苯甲酸乙烯酯与受电子的可逆加成－断链链转移共聚合

采用二硫代苯甲酸苄酯和偶氮二异丁腈组成的引发体系，以可逆加成－断链链 转移聚合方法合成了苯甲酸乙烯酯与马来酸酐及N－取代马来酰亚胺的交替共聚物 。结果表明，所行聚合物具有预期分子量，分子量分布在1.1～1.3之间。在较低转 化率下所得的聚合物均为交替结构，而与摩尔设料比无关。     

马来酸酐与乙酸乙烯酯交替共聚合反应的研究

本文研究了马来酸酐（MAn）在过氧化苯甲酰（BP）引发作用下与醋酸乙烯酯（VAc）的交替共聚反应。红外光谱证明了交替共聚物的结构，分析结果表明共聚物是由反应单体技1：1摩尔比例组成。当c（BPO）＝6．8×10~（－3）moi／L，c（VAc）＝3．4×10~（－3）mol／L，p（MAn）＝32．7g／L，63～65℃反应18小时，转化率可达92％以上。     

苯乙烯与N-取代马来酰亚胺的可逆加成-断裂链转移交替共聚合

研究了二硫代苯甲酸酯存在下偶氮二异丁腈引发苯乙烯(St)、St与N-对羟基苯基马来酰亚胺(HPM)、St与N-对(2-氯/溴丙酰氧基)苯基马来酰亚胺(CPPM/BPPM)的可逆加成-断裂链转移(RAFT)均/共聚,聚合物的结构由紫外-可见光(UV-Vis)与凝胶渗透色谱(GPC)表征.结果表明,St的RAFT均聚以及St与N-取代马来酰亚胺的RAFT共聚均呈现活性聚合特征,分子量随着转化率上升而增加,且分子量分布较窄.对于St的RAFT均聚,由于双基终止,聚苯乙烯(PSt)链中戴帽效率随着转化率上升逐渐下降.对于St与N-取代马来酰亚胺的RAFT共聚合,电荷转移复合物的形成显著地提高了共聚反应速度,并促进交替结构的形成.随后进行了以P(St-alt-BPPM)引发St的原子转移自由基聚合以制备梳型PSt,结果表明在强极性溶剂中进行的聚合过程失去可控性,所得产物分子量极宽,而在本体聚合中所得聚合物分子量相对较窄,有一定的可控性.     

Nd（naph）_3－Al（i－Bu）_3催化马来酸酐和环氧丙烷交替共聚合

研究了马来酸酐和环氧丙烷的交替共聚，发现Ｎｄ（ｎａｐｈ）＿３－Ａｌ（ｉ－Ｂｕ）＿３是马来酸酐（ＭＡｎ）和环氧丙烷（ＰＯ）交替共聚的良好催化剂．用红外光谱、核磁共振研究了共聚物的结构．共聚反应动力学研究表明共聚反应与单体和催化剂浓度均呈一级关系．表观活化能为１１３ｋＪ／ｍｏｌ．     

单体组成对甲基丙烯酸甲酯/丙烯酸丁酯RAFT共聚合转移常数的影响

采用Z基团为—CH2C6H5的RAFT试剂为链转移剂,AIBN为引发剂,60℃下进行甲基丙烯酸甲酯/丙烯酸丁酯(MMA/BA)的本体RAFT共聚合,并用GPC法测算不同单体组成下低聚物RAFT的链转移常数(Ctr).实验表明,对BA的均聚合,Ctr高达116,但对MMA的均聚合,Ctr约为0.1.在共聚体系中,Ctr与fMMA之间为非线性关系,随着fMMA的增加呈下降趋势.Ctr随单体组成的变化规律可以很好地解释不同单体组成下RAFT共聚合中分子量及其分布随转化率变化的规律.     

以聚丙二醇二苯甲酸酯为给电子体的丙烯聚合催化剂

 采用聚丙二醇二苯甲酸酯(PPGDB)为内给电子体制备了一种新的丙烯聚合催化剂MgCl2/PPGDB/TiCl4. 该催化剂用于丙烯聚合时,除了具有与以邻苯二甲酸二异丁酯为给电子体的催化剂相当的活性和立体定向性外,其特点在于所得产物的分子量分布较宽(Mw/Mn＞8.0). 采用红外光谱研究了催化剂中PPGDB与MgCl2的作用机制,结果表明PPGDB中的酯官能团和醚官能团可同时与MgCl2配位. 这种双官能团的配位作用是所得聚合物分子量分布较宽的主要原因.     

