cis-to-trans isomerization promoted by pyridine as a crucial step for the selective preparation of trans-Pt(SAr)(Cl)(PAr'3)2

The general strategy for the syntheses of trans-Pt(SAr)(Cl)(PAr'3)2 (1) (Ar = Ph, C6H4-2-Me, C6H4-3-OMe C6H4-2-F, etc.; Ar' = Ph, C6H4-4-OMe, C6H4-4-Me, and C6H4-4-CF3) by the reaction of cis-PtCl2(PAr'3)2 with ArSH has been developed. The mechanistic investigation suggested that isomerization of cis-1 into trans-1 promoted by the combined use of C6H6 as a solvent and pyridine as a base was the key to the successful preparation of 1.     

The synthesis, structure and ethene polymerisation catalysis of mono(salicylaldiminato) titanium and zirconium complexes

The silyl ethers 3-But-2-(OSiMe3)C6H3CH=NR (2a-e) have been prepared by deprotonation of the known iminophenols (1a-e) and treatment with SiClMe3 (a, R = C6H5; b, R = 2,6-Pri2C6H3; c, R = 2,4,6-Me3C6H2; d, R = 2-C6H5C6H4; e, R = C6F5). 2a-c react with TiCl4 in hydrocarbon solvents to give the binuclear complexes [Ti{3-But-2-(O)C6H3CH=N(R)}Cl(mu-Cl3)TiCl3] (3a-c). The pentafluorophenyl species 2e reacts with TiCl4 to give the known complex Ti{3-But-2-(O)C6H3CH=N(R)}2Cl2. The mononuclear five-coordinate complex, Ti{3-But-2-(O)C6H3CH=N(2,4,6-Me3C6H2)}Cl3 (4c), was isolated after repeated recrystallisation of 3c. Performing the dehalosilylation reaction in the presence of tetrahydrofuran yields the octahedral, mononuclear complexes Ti{3-But-2-(O)C6H3CH=N(R)}Cl3(THF) (5a-e). The reaction with ZrCl4(THF)2 proceeds similarly to give complexes Zr{3-But-2-(O)C6H3CH=N(R)}Cl3(THF) (6b-e). The crystal structures of 3b, 4c, 5a, 5c, 5e, 6b, 6d, 6e and the salicylaldehyde titanium complex Ti{3-But-2-(O)C6H3CH=O}Cl3(THF) (7) have been determined. Activation of complexes 5a-e and 6b-e with MAO in an ethene saturated toluene solution gives polyethylene with at best high activity depending on the imine substituent.     

Mechanistic study on the coupling reaction of aryl bromides with arylboronic acids catalyzed by (iminophosphine)palladium(0) complexes. Detection of a palladium(II) intermediate with a coordinated boron anion

The complexes [Pd(eta2-dmfu)(P-N)] [P-N = 2-(PPh2)C6H4-1-CH=NR, R = C(6)H(4)OMe-4; CHMe2; C6H3Me2-2,6; C6H3(CHMe2)-2,6] react with an excess of BrC6H4R1-4 (R1= CF3; Me) yielding the oxidative addition products [PdBr(C6H4R1-4)(P-N)] at different rates depending on R [C6H4OMe-4 > C6H3(CHMe2)-2,6 > CHMe2 approximately C6H3Me2-2,6] and R1 (CF3> Me). In the presence of K2CO3 and activated olefins (ol = dmfu, fn), the latter compounds react with an excess of 4-R2C6H4B(OH)2 (R2= H, Me, OMe, Cl) to give [Pd(eta2-ol)(P-N)] and the corresponding biaryl through transmetallation and fast reductive elimination. The transmetallation proceeds via a palladium(II) intermediate with an O-bonded boron anion, the formation of which is markedly retarded by increasing the bulkiness of R. The intermediate was isolated for R = CHMe2, R1 = CF3 and R2= H. The boron anion is formulated as a diphenylborinate anion associated with phenylboronic acid and/or as a phenylboronate anion associated with diphenylborinic acid. In general, the oxidative addition proceeds at a lower rate than transmetallation and represents the rate-determining-step in the coupling reaction of aryl bromides with arylboronic acids catalyzed by [Pd(eta2-dmfu)(P-N)].     

Synthesis of chromium(0) and molybdenum(0) bis (eta(6)-arene) derivatives and their monoelectronic oxidation to [M(eta(6)-arene)(2)](+) cations

M(eta(6)-arene)(2) species (M = Cr, arene = 1,3,5-Me(3)C(6)H(3); M = Mo, arene = 1,3,5-Me(3)C(6)H(3), 1,3,5-(i)Pr(3)C(6)H(3)), have been prepared by a modified Fischer-Hafner synthesis or by metal vapour techniques. The reaction of Cr(eta(6)-1,3,5-Me(3)C(6)H(3))(2) with the fulvene derivatives pentacarbomethoxycyclopentadiene (pcmcpH), 1-benzoyl-6-hydroxy-6-phenylfulvene (dbcpH), or 1-benzoyl-3-nitro-6-hydroxy-6-phenylfulvene (dbncpH) proceeds with evolution of dihydrogen and formation of the ionic derivatives [Cr(eta(6)-1,3,5-Me(3)C(6)H(3))(2)][E], where E = pcmcp, dbcp, or dbncp. Mo(eta(6)-arene)(2) derivatives (arene = toluene, 1,3,5-Me(3)C(6)H(3), 1,3,5-(i)Pr(3)C(6)H(3)) are oxidized to [Mo(eta(6)-arene)(2)](+) by pcmcpH. The crystal and molecular structures of [M(eta(6)-1,3,5-R(3)C(6)H(3))(2)][pcmcp] (M = Cr, R = Me; M = Mo, R = Me, (i)Pr) have been solved by X-ray single crystal diffraction.     

