Efficient synthesis and hydrolysis of cyclic oxalate esters of glycols

Based on the mechanism postulated for the formation of the cyclic carbonates 3 in the reactions of glycols 1 with oxalyl chloride in the presence of triethylamine, we present here three efficient syntheses of the cyclic oxalates 2 of various glycols 1 by controlling the formation of 3: replacement of the base by pyridine markedly diminishes yields of 3 in all reactions, realizing dramatic reversals of the product ratios in the reactions with the (R*,R*)-compounds 1g-i,q,r and pinacol (1k); although considerable amounts of the oxalate polymers are formed in the reactions with some (R*,S*)-glycols, this drawback can be removed by the use of 2,4,6-collidine instead of pyridine; 1,1'-oxalyldiimidazole is useful for the synthesis of two selected cyclic oxalates 2e,f. The cyclic oxalates 2 other than trisubstituted and tetrasubstituted ones were found to be very reactive: kinetic studies on the hydrolysis of 1,4-dioxane-2,3-dione (2a) as well as its mono- and some selected 5,6-disubstituted derivatives 2 have revealed that they undergo hydrolysis 260-1500 times more rapidly than diethyl oxalate (12) in acetate buffer-acetonitrile (pH 5.69) at 25 degrees C. Although the cyclic oxalate 21 from cis-1,2-cyclopentanediol (11) was 1.5 times more reactive than 2a, it has been shown with other substrates that increasing number of the alkyl substituents decreases the rate of hydrolysis. On the contrary, the phenyl group was found to have somewhat accelerative effect.     

Development of chiral nucleophilic pyridine catalysts: applications in asymmetric quaternary carbon synthesis

TADMAP (1a), a new chiral DMAP catalyst, has been designed to place a C(3)-benzylic trityl group over one face of the pyridine ring, while a C(3)-benzylic acetoxy group creates a chirotopic environment on the other face. TADMAP was prepared in four steps (37% overall) from triphenylacetic acid and (dimethylamino)pyridine and was resolved using camphorsulfonic acid. TADMAP catalyzes the enantioselective rearrangement from oxazolyl phenyl carbonates 4 to azlactones 5, from furanyl phenyl carbonate 8 to the furanone 9, from the benzofuranyl carbonates 11a and 11b to benzofuranones 12a and 12b, and from the indolyl carbonates 11c and 11d to oxindoles 12c and 12d. The products are formed in good yield and, in most cases, with practical levels of enantiomer excess at the newly formed quaternary carbon.     

Influence of the heterocyclic side ring on orientation during nitrations of 1,2-alkylenedioxy-annelated benzenes and their mononitro derivatives

Nitration of 1,2-alkylenedioxybenzenes 1 furnished the respective nitro derivatives 3 and 4 in the relative ratios: 4a:3a /100:trace, 4b:3b /98:2.4, 4c:3c /86:14, 4e:3e /91:9 and 4f:3f /99:1.3. Nitration of 4 gave 5a:6a:8a /0:0:100, 5b:6b:8b /7.7:3.2:89, 5c:6c:8c /23:12:65, 5d:6d:8d /14:74:12, 5e:6e:8e /27:18:55 and 5f:6f:8f /23:7.0:70. Nitration of the isomeric 3 afforded the dinitro products 5, 6 and 7 in the following relative ratios: 5a:6a:7a /92:8:0, 5b:6b:7b /80:20:0, 5c:6c:7c /69:20:1 1, 5d:6d:7d /45:19:36, 5e:6e:7e /37:57:5.9 and 5f:6f:7f /64:36:0. Nitration of 3-nitro-1,2-dimethoxybenzene ( 9 ) furnished: 10:11 /63:37. Orientation as a function of the heterocyclic ring-size is discussed.     

