X-ray absorption near-edge spectroscopy (XANES), and in situ time-resolved X-ray diffraction (TR-XRD) techniques. Both sulfated samples (8 and 20 wt %) form sulfate species (primarily BaSO4) as evidenced by S K-edge XANES and in situ TR-XRD. However, the desulfation behavior is strongly dependent on the barium loading. Sulfated Pt-BaO8/Al2O3, consisting predominantly of surface BaO/BaCO3 species, displays more facile desulfation by H2 at lower temperatures than sulfated Pt-BaO20/Al2O3, a material containing primarily bulk BaO/BaCO3 species. Therefore, after desulfation with H2 up to 1073 K, the amount of the remaining sulfur species on the former, mostly as BaS, is much less than that on the latter. This suggests that the initial morphology differences between the two samples play a crucial role in determining the extent of desulfation and the temperature at which it occurs. It is concluded that the removal of sulfur is significantly easier at lower barium loading. This finding can potentially be important in developing more sulfur resistant LNT catalyst systems.     

Purification,Characterization, and Structural Studies of a Sulfatase from Pedobacter yulinensis

Sulfatases are ubiquitous enzymes that hydrolyze sulfate from sulfated organic substrates such as carbohydrates, steroids, and flavones. These enzymes can be exploited in the field of biotechnology to analyze sulfated metabolites in humans, such as steroids and drugs of abuse. Because genomic data far outstrip biochemical characterization, the analysis of sulfatases from published sequences can lead to the discovery of new and unique activities advantageous for biotechnological applications. We expressed and characterized a putative sulfatase (PyuS) from the bacterium Pedobacter yulinensis. PyuS contains the (C/S)XPXR sulfatase motif, where the Cys or Ser is post-translationally converted into a formylglycine residue (FGly). His-tagged PyuS was co-expressed in Escherichia coli with a formylglycine-generating enzyme (FGE) from Mycobacterium tuberculosis and purified. We obtained several crystal structures of PyuS, and the FGly modification was detected at the active site. The enzyme has sulfatase activity on aromatic sulfated substrates as well as phosphatase activity on some aromatic phosphates; however, PyuS did not have detectable activity on 17α-estradiol sulfate, cortisol 21-sulfate, or boldenone sulfate.     

Synthesis of polymethacrylate derivatives having sulfated maltoheptaose side chains with anti‐HIV activities

Anti‐HIV (human immunodeficiency virus) active polymethacrylates having pendant sulfated oligosaccharides were synthesized, and the relationship between structures and biological activities of the polymethacrylates was examined. Acetylated 1‐O‐methacryloyl maltoheptaoside (MA‐AcM7) was polymerized with AIBN as an initiator to give polymethacrylates having a pendant acetylated maltoheptaose in every repeating unit, poly(MA‐AcM7)s. After hydroxyl groups were recovered by deacetylation, the polymethacrylates having maltoheptaose units, poly(MA‐M7)s, were sulfated to give polymethacrylates having sulfated maltoheptaose side‐chains, poly(MA‐SM7)s, with degrees of sulfation of 1.1 to 2.7 (maximum, 3.0). These polymethacrylates including sulfated oligosaccharides exhibited low anti‐HIV activities represented by the 50% protecting concentration (EC₅₀) in the range of 15–62 μg/mL and low blood anticoagulant activities around 10 unit/mg (standard dextran sulfate, 22.7 unit/mg). The anti‐HIV activity increased with increasing degree of sulfation to reach EC₅₀ of 15–16 μg/mL. In addition, copolymerization of MA‐AcM7 with methyl methacrylate (MMA) and subsequent sulfation gave polymethacrylates consisting of various proportions of highly sulfated maltoheptaose and MMA units. It was revealed that the anti‐HIV activity increased with decreasing proportion of the sulfated oligosaccharide moiety and that a copolymethacrylate having 22 mol % of sulfated maltoheptaose units (DS = 3.0) had a high anti‐HIV activity in the EC₅₀ of 0.3 μg/mL. The blood anticoagulant activity increased slightly from 9 to 18 unit/mg with decreasing proportion of the sulfated maltoheptaose units. These results suggested that the biological activities were influenced strongly by the spatial distance between sulfated oligosaccharide substituents in the polymethacrylate main chain. Distinction and conformation of the oligosaccharide side chains also played an important role. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 789–800, 1999     

The impact of sterol structure on the interactions with sphingomyelin in mixed langmuir monolayers

In this work, the Langmuir monolayer technique was applied to study the interactions between sphingomyelin and various sterols differing in the structure of the side chain (cholesterol, beta-sitosterol, stigmasterol). The mean area per molecule and the excess free energy of mixing values were analyzed in the context of sterol-induced condensing effect and interactions between molecules in the mixed monolayers. Moreover, the compression modulus values were calculated and widely discussed from the point of view of the ordering effect of sterols. It was found that all of the sterols investigated form the most stable monolayers with sphingomyelin at 2:1 sphingomyelin:sterol proportion and the strongest interactions exist between molecules in cholesterol-containing films. Moreover, cholesterol provokes the strongest area condensation and reveals the highest ordering properties, while plant sterols were found to differ only slightly with regards to their ordering properties. Additionally, the ordering effect of the sterols on dipalmitoylphosphatidylcholine (DPPC) films was analyzed and compared to that on sphingomyelin films.