Fe3O4-modified sewage sludge biochar for U(VI) removal from aqueous solution: performance and mechanism

Journal of Radioanalytical and Nuclear Chemistry - Sewage sludge-derived biochar (SSB) was prepared at 600 °C pyrolysis temperature and modified by co-precipitation with Fe3O4 to...     

添加不同塑料与污泥混合热解对生物炭中重金属的影响

利用高温管式炉开展城市污泥（SS）与四种塑料（PE、PP、PS和PVC）混合热解实验,分别得到四种生物炭（SSC_PE、SSC_PP、SSC_PS和SSC_PVC）,研究了生物炭中重金属（Cr、Mn、Ni、Cu、Zn、As、Cd和Pb）含量、残余率、BCR形态和TCLP浸出毒性特征,并开展潜在生态风险评估。结果表明,添加不同塑料与污泥混合热解能够降低除Cd以外重金属的残余率。与污泥单独热解所得生物炭（SSC）相比,添加PE、PP和PS能够促进生物炭中的重金属向相对稳定态（F3+F4）转化,实现固化稳定;添加PVC仅对生物炭中Cr和As有固化稳定作用,对其他重金属有明显活化作用。四种生物炭中的重金属浸出量低于GB5085.3-2007浸出毒性鉴别标准规定的限值,生态风险均明显地降低至轻微风险水平,表明添加PE、PP、PS和PVC与污泥混合热解所得生物炭的应用不会带来新的环境风险,这为污泥与废塑料协同处置工艺提供了良好的理论支撑。     

Thermal analysis of soil amended with sewage sludge and biochar from sewage sludge pyrolysis

The main objective of the present study is to study the behaviour of sewage sludge and biochar from sewage sludge pyrolysis after addition to soil in a context of a temperate agricultural soil. For this, an incubation experiment was designed during 200 days. Carbon mineralization of soil amended with sewage sludge and biochar at two different rates (4 and 8 wt%) was evaluated. Differential thermal analysis, thermogravimetry and the first derivate of the TG were performed in oxidizing conditions on soil samples before and after incubation. Biochar obtained from sewage sludge pyrolysis at 500 °C was more stable in soil than original sewage sludge. After incubation experiment, the reduction of soil organic matter content was significantly lower in soil amended with biochar than in soil amended with sewage sludge. The thermostability index WL₃/WL₂ decreases after incubation in soil amended with biochar, however it increases in case of soil treated with sewage sludge.     

Removal and recovery of uranium from aqueous solution by tea waste

Experiments on the removal and recovery of U(VI) from aqueous solution by tea waste were conducted. The adsorbent was characterized by scanning electron microscope and energy dispersive spectrometer before and after the adsorption treatment. The removal of U(VI) amounts to 86.80?% at optimum pH 6. The adsorption process reaches its equilibrium in 12?h at 308?K, and the kinetic characteristic can be described by the pseudo-second-order kinetic equation. The amount of adsorption increases from 22.92 to 142.21?mg?g^?1 with the decrease of tea waste dosage from 100 to 10?mg for solution with an initial uranium concentration of 50?mg?L^?1. Desorption for the four strippants is higher than 80?%. The equilibrium data are more agreeable with Freundlich isotherm than Langmuir isotherm.     

Copper removal from aqueous solution using biochar: Effect of chemical activation

The main aim of this study was to test the efficiency of biochar for Cu removal from synthetic and soil solutions, respectively.The biochar was produced from brewers draff via pyrolysis. Additionally, the prepared biochar was also activated using 2 M KOH to enhance its sorption efficiency to remove Cu from both solutions. Two different aqueous solutions were prepared for these experiments: (i) a synthetic using Cu-nitrate salt with 0.01 M NaNO₃ and (ii) soil solution obtained from a Cu-contaminated soil using 0.01 M CaCl₂ leaching procedure. Batch sorption and column experiments were used to evaluate the efficiency of both biochar (BC) and activated biochar (BC_act) to remove Cu from the solutions.Results showed that both biochar samples are pure amorphous carbon and the Cu sorption is thus mainly a result of physical sorption on the biochar surface. Next, chemical activation, using 2 M KOH, significantly increased the total volume of all pores in biochar (from 0.01 ± 0.002 to 8.74 ± 0.18 mL g⁻¹). On the other hand, the BET surface area was similar for both sorbents (BC = 9.80 ± 0.62 m² g⁻¹ and BC_act = 11.6 ± 0.4 m² g⁻¹). Results also demonstrate enhanced sorption efficiency of the BC_act (10.3 mg g⁻¹) in comparison with the BC (8.77 mg g⁻¹). Additionally, enhanced Cu removal during column retention test was observed for the BC_act in both synthetic and soil solutions, respectively.In summary, the results showed that biochar prepared from brewers draff was able to remove Cu from both aqueous solutions.     

