Characterization of surface properties of a solid plate using nonlinear Lamb wave approach

A nonlinear Lamb wave approach is presented for characterizing the surface properties of a solid plate. This characterization approach is useful for some practical situations where ultrasonic transducers cannot touch the surfaces to be inspected, e.g. the inside surfaces of sealed vessels. In this paper, the influences of changes in the surface properties of a solid plate on the effect of second-harmonic generation by Lamb wave propagation were analyzed. A surface coating with the different properties was used to simulate changes in the surface properties of a solid plate. When the areas and thicknesses of coatings on the surface of a given solid plate changed, the amplitude-frequency curves both of the fundamental waves and the second harmonics by Lamb wave propagation were measured under the condition that Lamb waves had a strong nonlinearity. It was found that changes in the surface properties might clearly affect the efficiency of second-harmonic generation by Lamb wave propagation. The Stress Wave Factors (SWFs) in acousto-ultrasonic technique were used for reference, and the definitions of the SWFs of Lamb waves were introduced. The preliminary experimental results showed that the second-harmonic SWF of Lamb wave propagation could effectively be used to characterize changes in the surface properties of the given solid plate.     

Measurement of elastic nonlinearity using remote laser ultrasonics and CHeap Optical Transducers and dual frequency surface acoustic waves

A nonlinear ultrasonic technique for evaluating material elastic nonlinearity has been developed. It measures the phase modulation of a high frequency (82MHz) surface acoustic wave interacting with a low frequency (1MHz) high amplitude stress inducing surface acoustic wave. A new breed of optical transducers has been developed and used for the generation and detection of the high frequency wave. The CHeap Optical Transducer (CHOT) is an ultrasonic transducer system, optically activated and read by a laser. We show that CHOTs offer advantages over alternative transducers. CHOTs and nonlinear ultrasonics have great potential for aerospace applications. Results measuring changes in ultrasonic velocity corresponding to different stress states of the sample are presented on fused silica and aluminium.     

Investigation of the linear and nonlinear properties of a Drude model photonic crystal

The optical transmission properties of a one-dimensional Drude model photonic crystal are investigated. The linear wave propagation is studied by the transfer matrix method. Using a delta-function approximation a nonlinear 2-d map is obtained and used to explore the global transmission properties of nonlinear wave propagation in this system. Inclusion of a frequency-dependent refractive index represented by the Drude model results in a considerable modification of the characteristics of the linear and nonlinear wave propagation of the one-dimensional photonic crystal.     

A model for the propagation of nonlinear dispersive strain waves in a solid with defect clusters

A model for the propagation of nonlinear dispersive one-dimensional longitudinal strain waves in an isotropic solid with quadratic nonlinearity of elastic continuum is developed with taking into account the interaction with atomic defect clusters. The governing nonlinear dispersive-dissipative equation describing the evolution of longitudinal strain waves is derived. An approximate solution of the model equation was derived which describes asymmetrical distortion of geometry of the solitary strain wave due to the interaction between the strain field and the field of clusters. The contributions of the finiteness of the relaxation times of cluster-induced atomic defects to the linear elastic modulus and the lattice dissipation and dispersion parameters are determined. The amplitudes and width of the nonlinear waves depend on the elastic constants and on the properties of the defect subsystem (atomic defects, clusters) in the medium. The explicit expression is received for the sound velocity dependence upon the fractional cluster volume, which is in good agreement with experiment. The critical value of cluster volume fraction for the influence on the strain wave propagation is determined.     

