Organometallic synthesis and electrophoretic characterization of high-quality ZnS:Mn/ZnS core/shell nanoparticles for bioanalytical applications

A novel and facile preparation method for colloidal ZnS nanoparticles doped with Mn²⁺ is introduced, using a simple one pot heating process followed by a capping procedure for saturation of the surface bound doping atoms to increase the nanoparticles’ stability and photoluminescence quantum yield. The particles were transferred into water with a standard ligand exchange method and investigated by means of laser Doppler electrophoresis, agarose gel electrophoresis, and isotachophoresis. Correspondence: Alexey Merkulov, Freiburg Materials Research Centre (FMF), University of Freiburg, Stefan-Meier-Strasse 21, D-79104 Freiburg, Germany     

On doping CdS/ZnS core/shell nanocrystals with Mn

This paper presents a mechanistic study on the doping of CdS/ZnS core/shell semiconductor nanocrystals with Mn based on a three-step synthesis, which includes host-particle synthesis, Mn-dopant growth, and ZnS-shell growth. We used a combination of electron paramagnetic resonance spectroscopy (EPR) and inductively coupled plasma atomic emission spectroscopy (ICP) to monitor Mn-doping level and growth yield during doping synthesis at both the dopant-growth and ZnS-shell-growth steps. First, our kinetic study shows that Mn adsorption onto the nanocrystal surface includes the formation of weakly and strongly bound Mn. The formation of weakly bound Mn is associated with a chemical equilibrium between adsorbed Mn species on the nanocrystal surface and free Mn species in growth solution, while the formation of strongly bound Mn exhibits first-order kinetics with an activation-energy barrier of 211 +/- 13 kJ/mol. Second, our results demonstrate that both weakly and strongly bound Mn can be removed from the surface of nanocrystals during ZnS-shell growth. The replacement of strongly bound Mn requires a higher temperature than that of weakly bound Mn. The yield of the replacement of strongly bound Mn is strongly dependent on the temperature of ZnS-shell growth. Third, our results show that the Mn-growth yield is not dependent on the size and crystal structure of nanocrystals. All together, these results suggest a mechanism in which nanocrystal doping is determined by the chemical kinetics of three activation-controlled processes: dopant adsorption, replacement, and ZnS-shell growth.     

Mn:ZnSe/ZnS核-壳结构纳米晶的无膦法制备和光学性质

以溶于十八烯的Se作为Se前驱体,在无膦条件下制备得到了具有较高量子产率的Mn:ZnSe纳米晶.为了进一步提高纳米晶的稳定性和发光强度,运用外延生长的方法进行ZnS壳层包覆并得到了具有核-壳结构的Mn:ZnSe/ZnS纳米晶.X射线衍射、透射电子显微镜及吸收和荧光光谱测试结果表明,该方法合成的Mn:ZnSe纳米晶以及核-壳结构Mn:ZnSe/ZnS纳米晶均为闪锌矿结构,具有良好的单分散性,包覆ZnS外壳层后量子产率可达到60%以上.此外,对ZnS壳层厚度和Mn2+的掺杂量对Mn:ZnSe/ZnS纳米晶发光强度的影响及发光机制也进行了初步讨论.     

Radial-position-controlled doping in CdS/ZnS core/shell nanocrystals

In this paper, we report a new doping approach using a three-step synthesis to make high-quality Mn-doped CdS/ZnS core/shell nanocrystals. This approach allows precise control of the Mn radial position and doping level in the core/shell nanocrystals. On the basis of this synthetic advance, we have demonstrated the first example in which optical properties of Mn-doped nanocrystals strongly depend on Mn radial positions inside the nanocrystals. In addition, we have synthesized nanocrystals with a room-temperature Mn-emission quantum yield of 56%, which is nearly twice as high as that of the best Mn-doped nanocrystals reported previously. Nanocrystals with such a high-emission quantum yield are very important to applications such as nanocrystal-based biomedical diagnosis.     

Synthesis and characterization of Co/CdSe core/shell nanocomposites: bifunctional magnetic-optical nanocrystals

Nanocomposite materials provide the possibility for multifunctional properties in contrast with their more-limited single-component counterparts. Here, we report the synthesis and characterization of the first all-inorganic core/shell hybrid magnetic-optical nanoparticle, cobalt/cadmium selenide. The core/shell nanocrystals are prepared in a facile one-pot reaction, and their microstructure is analyzed using low- and high-resolution transmission electron microscopy. Using magnetic and optical characterization, we demonstrate bifunctional behavior, whereby the core retains the magnetic properties of the starting Co nanoparticle, and the shell emits similarly to a single-component CdSe nanoparticle. Interestingly, while the coercivity was found to be unchanged by shell formation, the blocking temperature for the composite structure was observed to be substantially lower (Co: >350 K; Co/CdSe: 240 K). In addition, we observed that at low temperatures (20 K) shell CdSe photoluminescence (PL) decay was very rapid (<1 ns). In contrast, nanocrystalline CdSe PL decay is typically much slower at such temperatures (>50 ns). Finally, we propose possible explanations for the unusual magnetic and optical behavior of the core/shell hybrid nanostructures.     

