Pyroelectric properties of CaCu3Ti4O12 thin films grown by pulsed laser deposition

A pyroelectric behavior was observed in CaCu₃Ti₄O₁₂ films and the pyroelectric coefficient was measured to be 1.35×10^?7 C/cm²?K for a film with thickness of 700 nm from 295 K to 340 K, larger than those of most pyroelectric materials. It was observed that the pyroelectric coefficient increased with the thickness of films from 300 to 700 nm. The origin of pyroelectric effect is proposed to depend on the distortion of the Ti–O octahedron due to the presence of Ti³⁺ ions. Comparing with the measurement result of an unpolarized film, our study strongly supports the interpretation of relaxor ferroelectric behavior in CaCu₃Ti₄O₁₂.     

Surface morphology and surface chemical states of epitaxial Pb(Zr0.95Ti0.05)O3 thin films grown on SrTiO3(100) by sputter deposition

0.95 Ti_0.05)O₃ thin films of an orthorhombic perovskite structure were obtained on SrTiO₃(100) substrates by radio frequency sputter deposition. The surface morphology of the films was investigated with atomic force microscopy, scanning electron microscopy, and reflection electron microscopy. It is shown that the film surfaces are rather bumpy. There are undulations of about 400 nm in length in an in-plane direction. The mean roughness perpendicular to the surface is 39.6 nm, for the film thickness of 0.45 μm. The surface roughening was probably caused by island-shaped nucleation and growth during the film growth. It has also been found that some gorges and a number of small pits remain at the film surfaces. The surface chemical states of the films were characterized by using X-ray photoelectron spectroscopy. A Pb enrichment layer and a large amount of adsorbed oxygen have been found at the surfaces of the films. Near the film surface Pb and Zr exist mainly in the forms of, besides Pb(Zr,Ti)0₃, metal Pb, metal Zr, oxygen-chemisorbed Pb, and various lead oxides. In addition, a small amount of lead, whose binding energy of Pb 4f_7/2 is much lower than that of metal Pb, was observed at the film surfaces, but its chemical state is unknown up to now. Received: 2 June 1997/Accepted: 22 September 1997     

Photovoltaic effect in thin film of Pb(Zr,Ti)O3 evaporated on stainless steel

A dc photovoltaic effect has been observed in thin films of Pb(Zr, Ti)O₃ evaporated on stainless steel, in the absence of applied field. The spectral photovoltaic response of the film has a peak sensitivity around 4000 Å. The photovoltage exists only below the Curie temperature. The film device becomes semiconductive under illumination.     

Effect of Ti doping on Ta2O5 stacks with Ru and Al gates

The Ti-doped Ta₂O₅ thin films (<10 nm) obtained by rf sputtering are studied with respect to their composition, dielectric and electrical properties. The incorporation of Ti is performed by two methods - a surface doping, where a thin Ti layer is deposited on the top of Ta₂O₅ and a bulk doping where the Ti layer is sandwiched between two layers of Ta₂O₅. The effect of the process parameters (the method and level of doping) on the elemental distribution in-depth of the films is investigated by the time of flight secondary ion mass spectroscopy (ToF-SIMS). The Ti and Ta₂O₅ are intermixed throughout the whole thickness but the layers are very inhomogeneous. Two sub-layers exist in all the samples — a near interfacial region which is a mixture of Ta-, Ti-, Si-oxides as well as TaSiO, and an upper Ti-doped Ta₂O₅ sub-layer. For both methods of doping, Ti tends to pile-up at the Si interface. The electrical characterisation is performed on capacitors with Al- and Ru-gate electrodes. The two types of MIS structures exhibit distinctly different electrical behavior: the Ru gate provides higher dielectric permittivity while the stacks with Al electrode are better in terms of leakage currents. The specific metal-dielectric reactions and metal-induced electrically active defects for each metal electrode/high-k dielectric stack define its particular electrical behavior. It is demonstrated that the Ti doping of Ta₂O₅ is a way of remarkable improvement of leakage characteristics (the current reduction with more than four orders of magnitude as compared with undoped Ta₂O₅) of Ru-gated capacitors which originates from Ti induced suppression of the oxygen vacancy related defects.     

