激光诱导的亚硝酸与二苯醚的反应机理

355 nm光照下利用瞬态吸收光谱技术进行了有氧、无氧条件下二苯醚与亚硝酸体系的反应机理研究, 考察了其中瞬态物种的衰减行为, 并对其光解产物进行了GC-MS分析. 研究表明, HNO₂在355 nm紫外光的照射下产生的OH自由基和二苯醚反应生成C₁₂H₁₀O-OH 加合物, N₂条件下C₁₂H₁₀O-OH衰减的速率常数为(1.86±0.14)×10⁵ s^－1, 在有氧条件下, C₁₂H₁₀O-OH可转化为C₁₂H₁₀O-OHO₂, 衰减的速率常数为(6.6±0.4)×10⁶ s^－1. N₂条件下最终产物为苯酚、2-羟基二苯醚、4-羟基二苯醚、4-硝基二苯醚.     

氟氯酰与丙烷反应的密度泛函理论研究

应用密度泛函理论(DFT), 对氟氯酰(ClF₃O)引发丙烷(C₃H₈)反应生成C₃H₇自由基或丙醇等产物的机理进行了研究. 在B3PW91/6-311＋＋G(d,p)水平上优化了9个不同反应通道上各驻点物(反应物、中间体、过渡态和产物)的几何构型, 并计算了它们的振动频率和零点振动能. 通过零点能校正计算了各反应路径的活化能, 并应用过渡态理论计算了各反应路径常温下的速率常数k. 计算结果表明: ClF₃O与C₃H₈反应可经过不同路径生成HF, C₃H₇自由基和C1F₂O自由基或C₃H₇OH和ClF₃. 其中, 最可几反应路径为ClF₃O分子的中间位F原子进攻丙烷β位H原子的反应, 活化能仅为7.54 kJ/mol, 速率常数为0.153×10⁶ mol^－1•dm³•s^－1.     

多环芳烃与不饱和自由基氢提取反应类的动力学研究

对2~6个环的多环芳烃的氢提取反应类进行了系统研究, 提取氢原子的不饱和自由基包括丙炔基自由基（C₃H₃）、 烯丙基自由基（C₃H₅）、 丁二烯基自由基（nC₄H₅, iC₄H₅）、 环戊二烯基自由基（C₅H₅）以及苯基自由基（C₆H₅）. 采用M06-2X/cc-pVTZ方法得到了多环芳烃的电子结构信息, 利用过渡态理论并结合Eckart隧道校正, 计算了所有反应在500~2500 K范围内的反应速率常数.考察了多环芳烃的大小、 结构对反应速率常数的影响, 对比了不同氢提取自由基及不同氢提取反应类型的速率常数. 结果表明, 多环芳烃的大小对反应速率常数影响不大, 但是多环芳烃的环结构对反应速率常数影响较大. 将不同的氢提取反应类简化为发生在五元环上的C₅类和发生在六元环上的C₆类两类, 结果表明, C₆类的反应活性高于C₅类. 研究了nC₄H₅, iC₄H₅以及C₆H₅自由基与多环芳烃的氢提取反应, 它们的氢提取反应活性大小顺序为C₆H₅>nC₄H₅>iC₄H₅. 通过对每类典型反应的速率常数取平均值, 总结出相应类型的速率规则, 可用于构建多环芳烃和碳烟机理.     

正离子Gemini表面活性剂/负离子聚电解质相互作用的研究

摘要 采用荧光探针法和电导法研究了正离子偶联表面活性剂(C₁₂H₂₅(CH₃)₂N-(CH₂)₆-N(CH₃)₂C₁₂H₂₅•2Br) (12-6-12• 2Br^－)和带相反电荷聚电解质聚丙烯酸钠(NaPA)的相互作用, 结果表明: 由于静电相互作用, 12-6-12•2Br^－和NaPA之间可以形成类胶束或复合物. 对比十二烷基三甲基溴化铵(DTMAB)与NaPA复配体系的荧光光谱, 发现偶联表面活性剂与NaPA的相互作用强于传统表面活性剂. 此外, 还研究了盐和醇对偶联表面活性剂/聚丙烯酸钠的复配体系微极性的影响, 发现盐和醇对表面活性剂在聚电解质上形成类胶束和复合物的溶解都有一定的促进作用.     

Unusual phase behavior of decane-dodecane mixtures confined in SBA-15:Size effect on binary phase diagram

Phase behavior of normal decane-dodecane(n-C₁₀H₂₂-C₁₂H₂₆,C₁₀-C₁₂) system confined in SBA-15（Santa Barbara Amorphous,pore diameters 3.8,7.8,and 17.2 nm） has been studied by using differential scanning calorimetry.It has been found solid-liquid phase diagram of the C₁₀-C₁₂/SBA-15 system is composed of a straight line（3.8 nm）,a curve（7.8 nm） and a loop line （17.2 nm）.The growth of the phase diagram clearly shows the size effect on phase behavior of binary alkanes.Phase behavior has been compared among the systems C₁₀H₂₂-C₁₂H₂₆/SBA-15,C₁₂H₂₆-C₁₄H₃₀/SBA-15 and C₁₄H₃₀-C₁₆H₃₄/SBA-15.     