马来酸酐和苯乙烯的可逆加成-断链链转移聚合及新型嵌段共聚物的合成

马来酸酐和苯乙烯是被广为研究的一对电荷转移复合物 (Ｃｈａｒｇｅｔｒａｎｓｆｅｒｃｏｍｐｌｅｘ,简称ＣＴＣ) ,而且能通过通常的自由基聚合发生交替共聚[1] .所得的聚合物由于酸酐基团的存在 ,很易进行大分子改性得到具有某些特殊功能的高分子 .不过 ,所得共聚物的分子量难以控制且分子量分布也较宽 .近年来发展起来的“活性” 可控自由基聚合越来越为人们所关注 ,因为采用这种方法不仅可对聚合物的分子量进行设计 ,同时分子量分布也较窄 ,也不需要活性离子型聚合那样严格的聚合条件 .关于烯类单体的活性自由基聚合迄今主要有氮氧自由基…     

4－N－茄呢基氨基苯甲酸糖酯的合成

在氢氧化钠和四丁基溴化铵存在下，将化合物4－N－茄呢基氨基苯甲酸（3） 分别与O－乙酰基溴代葡萄糖、O－乙酰基溴代半乳糖、O－乙酰基溴代乳糖和O－乙 酰基溴代麦牙糖反应制得对应的糖酯4a-4d，由元素分析，IR，~1H NMR，~(13)C NMR和MS确证了四个新化合物的结构，并做了几种抗癌生理活性测试。     

Nd（P_（507））_3－Al（i－Bu）_3催化马来酸酐与环氧丙烷开环交替共聚

本文研究了马来酸酐和环氧丙烷交替共聚，发现Ｎｄ（Ｐ_（５０７））_３－Ａｌ（ｉ－Ｂｕ）_３是马来酸酐（ＭＡｎ）和环氧丙烷（ＰＯ）交替共聚的良好催化剂，并用红外光谱，核磁共振谱研究了共聚物的结构。     

丙烯酸β-羟丙酯与苯乙烯共聚合的研究

<正> 丙烯酸β-羟丙酯(HPA) 是一种具有多种反应功能的丙烯酸酯类单体,由它制得的大分子同时带有羰基、酯基和羟基,因而可用它制备特定功能的大分子如耐火树脂、涂料、油田助剂及水处理剂等,国内外对HPA的共聚合活性报道很少,CHOW曾研究过HPA与苯乙烯(St)的共聚合,并用Mayo-Lewis方程法计算出它们的竞聚率。本文研究了HPA与St在甲苯溶液中的自由基共聚合,用Mayo-Lewis方程法、FR法、YBR法及K-T法四种方法分别计算出St-HPA共聚合出竞聚率r_1、r_2及HPA的Q、e值,作出了共聚物组成曲线,并由此计算出St-HPA共聚物的平均序列长度及序列长度分布。     

Copolymerization of N-Vinylcarbazole and Vinyl Acetate via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization

Summary: The reversible addition–fragmentation chain transfer (RAFT) random copolymerization of N-vinylcarbazole (NVC) and vinyl acetate (VAc) was carried out using s-benzyl-o-ethyl dithiocarbonate (BED) as the chain transfer agent and 2,2′-azoisobutyronitrile (AIBN) as the initiator in 1,4-dioxane solution at 70 °C. The polymerization showed the characteristics of ‘living’ free radical polymerization behaviors: first order kinetics, linear relationships between molecular weight and conversion, and narrow polydispersity of the polymers. The reactivity ratios of NVC and VAc were calculated via the Kelen–Tudos (KT) and non-linear error in variable (EVM) methods and showed as r₁ = 1.938 ± 0.191, r₂ = 0.116 ± 0.106. The thermal behavior of the copolymers with different content of NVC and VAc was investigated by DSC and TGA. The results showed that the introduction of a VAc segment into copolymer significantly reduced the T_g of the NVC homopolymers. FT-IR spectra, fluorescence spectra, and cyclic voltammetric behavior of these copolymers were also measured and compared with those of NVC homopolymers. The copolymers showed similar oxidative behavior to the NVC homopolymer. However, there was only one reductive potential peak shown for the copolymers at about 0.058 V.     

可逆加成-断裂链转移聚合研究进展

对可逆加成．断裂链转移(RAFT)聚合的反应机理、可逆加成．断裂链转移荆的合成方法及其反应动力学的研究进展分别进行了综述。     

Molecular Recognition Ability of Molecularly Imprinted Polymer Nano- and Micro-Particles by Reversible Addition-Fragmentation Chain Transfer Polymerization

The role of molecularly imprinted polymers (MIPs) is changing from academic to applied researches. Challenging problems about MIP will be more highlighted in applicable uses and solving these problems is vital. The controlled/“living” radical polymerization (CLRP) techniques are applicable to solve the challenging problems in MIPs. The “living” nature of CLRP helps to improve the heterogeneity of binding sites in MIPs as a main challenge where precise control over sizes, compositions, and surface functionalities is achieved. Among different techniques of CLRP, reversible addition-fragmentation chain transfer (RAFT) technique presents distinguished benefits such as compatibility and tolerance to a wide range of functional monomers and mild reaction conditions rather than other CLRP techniques. In this review, in order to obtain more insights into the potential benefits of RAFT polymerization in fabrication of nano and micro MIP networks, recent research in advanced MIP materials for different templates with improved morphology, efficiency, and binding capacities with respect to traditional free radical polymerization (FRP) will be discussed. MIPs prepared via RAFT method have advantages of MIPs as high performance molecular recognition devices and CLRP as controllable polymerization mechanism, simultaneously.     