CdS:Mn nanocrystals passivated by ZnS: synthesis and luminescent properties

Synthesis and characterization of highly luminescent ZnS-passivated CdS:Mn (CdS:Mn/ZnS) core/shell structured nanocrystals are reported. Mn-doped CdS core nanocrystals are produced ranging from 1.5 to 2.3 nm in diameter with epitaxial ZnS shell of wider band gap via a reverse micelle process. UV irradiation-stimulated photo-oxidation of the ZnS shell results in formation of sulfate (ZnSO(4)) as determined by x-ray photoelectron spectroscopy, which increases the photoluminescence emission intensity and subsequent photostability. Luminescent relaxation lifetime data present two different decay components, consisting of slow decay emission from the Mn center and a fast decay emission from a defect-related center. The impact of the density of surface defect states upon the emission spectra is discussed.     

In-vitro cytotoxicity evaluation of surface design luminescent lanthanide core/shell nanocrystals

Lanthanide nanocrystals (NCs) are the most promising luminescent materials for bioapplications, but their use is hindered by difficulties in obtaining biocompatible and photoluminescence lanthanide NCs. To solve this problem, a simple and versatile strategy was developed for improving the luminescence efficiency with the hydrophilicity of the lanthanide NCs. In this study, the effects of shell formation on structural, morphological, and optical properties (optical absorption, band-gap energy, excitation, emission, and luminescent decay time) were evaluated. To improve the luminescence efficiency and aqueous dispersion, luminescent core-NCs were encapsulated with inert NaGdF₄ and amorphous silica layers. These surface coating layers significantly improved the luminescence efficiency and dispersion of the core/shell NCs in which the silica surface provides a negatively charged surface to the NCs at physiological pH. Optical properties of these NCs strongly depend on the external change of NCs, demonstrating the impact of coating in improving the luminescence efficiency. The outcomes can be ascribed to the development of surface chemical bonds between core/shell and noncrystalline SiO₂ shell via GdOSi bridges, activating the ‘dormant’ Ce³⁺ and Tb³⁺ ions on the surface of NCs. An intensive emission and good hydrophilic property from the active functional groups in solutions show a great potential for applications such as multi-analyte fluorescent biolabeling, optical biosensing, staining, display, and other optical technologies. The core/shell/SiO₂ NCs showed higher nontoxicity and biocompatibility with respect to the core NCs because of biocompatible silica surface modification, facilitating entry into the living cells. Therefore, this developed synthesis approach might advance the field of biomolecule-based nanotechnology in near future.     

Synthesis and characterization of highly luminescent CdSe-core CdS/Zn0.5Cd0.5S/ZnS multishell nanocrystals

We report on the preparation and structural characterization of CdSe nanocrystals, which are covered by a multishell structure from CdS and ZnS. By using the newly developed successive ion layer adhesion and reaction (SILAR) technique, we could gradually change the shell composition from CdS to ZnS in the radial direction. Because of the stepwise adjustment of the lattice parameters in the radial direction, the resulting nanocrystals show a high crystallinity and are almost perfectly spherical, as was investigated by X-ray diffraction and electron microscopy. Also, due to the radial increase of the respective valence- and conduction-band offsets, the nanocrystals are well electronically passivated. This leads to a high fluorescence quantum yield of 70-85% for the amine terminated multishell particles in organic solvents and a quantum yield of up to 50% for mercapto propionic acid-covered particles in water. Finally, we present experimental results that substantiate the superior photochemical and colloidal stability of the multishell particles.     

