Hydrothermal synthesis and characterization of In<Superscript>3+</Superscript> modified BiVO<Subscript>4</Subscript> nanoparticles with enhanced photocatalytic activity

In³⁺-doped BiVO₄ nanoparticles with enhanced visible light activity have been successfully synthesized by a hydrothermal method. The synthesized materials were characterized by X-ray diffraction, Raman, X-ray photoelectron spectroscopy, scanning electron microscopy, BET surface areas analysis, and ultraviolet–visible diffuse reflectance spectra. In comparison with pure BiVO₄, the In³⁺-doped BiVO₄ displayed greater photocatalytic activity in the degradation of methyl blue under visible light illumination. All samples possessed a single monoclinic structure. The introduction of In ions resulted in structural distortion and the decreased band gap energy, producing more electrons and holes for photocatalytic reaction. In the meantime, the doping In ions entails a red shift in the absorption edge and an increase in the intensity of light absorption. The best photocatalytic performance was obtained with the BiVO₄ sample containing 5.0 mol% In ions.     

Concurrent synthesis of SnO/SnO<Subscript>2</Subscript> nanocomposites and their enhanced photocatalytic activity

The SnO/SnO₂ nanocomposites were synthesized using semisolvothermal reaction technique. These nanocomposites were prepared using different combination of solvents viz., ethanol, water, and ethylene glycol at 180 °C for 24 h. The synthesized nanocomposites were analyzed with various characterization techniques. Structural analysis indicates the formation of tetragonal phase of SnO₂ for the sample prepared in ethanol, whereas for other solvent combinations, the mixture of SnO and SnO₂ having tetragonal crystal structures were observed. The optical study shows enhanced absorbance in the visible region for all the prepared SnO/SnO₂ nanocomposites. The observed band gap was found to be in the range of 3.0 to 3.25 eV. Microstructural determinations confirm the formation of nanostructures having spherical as well as rod-like morphology. The size of nanoparticles in ethanol-mediated solvent was found to be in the range of 5 to 7 nm. Thermogravimetric analysis indicate the weight gain around 1.3 wt% confirming the conversion of SnO to SnO₂ material. The photocatalytic activity of synthesized nanocomposites was evaluated by following the aqueous methylene blue (MB) degradation. The sample prepared in ethylene glycol-mediated solvent showed highest photoactivity having apparent rate constant (K_app) 0.62 × 10^?2 min^?1.     

Hydrothermal synthesis,characterization, and photocatalytic performance of W-doped MoO<Subscript>3</Subscript> nanobelts

Orthorhombic MoO₃ and W-doped MoO₃ nanobelts were successfully synthesized by a hydrothermal method. The effect of W dopant on the photocatalytic performance of W-doped MoO₃ nanobelts was studied. The phase, morphology, and oxidation state of the products were characterized by X-ray diffraction analysis, Fourier-transform infrared and Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. In this research, MoO₃ and W-doped MoO₃ exhibited the same phase and morphology of orthorhombic nanobelts with growth along the [001] direction, including detection of Mo⁶⁺, O^2?, and W⁶⁺ in the 3 mol% W-doped MoO₃ sample. The photocatalytic performance of the as-synthesized MoO₃ and W-doped MoO₃ nanobelts was monitored through photodegradation of methylene blue (MB) under visible radiation. W-doped MoO₃ nanobelts showed better photocatalytic performance than pure MoO₃. The 3 mol% W-doped MoO₃ photocatalyst exhibited very good visible-light-driven activity for photodegradation of MB, as high as 99 % within 60 min.     

Hydrothermal synthesis,structure and photocatalytic property of nano-TiO<Subscript>2</Subscript>-MnO<Subscript>2</Subscript>

TiCl₄ and MnSO₄· H₂O as raw materials are hydrolyzed stiochiometrically, following the intermediate of oxide hydrating reacts at 150°C, 0.5 MPa in high-pressure reactor, after filtering, washing and drying, nanometric TiO₂-MnO₂ (Ti_1-X Mn _X O₂) is prepared. The effects of the reaction temperature and time on nanometric TiO₂-MnO₂ are also discussed. XRD shows that the product is TiO₂-MnO₂ with amorphous phase. After being sintered at above 780 °C, it transfers into Ti_1-X Mn _X O₂ with a rutile structure. TEM shows that TiO₂-MnO₂ is the spherical particle. And the average diameter of the particles is 20 nm. The optical absorbance was determined by UV-265 spectrophotometer after dispersing the sample in the mixture of water and glycerol with the ratio of 1 : 1 equably. It is found that the nano-material possesses the advantages of both nano-TiO₂ and nano-MnO₂, and it has strong absorption in the UV and visible region. Photodegradation of dyes in an aqueous solution is investigated using nanometricTiO₂-MnO₂ as a photocatalyst. The results show that after 60 min illumination, the decolorization rate of the acidic red B and acidic black 234 dye can be as high as 100%.     