Isocyanate‐ and Phosgene‐Free Routes to Polyfunctional Cyclic Carbonates and Green Polyurethanes by Fixation of Carbon Dioxide

The catalytic chemical fixation of carbon dioxide by carbonation of oxiranes, oxetanes, and polyols represents a very versatile green chemistry route to environmentally benign di‐ and polyfunctional cyclic carbonates as intermediates for the formation of non‐isocyanate poly­urethane (NIPU). Two synthetic pathways lead to NIPU thermoplastics and thermosets: i) polycondensation of diacarbamates or acyclic dicarbonates with diols or diamines, respectively, and ii) polyaddition by ring‐opening polymerization of di‐ and polyfunctional cyclic carbonates with di‐ and polyamines. The absence of hazardous and highly moisture‐sensitive isocyanates as intermediates eliminates the need for special safety precautions, drying and handling procedures. Incorporated into polymer backbones and side chains, carbonate groups enable facile tailoring of a great variety of urethane‐functional polymers. As compared with conventional polyurethanes, ring‐opening polymerization of polyfunctional cyclic carbonates affords polyhydroxyurethanes with unconventional architectures including NIPUs containing carbohydrate segments. NIPU/epoxy hybrid coatings can be applied on wet surfaces and exhibit improved adhesion, thermal stability and wear resistance. Combining chemical with biological carbon dioxide fixation affords 100% bio‐based NIPUs derived from plant oils, terpenes, carbohydrates, and bio polyols. Biocompatible and biodegradable NIPU as well as NIPU biocomposites hold great promise for biomedical applications.

     

Enzymatic Synthesis and Polymerization of Cyclic Trimethylene Carbonate Monomer with/without Methyl Substituent

The direct enzymatic synthesis of a cyclic trimethylene carbonate (1,3‐dioxane‐2‐one) monomer with/without a methyl substituent was carried out using dimethyl or diethyl carbonate and 1,3‐diol with the objective of producing aliphatic poly(trimethylene carbonate), a typical biodegradable synthetic plastic. The lipase‐catalyzed condensation of dimethyl or diethyl carbonate with aliphatic 1,3‐diols using immobilized Candida antarctica lipase (lipase CA) in an organic solvent at 70 °C afforded the corresponding methyl‐substituted and unsubstituted cyclic trimethylene carbonates. The cyclic trimethylene carbonates obtained by the reaction of dimethyl or diethyl carbonates with 1,3‐propanediol and 2‐methyl‐1,3‐propanediol were polymerized by lipase to produce the corresponding polycarbonates.

Total TMC yield as a function of the reaction time.     

Convenient syntheses of dibenzo[c,p]chrysene and its possible proximate and ultimate carcinogens: in vitro metabolism and DNA adduction studies

Dibenzo[c,p]chrysene (DB[c,p]C) is the only hexacyclic polycyclic aromatic hydrocarbon having two fjord regions, both in different chemical environments. Its environmental presence and relative tumorigenic potency are not known due to the lack of synthetic standards. We report here the synthesis of dibenzo[c,p]chrysene (1), its proximate carcinogens, i.e., trans-1,2-dihydroxy-1,2-dihydro-DB[c,p]C (2) and trans-11,12-dihydroxy-11,12-dihydro-DB[c,p]C (3), and possible ultimate carcinogens, i.e., anti-trans-1,2-dihydroxy-3,4-epoxy-1,2,3,4-tetrahydro-DB[c,p]C (4) and anti-trans-11,12-dihydroxy-13,14-epoxy-11,12,13,14-tetrahydro-DB[c,p]C (5). The syntheses of 1 and the appropriately methoxy-substituted DB[c,p]C (12 and 27), key intermediates for the synthesis of its proximate and ultimate metabolites, were tried first using a Suzuki cross-coupling reaction. However, the cyclization of olefins (10 and 11) gave poor yields of the desired products. An alternate method was thus developed employing a photochemical approach. The in vitro metabolism of DB[c,p]C was established with the S9 fraction of liver homogenate from phenobarbital/beta-naphthoflavone-induced Sprague-Dawley rats. The major dihydrodiol formed was identified as the fjord region 11,12-dihydroxy-11,12-dihydro-DB[c,p]C, while the major and minor phenols were identified as 11-hydroxy-DB[c,p]C and 12-hydroxy-DB[c,p]C, respectively. Further, the DNA adduction studies with the calf thymus DNA led to a mixture of dA and dG adducts for both fjord region diol epoxides (4 and 5). Interestingly, the dA to dG ratio for 1,2-dihydroxy-3,4-epoxide was much higher (3.2) compared to that of 11,12-dihydroxy-13,14-epoxide (0.5).     