Effect of buffer layers on the property of Pb(Zr,Ti)O3-Pb(Mn,W,Sb,Nb)O3 thin films grown by pulsed laser deposition

New ferroelectric Pb(Zr,Ti)O₃-Pb(Mn,W,Sb,Nb)O₃ (PZT-PMWSN) thin film has been deposited on a Pt/Ti/SiO₂/Si substrate by pulsed laser deposition. Buffer layer was adopted between film and substrate to improve the ferroelectric properties of PZT-PMWSN films. Effect of a Pb(Zr_0.52Ti_0.48)O₃ (PZT) and (Pb_0.72La_0.28)Ti_0.93O₃ (PLT) buffer layers on the stabilization of perovskite phase and the suppression of pyrochlore phase has been examined. Role of buffer layers was investigated depending on different types of buffer layer and thickness. The PZT-PMWSN thin films with buffer layer have higher remnant polarization and switching polarization values by suppressing pyrochlore phase formation. The remnant polarization, saturation polarization, coercive field and relative dielectric constant of 10-nm-thick PLT buffered PZT-PMWSN thin film with no pyrochlore phase were observed to be about 18.523 μC/cm², 47.538 μC/cm², 63.901 kV/cm and 854, respectively.     

Structure-related infrared optical properties of BaTiO3 thin films grown on Pt/Ti/SiO2/Si substrates

BaTiO₃ thin films with different thickness have been grown on Pt/Ti/SiO₂/Si substrates by a modified sol-gel method. X-ray diffraction analyses show that the BaTiO₃ thin films are polycrystalline. The crystalline quality of the films is improved with increasing thickness. The infrared optical properties of the BaTiO₃ thin films have been investigated using an infrared spectroscopic ellipsometry in the wave number range of 800-4000 cm⁻¹ (2.5-12.5 μm). By fitting the measured pseudodielectric functions with a three-phase model (Air/BaTiO₃/Pt), and a derived classical dispersion relation for the thin films, the optical constants and thicknesses of the thin films have been simultaneously obtained. The refractive index of the BaTiO₃ thin films increases and on the other hand, the extinction coefficient does not change with increasing thickness in the entirely measured wave number range. The dependence of the refractive index on the film thickness has been discussed in detail and was mainly due to both the crystalline quality of the films and packing density. Finally, the absorption coefficient was calculated in the infrared region for applications in the pyroelectric IR detectors.     

Multiferroic and resistive switching behaviors in BiFe0.95Cr0.05O3 thin films deposited on Pt/Ti/SiO2/Si substrates

Multiferroic and resistive switching properties of single-phase polycrystalline perovskite BiFe_0.95Cr_0.05O₃ (BFCO) thin films grown on Pt/Ti/SiO₂/Si substrates by radio-frequency magnetron sputtering were investigated. The BFCO film shows ferroelectric and magnetic properties simultaneously at room temperature, and also exhibits a good piezoelectric property with remanent effective piezoelectric coefficient d _33,f ～55±4 pm/V. An obviously resistive switching behavior was observed in the BFCO thin film at room temperature, which was discussed by the filamentary conduction mechanism associated with the redistribution of oxygen vacancies.     

Ferromagnetism of epitaxially grown CaRu1−xMxO3 (M=Ti, Mn) films

Epitaxial thin films of CaRu_1−xM_xO₃ (M=Ti, Mn) were fabricated on a (0 0 1)-SrTiO₃ substrate by spin-coat method using organometallic solutions (metal alkoxides). Results of X-ray diffraction and transmission electron microscopy indicate that the epitaxial films were grown pseudomorphically so as to align the [0 0 l] axis of the CaRu_1−xM_xO₃ films perpendicular to the (0 0 1) plane of the SrTiO₃ substrate. Ferromagnetism and metal-insulator transition are induced by the substitution of transition metal ions. The occurrence of ferromagnetism was explained qualitatively assuming a TiRu₆ cluster model for CaRu_1−xTi_xO₃ film and a mixed valence model for CaRu_1−xMn_xO₃ film. Ferromagnetism was also observed for layered CaRuO₃/CaMnO₃ film and CaRuO₃/CaMnO₃/CaRuO₃/CaMnO₃ multilayer film and the magnetism was explained by an interfacial exchange interaction model with magnetic Mn³⁺, Mn⁴⁺, and Ru⁵⁺ ions.     