可逆加成-断裂链转移自由基共聚合研究进展

与其它可控/活性自由基聚合相比,可逆加成-断裂链转移(RAFT)自由基聚合具有适用单体范围广、反应条件温和、不受聚合实施方法的限制等优点,因此成为目前高分子合成研究最为活跃的领域之一.通过它不但实现了广泛单体的可控/活性聚合,还合成了嵌段、接枝、梳型、星型、无规及梯度等结构的聚合物.本文综述了RAFT自由基共聚合领域的研究进展,内容主要包括已报道的RAFT自由基共聚合反应体系和RAFT过程对共聚产物组成的影响.     

可逆加成-断裂链转移自由基聚合与点击化学相结合在制备特殊结构聚合物中的应用

可逆加成一断裂链转移(RAFT)聚合作为一种新型活性自由基聚合方法,由于其具有单体适用面广、聚合条件温和、不受聚合方法的限制等优点,已经成为聚合物分子设计的有效手段之一.点击化学(Click chaemistry)是近几年发展起来的一种快速合成的新方法,是指选用易得原料,通过可靠、高效而又具有选择性的化学反应来实现碳杂...     

基于树形链转移剂的可逆加成断裂链转移聚合

可逆加成断裂链转移(RAFT)聚合是最近十多年来发展起来的一种活性/可控技术,链转移剂(CTA)为该技术的核心.本文介绍了采用R路径合成法、Z路径合成法合成R核与Z核树形链转移剂以及它们调控不同单体的RAFT聚合,合成树形-线性二嵌段共聚物、树形-线性-树形三嵌段共聚物和树形-星形聚合物等树枝状聚合物的研究进展.     

Preparation of a Pyrazosulfuron-Ethyl Imprinted Polymer with Hydrophilic External Layers by Reversible Addition-Fragmentation Chain Transfer Precipitation and Grafting Polymerization

A new imprinted polymer with both functions of molecular recognition and macromolecule exclusion was synthesized for selective extraction of pyrazosulfuron-ethyl and removal of humic acids in environmental analysis. In the preparation, spherical pyrazosulfuron-ethyl imprinted polymers were synthesized by reversible addition–fragmentation chain transfer (RAFT) precipitation polymerization. The hydrophilic polymer layers were then grafted on the surface of the imprinted polymer microspheres using post-RAFT polymerization. The conditions that influence the selectivity, size, and uniformity of the imprinted microspheres were studied systematically. The computer simulation was employed to study the template-monomer interaction. The solubility parameters of poly(MAA-co-EDMA) and porogen were calculated to investigate the relationship between the particle size and the solubility parameter. The results indicated that the pyrazosulfuron-ethyl imprinted polymers have special affinity for the template and several structurally related sulfonylurea herbicides. The molecularly imprinted polymer (MIP) with external hydrophilic chains not only had function of template retention, but also better function of protein/humic acid exclusion. This research demonstrates that multifunctional imprinted material with a narrow size distribution can be prepared by the RAFT polymerization.     

Reversible Addition-Fragmentation Chain Transfer Polymerization of Methyl Methacrylate in Microemulsion: The Influence of Reaction Conditions on Polymerization

The reversible addition-fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) using cetyltrimethylammonium bromide (CTAB) as surfactant and a difunctional RAFT agent S,S′-bis (α, α′-dimethylacetic acid) trithiocarbonate (BDAT) as chain transfer were conducted in microemulsion. The influence of polymerization temperature and concentration of RAFT agent on the polymerization were investigated, respectively. The results showed that the molecular weight of products increased linearly with conversion, the polydispersity indexes remained low value, and the polymerization processes were totally under control with increasing concentration of RAFT agent, the polymerization behavior exhibited living polymerization characters. In addition, the influence of RAFT concentration on the particle size was investigated by TEM. The results indicated that the particles were highly monodispersed and the particle size increased with increasing concentration of RAFT agent.     

Controlled Radical Polymerization of N-Vinylpyrrolidone by Reversible Addition-Fragmentation Chain Transfer Process

Summary: Poly(N-vinylpyrrolidone) (PNVP) was polymerized by RAFT process using diphenyldithiocarbamate of diethylmalonate (DPCM) as the reversible chain transfer agent in the presence of a small percentage of a conventional radical initiator (AIBN). The molar mass of the polymers synthesized by this method was found to increase with conversion and time. The presence of end group in the polymer chain could be confirmed by ¹H NMR spectra. The molar masses calculated using ¹H NMR spectroscopy and static light scattering (SLS) showed good agreement with the theoretical molar masses. The RAFT compound was fully consumed during the initial stages of the polymerization itself. The controlled nature of these polymers was further confirmed by generating diblock copolymers by sequential addition of monomers such as styrene or n-butyl acrylate (n-BA). PNVP efficiently participated as a macro-RAFT reagent, and cross-over reaction between the two blocks efficiently occurred. The successful diblock copolymer synthesis using PNVP as macro-transfer reagent further confirms the “controlled” nature of such synthetic procedure.