Fabrication of noble-metal-free NiS<Subscript>2</Subscript>/g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> hybrid photocatalysts with visible light-responsive photocatalytic activities

Nanocomposites of NiS₂ with graphitic carbon nitride (NiS₂/g-C₃N₄) have been successfully synthesized by means of a facile hydrothermal method. The photocatalytic activities of as-prepared samples were evaluated by monitoring the photodecomposition of rhodamine B under visible light irradiation. The experimental results indicated that visible light-driven NiS₂/g-C₃N₄ composites exhibited an enhanced photocatalytic activity compared to that of pure NiS₂, due to the fast generation, separation and transportation of the photogenerated carriers resulting from the addition of NiS₂ nanoparticles (NPs). Interestingly, different amounts of NiS₂ deposition can affect the photocatalytic activities of the NiS₂/g-C₃N₄ composites. A suitable loading amount of NiS₂ NPs presents the best photodegradation performance. The photocatalytic reaction mechanism for the improved photocatalytic performance of NiS₂/g-C₃N₄ catalyst was proposed which was supported by PL, PEC, EIS and active species trapping results. A promising strategy presented here provides a facile route towards the development of economical, noble metal-free composites as photocatalysts for the applications in environmental remediation.     

TiO<Subscript>2</Subscript>/WO<Subscript>3</Subscript> photoanodes with enhanced photocatalytic activity for air treatment in a polymer electrolyte cell

The application of electrochemically enhanced photocatalysis in air treatment using a Nafion-based photoelectrochemical cell and TiO₂/WO₃ photoanodes for organic vapor photooxidation under both UV and visible light irradiation is briefly presented. In that direction, the obtained results regarding the preparation and characterization of the TiO₂/WO₃ photoanodes with enhanced photocatalytic activity are reviewed. Particular emphasis is given in the comparison of the photocatalytic behavior of bilayer TiO₂/WO₃ coatings, electrosynthesized on stainless steel mesh and powder C + mixed (WO₃ + TiO₂) photoanodes. The advantages of using a high surface area C + mixed (WO₃ + TiO₂) powder catalysts as photoanodes against their plain TiO₂ + C and WO₃ + C analogues are discussed.     

Ag<Subscript>3</Subscript>PO<Subscript>4</Subscript>/Bi<Subscript>2</Subscript>MoO<Subscript>6</Subscript> heterostructures with enhanced visible light photocatalytic activity for the degradation of rhodamine B

Highly efficient visible-light-driven Ag₃PO₄/Bi₂MoO₆ hybrid photocatalysts with different mole ratios of Ag₃PO₄ were prepared via sonochemical method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that product are cubic Ag₃PO₄ nanoparticles supported on orthorhombic Bi₂MoO₆ nanoplates. Under visible light irradiation (>420 nm), the Ag₃PO₄/Bi₂MoO₆ photocatalysts displayed the higher photocatalytic activity than pure Bi₂MoO₆ for the decolorization of rhodamine B (RhB). Among the hybrid photocatalysts, 10% Ag₃PO₄/Bi₂MoO₆ exhibited the highest photocatalytic activity for the decolorization of RhB due to the efficient separation of electron–hole pairs.     

Flower-like Au/Ag/TiO<Subscript>2</Subscript> nanocomposites with enhanced photocatalytic efficiency under visible light irradiation

Uniform flower-like TiO₂ coated Au nanostars and core-shell Au@Ag nanostars with different amounts of Ag coating were prepared through a facile method by hydrolysis of TiF₄ under an acidic environment. The photocatalytic capability of these flower-like nanocomposites under visible light irradiation was found to be enhanced by up to 4.7-fold compared to commercial P25 TiO₂ nanoparticles. The enhanced photocatalytic activity was ascribed to improved light absorption and hot electron injection from the photo-excited Au@Ag core to the TiO₂ shell.     

Novel La-doped Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> photocatalysts with enhanced visible-light photocatalytic activity

Novel La-doped Bi₂WO₆ composites were successfully prepared via a facile solvothermal method and well characterized by X-ray diffraction, Brunner?Emmet?Teller measurements, scanning electron microscopy, transmission electron microscopy/high-resolution, energy dispersive spectrometry, X-ray photoelectron spectroscopy, ultraviolet–visible spectroscopy, and Fourier transform infrared spectroscopy. The photocatalytic activity of modified catalysts was evaluated by degrading tetracycline hydrochloride under visible light (450?W Xe lamp irradiation). It was found 5%La-Bi₂WO₆ had the highest light-absorption ability, great morphology, and microstructures. The La dopant enlarged surface area and increased crystal defects, which may enhance the optical absorption activity and inhibit the recombination of the photo-generated charge carrier, respectively. After 150?min illumination, the photocatalysts that 5%La-Bi₂WO₆ and pure Bi₂WO₆ exhibited the best and worst photocatalytic performance, respectively (96.25% vs. 88.92%).