Chloroformamidinium salts: Efficient reagents for preparation of 2‐aminobenzoimidazole, 2‐aminobenzoxazole,and 2‐aminobenzothiazole derivatives

A Reaction involving chloroformamidinium salts (TCFH 1a , BTCFH 1b , DmCFH 1c , DmPCFH 1d , BPCFH 1e ) and 2‐aminophenol 9a , benzene‐1,2‐diamine 9b , and 2‐aminothiophenol 9c afforded 2‐aminobenzoxazole 13 , 2‐aminobenzoimidazole 14 , and 2‐aminobenzothiazole 15 derivatives, respectively as major products, due to the in situ heterocyclization with dimethylamine acting as the better leaving group. Attempts for preparation of 13‐15 from the reaction of N,N‐dimethyl carbomyl chloride 16 with 2‐aminophenol 9a , benzene‐1,2‐diamine 9b , and 2‐aminothiophenol 9c were unsuccessful, and gave the unexpected products benzoxazol‐2‐ol 18a , benzoimidazol‐2‐one 18b , and S‐(2‐amino‐phenyl) N,N‐dimethylthiocarbamate 19 respectively. On the other hand reaction of chloroformamidinium salts 1a‐e with 3‐benzyl‐2‐hydrazinoquinoxaline 3 and 1‐hydrazinophthalazine hydrochloride 4 in the presence of triethylamine as a base, afforded the [1,2,4]triazolo derivatives 6 and 7 respectively in good yield and purity. These triazole derivatives were formed due to the strong tendency towards heterocyclization and substitution of dimethylamine group as a better leaving group.     

Stereoselective control in the Staudinger reactions involving monosubstituted ketenes with electron acceptor substituents: experimental investigation and theoretical rationalization

The stereoselectivity of the Staudinger reactions involving monosubstituted ketenes with electron acceptor substituents was investigated experimentally by determination of the product stereochemistry and theoretically via DFT calculations. The results indicate that imines preferentially attack the less sterically hindered exo-side of the ketenes to generate zwitterionic intermediates. Subsequently, for cyclic imines, the intermediates undergo a conrotatory ring closure directly to produce β-lactams, while for linear imines, the imine moiety of the intermediates isomerizes to more stable intermediates, which further undergo a conrotatory ring closure to afford trans-β-lactams. The steric hindrance and the isomerization, rather than the torquoelectronic effect, play crucial roles in controlling the stereoselectivity in the practical Staudinger reactions involving monosubstituted ketenes with electron acceptor substituents, although the unaccessible borylketene with a powerful electron acceptor group controls the stereoselectivity torquoelectronically, in theory.     

A theoretical study of Favorskii reaction stereochemistry. Lessons in torquoselectivity

The mechanisms of the chloroenolate-->cyclopropanone step of the "normal" Favorskii rearrangement have been investigated in detail using high-level ab initio calculations. A series of simple alpha-chloroenolates, based on chloroacetone (6), all monomethyl derivatives (7-9), a dimethyl analogue (10), and 1-acetyl-1-chlorocyclohexane (11) was first used to explore and define the basic features of the mechanism, which include the finding of both an "inversion" and a "retention" transition state and that in most cases these arise from separate ground-state conformations of the chloroenolate. These theoretical studies were then extended to an isomeric pair of chloroenolates 1 and 2, the cis- and trans-2-methyl derivatives of 11, which are the reactive intermediates involved in a well-known experimental study carried out by Stork and Borowitz (S-B). Finally, three alpha-chlorocyclohexanone enolate systems 12-14 were studied, since these intermediates have a more restricted enolate geometry. The "inversion" mechanism has been described as an SN2 process but the present results, while supporting a concerted process, is better described as an oxyallyl structure undergoing concerted ring closure. The "retention" mechanism has been described as SN1-like, but the calculations show that this process is also concerted, although much less so, and again involves oxyallyl-like transition-states. The model systems 6-8, 10, and 11 with a potential plane of symmetry have two enantiomeric transition states for inversion and another two for retention of configuration (at the C-Cl center). With 9 and the S-B models 1 and 2, with no symmetry plane, there are a calculated total of four diastereomeric transition states for cyclopropanone ring closure in each case, two for inversion and two for retention. While the transition-state energies calculated for simple chloroenolates favor the inversion process, the S-B models 1 and 2 have almost equal inversion-retention transition-state energies. Solvation simulation calculations of ground states and transition states suggest that the retention mechanism becomes relatively more favored in polar solvents, in agreement with some experimental results. In the chloroenolates 12-14, both inversion and retention mechanisms were also located, these arising from two different ground-state ring conformations of the enolate. In these models, one also finds similar inversion and retention transition-state energies, but again with a small preference for the inversion process.     