一种煤与两种城市污水污泥混合热解的热重分析

采用热重分析法对一种煤和两种城市污水污泥（S1和S2）及其混合物进行了热解实验研究,揭示了煤和污泥在氮气中的热解特性及污泥对煤热解特性的影响。煤和污泥的热解特性参数不同,主要表现在总失重率、失重速率及挥发分析出温度区间等。煤与污泥S1混合有助于增加样品的热解总失重率,提高失重速率;污泥S1与煤的挥发分析出区间部分重合,污泥灰中含的无机物对煤的热解起到催化效果;煤和S2污泥混合后热解反应过程中无明显相互作用;煤与城市污水污泥混合物的相互作用与样品特性和混合比例有关。     

Application of sorbent obtained by pyrolysis of sewage sludge for biological treatment of waste water

Applied Biochemistry and Biotechnology - The investigation of the behavior of the waste-water sludge of various chemical enterprises during thermal processing shows that effective carbon-mineral...     

污泥与煤共热解过程中磷元素的挥发规律研究

污泥灰分中磷元素含量明显高于煤,其中主要的晶体态含磷化合物为磷酸铁钙和少量的磷酸铝。利用高频加热反应装置考察了污泥-神府煤混合物快速热解过程中磷元素挥发规律。结果表明,污泥-神府煤混合物热解后磷元素主要存在于热解焦中。磷元素挥发比例随污泥添加比例的增加先升高后降低,随热解温度的升高而增加。热解温度不高于1 100 ℃时,混合物中以有机磷的挥发为主,磷元素挥发比例不高于3.2%。热解温度高于1 200 ℃后无机磷中磷元素挥发明显,1 300 ℃下最高有33.0%的磷元素随热解气体挥发出。     

Thermal analysis of growing media obtained from mixtures of paper mill waste materials and sewage sludge

This study deals with thermal analysis of growing media obtained from mixtures of paper will waste materials (one de-inking paper sludge, HP, and one reject from paper mill producing paper from virgin wood, RT) with sewage sludge. For the growing media formulation, one sewage sludge (L) was mixed with both paper mill waste materials at 10, 20, and 30% in volume. An incubation experiment was designed in order to study their carbon mineralization. Addition of sewage sludge significantly increases the carbon mineralization of growing media based on RT. In case of HP, carbon mineralization increases after addition of sewage sludge in 30% (HP + 30L treatment). Thermogravimetric analysis (TG and DTG) of growing media was performed before and after incubation experiment in order to study the organic matter transformation. The higher the carbon mineralization, the greater the difference between TG curves of samples before and after the incubation. The WL₃/WL₂ ratio increases after incubation of samples as a result of organic matter stabilisation. For HP growing media, the highest value corresponds to HP + 30L whereas HP + 20L, and HP + 10L show similar values. In case of RT, the WL₃/WL₂ index shows a progressive increase with sewage sludge content.     

Phenol removal from aqueous solution by carbon xerogel

Carbon xerogel (CX) was used for phenol adsorption from aqueous solution. CX was synthesized by sol?Cgel polycondensation of resorcinol with formaldehyde using sodium carbonate (Na₂CO₃) as catalyst. Then, it was dried by convective drying technique and pyrolyzed under inert atmosphere. Phenol adsorption kinetics was very fast, what was attributed to the presence of open pore structure. The kinetic studies showed that the adsorption process could be fitted to a pseudo-second-order model and the particle diffusion process is the rate-limiting step of the adsorption. The phenol removal was maximum and unaffected by pH changes when the initial pH of the phenol solution was in the range of 3?C8. The optimum adsorbent dose obtained for phenol adsorption onto CX was 0.075?g/50?cm³ solution. The Langmuir model described the adsorption process better than the Freundlich isotherm model and the monolayer adsorption capacity is 32?mg?g^?1. Among the desorbing solutions used in this study, the most efficient desorbent was EtOH (100?%) which released about 87?% of phenol bound with the CX.     

Study of the pyrolysis liquids obtained from different sewage sludge

Pyrolysis of sewage sludge in fluidized bed to produce bio-oil is under study as a useful way to valorise this waste. Sewage sludge is the waste produced in the wastewater treatment plants. Its composition may change due to the origin and to the non-standardized treatments in the wastewater treatment plants. The pyrolysis of three samples of anaerobically digested sewage sludge obtained from three different urban wastewater treatment plants was studied in this work. The organic and inorganic matter composition, and the volatile and ash content of these sewage sludge samples were different. The influence of these parameters on the pyrolysis product distribution and on some characteristics of these products was studied. It was determined that the ash content of the raw material had an enormous influence on the sewage sludge pyrolysis. An increase in the ash content of the sewage sludge caused an increase in the gas yield and a decrease in the liquid and the solid yield with the operational conditions studied. The increase of the volatile content of the sewage sludge samples caused an increase in the liquid yield. The H₂ proportion was the most influenced non-condensable gas. It increased significantly with the ash content. The viscosity of the pyrolysis oils decreased when the ash content augmented. On the other hand, the water content depended on the organic composition of the sewage sludge samples. The chemical composition of the pyrolysis oils was also affected by the sewage sludge ash content above all the proportion of polyaromatic hydrocarbons and nitrogen-containing aromatic compounds. These compound groups increased with the augment of the sewage sludge ash content. The oxygen-containing aliphatic compounds and the steroids decreased with the ash content, although its proportion in the sewage sludge liquid was also influenced by the organic matter composition of the sewage sludge samples.     