Open image in new window

     

Preparation of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> and N co-doped TiO<Subscript>2</Subscript> photocatalysts and their enhanced photocatalytic activities under visible light

Niobium pentaoxide (Nb₂O₅) and nitrogen co-doped TiO₂ photocatalysts were prepared by mechanical alloying with Nb₂O₅, TiO₂ and urea as raw materials. The pure TiO₂ powders of Degussa P25 were chosen as precursor. Chemical and physical properties of the Nb₂O₅ and N co-doped TiO₂ photocatalysts were investigated, including XRD patterns, XPS spectra, DRS spectra, FT-IR spectra and N₂ adsorption-desorption isotherms. Experiments on photodegradation of methylene blue (MB) and sulfosalicylic acid (SSA) under visible light were carried out to evaluate the photoactivities of the prepared samples, and the chemical oxygen demand (COD) analysis was also conducted as a comparison.     

Nanosized TiO<Subscript>2</Subscript> particles decorated on SiO<Subscript>2</Subscript> spheres (TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript>): synthesis and photocatalytic activities

Nanosized TiO₂ and nano-anatase TiO₂ decorated on SiO₂ spherical core shells were synthesized by using a sol–gel method. The synthesized pure TiO₂ nano particle and TiO₂ grafted on SiO₂ sphere with various ratios have been characterized for their structure and morphologies by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrophotometry (FTIR) and transmission electron microscopy (TEM). Their surface areas were measured using the BET method. The photocatalytic activity of all nanocomposites was investigated using methylene blue as a model pollutant. The synthesized TiO₂/SiO₂ particles appeared to be more efficient in the degradation of methylene blue pollutant, as compared to pure TiO₂ particles.     

Hydrothermal synthesis and thermodynamic properties of 2CaO·3B<Subscript>2</Subscript>O<Subscript>3</Subscript>·H<Subscript>2</Subscript>O

2CaO·3B₂O₃·H₂O which has non-linear optical (NLO) property was synthesized under hydrothermal condition and identified by XRD, FTIR and TG as well as by chemical analysis. The molar enthalpy of solution of 2CaO·3B₂O₃·H₂O in HCl·54.572H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HCl·54.501H₂O and of CaO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5733.7±5.2) kJ mol⁻¹ of 2CaO·3B₂O₃·H₂O was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

Hydrothermal synthesis of nanosized and amorphous alumina in the ZrO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

The reciprocal influence of components on the chemical and structural transformations in the ZrO₂-Al₂O₃-H₂O system during nanoparticle formation under hydrothermal conditions is considered. The possibility of formation of amorphous aluminum oxide under hydrothermal conditions is found as a result of the influence of zirconia nanoparticles on the crystallization.     

Hydrothermal synthesis,characterization, and thermal properties of alumino silicate azide sodalite,Na<Subscript>8</Subscript>[AlSiO<Subscript>4</Subscript>]<Subscript>6</Subscript>(N<Subscript>3</Subscript>)<Subscript>2</Subscript>

First time we report the synthesis, structural characterization and thermal behavior of an unusual N₃ ^? containing alumino-silicate sodalite mineral. Azide sodalite, Na₈[AlSiO₄]₆(N₃)₂ has been synthesized under hydrothermal conditions at 433 K in steel lined Teflon autoclave. The structural and microstructural properties of azide sodalite mineral was characterized by various methods including FT-IR, XRD, SEM, TGA, and MAS NMR. Crystal structure have been refined by Rietveld method in \(P\bar 43n\) space group, indicating that the N₃ ^? sodalite has cubic in lattice. High temperature study was carried out to see the effect of thermal expansion on cell dimension (a ^o) of azide sodalite. Thermal behavior of sodalite was also assessed by thermogravimetric method.     