一维非线性声波传播特性

针对一维非线性声波的传播问题进行了有限元仿真和实验研究. 首先推导了一维非线性声波方程的有限元形式, 含有高阶矩阵的非线性项导致声波具有波形畸变、谐波滋生、基频信号能量向高次谐波传递等非线性特性. 编制有限元程序对一维非线性声波进行了计算并对仿真得到的畸变非线性声波信号进行处理, 分析其传播性质和物理意义. 为验证有限元计算结果, 开展了水中的非线性声波传播的实验研究, 得到了不同输入信号幅度激励下和不同传播距离的畸变非线性声波信号. 然后对基波和二次谐波的传播性质进行详细讨论, 分析了二次谐波幅度与传播距离和输入信号幅度的变化关系及其意义, 拟合出二次谐波幅度随传播距离变化的方程并阐述了拟合方程的物理意义. 结果表明, 数值仿真信号及其频谱均与实验结果有较好的一致性, 证实计算方法和结果的正确性, 并提出了具有一定物理意义的二次谐波随传播距离变化的简单数学关系. 最后还对固体中的非线性声波传播性质进行了初步探讨. 本研究工作可为流体介质中的非线性声传播问题提供理论和实验依据.     

Non-linear effects of high-power ultrasonics in crystalline solids

The aspects of non-linear elastic wave propagation in real crystalline solids pertinent to the field of high-power ultrasonics are presented. Particular emphasis is placed on the role non-linear elastic wave propagation may play in the ultrasonic softening process called the ‘Blaha effect’.     

Measurement of material nonlinearity using surface acoustic wave parametric interaction and laser ultrasonics

A dual frequency mixing technique has been developed for measuring velocity changes caused by material nonlinearity. The technique is based on the parametric interaction between two surface acoustic waves (SAWs): The low frequency pump SAW generated by a transducer and the high frequency probe SAW generated and detected using laser ultrasonics. The pump SAW stresses the material under the probe SAW. The stress (typically <5 MPa) is controlled by varying the timing between the pump and probe waves. The nonlinear interaction is measured as a phase modulation of the probe SAW and equated to a velocity change. The velocity-stress relationship is used as a measure of material nonlinearity. Experiments were conducted to observe the pump-probe interaction by changing the pump frequency and compare the nonlinear response of aluminum and fused silica. Experiments showed these two materials had opposite nonlinear responses, consistent with previously published data. The technique could be applied to life-time predictions of engineered components by measuring changes in nonlinear response caused by fatigue.     

非线性内波存在下的浅海远程混响模型

研究了浅海非线性内波对远程混响场的影响。通过分析非线性内波活动引起声源到海底散射元以及散射元到接收点之间的声传播变化,给出了非线性内波引起远程混响强度变化的表示,建立了非线性内波存在下的浅海远程混响模型,数值计算了非线性内波运动引起远程混响强度的变化。理论和数值计算表明,非线性内波的活动能够引起远程混响强度的变化,在某些情况下会导致远程混响强度增强。通过讨论非线性内波引声简正波的耦合效应,给出了其引起远程混响强度增强的原因。     

Propagation of the ultrashort laser pulses through the quantum nonlinear medium with resonant properties

The propagation of ultrashort few-cycle laser pulses through a quantum nonlinear medium with resonant properties is studied using the method of slowly varying amplitudes with allowance for dispersion effects. A self-consistent system of nonlinear wave equation for the evolution of laser field and the nonstationary Schrödinger equation that determines the material polarization response is numerically solved. Specific features of the propagation of laser pulse caused by a relatively large spectral width and the nonadiabatic character of the laser pulse are established. The rise of the slowly dumping polarization at the eigenfrequency of the medium and the consequent stretching of the laser pulse are observed. The role of the resonant absorption of the laser energy in the medium is analyzed. The nonlinear spectral broadening is demonstrated for the laser pulse propagating through the medium.     

Solitary Surface Waves in Plasmas Interacting with a High-Frequency Electric Field

We show that a solitary surface wave can exist at the boundary between a plasma and a dielectric, due to a balance between the nonlinear surface charge terms and the dispersive terms which here are caused by the presence of a high-frequency incident electromagnetic wave. The solitary wave propagation velocity, which depends on the intensity of the incident field, is also calculated.     

Nonlinear surface waves propagating along a boundary of magnetoactive plasma and vacuum

Dispersion relation is obtained for a nonlinear unpolarized surface wave propagating along a boundary between vacuum and a magnetoactive plasma in a geometry when a dc-magnetic field is parallel to both the boundary and the propagation of the surface wave. A general approach used is based on the knowledge of the corresponding first integral of Maxwell's equations.     