Association reactions at low pressure. III. The C2H2+/C2H2 system

The association reactions, C4H2(+) + C2H2 and C4H3(+) + C2H2 have been examined at pressures between 8 x 10(-8) and 1 x 10(-4) Torr at 298 K in an ion cyclotron resonance mass spectrometer. Association occurred via two different mechanisms. At pressures below approximately 2 x 10(-6) Torr, the association was bimolecular having rate coefficients k2 = 2.7 x 10(-10) cm3 s-1 and 2.0 x 10(-10) cm3 s-1 for C4H2+ and C4H3+, respectively. At pressures above approximately 2 x 10(-6) Torr, termolecular association was observed with rate coefficients, k3 = 5.7 x 10(-23) cm6 s-1 and 1.3 x 10(-23) cm6 s-1 for C4H2+ and C4H3+, respectively, when M = C2H2. The termolecular rate constants with N2, Ar, Ne, and He as the third body, M, are also reported. We propose that the low pressure bimolecular association process was the result of radiative stabilization of the complex and the termolecular association process was the result of collisional stabilization. Elementary rate coefficients were obtained and the lifetime of the collision complex was > or = 57 microseconds for (C6H4+)* and > or = 18 microseconds for (C6H5+)*. At pressures below 1 x 10(-6) Torr, approximately 11% of the (C6H4+)* were stabilized by photon emission and the remaining approximately 89% reverted back to reactants, while approximately 24% of the (C6H5+)* were stabilized by photon emission and the remaining approximately 76% reverted back to reactants. The ionic products of the C2H2(+) + C2H2 reaction, C4H2+ and C4H3+, were found to be formed with enough internal energy that they did not react by the radiative association channel until relaxed by several nonreactive collisions with the bath gas.     

Dilacunary decatungstates functionalized by organometallic ruthenium(II), [{Ru(C6H6)(H2O)}{Ru(C6H6)}(gamma-XW10O36)]4- (X = Si, Ge)

The benzene-Ru(II)-supported dilacunary decatungstosilicate [{Ru(C6H6)(H2O)}{Ru(C6H6)}(gamma-SiW10O36)]4- and the isostructural decatungstogermanate [{Ru(C6H6)(H2O)}{Ru(C6H6)}(gamma-GeW10O36)]4- have been synthesized and characterized by multinuclear solution NMR, IR, elemental analysis, and electrochemistry. Single-crystal X-ray analysis was carried out on K4[{Ru(C6H6)(H2O)}{Ru(C6H6)}(gamma-SiW10O36)].9H2O (K-1), which crystallizes in the orthorhombic system, space group Pmn2(1), with a = 13.6702(3) A, b = 16.2419(4) A, c = 12.1397(2) A, and Z = 2, and on K4[{Ru(C6H6)(H2O)}{Ru(C6H6)}(gamma-GeW10O36)].7H2O (K-2), which also crystallizes in the orthorhombic system, space group Pmn2(1), with a = 13.6684(12) A, b = 16.297(2) A, c = 12.1607(13) A, and Z = 2. Polyanions 1 and 2 consist of a Ru(C6H6)(H2O) group and a Ru(C6H6) group linked to a dilacunary (gamma-XW10O36) Keggin fragment resulting in an assembly with idealized Cs symmetry. The Ru(C6H6)(H2O) group is bound at the lacunary polyanion site via two Ru-O(W) bonds, whereas the Ru(C6H6) group is bound on the side via three Ru-O(W) bonds. Polyanions 1 and 2 were synthesized in aqueous acidic medium at pH 2.5 by the reaction of [Ru(C6H6)Cl2]2 with [gamma-SiW10O36]8- and [gamma-GeW10O36]8-, respectively. The formal potentials are roughly the same for the first W waves of 1 and 2. However, important differences appear for the second W waves. These observations indicate different acid-base properties for the reduced forms of 1 and 2. Three oxidation processes were detected: the oxidation of the Ru center is followed first by irreversible electrocatalytic processes of the Ru-benzene moiety and then of the electrolyte. Comparison of this behavior with that of the precursor reagent, [Ru(C6H6)Cl2]2, was useful to understand the main oxidation processes. A ligand substitution reaction was observed upon addition of dimethyl sulfoxide (dmso) to 1, 2, or [Ru(C6H6)Cl2]2. This reaction facilitates substantially the oxidation of the Ru center. The dmso was oxidized with large electrocatalytic currents more efficiently in the presence of 1 and 2 than with [Ru(C6H6)Cl2]2.     