Facile synthesis of core-shell ZnO/Cu<Subscript>2</Subscript>O heterojunction with enhanced visible light-driven photocatalytic performance

As p–n heterojunction photocatalysts usually possess dramatically improved photocatalytic activity than single photocatalysts, a novel ZnO/Cu₂O heterojunction was designed by a facile self-templating method in this study. The crystal structure, chemical composition, surface morphology, and optical property of ZnO/Cu₂O heterojunction were investigated to clarify the structure-property correlation. Scanning electron microscope and transmission electron microscope images proved the uniform core-shell submicrospheres of ZnO/Cu₂O, in which a three-dimensional flower-like ZnO core was coated by a shell comprised of Cu₂O nanoparticles. The photoresponse result showed that the band gap of the ZnO/Cu₂O core-shell submicrospheres became narrow, and the absorption edge shifted from the ultraviolet region (380?nm) to the visible region (500?nm) compared with the pure ZnO microflowers. For the degradation of Rhodamine B under visible light, the photocatalytic efficiency of ZnO/Cu₂O submicrospheres reached 96% within 40?min of reaction time, which was 3.8 times higher than that of pure ZnO microflowers and up to 4.5 times than that for pure Cu₂O nanoparticles. The remarkable visible light-driven photocatalytic performance is mainly attributed to the extended photoresponse range and effective separation of the photo-generated electron-hole pairs in the unique heterojunction.

Open image in new window

ZnO/Cu₂O core-shell microspheres for the degradation of RhB under visible light

     

Sol–gel synthesis,characterization and photocatalytic activity of mesoporous TiO<Subscript>2</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3 </Subscript>granules

Mesoporous TiO₂/γ-Al₂O₃ composite granules were prepared by combining sol–gel/oil-drop method, using various titania solution. The product granules can be used as a photocatalyst or adsorbent in moving, fluidized bed reactors. The phase composition and pore structure of the granules can be controlled by calcination temperature and using different titania solution. In the photocatalysis of NH₃ decomposition, TiO₂/γ-Al₂O₃ granules using Degussa P25 powder treated thermally at 450 °C showed the highest catalytic ability. However, TiO₂/γ-Al₂O₃ granules using titania made by hydrothermal method had comparable performance in NH₃ decomposition.     

Hydrothermal synthesis of efficient TiO<Subscript>2</Subscript>-based photocatalysts

We carried out a thorough study of the micromorphology, physicochemical properties, and photocatalytic activity of nanocrystalline anatase powders formed during the hydrothermal treatment of titanyl sulfate solutions of various compositions. A new procedure is proposed for the hydrothermal synthesis of nanocrystalline anatase having specific surface areas of ∼50 m²/g and photocatalytic activities exceeding the activity of the commercially available Degussa P25 formulation.     

Facile ultrasonic-assisted preparation of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag<Subscript>3</Subscript>VO<Subscript>4</Subscript> nanocomposites as magnetically recoverable visible-light-driven photocatalysts with considerable activity

In this work, a facile ultrasonic-assisted method was applied for preparation of Fe₃O₄/Ag₃VO₄ nanocomposites with different compositions. The as-prepared products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive analysis of X-rays, UV–Vis diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy, and vibrating sample magnetometery. Photocatalytic degradation of rhodamine B under visible-light irradiation was investigated, and it was found that weight ratio of Fe₃O₄–Ag₃VO₄ has significant influence on the photocatalytic activity and the nanocomposite with 1:4 weight ratio of Fe₃O₄–Ag₃VO₄ has superior activity. In addition, the nanocomposite showed great activities in degradations of methylene blue and fuchsine, which are comparable with activity of the pure Ag₃VO₄. More importantly, this nanocomposite displayed remarkable saturation magnetization, leading to easily and quickly separation of its suspension from treated system by applying a magnetic field.     

Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>/BiFeO<Subscript>3</Subscript> heterostructure: preparation,characterization, and photocatalytic activity

Bi₂O₃/BiFeO₃ composite was successfully fabricated by a conventional sol–gel method and structural properties were characterized based on X-ray diffractometer, scanning electron microscope, transmission electron microscope, energy-dispersive X-ray analyzer, nitrogen adsorption–desorption measurement, and UV–visible diffuse reflectance spectroscopy. Bi₂O₃/BiFeO₃ had a good absorption for visible light, which was benefit to photocatalytic activity. The highest degradation efficiency was obtained when the content of Bi₂O₃ in Bi₂O₃/BiFeO₃ was 63.9%. Effect of experimental conditions was investigated, and the highest photocatalytic activity of Bi₂O₃/BiFeO₃ was observed at photocatalyst dosage of 0.5 g/L, initial BPA concentration of 10 mg/L, and solution pH of 6.3. Bi₂O₃/BiFeO₃ photocatalyst exhibited enhanced photocatalytic activity for BPA, and the reaction rate constant over Bi₂O₃/BiFeO₃ composite was 2.23, 3.65, and 8.71 times higher than that of BiFeO₃, Bi₂O₃ and commercial TiO₂ (P25), respectively. Bi₂O₃/BiFeO₃ showed high photocatalytic activity after three cycles, suggesting that it was a stable photocatalyst. The possible photocatalytic mechanism has been discussed on the basis of the theoretical calculation and the experimental results. The hydroxyl and superoxide radicals together with photogenerated holes played significant roles in the photocatalytic reaction.