TiSi mixing at room temperature: A high resolution ion backscattering study

Very thin Ti films (0–20 Å) have been deposited in ultra-high vacuum on atomically clean Si(111) surfaces. The films have been analyzed with Medium Energy Ion Scattering using the high depth resolution of this technique in combination with ion shadowing and blocking. The measurements show that mixing of Ti and Si already occurs at room temperature, for coverages below 2.8 × 10¹⁵ Ti atoms/cm². The composition of the uniformly mixed film is close to TiSi. For higher coverages no further mixing takes place and pure Ti is present on top of the ultrathin mixed film. The implications of these results for current silicide formation models are discussed.     

Structural and dielectric properties of Bi4Ti3O12 thin films prepared by metalorganic solution deposition

Ferroelectric Bi₄Ti₃O₁₂ thin films with single phase and nanosized microstructure were prepared on Pt/Ti/SiO₂/Si(111) substrate by metalorganic solution deposition using titanium butoxide and bismuth nitrate at relatively low annealing temperatures. The internal strain in Bi₄Ti₃O₁₂ thin films was calculated from the peak shifts and broadening of XRD patterns. With increase in annealing temperature, the uniform strain decreased from positive to zero and then to negative, and the non-uniform strain decreased and was negative. The total strain was negative and in the range of -0.2%–-1.0%, from which the stress of the films was calculated to be about -1.4×10⁹ N/m². The mode values of strain decreased with increase in annealing temperature and increased with increase in film thickness. The dielectric constant increased with increase in annealing temperature and film thickness. The dielectric properties were interpreted by considering the influence of strain, grain size, and grain boundaries. The strain lowered the polarization and increased the dielectric constant. The larger the grain size and the thinner the grain boundary, the greater the dielectric constant. The influence of grain size and grain boundary was stronger than that of the strain. Received: 23 September 1998 / Accepted: 6 January 1999 / Published online: 24 March 1999     

A theory of thin metal films: electron density,potentials and work function

Electron densities, potentials, and work functions of thin metal films are calculated self-consistently. The planar uniform-background model and the density-functional formalism are used similarly as in the theory of metal surfaces by Lang and Kohn. Electron densities and potentials are discussed for r_s = 4 both as function of the position in the film and of film thickness. Numerical results for the dependence of the work function on film thickness are given for r_s = 2, 3, 4, 5, 6. As functions of film thickness electron densities, potentials and work functions show oscillations with a period of one-half the Fermi wavelength. The amplitude of the oscillations in potentials and work functions is about 1 eV for one monolayer and 0.1 eV for films of 20 Å thickness. A comparison with non-self-consistent calculations reveals the necessity of self-consistent computations. The relevance of the results to work function measurements and to investigations of thermodynamic and transport properties are discussed. The influence of the film geometry on calculations designed for surfaces per se is examined.     

Microstructure and dielectric properties of pulsed-laser-deposited CaCu 3 Ti 4 O 12 thin films on LaNiO 3 buffered Pt/Ti/SiO 2 /Si substrates

CaCu₃Ti₄O₁₂ (CCTO) thin films have been prepared by a pulsed-laser-deposition method on LaNiO₃ buffered Pt/Ti/SiO₂/Si substrates, and their microstructure and dielectric properties have been compared with those of the films deposited directly on Pt/Ti/SiO₂/Si substrates. The crystalline structure and the surface morphology of the CCTO thin films were markedly affected by the bottom electrodes. Both the films show temperature-independent dielectric properties in a wide temperature range, which is similar to those properties obtained in single-crystal or epitaxial thin films, while the room-temperature dielectric constant of the 350-nm-thick CCTO films on LaNiO₃/Pt/Ti/SiO₂/Si substrates at 100 kHz was found to be 2300, which was increased significantly compared with that obtained in the films on Pt/Ti/SiO₂/Si substrates. Using the impedance spectroscopy technique, it has been suggested that the high dielectric constant response of the CCTO thin films originates from the grain boundary layer mechanism as found in internal barrier layer capacitors. PACS 77.55.+f; 81.15.Fg; 68.55.-a     