Poly(MAA-Mn) for Triple-Layer Structure Synthesis of ZnS/ZnS:Mn/SiO2 Phosphors

Methacrylic acid (MAA) was used as a manganese carrier to prepare ZnS/MAA-Mn particles, and ZnS/ZnS:Mn phosphors were formed from ZnS/MAA-Mn by ion substitution through heat treatment. After silica coating on surface by chemical precipitation method with tetraethyl orthosilicate (TEOS), ZnS/ZnS:Mn/SiO₂ phosphors were prepared successfully as a new core/shell structure compound. The thickness of layers was controlled by adjusting concentrations of manganese (II) acetate (Mn(CH₃COO)₂) and TEOS. Structure, morphology, and composition of prepared phosphors were investigated by X-ray diffraction (XRD), transmission electron microscope (TEM), and X-ray photoelectron spectroscopy (XPS), respectively. Photoluminescence (PL) properties of ZnS with different Mn²⁺ content were analyzed by PL spectrometer. PL emission intensity and PL stability were analyzed for evaluating effects of silica coating and Mn²⁺ activator doping. As a result, the structure of two layers could be observed, and optimum composition of ZnS/ZnS:Mn/SiO₂ structure was also obtained.     

HgI2@CsI core/shell nanoparticles: Synthesis,characterization, and application in photosensors

Due to their excellent characteristics such as carrier transport ability, high electrical conductivity, and mobility, core/shell nanostructure photovoltaic devices have received a lot of interest. In this study, HgI₂@CsI core/shell nanoparticles were synthesized by using two-step pulsed laser ablation in liquid (PLAL) at laser fluences of 12.7 and 33.1 J/cm². The structural and optical properties of the samples were examined using X-ray diffraction (XRD), zeta potential (ZP), energy dispersive X-ray (EDX), transmission electron microscope (TEM), UV–Vis absorption, and photoluminescence spectra. The XRD data conforms to the formation of cubic CsI and tetrahedral and orthorhombic HgI₂. The zeta potential results show that the sample prepared at 33.1 J/cm² has the highest stability. TEM images show the formation of core-shell morphology and the thickness of the shell depends on the laser fluence. UV–Vis results show that the band gap of the core/shell was 3.22 and 3.23 eV for 12.7 and 33.1 J/cm², respectively. The fluorescence spectra show two emission peaks for two laser fluences. The current-voltage characteristics of the HgI₂@CsI/Si heterojunction were measured at dark and illumination, and the maximum On/Off ratio was about 167 for a photodetector prepared at 12.7 J/cm². The figures of merit of the photodetectors, including responsivity, external quantum efficiency, and detectivity, are measured at room temperature. A responsivity as high as 0.7 W/A at 400 nm was obtained for a photodetector fabricated at 12.7 J/cm².     

ZnS:Mn2+/聚苯乙烯核壳及ZnS:Mn2+中空球的制备和光谱性质

ZnS:Mn2+ polystyrene (PS) core-shell structures and ZnS:Mn2+ hollow spheres were prepared by a sonoehemical deposition approach. Transmission electron micrograph (TEM) studies show that the PS surface is covered by a thin shell consisted of ZnS: Mn2+ nanoparticles with an average size of 9 nm. ZnS: Mn2+ hollow spheres were obtained by heating the core-shell particles in air at 500 ℃ to drive off PS. The photoluminescence spectrum for the emission band of Mn2+ peaked at 540 nm, and a 45 nm blue shift compared to that of corresponding bulk sample, was discussed based on the Mn-O octahedral distortion induced by shell structure.     

Hybrid approach to the synthesis of highly luminescent CdTe/ZnS and CdHgTe/ZnS nanocrystals

We report the synthesis of highly luminescent CdTe/ZnS and CdHgTe/ZnS core/shell semiconductor nanocrystals (NCs). A hybrid of two synthesis routes leads to novel nanocrystal compositions and small core/shell sizes (4-5 nm) that emit in the far-red and near-infrared regions. These particles exhibit higher resistance to oxidation and photobleaching, have high quantum yields, and could be used for biological labeling and imaging.     

硫脲表面修饰的ZnS:Cd纳米晶的合成及表征

采用硫脲做为表面修饰剂，合成了硫脲表面修饰的掺杂Cd^2＋的ZnS纳米晶（ZnS：CA／SC（NH2）2），用X射线粉末衍射、透射电子显微镜、红外光谱以及荧光光谱等手段进行了表征．实验结果表明，CA抖掺入了ZnS纳米晶中，硫脲分子中的S原子与该纳米晶表面的金属离子存在配位作用，ZnS：CA／SC（NH2）2纳米晶为分散性较好、平均粒径7nm的球形粒子且具有良好的荧光性质．     

Synthesis of highly luminescent Cd(Se,S) nanocrystals

Highly luminescent semiconductor nanocrystals with graded band gap were synthesized using a hot injection method. The band gap of nanocrystals were controlled by gradual incorporation of sulfur to CdSe nanocrystals by applying severely asymmetric composition of reactants [(Cd)/(Se,S) ? 1]. The maximum emission wavelength of the grown nanocrystals was varied by controlling the concentration ratio of VI group element, i.e. Se and S. A green light was emitted from Cd(Se,S) nanocrystals with [Se]:[S] = 1:3 in the reactant mixture and the maximum quantum yield measured by comparing with Rhodamine 6G was larger than 80%.

