Methylation of 2-methylnaphthalene over metal-impregnated mesoporous MCM-41 for the synthesis of 2,6-triad dimethylnaphthalene isomers

Research on Chemical Intermediates - 2,6-Dimethylnaphthalene (2,6-DMN) is one of the key intermediates for the production of polyethylene naphthalate (PEN), which demonstrates superior properties...     

Photoluminescence study of mesoporous MCM-41 and Ti-grafted MCM-41

Photoluminescence combined with diffuse reflectance UV—Vis spectroscopy was used to characterise both the pure siliceous MCM-41 and Ti-MCM-41 containing tetrahedral Ti(IV) species anchored onto the inner walls of the siliceous MCM-41. Both Ti-MCM-41 and MCM-41 showed complex photoemission signals and this study allows, for the first time, the distinction of the emission signals of tetrahedral Ti9IV) ions from those due to silica surface centres.     

Titania nanoparticles synthesis in mesoporous molecular sieve MCM-41

Nanocrystalline titanium oxide (TiO(2)) is one of the most useful oxide material, because of its widespread applications in photocatalysis, solar energy conversion, sensors and optoelectronics. The control of particle size and monodispersity of TiO(2) nanoparticles is a challenging task. The use of MCM-41, an inorganic template of uniform pore size (2-10 nm), can overcome this difficulty and produce stable nanoparticles of uniform size and shape. Here, we demonstrate the synthesis of titania nanoparticles inside the pores of silica based MCM-41 forming a TiO(2)/Si-MCM composite. Composites are formed in the alcoholic medium by incipient wetness impregnation method. Titania particles of average 3 nm size are obtained. Effect of silica and titania precursors on the quality of nanoparticles has been investigated. The characterization of titania-MCM-41 composites has been carried out using a variety of techniques like UV-vis absorption spectroscopy, X-ray diffraction, FT-IR spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy and photoluminescence spectroscopy. It has been found that the titania particles are co-ordinated with Si-MCM by SiOTi covalent bond.     

Novel coassembly route to Cu-SiO2 MCM-41-like mesoporous materials

A series of mesostructured Cu-SiO2 composites have been synthesized with sodium metasilicate (Na2SiO3) and cuprammonia nitrate (Cu(NH3)4(NO3)2) respectively used as Si and Cu sources. The synthetic procedures were conducted at room temperature, and cetyltrimethylammonia bromide was used as a template. Under our experimental conditions, ordered mesoporous Cu-SiO2 composites could be obtained with a copper content up to 16.8 wt %. Average pore diameters (2.80-3.15 nm), wall thickness (1.30-2.20 nm), and specific surface area (1020-690 m2/g) are found to vary linearly with copper content (0-16.8 wt %). Results of thermal gravimetry-differential thermal analysis reveal the collapse temperature of the order structure starts at approximately 1250 K for mesoporous Cu-SiO2 with 16.8 wt % copper content. As indicated by the outcomes of inductively coupled plasma and X-ray photoelectron spectroscopy studies, copper is mainly incorporated inside the pore wall rather than embedded on the wall surface. Copper species strongly interact with silica, and calcination at high temperatures cannot cause phase separation between silica and copper oxide. Cu status in mesoporous Cu-SiO2 composites is similar to that in copper silicate in neighboring structures. Based on the results, a S+ I- I+ I- mechanism is proposed in which copper entities are surrounded by silicon species during synthesis of the mesostructured composite.     

Catalytic conversions of linalool and linalyl acetate over large-pore zeolites and mesoporous MCM-41

The dehydration, condensation, and isomerization of linalool and linalyl acetate occur over the H-and dealuminated forms of zeolites FAU(Y), BEA, MOR, and OFF and mesoporous aluminosilicate MCM-41 at 373–453 K. The yields of linalool isomerization to geraniol and α-and β-terpineols are low. The use of linalyl acetate enhances isomerization; the highest yields of the products of linalyl acetate rearrangement (geranyl acetate and terpinyl acetate) are achieved over DeAlBEA(277). Dehydration produces various C₁₀H₁₆ terpenic hydrocarbon isomers.     

Sulfonic acid functionalized mesoporous MCM-41 silica as a convenient catalyst for Bisphenol-A synthesis

Sulfonic acid groups anchored to the surface of mesoporous MCM-41 silica have been identified with S K-edge XANES spectra and the material is an efficient catalyst for the liquid phase condensation of phenol with acetone to form Bisphenol-A with high selectivity.     

Epoxidation of cyclohexene on modified Ti-containing mesoporous MCM-41

Ti-MCM-41, B-Ti-MCM-41 and Ti-grafted MCM-41 were synthesized, characterized and studied in the epoxidation of cyclohexene. The synthetic methods and the effect of water in the oxidant are discussed.     