Syntheses of 3-substituted 2,3-dihydrobenzofuranes, 1,2-dihydronaphtho(2,1-b)furanes,and 2,3-dihydro-1H-indoles by tandem ring closure-S(RN)1 reactions

3-Substituted 2,3-dihydrobenzofuranes (7a-c), 1,2-dihydronaphtho(2,1-b)furanes (10a-c), and N-substituted 2,3-dihydro-1H-indoles (8a-c, 9a,b) are obtained in very good yields by S(RN)1 photostimulated reactions in liquid ammonia from adequate haloaromatic compounds ortho-substituted with a suitable double bond (3a,b; 4a,b; 5a; 6a,b) and Me3Sn-, Ph2P-, and -CH2NO2 anions. The novelty of the work involves the versatile application of a 5-exo ring closure process during the propagation cycle of the S(RN)1 reaction; the alkyl radical intermediates formed react with the nucleophiles to afford the ring closure-substituted heterocycles. The factors governing the observed product distribution are discussed.     

FT-IR and FT-raman spectroscopy study of the cyclic anhydride intermediates for the esterification of cellulose: III. Cyclic anhydrides formed by the isomers of cyclohexanedicarboxylic acid

Multifunctional carboxylic acids have been used as crosslinking agents for cotton and wood pulp cellulose. In our previous research, we found that a polycarboxylic acid esterifies cellulose through the formation of a 5-membered cyclic anhydride intermediate by the dehydration of two carboxyl groups. In this research, we studied the formation of cyclic anhydride intermediates by different isomers of cyclohexanedicarboxylic acid (CHA) so that we can elucidate the effects of molecular structure on the formation of the anhydride intermediates. We found that both cis-and trans-1,2-CHA form 5-membered anhydride intermediates when temperature reaches their melting points and that cis-1,2-CHA forms the cyclic anhydride at temperatures lower than does trans-1,2-CHA. 1,3-CHA forms 6-membered cyclic anhydride at temperatures much higher than its melting point. The formation of a 5-membered cyclic anhydride intermediates takes place at temperatures lower than that of a 6-membered anhydride. This is probably the main reason why those polycarboxylic acids with their carboxylic acid groups bonded to the adjacent carbons of the molecular backbones are more effective crosslinking agents for cellulose than those with their carboxylic groups bonded to the alternative carbons. No formation of cyclic anhydride was found for 1,4-CHA. The formation of a five-membered cyclic anhydride was accelerated by monosodium phosphate, which is used as a catalyst for the esterification of cotton cellulose by polycarboxylic acids.     

Reactions of 9-substituted guanines with bromomalondialdehyde in aqueous solution predominantly yield glyoxal-derived adducts

Reactions of 9-ethylguanine, 2'-deoxyguanosine and guanosine with bromomalondialdehyde in aqueous buffers over a wide pH-range were studied. The main products were isolated and characterized by (1)H and (13)C NMR and mass spectroscopy. The final products formed under acidic and basic conditions were different, but they shared the common feature of being derived from glyoxal. Among the 1 : 1 adducts, 1,N(2)-(trans-1,2-dihydroxyethano)guanine adduct (6) predominated at pH < 6 and N(2)-carboxymethylguanine adduct (10a,b) at pH > 7. In addition to these, an N(2)-(4,5-dihydroxy-1,3-dioxolan-2-yl)methylene adduct (11a,b) and an N(2)-carboxymethyl-1,N(2)-(trans-1,2-dihydroxyethano)guanine adduct (12) were obtained at pH 10. The results of kinetic experiments suggest that bromomalondialdehyde is significantly decomposed to formic acid and glycolaldehyde under the conditions required to obtain guanine adducts. Glycolaldehyde is oxidized to glyoxal, which then modifies the guanine base more readily than bromomalondialdehyde. Besides the glyoxal-derived adducts, 1,N(2)-ethenoguanine (5a-c) and N(2),3-ethenoguanine adducts (4a-c) were formed as minor products, and a transient accumulation of two unstable intermediates, tentatively identified as 1,N(2)-(1,2,2,3-tetrahydroxypropano)(8) and 1,N(2)-(2-formyl-1,2,3-trihydroxypropano)(9) adducts, was observed.     