Catalytic ethylene polymerisation in carbon dioxide as a reaction medium with soluble nickel(II) catalysts

A series of neutral Ni(II)-salicylaldiminato complexes substituted with perfluorooctyl- and trifluoromethyl groups, [Ni{kappa(2)-N,O-6-C(H)==NAr-2,4-R'(2)C(6)H(2)O}(Me)(pyridine)] (6 a: Ar=2,6-{4-(F(17)C(8))C(6)H(4)}(2)C(6)H(3), R'=I; 6 b: Ar=2,6-{4-(F(3)C)C(6)H(4)}(2)C(6)H(3), R'=I; 6 c: Ar=2,6-{3,5-(F(3)C)(2)C(6)H(3)}(2)C(6)H(3), R'=3,5-(F(3)C)(2)C(6)H(3); 6 d: Ar=2,6-{4-(F(17)C(8))C(6)H(4)}(2)C(6)H(3), R'=3,5-(F(3)C)(2)C(6)H(3); 6 e: Ar=2,6-{3,5-(F(3)C)(2)C(6)H(3)}(2)C(6)H(3), R'=I) were studied as catalyst precursors for ethylene polymerisation in supercritical CO(2). Catalyst precursors 6 a and 6 c, which are soluble in scCO(2), afford the highest polymer yields, corresponding to 2 x 10(3) turnovers. Semicrystalline polyethylene (M(n) typically 10(4) g mol(-1)) is obtained with variable degrees of branching (11 to 24 branches per 1000 carbon atoms, predominantly Me branches) and crystallinities (54 to 21 %), depending on the substitution pattern of the catalyst.     

Phosphino imidazoles and imidazolium salts for Suzuki C-C coupling reactions

The consecutive syntheses of imidazoles 1-(4-X-C(6)H(4))-4,5-R(2)-(c)C(3)HN(2) (3a, X = Br, R = H; 3b, X = I, R = Me; 3c, X = H, R = Me; 5, X = Fc, R = H; 7, X = C≡CFc, R = H; 9, X = C(6)H(5), R = Me; Fc = Fe(η(5)-C(5)H(4))(η(5)-C(5)H(5))), phosphino imidazoles 1-(4-X-C(6)H(4))-2-PR'(2)-4,5-R(2)-(c)C(3)N(2) (11a-k; X = Br, I, Fc, FcC≡C, Ph; R = H, Me; R' = Ph, (c)C(6)H(11), (c)C(4)H(3)O), imidazolium salts [1-(4-X-C(6)H(4))-3-R'-4,5-R(2)-(c)C(3)HN(2)]I (16a; X = Br, R = H, R' = n-Bu; 16b, X = Br, R = H, R' = n-C(8)H(17); 16c, X = I, R = Me, R' = n-C(8)H(17), 16d, X = H, R = Me, R' = n-C(8)H(17)) and phosphino imidazolium salts [1-C(6)H(5)-2-PR'(2)-3-n-C(8)H(17)-4,5-Me(2)-(c)C(3)N(2)]PF(6) (17a, R' = C(6)H(5); 17b, R' = (c)C(6)H(11)) or [1-(4-P(C(6)H(5))(2)-C(6)H(4))-3-n-C(8)H(17)-4,5-Me(2)-(c)C(3)HN(2)]PF(6), (20) and their selenium derivatives 1-(4-X-C(6)H(4))-2-P([double bond, length as m-dash]Se)R'(2)-4,5-R(2)-(c)C(3)N(2) (11a-Se-f-Se; X = Br, I; R = H, Me; R' = C(6)H(5), (c)C(6)H(11), (c)C(4)H(3)O) are reported. The structures of 11a-Se and [(1-(4-Br-C(6)H(4))-(c)C(3)H(2)N(2)-3-n-Bu)(2)PdI(2)] (19) in the solid state were determined. Cyclovoltammetric measurements were performed with the ferrocenyl-containing molecules 5 and 7 showing reversible redox events at E(0) = 0.108 V (ΔE(p) = 0.114 V) (5) and E(0) = 0.183 V (ΔE(p) = 0.102 V) (7) indicating that 7 is more difficult to oxidise. Imidazole oxidation does not occur up to 1.3 V in dichloromethane using [(n-Bu)(4)N][B(C(6)F(5))(4)] as supporting electrolyte, whereas an irreversible reduction is observed between -1.2 - -1.5 V. The phosphino imidazoles 11a-k and the imidazolium salts 17a,b and 20, respectively, were applied in the Suzuki C-C cross-coupling of 2-bromo toluene with phenylboronic acid applying [Pd(OAc)(2)] as palladium source. Depending on the electronic character of 11a-k, 17a,b and 20 the catalytic performance of the in situ generated catalytic active species can be predicted. As assumed, more electron-rich phosphines with their higher donor capability show higher activity and productivity. Additionally, 11e was applied in the coupling of 4-chloro toluene with phenylboronic acid showing an excellent catalytic performance when compared to catalysts used by Fu, Beller and Buchwald. Furthermore, 11e is eligible for the synthesis of sterically hindered biaryls under mild reaction conditions. C-C Coupling reactions with the phosphino imidazolium salts 17b and 20 in ionic liquids [BMIM][PF(6)] and [BDMIM][BF(4)] were performed, showing less activity than in common organic solvents.     