Hydrogenation of naphthalene on noble-metal-containing mesoporous MCM-41 aluminosilicates

Aromatic saturation of oil fractions is a key process in the refining industry due to increasing demand for cleanest distillates with superior performances. In this study, the behavior of different catalysts containing 1 wt.% of noble-metal inside a mesoporous MCM-41 (Si:Al=20) framework was investigated in the hydrogenation of naphthalene, as preliminary step to investigate bimetallic catalysts. While at atmospheric pressure only Rh and Pd showed a low hydrogenation activity, in the tests performed at 6.0 MPa the catalytic activity grew, exhibiting the following order: Pt>RhPd>>>Ru≈Ir. However, all the catalysts required a large H₂ excess, to avoid a decrease in hydrogenation and ring-opening activity, and gave rise to the best performance for a contact time of 6.8 s, favouring at lower values the partial hydrogenation to tetralin and at higher values cracking reactions. Finally, all the catalysts showed low thio-tolerance, with significant deactivation already feeding 100 ppm wt. of dibenzothiophene (DBT), with a partial reversibility only for the Pt-containing catalyst (CAT 3).     

Effective controlled release of captopril by silylation of mesoporous MCM-41.

The release of the water-soluble drug Captopril is controlled by tailoring the surface properties of mesoporous silica via stepwise silylation. The degree of silylation is manipulated by adjusting the initial concentration of silylanizing reagent (trimethylchlorosilane, TMCS). The silylanized and drug-loaded samples are characterized by powder X-ray diffraction, Fourier transform IR spectroscopy, N2 adsorption and desorption, 29Si cross-polarization magic angle spinning NMR spectroscopy, and transmission electron microscopy. The drug-loading amount is correlated to the Brunauer-Emmett-Teller surface area and surface hydrophilicity/hydrophobicity of the mesoporous silica material, while drug release profiles can be controlled by tailoring the surface properties and pore size.     

Selective catalytic reduction of nitrogen monoxide with propene over CuCl/MCM-41 catalysts

Selective catalytic reduction of nitrogen monoxide with propene over two kinds of CuCl/MCM-41 catalysts prepared by a dispersion method has been studied. It was found that CuCl/AlMCM-41 exhibits substantially higher activity over CuCl/SiMCM-41. Characterization of these samples by H₂-TPR, IR and XRD showed that the active copper species were mainly related to Cu²⁺ and Cu⁺ ions in CuCl/AlMCM-41 catalyst.     

Dynamics of the sorption of phosphatidylcholine by mesoporous composites based on MCM-41

The possibility of predicting the breakthrough curves of a phospholipid (PL) during its sorption by mesoporous composites based on MCM-41 using models of the dynamics of sorption that consider the kinetics of adsorption (the Thomas model) and mixed diffusion (the asymptotic model) is demonstrated using phosphatidylcholine (PC) as an example. The effect the kinetic parameters have on the tailing of the sorption front with respect to the mixed diffusion limitation of the sorption of nonpolar biologically active substances (BASes) is shown. It is found that the ordered structure of composite materials based on MCM-41 ensures a high rate of mass transfer and thus little tailing of the sorption front, when compared to sorbents with a lower degree of order (silica gel and polymer materials) during the sorption of a phospholipid under dynamic conditions. Based on calculations of the parameter of pattern Λ under the conditions of the dynamic mode of sorption in mixed diffusion kinetics, it is shown that the sorption of phosphatidylcholine from hexane solutions by mesoporous composites based on MCM-41 allows the sorption chromatographic process to proceed in the most advantageous (quasi-equilibrium) mode.     

Solid-state NMR study of MCM-41-type mesoporous silica nanoparticles

A systematic study of the surface of MCM-41-type mesoporous silica nanoparticles prepared under low surfactant concentration was carried out using high-resolution solid-state nuclear magnetic resonance spectroscopy. The structures and concentrations of various species present during dehydration and rehydration of mesoporous silicas between -25 and 500 degrees C were detailed by employing one-dimensional and two-dimensional (1)H, (13)C, and (29)Si NMR, including (1)H signal intensity measurements, (1)H-(1)H homonuclear correlation experiments (double quantum, exchange, and RFDR), and (1)H-(29)Si heteronuclear correlation NMR. These experiments employed high MAS rates of up to 45 kHz. The study shows that the surfactant (CTAB) was almost completely removed by acid extraction. The residual molecules assumed prone positions along the pores, with the tailgroup being most mobile. The weakly adsorbed water was hydrogen bonded to the silanol groups, all of which were involved in such bonds under ambient humidity. Specific structures involving water and silanol groups were proposed for various stages of thermal treatment, which included dehydration, dehydroxylation, and subsequent rehydration.     

Synthesis of nopol over MCM-41 catalysts

MCM-41 was found to be an active heterogeneous catalyst for the synthesis of nopol by the Prins condensation of beta-pinene and paraformaldehyde, but Sn-MCM-41 in which Sn has been grafted on MCM-41 by chemical vapor deposition is far more active and combines high efficiency and recyclability.     