Nanoscale Analysis of Multilayer Interfaces of W/Al2O3/Ti/Cu

W, Al₂O₃ and Ti films were deposited onto a Cu substrate by means of the rf magnetron sputtering method. After deposition, the foils were annealed at various temperatures in vacuum and the interfaces of the films were observed by a field-emission transmission electron microscopy (FE-TEM), after preparing a cross-sectional thin foil using a focused ion beam (FIB) machine. After annealing the foil at 473 and 623 K, no reaction phases were identified at each interface of W/Al₂O₃, Al₂O₃/Ti and Ti/Cu-substrate. However, from the results of compositional analysis at the interface of Al₂O₃/Ti bilayer, after heat-treatment at 623 K, the formation of an oxide layer was suggested even though it was not clearly observed. On the other hand, after heat-treatment at 823 K, the formation of CuTi₂, Cu₃Ti₂ and Cu₄Ti phases were identified at the interface of Ti/Cu bilayers from the compositional analysis of reaction layers after heat-treatment at different temperatures, and the diffusion coefficients and activation energies in the phases were evaluated. In this paper, the influence of heat-treatment on the interfacial behavior of multilayer are discussed on the basis of nanoscale analysis by EDS and HRTEM images.     

2-2型磁电复合薄膜CoFe2O4/Pb(Zr0.53Ti0.47)O3静磁耦合

运用溶胶-凝胶法在Pt/Ti/SiO₂/Si基片上旋涂制备了2-2型CoFe₂O₄/Pb(Zr_0.53Ti_0.47)O₃磁电复合薄膜．制备的磁电薄膜结构为基片/PZT/CFO/PZT*/CFO/PZT,通过改变中间层PZT*溶胶的浓度,改变磁性层间距以及静磁耦合的大小．SEM结果表明,复合薄膜结构致密,呈现出界面清晰平整的多层结构．制备的复合薄膜具有较好的铁电与铁磁性能．实验还研究了静磁耦合对薄膜磁电性能的影响,结果表明,随着复合薄膜磁性层间距的减小,静磁耦合效应的增加,磁电电压系数有逐渐增大的趋势.     

Erosion of solid D2 by 2 keV electrons

The erosion/sputtering of D₂ films on an Au-substrate by 2 keV electrons is roughly inversely proportional to film thicknesses below ≈650 Å. The erosion yield decreases from 200 atoms/electron at 25 Å to 7.8 ± 0.5 for “bulk” targets. The thickness dependent region is apparently unrelated to the penetration depth of the electrons.     

Room-temperature pulsed laser deposition and dielectric properties of amorphous Bi3.95Er0.05Ti3O12 thin films on conductive substrates

Bi_3.95Er_0.05Ti₃O₁₂ (BErT) thin films were prepared on Pt/Ti/SiO₂/Si and indium-tin-oxide (ITO)-coated glass substrates at room temperature by pulsed laser deposition. These thin films were amorphous with uniform thickness. Excellent dielectric characteristics have been confirmed. The amorphous BErT thin films deposited on the Pt/Ti/SiO₂/Si and ITO-coated glass substrates exhibited almost the same dielectric constant of 52 with a low dielectric loss of less than 0.02 at 1 kHz. Meanwhile, the dielectric properties of the thin films had an excellent bias voltage stability and thermal stability. The amorphous BErT thin films might have potential applications in microelectronic and optoelectronic devices.     