Amino-functionalised diarylphosphide complexes of the alkali metals and lanthanum

The secondary phosphines Ar(C6H4-2-CH2NMe2)PH [Ar = mes (3), Tripp (4)] may be isolated in good yields from reactions between Li(C6H4-2-CH2NMe2) and the respective dichlorophosphine, followed by reduction with LiAlH4 [mes = 2,4,6-Me3C6H2, Tripp = 2,4,6-Pri3C6H2]. Metalation of either 3 or 4 with BunLi gives the corresponding lithium compound; the lithium derivative of 3 was isolated as the separated ion pair complex [Li(12-crown-4)2][(mes)(C6H4-2-CH2NMe2)P].THF (5). The lithium complexes Ar(C6H4-2-CH2NMe2)PLi undergo metathesis reactions with either NaOBut or KOBut to give the heavier alkali metal phosphides {Ar(C6H4-2-CH2NMe2)P}M.1/2OEt2 [Ar = mes, M = Na (8), K (9); Ar = Tripp, M = K (10)]. Metathesis reactions between 9 and LaI3(THF)4 give only intractable products; in contrast, a metathesis reaction between 10 and LaI3(THF)4 yields the heteroleptic complex {(Tripp)(C6H4-2-CH2NMe2)P}2LaI (11). Compound 11 reacts cleanly with K{N(SiMe3)2} to give {(Tripp)(C6H4-2-CH2NMe2)P}2La{N(SiMe3)2} (14). Compounds 3-5, 8-11 and 14 have been characterised by multi-element NMR spectroscopy; in addition, compounds 5, 11 and 14 have been studied by X-ray crystallography.     

Bimetallic phenylene-bridged Cp/amide titanium complexes and their olefin polymerization

Bimetallic dichlorotitanium complexes, {2,6-[eta(5)-2,5-Me2C5H2](2)-4-R-C6H2N-microN}{Ti(IV)Cl2}2 (, R=Me; , R=F) and 4,4'-A[{2-(eta(5)-2,3,5-Me3C5H)C6H3NC6H11-kappaN}Ti(IV)Cl2]2 (, A=CH2; , A=O; , A=ortho-C6H4) are prepared via a key step of the Suzuki-coupling reaction of 2-dihydroxyboryl-3-methyl-2-cyclopenten-1-one () with dibromo-compounds. The solid state structure of was determined by X-ray crystallography. Complexes and are not active for ethylene/1-hexene copolymerization. Meanwhile, the complexes are highly active and their activities are higher than that of the mononuclear analogue, {2-(eta(5)-2,3,5-Me3C5H)C6H3NC6H11-kappaN}Ti(IV)Cl2 (). The molecular weights of the polymers obtained with the bimetallic complexes are higher than that of the polymer obtained using . Slightly higher contents of long-chain-branching are observed for the copolymers obtained using the bimetallic system.     