Zur Lenkung der intramolekularen Diels-Alder-Reaktion von Cyclopentadienen mit olefinischen Substituenten

On the Course of the Intramolecular Diels-Alder-Reaction of Cyclopentadienes with Olefinic Substituents The 1:3 mixture of 4-bromobicyclo [3.2.0]hept-2-en-6-one and -7-one ( 1/2 ), available by N-bromosuccinimide bromination of bicyclo [3.2.0]hept-2-en-6-one, reacted rapidly with the organo-magnesium and -zinc reagents 3, 10a, 10b and 10d by cyclobutanone ring opening and bromide ion expulsion to give the 5-substituted cyclopentadienes 5, 12a, 12b/12c , and 12d as non-isolated intermediates. Further transformation occured in situ either by a direct intramolecular Diels-Alder reaction (path a) or by a [1,5]-H-migration prior to the intramolecular Diels-Alder reaction (path b). The intermediate 5 followed only path a to give the bridged norbornene derivative 7 , the intermediates 12a, 12b and 12c followed only path b to give the annellated norbornene derivatives 15a, 15b and 15c , respectively, and the intermediate 12d followed both paths to give the bridged 14d and the annellated norbornene derivative 15d (in the ration of about 1.4:1). These observations are discussed in terms of the relative velocities of [1,5]-H-migrations and intramolecular Diels-Alder reactions. The major conclusions are: (1) bridged norbornene derivatives with a six-membered ring C (such as 14d ) can be prepared by an intramolecular Diels-Alder reaction from 5-alkenyl-cyclopentadienes 12 , as long as the dienophilic double bond is activated by an appropriate substituent (as in 12d ); (2) such 5-alkenyl-cyclopentadienes 12 are available from the reaction of the bromo-bicyclo-heptenones 1/2 with suitable C-nucleophiles 10 .     

Synthesis and autoxidation of new tetracyclic 9H,10H-indolizino[1,2-b]indole-1-ones.

The new tetracyclic 9H,10H-indolizino[1,2-b]indole-1-one derivatives (7a-d, 7ea, 7eb) have been synthesized by modified Fischer indole synthesis from the enol ether of 2,5-dihydroxy-7-methyl-6-cyano-indolizine (3) and arylhydrazines (4a-g). Attempted N-methylation of 7a-d produced a series of autoxidized products including 10-hydroperoxy-1-methoxyindolizino[1,2-b]indole (9a-d) as the major product accompanied with methylperoxides (10a-d and 11a-d) and 2-formyl-3-(pyridine-2-yl)indole (12a, 12c) derivatives as the minor products. A plausible mechanism of the autoxidation is postulated based on the isolation of some intermediates. The reaction is thought to proceed through azaenolate/enamine intermediates following a novel type of autoxidation.     

Frustrated Lewis pair addition to conjugated diynes: formation of zwitterionic 1,2,3-butatriene derivatives

The frustrated Lewis pair B(C(6)F(5))(3)/P(o-tolyl)(3) (4a) reacts with 4,6-decadiyne to give the trans-1,2-addition product 5. In contrast, the B(C(6)F(5))(3)/P(t)Bu(3) FLP (4b) reacts with this substrate to give the trans-1,4-adduct trans-6. The cumulene trans-6 undergoes trans-/cis-isomerization upon photolysis to give a ca. 1:1 trans-6/cis-6 mixture. The FLP 4b reacts with 2,6-hexadiyne at r.t. to yield a ca. 4:1 mixture of their trans-1,2- and trans-1,4-addition products (7,8). DFT calculations showed that the zwitterionic 1,4-addition products are favored under thermodynamic control. Thermolysis of the kinetic trans-1,2-addition product (7) (80 °C, bromobenzene) does not lead to the thermodynamically favored 1,4-isomer (8), but instead elimination of isobutylene occurs to the formal trans-1,2-adduct (9) of the B(C(6)F(5))(3)/PH(t)Bu(2) pair. Compounds 5, 6, 7, 8, 9 were analyzed by X-ray diffraction.     