Low-cost reed straw-derived biochar prepared by hydrothermal carbonization for the removal of uranium(VI) from aqueous solution

Journal of Radioanalytical and Nuclear Chemistry - Uranium is the important nuclear fuel and its effective adsorption using low-cost materials is meaningful to environmental protection and...     

Adsorption of uranium from aqueous solution using biochar produced by hydrothermal carbonization

The ability of biochar produced by hydrothermal carbonization (HTC) has been explored for the removal and recovery of uranium from aqueous solutions. The micro-morphology and structure of HTC were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The influences of different experimental parameters such as solution pH, initial concentration, contact time, ionic strength and temperature on adsorption were investigated. The HTC showed the highest uranium sorption capacity at initial pH of 6.0 and contact time of 50 min. Adsorption kinetics was better described by the pseudo-second-order model and adsorption process could be well defined by the Langmuir isotherm. The thermodynamic parameters, △G°(298 K), △H° and △S° were determined to be ?14.4, 36.1 kJ mol^?1 and 169.7 J mol^?1 K^?1, respectively, which demonstrated the sorption process of HTC towards U(VI) was feasible, spontaneous and endothermic in nature. The adsorbed HTC could be effectively regenerated by 0.05 mol/L HCl solution for the removal and recovery of U(VI). Complete removal (99.9 %) of U(VI) from 1.0 L industry wastewater containing 15.0 mg U(VI) ions was possible with 2.0 g HTC.     

Cadmium removal from aqueous solutions by hydroxy-8 quinoleine intercalated bentonite

An Algerian bentonite was purified and modified by intercalation of 8-hydroxyquinolinium ion. These materials were characterized by X-ray diffraction, infrared spectroscopy, and thermal analysis. Comparative batch experiments were performed using bentonite-oxine complex (B-oxine) and sodic bentonite (B-Na) for removing cadmium from aqueous solutions. Kinetics study results of cadmium removal with B-Na and B-oxine fit a pseudo-second-order model. The adsorption isotherm data follow the Langmuir equation in which parameters were calculated. B-oxine has a better cadmium removal capacity (61.35 mg/g) than B-Na (29.41 mg/g). Calculated thermodynamic parameters using the van't Hoff equation showed that the removal process is endothermic with B-oxine and exothermic with B-Na. A mechanism of ion exchange followed by complexation-precipitation is suggested for cadmium removal with B-oxine.     

Biochar derived from waste bamboo shoots for the biosorptive removal of ferrous ions from aqueous solution

With the ongoing global demands for modern commodities, anthropogenic activities by industries and humans have brought a colossal pressure to the natural water bodies. Though numerous scientific interventions or treatment techniques have been proposed, the need for a viable low-cost method has been a quest for many researchers. Adsorption as such has been in the limelight as an effective method in recent times using various feedstock biomass waste. Our present piece of research aims to use the non-edible biomass waste generated from bamboo shoots as a sustainable low-cost biochar adsorbent and examine its efficiency in the removal of ferrous (Fe²⁺) ions from an aqueous solution. The batch adsorption study was conducted and the optimum dose and concentration were found to be 0.2 g and 7 mg L^?1 with the Langmuir isotherm model best describing the experimental data. Furthermore, kinetic study suggests that the overall sorption rate predominantly follows the chemisorption pathway. Multiple studies suggest bamboo is an excellent adsorbent for treating various inorganic & organic contaminants; here we have highlighted the multifaceted applications of waste bamboo shoots as an effective adsorbing material. The obtained results can lead to additional benefits and usage of bamboo shoots (waste) with future research prospects.     