Energetics of cresols and of methylphenoxyl radicals

Combustion calorimetry studies were used to determine the standard molar enthalpies of formation of o-, m-, and p-cresols, at 298.15 K, in the condensed state as Delta(f)H(m) degrees (o-CH(3)C(6)H(4)OH,cr) = -204.2 +/- 2.7 kJ.mol(-1), Delta(f)H(m) degrees (m-CH(3)C(6)H(4)OH,l) = -196.6 +/- 2.1 kJ.mol(-1), and Delta(f)H(m) degrees (p-CH(3)C(6)H(4)OH,cr) = -202.2 +/- 3.0 kJ.mol(-1). Calvet drop calorimetric measurements led to the following enthalpy of sublimation and vaporization values at 298.15 K: Delta(sub)H(m) degrees (o-CH(3)C(6)H(4)OH) = 73.74 +/- 0.46 kJ.mol(-1), Delta(vap)H(m) degrees (m-CH(3)C(6)H(4)OH) = 64.96 +/- 0.69 kJ.mol(-1), and Delta(sub)H(m) degrees (p-CH(3)C(6)H(4)OH) = 73.13 +/- 0.56 kJ.mol(-1). From the obtained Delta(f)H(m) degrees (l/cr) and Delta(vap)H(m) degrees /Delta(sub)H(m) degrees values, it was possible to derive Delta(f)H(m) degrees (o-CH(3)C(6)H(4)OH,g) = -130.5 +/- 2.7 kJ.mol(-1), Delta(f)H(m) degrees (m-CH(3)C(6)H(4)OH,g) = -131.6 +/- 2.2 kJ.mol(-1), and Delta(f)H(m) degrees (p-CH(3)C(6)H(4)OH,g) = -129.1 +/- 3.1 kJ.mol(-1). These values, together with the enthalpies of isodesmic and isogyric gas-phase reactions predicted by the B3LYP/cc-pVDZ, B3LYP/cc-pVTZ, B3P86/cc-pVDZ, B3P86/cc-pVTZ, MPW1PW91/cc-pVTZ, CBS-QB3, and CCSD/cc-pVDZ//B3LYP/cc-pVTZ methods, were used to obtain the differences between the enthalpy of formation of the phenoxyl radical and the enthalpies of formation of the three methylphenoxyl radicals: Delta(f)H(m) degrees (C(6)H(5)O*,g) - Delta(f)H(m) degrees (o-CH(3)C(6)H(4)O*,g) = 42.2 +/- 2.8 kJ.mol(-1), Delta(f)H(m) degrees (C(6)H(5)O*,g) - Delta(f)H(m) degrees (m-CH(3)C(6)H(4)O*,g) = 36.1 +/- 2.4 kJ.mol(-1), and Delta(f)H(m) degrees (C(6)H(5)O*,g) - Delta(f)H(m) degrees (p-CH(3)C(6)H(4)O*,g) = 38.6 +/- 3.2 kJ.mol(-1). The corresponding differences in O-H bond dissociation enthalpies were also derived as DH degrees (C(6)H(5)O-H) - DH degrees (o-CH(3)C(6)H(4)O-H) = 8.1 +/- 4.0 kJ.mol(-1), DH degrees (C(6)H(5)O-H) - DH degrees (m-CH(3)C(6)H(4)O-H) = 0.9 +/- 3.4 kJ.mol(-1), and DH degrees (C(6)H(5)O-H) - DH degrees (p-CH(3)C(6)H(4)O-H) = 5.9 +/- 4.5 kJ.mol(-1). Based on the differences in Gibbs energies of formation obtained from the enthalpic data mentioned above and from published or calculated entropy values, it is concluded that the relative stability of the cresols varies according to p-cresol < m-cresol < o-cresol, and that of the radicals follows the trend m-methylphenoxyl < p-methylphenoxyl < o-methylphenoxyl. It is also found that these tendencies are enthalpically controlled.     

o-Phenylene-bridged Cp/sulfonamido titanium complexes for ethylene/1-octene copolymerization

The Suzuki-coupling reaction of 2-(dihydroxyboryl)-3,4-dimethyl-2-cyclopenten-1-one and 2-(dihydroxyboryl)-3-methyl-2-cyclopenten-1-one with 2-bromoaniline derivatives affords cyclopentenone compounds from which cyclopentadiene compounds, 4,6-R'(2)-2-(2,5-Me2C5H3)C6H2NH2 and 4,6-R'(2)-2-(2,3,5-Me3C5H2)C6H2NH2 are prepared. After sulfonation of the -NH2 group with p-TsCl, metallation is carried out by successive addition of Ti(NMe2)4 and Me2SiCl2 affording o-phenylene-bridged Cp/sulfonamido titanium dichloride complexes, [4,6-R'(2)-2-(2,5-Me2C5H2)C6H2NSO2C6H4CH3)]TiCl2 (R'=H, ; R'=Me, ; R'=F, ) and [4,6-R'(2)-2-(2,3,5-Me3C5H)C6H2NSO2C6H4CH3)]TiCl2 (R'=H, ; R'=Me, ; R'=F, ). The molecular structures of and [2-(2,5-Me2C5H2)C6H4NSO2C6H4CH3)]Ti(NMe2)2 are determined by X-ray crystallography. The Cp(centroid)-Ti-N angle in is smaller (100.90 degrees) than that observed for the CGC (constrained-geometry catalyst), [Me2Si(eta5-Me4Cp)(NtBu)]TiCl2 (107.6 degrees) indicating a more "constrained feature" in than in the CGC. Complex shows the highest activity among the newly prepared complexes in ethylene/1-octene copolymerization but it is slightly inferior to the CGC in terms of activity, comonomer-incorporation ability, and molecular weight of the obtained polymers.     

Synthesis and structural studies of NCN diimine palladium pincer complexes bearing m-terphenyl scaffolds

The reaction of 2,6-[2-{RN=C(H)}C(6)H(4)](2)C(6)H(3)I [R = Ph (4), Cy (5), 2,6-Me(2)C(6)H(3) (6), 2,4,6-Me(3)C(6)H(2) (7), (S)-alpha-methylbenzyl (8)] with Pd(2)(dba)(3) afforded the NCN diimine pincer palladium complexes [2,6-[2-{RN=C(H)}C(6)H(4)](2)C(6)H(3)PdI] (9-13) by oxidative addition of the C-I bonds of the ligand precursors. Single-crystal X-ray diffraction analyses of complexes 9-13 reveal formal C(2)-symmetric environments. Variable-temperature NMR studies of complexes 11 and 12 show hindered rotation about the N-Ar bonds and also suggest that atropisomers of complexes 9-13 do not interconvert on the NMR time scale. Consistent with this proposal, isolation of the two possible isomers of 13 (13a and 13b) was possible, and their structures and NMR properties have been examined in detail.     