自制Ti/W-MCM-41介孔分子筛催化制备乳酸戊酯

采用自制的介孔分子筛Ti/W-MCM-41催化乳酸与正戊醇的酯化反应,合成了乳酸正戊酯;利用红外光谱仪分析了催化剂的化学特征,考察了分子筛的WO3质量分数、催化剂用量、醇酸物质的量比、反应时间、催化剂重复使用性能等因素对目标产物酯化率的影响.结果表明,在nSi∶nTi=30∶1,WO3质量分数10%,550℃下焙烧6h条件下制得的催化剂具有良好的催化性能;其催化合成乳酸正戊酯适宜的反应条件为:0.2mol乳酸,催化剂用量0.5g,n(正戊醇)∶n(乳酸)=1.6∶1,反应时间100min,酯化率可达94.4%.该催化剂使用7次酯化率仍可达86.6%.     

Modification of MCM-41 and SBA-15 mesoporous silicas by imidazolium ionic liquids

MCM-41 and SBA-15 mesoporous molecular sieves are modified with imidazolium ionic liquid (IL) via both physical adsorption and covalent grafting. The considerable effect of IL grafting on the porous structure and the particle morphology of mesoporous supports is shown. The pore size of these supports is found to be a key parameter determining the possibility of loading IL into such support materials.     

Synthesis of hollow spherical silica with MCM-41 mesoporous structure

Hollow spherical mesoporous silica was synthesized by using sodium silicate as a precursor and a low concentration of cetyltrimethylammonium bromide (CTAB) (0.154 mol dm^–3). The resulting hollow spherical particles were characterized with scanning electron microcopy (SEM), small-angle X-ray diffraction (SXRD), transmission electron microscopy (TEM), and N₂ gas adsorption and desorption techniques. The results showed that regular spherical mesoporous silica could be obtained only if the molar ratio of propanol to CTAB was in the range of approximately 8:1–9:1. The spherical particles were hollow (inside), and the shell consisted of smaller particles with a pore structure of hexagonal symmetry. With an increase of the molar ratio of propanol to CTAB, the distance (a value) between centers of two adjacent pores increased, and the pore structure of mesoporous silica became less ordered. N₂ adsorption–desorption curves revealed type IV isotherms and H1 hysteresis loops; with an increase of the molar ratio of propanol to CTAB, the pore size with Barrett–Joyner–Halenda (BJH) diameter of the most probable distribution decreased, but the half peak width of the pore size distribution peak increased     

Thermogravimetry applied to characterization of fly ash-based MCM-41 mesoporous materials

The thermogravimetry (TG) was used for characterization of the fly ash (FA)-based MCM-41 mesoporous materials. MCM-41 mesoporous materials were synthesized using silica extracts from different FA. The synthesis of MCM-41 from FA was carried out by the hydrothermal method using the supernatants of coal FA (in the form of sodium silicate) and cationic cetyltrimethylammonium bromide (CTAB) surfactants as the structure-directing agents. On the basis of the data obtained from the TG analysis, thermal behaviour of FA-based MCM-41 mesoporous materials was assessed. This study has established the range of temperatures corresponding to the desorption of water, decomposition of the surfactant and condensation of silanol, thereby making the overall quality assessment of FA-based MCM-41 mesoporous materials.     

Anchoring of 1,8-naphthalimide derivative into mesoporous MCM-41 molecular sieves

The fluorescent dye molecules, 4-piperidine-1,8-naphthalimide, were successfully fixed into the amino modified pore channel of mesoporous MCM-41 type materials by in situ reaction of 4-piperidinyl-1,8-naphthalic anhydride with the amino group. The formation of amide bonds on the pore surface was verified by infrared spectra. The maximum fluorescence emission peak of this hybrid material has a red shift of 13 nm compared to that of a naphthalimide derivative in ethanol solution. Moreover, the fluorescence intensity of dye molecules grafted into Ce-doped MCM-41 is higher than that in pure silica MCM-41. This phenomenon is attributed to the inhibited internal electron transfer from piperidine to naphthalimide groups by Ce⁴⁺, thus improving the fluorescence intensity of the naphthalimide group. The unique fluorescence behavior of the 1,8-naphthalimide derivative doped hybrid mesoporous material makes it a good candidate for the metal ions microdetection.     

Formation at low surfactant concentrations and characterization of mesoporous MCM-41

At low concentrations of cetyltrimethylammonium bromide,all silica-based mesoporous materials with hexagonal phase have been synthesized via interactions between self-assembled surfactant molecule aggregates and aniomc silicate polymers.The resulting materials are characterized by XRD,FT-IR,solid state 29Si MAS NMR,thermal analysis and N2 adsorption-desorption measurements.After soluble ions are removed,the interactors between surfactant micelles and silicate polymers are reorganized and then form mesostructures 1 he hexagonal framework is sonsistent with amorphous silica gel.The structures of materials depend on the synthesis conditions Hydrothermal process improves the interactions between molecules and increases the degree of framework silicon atom polymerization The.surface area and the mesopore volume of the material prepared at 100℃ increase by 87% and 71 %,respectively,compared with those obtained at room temperature.