Detection of fatigue-induced micro-cracks in a pipe by using time-reversed nonlinear guided waves: a three-dimensional model study

Localization of fatigue-related micro-cracks in pipelines is of increasing importance in industrial applications. A three-dimensional (3D) fatigue-crack imaging technique combining nonlinear guided waves with time reversal is proposed in this paper for potential applications in pipeline inspections. By using this method, the non-classical nonlinear guided waves generated from micro-cracks with hysteretic behavior are recorded, and the third harmonic waves are used to reconstruct the fatigue-crack images in a pipe by using a time reversal (TR) process. The feasibility of this method is examined by the imaging simulations for a steel pipe with varied defect areas. A finite-difference time-domain (FDTD) code is programmed to solve the wave equations under cylindrical coordinates, and simulate the experimental process of wave propagation. The results show that: (1) the proposed technique has excellent spatial retrofocusing capability; (2) the accuracy of defect localization and sizing depends on the crack orientation and the adopted guided wave mode; and (3) different displacement/stress components have varied sensitivities to the crack orientation.     

Field distribution of a light wave near a magnetic defect in one-dimensional photonic crystals

The field distribution of a light wave near a magnetic defect in a one-dimensional photonic crystal is analyzed. It is shown that, by properly varying the magnetic defect thickness or the parameters of the photonic crystal surrounding the defect, one can create a situation where the electric field of a light wave will be localized predominantly inside the magnetic layer or, conversely, in the immediate vicinity of the layer surface. This opens up possibilities for optimizing the Q factor of a magnetic microcavity in the presence of dissipation in the magnetic layer and, hence, for enhancing the linear and nonlinear magneto-optical effects. The possibility of separating the contributions from the surface and volume of the magnetic material to the nonlinear magnetooptical properties by properly varying the field distribution over the defect thickness is discussed.     

激光超声检测带过渡圆角平板表面缺陷的数值研究

为了研究激光激发出的超声波在带过渡圆角的金属平板上的传播规律和检测表面缺陷的方法,采用有限元法模拟了该类平板中的激光超声现象,分析了表面波在圆角区域的传播规律和与表面缺陷的作用过程。数值结果表明:激光激发出纵波、横波和Rayleigh波等,其中Rayleigh波主要存在于表面mm量级,并且在过渡圆角处发生模式转换生成了直达波R′和模式转换波R_R等多种表面波;经过过渡区域后的声波在表面缺陷处发生了反射和透射现象,通过B扫图可以检测缺陷的位置。随着缺陷深度的增加,表面波的透射系数不断减小,且透射波R_t和R_st存在0.5 μs左右的到达时间差,该时间差与缺陷深度近似成线性正相关。数值结果为激光超声检测带过渡圆角的平板表面缺陷提供了有价值的参考。     

Acoustic field excited by a pulsed laser line source in a cylinder

The excitation and propagation of the acoustic waves in an elastic cylinder are studied by laser ultrasonics both theoretically and experimentally. The theoretical analysis of the two-dimensional acoustic field excited by a pulsed laser line source impacting on the generatrix of an elastic cylinder is presented. The dispersive properties for both cylindrical Rayleigh wave and the higher modes--whispering gallery (WG) modes are analyzed in detail. The numerical transient displacement waveforms for a detecting point located another terminal of the cylinder diameter opposite the source are calculated. The experimental excitation and detection of the acoustic waves in an aluminum cylinder are carried out on a laser ultrasonic system, which mainly consists of a Q-switched Nd:YAG laser and a laser interferometer. The wave components of bulk waves and surface waves (cylindrical Rayleigh waves and WG modes) are analyzed by comparing the numerical and experimental waveforms. The results are in good agreement.     