Synthesis, structures and reactions of lithium complexes of [(o-RCHC6H4)PPh2=NSiMe3]-(R = H, SiMe3) ligands

N-Trimethylsilyl o-methylphenyldiphenylphosphinimine, (o-MeC6H4)PPh2=NSiMe3 (1), was prepared by reaction of Ph2P(Br)=NSiMe3 with o-methylphenyllithium. Treatment of 1 with LiBun and then Me3SiCl afforded (o-Me3SiCH2C6H4)PPh2=NSiMe3 (2). Lithiations of both 1 and 2 with LiBu(n) in the presence of tmen gave crystalline lithium complexes [Li{CH(R)C6H4(PPh(2=NSiMe3)-.tmen](3, R = H; 4, R = SiMe3). From the mother liquor of 4, traces of the tmen-bridged complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}]2(mu-tmen) (5) were obtained. Reaction of 2 with LiBun in Et2O yielded complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}.OEt2] (6). Reaction of lithiated with Me2SiCl2 in a 2:1 molar ratio afforded dimethylsilyl-bridged compound Me2Si[CH2C6H4(PPh2=NSiMe3)-2]2 (7). Lithiation of 7 with two equivalents of LiBun in Et2O yielded [Li2{(CHC6H4(PPh2=NSiMe3)-2)2SiMe2}.0.5OEt2](8.0.5OEt2). Treatment of 4 with PhCN formed a lithium enamide complex [Li{N(SiMe3)C(Ph)CHC6H4(PPh2=NSiMe3)-2}.tmen] (9). Reaction of two equivalents of 5 with 1,4-dicyanobenzene gave a dilithium complex [{Li(OEt2)2}2(1,4-{C(N(SiMe3)CHC6H4(PPh2=NSiMe3)-2}2C6H4)] (10). All compounds were characterised by NMR spectroscopy and elemental analyses. The structures of compounds 2, 3, 5, 6 and 9 have been determined by single crystal X-ray diffraction techniques.     

Unusual reactions of [{micro-(phthalazine-N2:N3)}Fe2(micro-CO)(CO)6] with organolithium reagents. A novel coordination mode of 1,2-diazane diiron carbonyl compounds

[{Micro-(phthalazine-N2:N3)}Fe2(micro-CO)(CO)6](1) reacts with organolithium reagents, RLi (R = CH3, C6H5, p-CH3C6H4, p-CH3OC6H4, p-CF3C6H4, p-C6H5C6H4), followed by treatment with Me3SiCl to give the novel diiron carbonyl complexes with a saturated N-N six-membered diazane ring ligand, [{C6H4CH(R)NNCH2}Fe2(C=O)(CO)6](2, R = CH3; 3, R = C6H5; 4, R =p-CH3C6H4; 5, R =p-CH3OC6H4; 6, R =p-CF3C6H4; 7, R =p-C6H5C6H4). Compounds 4 and 5 were treated with [(NH4)2Ce(NO3)6] to afford the aryl-substituted phthalazine-coordinated diiron carbonyl compounds [(micro-{1-(p-CH3C6H4)-phthalazine-N2:N3})Fe2(micro-CO)(CO)6](8) and [(micro-{1-(p-CH3OC6H4)-phthalazine-N2:N3})Fe2(micro-CO)(CO)6](9), respectively. The structures of complexes 4 and 9 have been established by X-ray diffraction studies.     

Studies of the kinetics and thermochemistry of the forward and reverse reaction Cl + C6H6 = HCl + C6H5

The laser flash photolysis resonance fluorescence technique was used to monitor atomic Cl kinetics. Loss of Cl following photolysis of CCl4 and NaCl was used to determine k(Cl + C6H6) = 6.4 x 10(-12) exp(-18.1 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 578-922 K and k(Cl + C6D6) = 6.2 x 10(-12) exp(-22.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 635-922 K. Inclusion of literature data at room temperature leads to a recommendation of k(Cl + C6H6) = 6.1 x 10(-11) exp(-31.6 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) for 296-922 K. Monitoring growth of Cl during the reaction of phenyl with HCl led to k(C6H5 + HCl) = 1.14 x 10(-12) exp(+5.2 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 294-748 K, k(C6H5 + DCl) = 7.7 x 10(-13) exp(+4.9 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 292-546 K, an approximate k(C6H5 + C6H5I) = 2 x 10(-11) cm(3) molecule(-1) s(-1) over 300-750 K, and an upper limit k(Cl + C6H5I) < or = 5.3 x 10(-12) exp(+2.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 300-750 K. Confidence limits are discussed in the text. Third-law analysis of the equilibrium constant yields the bond dissociation enthalpy D(298)(C6H5-H) = 472.1 +/- 2.5 kJ mol(-1) and thus the enthalpy of formation Delta(f)H(298)(C6H5) = 337.0 +/- 2.5 kJ mol(-1).     