     

Designing of luminescent GdPO4:Eu@LaPO4@SiO2 core/shell nanorods: Synthesis,structural and luminescence properties

GdPO₄:Eu³⁺ (core) and GdPO₄:Eu@LaPO₄ (core/shell) nanorods (NRs) were successfully prepared by urea based co-precipitation process at ambient conditions which was followed by coating with amorphous silica shell via the sol-gel chemical route. The role of surface coating on the crystal structure, crystallinity, morphology, solubility, surface chemistry and luminescence properties were well investigated by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, Fourier Transform Infrared (FTIR), UV-Vis, and photoluminescence spectroscopy. XRD pattern revealed highly purified, well-crystalline, single phase-hexagonal-rhabdophane structure of GdPO₄ crystal. The TEM micrographs exhibited highly crystalline and narrow size distributed rod-shaped GdPO₄:Eu³⁺ nanostructures with average width 14–16 nm and typical length 190–220 nm. FTIR spectra revealed characteristic infrared absorption bands of amorphous silica. High absorbance in a visible region of silica modified core/shell/Si NRs in aqueous environment suggests the high solubility along with colloidal stability. The photoluminescence properties were remarkably enhanced after growth of undoped LaPO₄ layers due to the reduction of nonradiative transition rate. The advantages of presented high emission intensity and high solubility of core/shell and core/shell/Si NRs indicated the potential applications in monitoring biological events.     

2D self-organization of core/shell Co(hcp)/Co nanocrystals

In this paper we report the preparation of ordered hexagonal 2D arrays of core/shell Cohcp/CoO nanocrystals. A full structural investigation has been carried out using high-resolution transmission electron microscopy, electron diffraction, and electron energy-loss spectroscopy.     

Encapsulation of ZnS:Mn2+ nanocrystals with diblock copolymers

The encapsulation of the nanocrystalline manganese‐doped zinc sulfide (ZnS:Mn) in poly(styrene‐b‐2vinylpyridine) (PS‐PVP) diblock copolymers is reported. Below the critical micelle concentration in the absence of nanocrystals (NCs), inverse micelles of PS‐PVP were induced by adding ZnS:Mn NCs, the presence of which was confirmed by scanning force microscope and dynamic light scattering. In toluene, a PS‐selective solvent, the less‐soluble PVP blocks preferentially surround the ligand‐coated ZnS:Mn NCs. For PS‐PVP encapsulated ZnS:Mn NCs, the ratio of blue emission to orange emission of ZnS:Mn NCs is dependent on both the concentration of PS‐PVP and the solvent quality. The pyridine of PVP blocks form complexes with the Zn atoms via the nitrogen lone pair and thus the sulfur vacancies are passivated. As a result, the defect‐related blue emission is selectively quenched even when the micelles are not formed. As the concentration of PS‐PVP encapsulating the ZnS:Mn NCs increases, the intensity of blue emission decreases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3227–3233, 2006     

Efficient synthesis of highly luminescent copper indium sulfide-based core/shell nanocrystals with surprisingly long-lived emission

We report an efficient synthesis of copper indium sulfide nanocrystals with strong photoluminescence in the visible to near-infrared. This method can produce gram quantities of material with a chemical yield in excess of 90% with minimal solvent waste. The overgrowth of as-prepared nanocrystals with a few monolayers of CdS or ZnS increases the photoluminescence quantum efficiency to > 80%. On the basis of time-resolved spectroscopic studies of core/shell particles, we conclude that the emission is due to an optical transition that couples a quantized electron state to a localized hole state, which is most likely associated with an internal defect.     

链状Eu(BO_2)_3的合成与发光性能研究

采用固相反应合成出链状结构的稀土硼酸盐Eu(BO2)3发光材料。分别利用XRD、TEM、SAED、EDS和PL等测试技术对产物进行了研究,结果表明:链状结构的Eu(BO2)3属于单斜晶系,空间群为I2/a,直径约10～15nm,长度达几个微米,探讨了链状Eu(BO2)3的生长机理。在395nm紫外光激发下,Eu(BO2)3能发出Eu3+的特征红色荧光,发射主峰位于591nm,归属于5D0→7F1磁偶极跃迁。