苯胺在碳纳米管上的吸附特征

苯胺是一种重要的有机化工原料,能通过皮肤和呼吸道进入人体而引起中毒,还会严重污染环境。目前,国内外处理含苯胺废水的方法主要有氧化法、萃取法、生化法、吸附法等。本文使用碳纳米管进行液相吸附除去苯胺。     

The removal of pharmaceutical pollutants from aqueous solution by Agro-waste

Pharmaceuticals are a unique class of emerging contaminants owing to their intrinsic ability to induce physiological effects on man and animals at low concentrations. Pharmaceuticals are released into the environment via diverse routes; human and animal wastes are the major sources. The persistence and mode of action of pharmaceuticals in the environment make them a major concern. Among methods available for wastewater treatment, the adsorption technique is found to be effective and easy to operate. The expensive nature of commercial activated carbons, however, created a limitation to the adsorption technique; hence the exploration for low-cost and sustainable adsorbents for the removal of different categories of water contaminants. Agricultural wastes offer such advantages as low-cost, abundance and eco-friendly materials in adsorbent preparation. Herein presented are the category and classes of pharmaceuticals cum the risks associated with pharmaceuticals released into the environment. The chemistry of activated carbon/agro wastes viz-a-viz suitability and potency in adsorption of different pharmaceutical waste removal were reviewed; the benefits associated with agricultural wastes usage in pharmaceutical removal have also been presented. Various challenges, gaps cum research prospects in the current field of discussion are herein presented. This work will serve as a tool for public education and enlightenment, help environmentalists make plans for envisaged threats and serve as a guide for policy makers.     

Thiocyanate removal from aqueous solution by a synthetic hydrotalcite sol

The use of a chloride-containing synthetic hydrotalcite sol (LDHC) as adsorbent to remove thiocyanate from aqueous solution was investigated. LDHC was prepared by coprecipitation and was characterized by HRTEM, particle size, XRD, and FTIR. The experiments showed that LDHC was particularly effective in removing thiocyanate due to its small particle size and high zeta potential. The adsorption of thiocyanate on LDHC was favored when the initial solution pH was in the range 3-10, though the most effective pH range was between 4.0 and 8.0. The adsorption reached equilibrium within 150 min. The interaction between the surface sites of LDHC and thiocyanate ions may be a combination of both anion exchange and surface complexation. The pseudo-second-order model best described the adsorption kinetics of thiocyanate onto LDHC. The equilibrium isotherm showed that the adsorption of thiocyanate on LDHC was consistent with the Langmuir equation and the saturated adsorption capacity of LDHC for thiocyanate was 98.3 mg/g at 20°C. The regenerated LDHC in FeCl(3) solution can be used repeatedly in adsorption-regeneration cycles. The results showed that LDHC can be used as a new adsorbent for thiocyanate removal from aqueous solution because of its high adsorption capacity and rapid adsorption rate.     

Highly efficient removal of diazinon pesticide from aqueous solutions by using coconut shell-modified biochar

This study evaluates the adsorption of diazinon from aqueous solutions onto coconut shell-modified biochar using a batch system. The amount of dosage and initial pH are the main parameters being studied to obtain maximum adsorption capacity of the probe molecules. The carbonized coconut shell biochar (BC1), activated coconut shell biochar (BC2), chemically modified phosphoric acid (BC3) and sodium hydroxide coconut shell biochar (BC4) were prepared and tested as variables in the adsorption experiment. The characteristic of biochar via SEM, EDX and BET analysis revealed the large porous of surface morphology and slight changes in the composition with high surface area (405.97 – 508.07 m²/g) by following the sequence of BC3 > BC2 > BC4. Diazinon removal percentage as high as 98.96% was achieved at pH 7 with BC3 as adsorbent dosing at 5.0 g/L. The high coefficient of determination, R² with a small value of ERRSQ and χ² error analysis present the BC1 (0.9971) and BC2 (0.9999) are best fitted with Freundlich isotherm indicates multilayer sorption onto heterogeneous surface whereby the Langmuir isotherm model is the best fitting is described of monolayer adsorption process onto the homogenous surface of BC3 and BC4. The results indicated the maximum adsorption capacity (q_m) was achieved by BC3 with 10.33 mg/g, followed by BC2 (9.65 mg/g) in accordance to the Langmuir isotherm while Freundlich isotherm showed the highest adsorption capacity (k_F) with 1.73 mg/g (L/mg)^1/n followed by BC4 with 0.63 mg/g (L/mg)^1/n at favorable adsorption isotherm (1 ≤ n ≤ 10). Thus, the results obtained depicted that BC2 and BC3 are highly efficient adsorbents and both exhibit great potential in removing diazinon from aqueous solutions.     

Removal of thorium(IV) from aqueous solution by biosorption onto modified powdered waste sludge: experimental design approach

The biosorption of radioactive Th(IV) ions in the aqueous solutions onto the modified powdered waste sludge (MPWS) has been examined. In this context, the parameters affecting biosorption of Th(IV) from aqueous solutions has been examined by using MPWS biosorbent in Box Behnken statistical experimental design. The structure of MPWS biosorbent was characterized by using SEM and BET techniques. According to the experimental design results, MPWS and Th(IV) concentrations should be kept high to achieve the maximum efficiency in Th(IV) biosorption. On the other hand, MPWS, which is also used as a biosorbent, is an economical, effective and natural biosorbent.