阴离子插层镁铝水滑石结构及相互作用的理论研究

采用密度泛函理论(DFT)计算了MgAl-LDHs层板与无机阴离子(F^-、Cl^-、NO₃^-、CO₃^2-、SO₄^2-)和有机阴离子(水杨酸根离子([HO(C₆H₄)COO]^-)、苯甲酸根离子([(C₆H₅)COO]^-)、对二甲氨基苯甲酸根离子([p-(CH₃)₂N(C₆H₄)COO]^-)、十二烷基磺酸根离子[C₁₂H₂₅SO₃]^-、己烷基磺酸根离子[C₆H₁₃SO₃]^-、丙烷基磺酸根离子[C₃H₇SO₃]^-)间的相互作用,获得稳定超分子几何结构及相互作用能。层板主体与客体间存在较强的超分子作用,包括主客体间静电作用和氢键等。主、客体间相互作用能数值大小顺序为CO₃^2- > SO₄^2- > F^-> Cl^-> NO₃^-;[p-(CH₃)₂N(C₆H₄)COO]^-> [(C₆H₅)COO]^-> [HO(C₆H₄)COO]^-和[C₁₂H₂₅SO₃]^-> [C₆H₁₃SO₃]^- > [C₃H₇SO₃]^-。另外,还采用自然键轨道(NBO)计算和分析了LDHs 层板与阴离子间作用机理,从二阶微扰理论计算得到的稳定化能变化趋势与相互作用能数据基本吻合。     

电子转移的外电场效应──苯分子与苯正离子自由基间电子转移的从头算研究

基于半经典电子转移理论,结合量子化学计算,在HF/DZP水平上,研究外电场作用下平行的苯分子-苯正离子自由基体系(C₆H₄)₂⁺的分子内电子转移问题.在给体和受体几何构型优化的基础上,用线性反应坐标确定电子转移过渡态,分别用两态变分方法和基于Koopmans定理的分子轨道跃迁能方法计算电子转移矩阵元V_AB,讨论了V_AB对给体和受体中心距d的指数衰减关系.取中心距为0.6nm,研究了外电场对反应热的影响,计算得到在不同外电场强度下分子内气相电子转移的速率常数k.     

活性氮与碘乙烷反应化学发光研究

在流动余辉装置上, 利用N₂空心阴极放电制备活性氮, 研究了活性氮与碘乙烷(C₂H₅I)反应的化学发光. 在620～820 nm波长范围内观察到了较强的发射光谱, 拟合得到的光谱常数表明它来源于NI(b¹Σ^＋→X³Σ^－)跃迁, 并对35个谱峰进行了振动归属. 最后讨论了活性氮中主要成分与C₂H₅I反应的可能过程, 结合辅助性实验分析表明, 活性氮中的N(²P)与C₂H₅I直接反应很可能产生激发态NI(b¹Σ^＋)自由基. 这是利用化学反应直接产生激发态NI(b¹Σ^＋)的首次报道, 观察到的激发态最高振动能级为v'＝6.     

氧负离子自由基与乙烯反应机理的计算研究

在G3MP2B3理论水平下研究了氧负离子自由基(O^－)与乙烯(C₂H₄)的反应机理. 计算结果表明, O^－与C₂H₄经碰撞快速复合形成离子诱导偶极络合物中间体, 然后经历异构化、解离生成各种产物, 分别对应分子离子异构解离与复合电子剥离反应通道. 通过比较各个反应途径上势垒的相对高度, 发现主要产物通道为复合电子剥离通道, 相应的中性产物主要为c-C₂H₄O; 而分子离子解离通道的通道分支比较小, 其中生成水反应通道相应的阴离子产物主要是CH₂＝C^－. 当前的计算证实了以往实验观察的结论.     

激光烧蚀Al+与乙醇团簇的反应研究

利用激光烧蚀-分子束法对Al等离子体与乙醇团簇的反应进行了研究.飞行时间质谱测得的主要反应产物有Al⁺(C₂H₅OH)_n (n=3～10)与H⁺(C₂H₅OH)_n (n=1～14)团簇正离子和(C₂H₅OH)_n(H₂O)OH^- (n=0～8)团簇负离子.实验发现,烧蚀产生的Al等离子体与脉冲分子束的不同位置反应,对团簇离子的类别、大小及强度分布均产生很大影响.Al等离子体与脉冲分子束的前段反应,主要产生金属-复合物团簇离子Al⁺(C₂H₅OH)_n,且信号较强;Al等离子体与脉冲分子束的中段及后段反应,主要产生质子化团簇离子H⁺(C₂H₅OH)_n和团簇负离子(C₂H₅OH)_n(H₂O)OH^-,同时还出现强度较小的其他水合团簇离子,如H⁺(H₂O)m(C₂H₅OH)_n (m=1～2)等.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.