Analytical solution for nonlinear wave propagation in shallow media using the variational iteration method

An analytical solution is presented for nonlinear surface wave propagation. A variational iteration method (VIM) was employed and time-dependent profiles of the surface elevation level and velocity obtained analytically for different initial conditions. It is shown that the VIM used here is a flexible and accurate approach and that it can rapidly converge to the same results obtained by the Adomian decomposition method.     

次声波在非均匀运动大气中非线性传播特性的研究

基于有限时域差分方法将大气中近似到二阶的非线性波动方程进行离散化,得到了数值模拟所采用的差分方程. 在此基础上,对线阵列辐射的脉冲声波在非均匀运动大气中的垂直和斜向传播进行了二维数值模拟,模拟了武汉地区(114:20°E, 30:37°N)在夏季和冬季UT=29000 s时开始传播的脉冲声波在不同时刻的声压分布. 模拟时通过采用Msise00和HWM93 两个大气模型,考虑了由于大气温度和密度变化以及大气风场存在所引起的大气不均匀性和运动性. 通过研究上述两季有风与无风条件下的声压差值p_r,可以发现:风场对次声波在传播中声压分布的影响较大;由于不同季节和不同传播距离上"有效声速"的不同,导致了两季p_r分布波形存在差异;风场对声波非线性传播的影响要远大于其对线性传播的影响. 关键词： 次声波传播 非均匀运动大气 有效声速     

次声波在非均匀大气中的超视距传播特性研究

本文基于Nonlinear Progressive Equation (NPE方程)开展了对非均匀大气中次声波超视距传播特性的研究, 通过数值模拟实验对武汉上空四季次声波传播情况以及路径传输损耗进行了模拟, 获取了次声波在非均匀大气中的超视距传播特性. 计算结果表明, 非均匀大气的性质及其中存在的风对次声波传播有明显的影响, 平流层折射与风速和声波传播方向密切相关, 数值模拟结果表明, 当高斯声源主频为0.1 Hz时, 在不同的背景风场传播条件下, 存在着两个反射高度, 其中40 km 高度反射传输损耗约为25 dB, 110 km反射传输损耗约为50 dB. 关键词： 次声波 超视距传播 非均匀大气 平流层折射     

Numerical modelling of acoustic pressure fields to optimize the ultrasonic cleaning technique for cylinders

Fouling build up is a well-known problem in the offshore industry. Accumulation of fouling occurs in different structures, e.g. offshore pipes, ship hulls, floating production platforms. The type of fouling that accumulates is dependent on environmental conditions surrounding the structure itself. Current methods deployed for fouling removal span across hydraulic, chemical and manual, all sharing the common disadvantage of necessitating halting production for the cleaning process to commence. Conventionally, ultrasound is used in ultrasonic baths to clean a submerged component by the generation and implosion of cavitation bubbles on the fouled surface; this method is particularly used in Reverse Osmosis applications. However, this requires the submersion of the fouled structure and thus may require a halt to production. Large fouled structures such as pipelines may not be accommodated. The application of high power ultrasonics is proposed in this work as a means to remove fouling on a structure whilst in operation. The work presented in this paper consists of the development of a finite element analysis model based on successful cleaning results from a pipe fouled with calcite on the inner pipe wall. A Polytec 3D Laser Doppler Vibrometer was used in this investigation to study the fouling removal process. Results show the potential of high power ultrasonics for fouling removal in pipe structures from the wave propagation across the structure under excitation, and are used to validate a COMSOL model to determine cleaning patterns based on pressure and displacement distributions for future transducer array design and optimization.     

Nonlinear surface acoustic waves: realization of solitary pulses and fracture

A laser-based technique for the contact-free generation and detection of strongly nonlinear surface acoustic wave (SAW) pulses with amplitudes limited by the materials strength has been developed. The effects of nonlinear propagation of short elastic surface pulses with finite strength in isotropic solids, such as fused quartz, anisotropic solids, such as silicon, and dispersive media were investigated. Solitary surface wave propagation was observed in layered structures for normal and anomalous dispersion. In addition, a SAW-based method for evaluating the critical fracture stress of anisotropic brittle solids, such as single crystal silicon, is introduced.