Al and Zn complexes bearing N,N,N-tridentate quinolinyl anilido-imine ligands: synthesis, characterization and catalysis in l-lactide polymerization

Reactions of N,N,N-tridentate quinolinyl anilido-imine ligands with AlMe(3) afford mononuclear aluminum complexes {κ(3)-[{2-[ArN[double bond, length as m-dash]C(H)]C(6)H(4)}N(8-C(9)H(6)N)]}AlMe(2) (Ar = 2,6-Me(2)C(6)H(3) (1a), 2,6-Et(2)C(6)H(3) (1b), 2,6-(i)Pr(2)C(6)H(3) (1c)) or dinuclear complexes AlMe(3){κ(1)-[{2-[ArN[double bond, length as m-dash]C(H)C(6)H(4)]N(8-C(9)H(6)N)}-κ(2)]AlMe(2) (R = 2,6-Me(2)C(6)H(3) (2a), 2,6-Et(2)C(6)H(3) (2b), 2,6-(i)Pr(2)C(6)H(3) (2c)) depending on the ratios of reactants used. Similar reactions of ZnEt(2) with these ligands give the monoligated ethyl zinc complexes {κ(3)-[{2-[ArN[double bond, length as m-dash]C(H)]C(6)H(4)}N(8-C(9)H(6)N)]}ZnEt (Ar = 2,6-Me(2)C(6)H(3) (3a), 2,6-Et(2)C(6)H(3) (3b), 2,6-(i)Pr(2)C(6)H(3) (3c)) or bisligated complexes {κ(3)-[{2-[ArN[double bond, length as m-dash]C(H)]C(6)H(4)}N(8-C(9)H(6)N)]}Zn{κ(2)-[{2-[ArN[double bond, length as m-dash]C(H)]C(6)H(4)}N(8-C(9)H(6)N)]} (Ar = 2,6-Me(2)C(6)H(3) (4a), 2,6-Et(2)C(6)H(3) (4b), 2,6-(i)Pr(2)C(6)H(3) (4c)). These complexes were well characterized by NMR and the structures of 1a, 2a, 2c, 3b and 4c were confirmed by X-ray diffraction analysis. The aluminum and zinc complexes were tested to initiate lactide polymerization in which the zinc complexes show moderate to high activities in the presence of benzyl alcohol.     

New titanium complexes with symmetric or asymmetric cis-9,10-dihydrophenanthrenediamide ligands formed through sequential intramolecular C-C bond-forming reactions

A series of new titanium(IV) complexes with symmetric or asymmetric cis-9,10-dihydrophenanthrenediamide ligands, cis-9,10-PhenH(2)(NR)(2)Ti(O(i)Pr)(2) [PhenH(2) = 9,10-dihydrophenanthrene, R = 2,6-(i)Pr(2)C(6)H(3) (2a), 2,6-Et(2)C(6)H(3) (2b), 2,6-Me(2)C(6)H(3) (2c)], cis-9,10-PhenH(2)(NR(1))(NR(2))Ti(O(i)Pr)(2) [R(1) = 2,6-(i)Pr(2)C(6)H(3), R(2) = 2,6-Et(2)C(6)H(3) (2d); R(1) = 2,6-(i)Pr(2)C(6)H(3), R(2) = 2,6-Me(2)C(6)H(3) (2e)], and [cis-9,10-PhenH(2)(NR(1))(2)][o-C(6)H(4)(CH=NR(2))]TiO(i)Pr [R(1) = 2,6-(i)Pr(2)C(6)H(3), R(2) = 2,6-Et(2)C(6)H(3) (3a); R(1) = 2,6-(i)Pr(2)C(6)H(3), 2,6-Me(2)C(6)H(3) (3b)], have been synthesized from the reactions of TiCl(2)(O(i)Pr)(2) with o-C(6)H(4)(CH=NR)Li [R = 2,6-(i)Pr(2)C(6)H(3), 2,6-Et(2)C(6)H(3), 2,6-Me(2)C(6)H(3)]. The symmetric complexes 2a-2c were obtained from the reactions of TiCl(2)(O(i)Pr)(2) with 2 equiv of the corresponding o-C(6)H(4)(CH=NR)Li followed by intramolecular C-C bond-forming reductive elimination and oxidative coupling processes, while the asymmetric complexes 2d-2e were formed from the reaction of TiCl(2)(O(i)Pr)(2) with two different types of o-C(6)H(4)(CH=NR)Li sequentially. The complexes 3a and 3b were also isolated from the reactions for complexes 2d and 2e. All complexes were characterized by (1)H and (13)C NMR spectroscopy, and the molecular structures of 2a, 2b, 2e, and 3a were determined by X-ray crystallography.     