Au/TiO2/Ru(0 0 0 1) model catalysts and their interaction with CO

Au/TiO₂/Ru(0 0 0 1) model catalysts and their interaction with CO were investigated by scanning tunneling microscopy and different surface spectroscopies. Thin titanium oxide films were prepared by Ti deposition on Ru(0 0 0 1) in an O₂ atmosphere and subsequent annealing in O₂. By optimizing the conditions for deposition and post-treatment, smooth films were obtained either as fully oxidized TiO₂ or as partly reduced TiO_x, depending on the preparation conditions. CO adsorbed molecularly on both oxidized and reduced TiO₂, with slightly stronger bonding on the reduced films. Model catalyst surfaces were prepared by depositing submonolayer quantities of Au on the films and characterized by X-ray photoelectron spectroscopy and scanning tunneling microscopy. From X-ray photoelectron spectroscopy, a weak interaction between the Au and the TiO₂ substrate was found. At 100 K CO adsorption occurred on both the TiO₂ film and on the Au nanoparticles. CO desorbed from the Au particles with activation energies between 53 and 65 kJ/mol, depending on the Au coverage. If the Au deposit was annealed to 770 K prior to CO exposure, the CO adsorption energy decreased significantly. STM measurements revealed that the Au particles grow upon annealing, but are not encapsulated by TiO_x suboxides. The higher CO adsorption energy observed for smaller Au coverages and before annealing is attributed to a significantly stronger interaction of CO with mono- and bilayer Au islands, while for higher particles, the adsorption energy becomes more bulk-like. The implications of these effects on the known particle size effects in CO oxidation over supported Au/TiO₂ catalysts are discussed.     

Auger and X-ray photoelectron spectroscopic and electrochemical characterization of titanium thin film electrodes

Auger (AES) and X-ray photoelectron spectroscopic (XPS) characterizations of electrochemically oxidized titanium are described. Surface oxides on thin (200–250 Å) vacuum deposited titanium films were formed under conditions of linear potential scan in 1 N KClO₄, 1 N HClO₄ and 1 N H₂SO₄. Current/voltage, capacitance/voltage and surface conductance/voltage relationships confirmed the irreversible formation of the surface oxide at thickness of 20–30 Å/V, for low applied potentials. Post moretem analysis of the thin films by AES and XPS indicated a mixture of metal and metal oxides (TiO₂, Ti₂O₃, TiO) on each surface, with the higher oxide states predominating on the electrochemically oxidized films. Observation of the L_IIIM_2,3M_4,5, N(E) signal shape in the Auger spectra of the potentially oxidized oxidized films showed a suboxide TiO-like surface rather than an TiO₂ surface state. Deconvolution of the $\text{Ti}\text{(2}\text{p}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext><mtext>,\; </mtext><mtext>3</mtext><mtext>2</mtext>}}\text{)}\text{XPS}$ spectra confirmed the coexistence of multiple oxidation states of Ti during electrochemical or atmospheric oxidation of the films. Ion sputtering of each surface was used to characterize the subsurface metal/metal oxide composition and to correlate the oxygen to metal atomic ratio with electrochemical pretreatment.     

不同氧气流量对直流磁控溅射TiO2薄膜的影响

采用直流反应磁控溅射法,以高纯Ti为靶材,高纯O₂为反应气体,制备了TiO₂薄膜.研究了氧气流量对薄膜结晶取向、表面形貌和光学性能的影响.研究发现,TiO₂薄膜主要呈锐钛矿TiO₂(101)择优取向,当氧气流量较小时,薄膜中还含有金属Ti(100),氧气流量较大时,薄膜含TiO₂(101)和TiO₂(004),成多晶态;薄膜的粗糙度和颗粒大小都随氧气流量的增大而增大;薄膜在400~1100nm可见-近红外波段有较高的透射率并且其吸收峰随着氧气流量的增大而红移,当氧气流量为5sccm时,平均透射率最高.     

Quenching of excited strontium atomic state measured in H2- and CO-flames

The efficiency of resonance fluorescence, Y, of the strontium resonance line (¹P₁→¹S₀ transition) at 4607.33 Å was measured in CO/N₂O, CO/O₂/Ar, and H₂/O₂/CO₂/N₂ flames at atmospheric pressure. From these data, the specific quenching cross sections, σ_qu, for CO₂ and CO were found to be (60 ± 10) Ų and  (300 ± 60) Ų, respectively. The experimental cross sections were confronted with the intermediate ionic-state curve-crossing model and chemical quenching model, respectively.