Sequential formation of yellow, red, and orange 1-phenyl-3,3-biphenylene-allene dimers prior to blue tetracene formation: Helicity reversal in trans-3,4-diphenyl-1,2-bis(fluorenylidene)cyclobutane

1-Phenyl-3,3-biphenyleneallene (2), the base-catalyzed rearrangement product of 9-phenylethynylfluorene (1) yields a yellow, head-to-tail dimer 6 that, upon gentle warming, is converted to the red tail-to-tail isomer trans-3,4-diphenyl-1,2-bis(fluorenylidene)cyclobutane (7), in which the two fluorenylidene moieties severely overlap. The helical sense of the fluorenylidene moieties in 7 matches that of the phenyl substituents, and the interplanar angle between the fluorenylidene moieties is 41 degrees . At 80 degrees C, 6 isomerizes to orange cis-3,4-diphenyl-1,2-bis(fluorenylidene)cyclobutane (8), which at 110 degrees C is converted to orange trans diastereomer 9, whereby the helicity of the overlapping fluorenylidene moieties is reversed from that in 7 such that they are aligned with the ring hydrogen atoms, and the interplanar angle between the fluorenylidene moieties is now 60 degrees . At 180 degrees C, 6 rearranges to dispirodihydrotetracene 3 and blue, electroluminescent diindenotetracene 4, which is readily oxidized to peroxide 5. In the solid state, both 3 and 4 adopt structures with Ci symmetry (only an inversion center) such that the central polycyclic framework is nonplanar. Deprotonation of yellow head-to-tail allene dimer 6 with tBuOK in DMSO and reprotonation with HOAc yields the [1,3]-hydrogen migration product 10, in which the proton originally on the cyclobutane ring is now sited at C9 on the exocyclic fluorenyl substituent. Analogously, deprotonation and reprotonation of orange dimer 9 furnishes [1,3]-hydrogen migration product 11. Side product 17, formed during the synthesis of 1 from 9-phenylethynylfluoren-9-ol, BF3 and Et3SiH, was shown to be a silyl-indene spiro-linked to C9 of fluorene. All products were characterized by NMR spectroscopy and X-ray crystallography, and the mechanisms of these interconversions are discussed.     

Alkoxide-induced reactions of N-substituted saccharins. Synthesis of 1,2-benzothiazocine 1,1-dioxide and 2,3-dihydropyrrolo[1,2-b]-[1,2]benzisothiazole 5,5-dioxide derivatives

The reactions of saccharin derivatives 1 with sodium alkoxides were studied. Under mild conditions, compounds 1a-f gave the corresponding open sulfonamides 5a-f . Under drastic conditions, β-(saccharin-2)propionic acid derivatives 1a,b reacted with sodium ethoxide affording saccharin and β-ethoxypropionic acid derivatives 4a,b . γ-(Saccharin-2)butyric acid derivatives 1c,d and γ-(saccharin-2)-butyrophenone 1f reacted with sodium t-butoxide in dimethyl sulfoxide affording 5-substituted 6-hydroxy-3,4-dihydro-2H-1,2-benzothiazocine 1,1-dioxides 9 . From mother liquors, 1-substituted 2,3-dihydro-pyrrolo[1,2-b][1,2]benzisothiazole 5,5-dioxides 10 were isolated several hours later, though not detected immediately after completing the reaction. When the reactions were carried out in t-butyl alcohol, the yields of 9 diminished and those of 10 increased with product ratio inversion. Different experimental observations on the possible pathway generating 9 and 10 are discussed.     