Preparations, structures, and electrochemical studies of aryldiazene complexes of rhenium: syntheses of the first heterobinuclear and heterotrinuclear derivatives with bis(diazene) or bis(diazenido) bridging ligands

The mono- and binuclear aryldiazene complexes [Re(C6H5N=NH)(CO)5-nPn]BY4 (1-5) and [(Re(CO)5-nPn)2-(mu-HN=NAr-ArN=NH)](BY4)2 (6-12) [P = P(OEt)3, PPh(OEt)2, PPh2OEt; n = 1-4; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-(2-CH3)C6H3-C6H3(2-CH3), 4,4'-C6H4-CH2-C6H4; Y = F, Ph) were prepared by reacting the hydride species ReH(CO)5-nPn with the appropriate mono- and bis(aryldiazonium) cations. These compounds, as well as other prepared compounds, were characterized spectroscopically (IR; 1H, 31P, 13C, and 15N NMR data), and 1a was also characterized by an X-ray crystal structure determination. [Re(C6H5N=NH)(CO)(P(OEt)3)4]BPh4 (1a) crystallizes in space group P1 with a = 15.380(5) A, b = 13.037(5) A, c = 16.649(5) A, alpha = 90.33(5) degrees, beta = 91.2(1) degrees, gamma = 89.71(9) degrees, and Z = 2. The "diazene-diazonium" complexes [M(CO)3P2(HN=NAr-ArN identical to N)](BF4)2 (13-15, 17) [M = Re, Mn; P = PPh2OEt, PPh2OMe, PPh3; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4] and [Re(CO)4(PPh2OEt)(4,4'-HN=NC6H4-C6H4N identical to N)](BF4)2 (16b) were synthesized by allowing the hydrides MH(CO)3P2 or ReH(CO)4P to react with equimolar amounts of bis(aryldiazonium) cations under appropriate conditions. Reactions of diazene-diazonium complexes 13-17 with the metal hydrides M2H2P'4 and M2'H(CO)5-nP"n afforded the heterobinuclear bis(aryldiazene) derivatives [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2HP'4](BPh4)2 (ReFe, ReRu, ReOs, MnRu, MnOs) and [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2'(CO)5-nP"n](BPh4)2 (ReMn, MnRe) [M1 = Re, Mn; M2 = Fe, Ru, Os; M2' = Mn, Re; P = PPh2OEt, PPh2OMe; P',P" = P(OEt)3, PPh(OEt)2; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4; n = 1, 2]. The heterotrinuclear complexes [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)M(P(OEt)3)4(mu-4,4'-HN=NC6H4- C6H4N=NH)Mn(CO)3(PPh2OEt)2](BPh4)4 (M = Ru, Os) (ReRuMn, ReOsMn) were obtained by reacting the heterobinuclear complexes ReRu and ReOs with the appropriate diazene-diazonium cations. The heterobinuclear complex with a bis(aryldiazenido) bridging ligand [Mn(CO)2(PPh2OEt)2(mu-4,4'-N2C6H4-C6H4N2)Fe(P(OEt)3)4]BPh4 (MnFe) was prepared by deprotonating the bis(aryldiazene) compound [Mn(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)Fe(4- CH3C6H4CN)(P(OEt)3)4](BPh4)3. Finally, the binuclear compound [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N2)Fe(CO)2(P(OPh)3)2](BPh4)2 (ReFe) containing a diazene-diazenido bridging ligand was prepared by reacting [Re(CO)3(PPh2OEt)2(4,4'-HN=NC6H4-C6H4N identical to N)]+ with the FeH2(CO)2(P(OPh)3)2 hydride derivative. The electrochemical reduction of mono- and binuclear aryldiazene complexes of both rhenium (1-12) and the manganese, as well as heterobinuclear ReRu and MnRu complexes, was studied by means of cyclic voltammetry and digital simulation techniques. The electrochemical oxidation of the mono- and binuclear aryldiazenido compounds Mn(C6H5N2)(CO)2P2 and (Mn(CO)2P2)2(mu-4,4'-N2C6H4-C6H4N2) (P = PPh2OEt) was also examined. Electrochemical data show that, for binuclear compounds, the diazene bridging unit allows delocalization of electrons between the two different redox centers of the same molecule, whereas the two metal centers behave independently in the presence of the diazenido bridging unit.     

Preparation, characterization, and magnetic behavior of the ln derivatives (ln = nd, la) of a 2,6-diiminepyridine ligand and corresponding dianion

An unprecedented Nd[2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N=C(CH(3))](2)(C(5)H(3)N)]NdI(2)(THF) (1) complex was prepared by oxidizing metallic Nd with I(2) in THF and in the presence of 2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N=C(CH(3))](2)(C(5)H(3)N). The magnetic behavior at variable T clearly indicated that the complex should be regarded as a trivalent Nd atom antiferromagnetically coupled to a radical anion. By using the doubly deprotonated form of the diimino pyridine ligand [[2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N-C=CH(2)](2)(C(5)H(3)N)](2-) (2) the corresponding trivalent complexes [[2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N-C=CH(2)](2)(C(5)H(3)N)]Ln (THF)](mu-Cl)(2)[Li(THF)(2)].0.5 (hexane) [Ln = Nd (3), La (4)] were obtained and characterized. Reduction of these species afforded electron transfer to the ligand system which gave ligand dimerization via C-C bond formation through one of the two ene-amido functions of each molecule. The resulting dinuclear [[([2,6-(i-Pr)(2)C(6)H(5)]N-C=(CH(2)))(C(5)H(3)N)([2,6-(i-Pr)(2)C(6)H(5)]N=CCH(2))]Ln(THF)(2)(mu-Cl)[Li(THF)(3)])(2).2(THF) [Ln = Nd (5), La (6)] were isolated and characterized.