Cyclopropyl alkynes as mechanistic probes to distinguish between vinyl radical and ionic intermediates

[reaction: see text] The reactions of (trans-2-phenylcyclopropyl)ethyne, 1a, (trans,trans-2-methoxy-3-phenylcyclopropyl)ethyne, 1b, and (trans,trans-2-methoxy-1-methyl-3-phenylcyclopropyl)ethyne, 1c, with either aqueous sulfuric acid or tris(trimethylsilyl)silane (or tributyltin hydride) and AIBN have been investigated. Protonation and addition of the silyl (or stannyl) radical occurred at the terminal position of the alkyne giving an alpha-cyclopropyl-substituted vinyl cation or radical, respectively. Under both reaction conditions, 1a yielded products derived from ring opening toward the phenyl substituent. Alkynes 1b and 1c, however, gave different products depending on whether radical or cationic conditions were used. When radical conditions were employed, products derived from regioselective ring opening toward the phenyl substituent were obtained. In contrast, when cationic conditions were employed, products derived from selective ring opening toward the methoxy substituent were isolated. The corresponding alpha-cyclopropyl-substituted vinyllithium derivatives were also synthesized and were found to be stable toward rearrangement. An estimate of the rate constants for ring opening of the alpha-cyclopropylvinyl cations was also made: values of 10(10)-10(12) s(-1) were found for the vinyl cations derived from protonation of the terminal carbon of alkynes 1a-c. Based on these results, cyclopropyl alkynes 1a-c can be classified as hypersensitive mechanistic probes for the detection of vinyl radical or cationic intermediates generated adjacent to the cyclopropyl ring and, in the case of 1b and 1c, the distinction between a radical or cationic intermediate is possible.     

Cyclic allenes or diradicals in the cyclization reactions of dienynes generated by photolysis of alkynylcyclohexadienones

Reported here are some rearrangements involving the electrocyclic ring closure of dieneynes 7. Such ring closures are envisaged to possibly give strained substituted cyclic allenes 8 which could also behave as diradicals 8a. The results show that compounds such as 5 rearrange to cyclohexadienones 9a, 9b, or 11 through these kind of intermediates. Theoretical calculations performed on simple models similar to the intermediates suggest that the nature of these intermediates correspond to that of cyclic allenes.     

Intrinsic gas-phase electrophilic reactivity of cyclic N-alkyl- and N-acyliminium ions

The intrinsic gas-phase reactivity of cyclic N-alkyl- and N-acyliminium ions toward addition of allyltrimethylsilane (ATMS) has been compared using MS(2) and MS(3) pentaquadrupole mass spectrometric experiments. An order of electrophilic reactivity has been derived and found to agree with orders of overall reactivity in solution. The prototype five-membered ring N-alkyliminium ion 1a and its N-CH(3) analogue 1b, as well as their six-membered ring analogues 1c and 1d, lack N-acyl activation and they are, accordingly, inert toward ATMS addition. The five- and six-membered ring N-acyliminium ions with N-COCH(3) exocycclic groups, 3a and 3b, respectively, are also not very reactive. The N-acyliminium ions 2a and 2c, with s-trans locked endocyclic N-carbonyl groups, are the most reactive followed closely by 3c and 3d with exocyclic (and unlocked) N-CO(2)CH(3) groups. The five-membered ring N-acyliminium ions are more reactive than their six-membered ring analogues, that is: 2a > 2c and 3c > 3d. In contrast with the high reactivity of 2a, its N-CH(3) analogue 2b is inert toward ATMS addition. For the first time, the transient intermediates of a Mannich-type condensation reaction were isolated-the beta-silyl cations formed by ATMS addition to N-acyliminium ions-and their intrinsic gas-phase behavior toward dissociation and reaction with a nucleophile investigated. When collisionally activated, the beta-silyl cations dissociate preferentially by Grob fragmentation, that is, by retro-addition. With pyridine, they react competitively and to variable extents by proton transfer and by trimethylsilylium ion abstraction-the final and key step postulated for alpha-amidoalkylation. Becke3LYP/6-311G(d,p) reaction energetics, charge densities on the electrophilic C-2 site, and AM1 LUMO energies have been used to rationalize the order of intrinsic gas-phase electrophilic reactivity of cyclic iminium and N-acyliminium ions.