Ammonium metavanadate： A novel catalyst for synthesis of 2-substituted benzimidazole derivatives

Ammonium metavanadate (10 tool%) was found to be a useful catalyst for the synthesis of various 2-substituted aryl benzimidazoles. It was used as an oxidizing agent for the condensation of o-pbenylenediamine with different substituted aryl aldehydes at room temperature in ethanol. The method was proved to be simple, convenient and the product was isolated with good yields (79-91%).     

Ammonia-treated activated carbon as support of Ru-Ba catalyst for ammonia synthesis

Ammonia-treated activated carbon has been studied as a support of Ru-Ba catalyst for ammonia synthesis. It is shown that the introduction of nitrogen leads to a decrease of ammonia synthesis activity for the catalysts with a low Ba/Ru molar ratio, while no significant changes are obtained for the catalysts with a high Ba/Ru molar ratio, confirming that electronegative impurities suppress the activity in ammonia synthesis and consume part of the promoters. This revised version was published online in June 2006 with corrections to the Cover Date.     

Water extract of onion catalyst: An economical green route for the synthesis of 2-substituted and 1,2-disubstituted benzimidazole derivatives with high selectivity

An efficient, environmental friendly and substrate controlled method of synthesis of 2-substituted benzimidazole derivatives 3 and 1,2-disubstituted benzimidazole derivatives 4 with high selectivity has been achieved from the reaction of o-phenylenediamine 1 and aldehydes 2 in the presence of water extract of onion and selecting suitable reaction medium. This method is widely applicable for variety of aldehydes such as aromatic/aliphatic/heterocyclic aldehydes and 1,2-diamines to afford 2-substituted benzimidazole derivatives 3 and 1,2-disubstituted benzimidazole derivatives 4 in good to excellent yields (up to 96%). The developed method of water extract of onion catalysis produced 2-substituted benzimidazoles 3 from aromatic aldehydes having electron-withdrawing groups, whereas aromatic aldehydes bearing electron donating groups selectively furnished 1,2-disubstituted benzimidazole 4 derivatives. The process described here has several advantages of cheap, low energy consumption, commercially available starting materials, operational simplicity and nontoxic catalyst. The use of water extract of onion makes this present methodology green and giving a useful contribution to the existing methods available for the preparation of benzimidazole derivatives. In addition, Hammett correlation of substituent constant (σ) vs percentage (%) yield has been established.     

Nanosized sulfated zirconia as solid acid catalyst for the synthesis of 2-substituted benzimidazoles

The condensation reaction of o-phenylenediamine and arylaldehydes was investigated in the presence of nanosized sulfated zirconia (SO ₄ ^2? -ZrO₂) as the solid acid catalyst. Nanosized SO ₄ ^2? -ZrO₂ was prepared and characterized by the XRD, FT-IR, and SEM techniques. The results confirm good stabilization of the tetragonal phase of zirconia in the presence of sulfate. Reusability experiments showed partial deactivation of the catalyst after each run; good reusability can be achieved after calcinations of the recovered catalyst before its reuse.     

Microwave assisted one pot synthesis of 2-ethylamino benzimidazole,benzoxazole and benzothiazole derivatives

A rapid and efficient one-pot method for the synthesis of 2-ethylamino benzimidazole, benzoxazole, and benzothiazole derivatives has been described. The reaction of o-phenylenediamines or o-aminophenols or 2-mercaptoanilines with EDC.HCl under microwave irradiation afforded the corresponding 2-ethylamino benzimidazole, benzoxazole and benzothiazole derivatives in excellent yields.     

无溶剂微波照射下2－取代苯并咪唑的合成

用PPA作催化剂，在无溶剂微波照射下合成了10种2－取代苯并咪唑，为该类化 合物的合成提供了一种新方法。与常规方法相比，反应时间大大缩短，产率与传统 合成方法相当。     

One-pot synthesis of 2-substituted quinoxalines using K10-montmorillonite as heterogeneous catalyst

An efficient one-pot synthesis of 2-substituted quinoxalines from 1,2-diamines and phenacyl bromides is developed using K10-montmorillonite (K10 clay) as a catalyst at 50 °C in acetonitrile medium. This method offers an easy route for the synthesis of substituted quinoxalines in high yields. A plausible mechanism is proposed in which quinoxalines are formed via dehydration–dehydrohalogenation–cyclization sequence. Further, the K10 clay catalyst is recovered by simple filtration and reused six times without any loss in its catalytic activity.     

The green synthesis of exceptional braided,helical carbon nanotubes and nanospiral platelets made directly from CO2

Helical carbon nanotubes currently cost ~15,000–19,000 USD/kg commercially and are ~10–15 times the price of straight carbon nanotubes of similar dimensions. They have not previously been made from the greenhouse gas CO₂ nor had new variants of the helical morphology been demonstrated. In this study, a novel, inexpensive electrosynthesis of these helical nanocarbon materials from CO₂ is presented. This material may be produced by molten carbon growth conditions that (1) maximize torsional stresses, such as those that may occur during rapid, nucleated carbon reduction, (2) enhance defects that cause formation of heptagonal, rather than the conventional hexagonal building blocks of graphene cylindrical walls, and (3) uniformly control those enhanced defects to repeatedly induce a uniform spiral conformation. These conditions are achieved with at least two of the following experimental conditions: (i) high electrolysis current density, (ii) sp³ defect-inducing agents, such as added oxide, and (iii) controlled concentration of iron added to the electrolyte or cathode. Here, it is shown with SEM, TEM, EDX, XRF, and Raman spectroscopy that a molten controlled electrolyte carbonate synthesis to induce defect formation, and a high rate of electrolysis (0.6 A/cm²) leads to a high yield of helical nanotubes, helical nanofibers, or helical nanoplatelet carbon morphologies.     

Highly active catalyst for vinyl acetate synthesis by modified activated carbon

A new zinc acetate catalyst which was prepared from modified activated carbon exhibited extreme activity towards the synthesis of vinyl acetate.The activated carbon was modified by nitric acid,vitriol and peroxyacetic acid(PAA).The effect on specific area, structure,pH and surface acidity groups of carriers by modification was discussed.Amount of carbonyl and carboxyl groups in activated carbon was increased by peroxyacetic acid treatment.The productivity of the new catalyst was 14.58%higher than that of...     

A new method of synthesis of some 2-aryl and 2-heterocyclic benzimidazole,benzoxazole and benzothiazole derivatives

A new one-step facile method for the synthesis of some benzimidazole, benzoxazole and benzothiazole derivatives is described. The method involves the action of aromatic and heterocyclic selenoamides on some o-phenylenediamine, o-aminophenol and o-aminothiophenol and their derivatives.     

Nanosized magnesium oxide as catalyst for the rapid and green synthesis of substituted 2-amino-2-chromenes

A nanosized magnesium oxide catalyzed three-component condensation reaction of aldehyde, malononitrile, and α-naphthol proceeded rapidly in water-PEG to afford corresponding 2-amino-2-chromenes in high yields at room temperature. The greener protocol was found to be fairly general and the catalyst was reused in subsequent reactions with consistent activity.     

Ni supported on activated carbon as catalyst for flue gas desulfurization

A series of Ni supported on activated carbon are prepared by excessive impregnation and the desulfurization activity is investigated. It has been shown that the activated carbon-supported Ni is an efficient solid catalyst for flue gas desulfurization. The activated carbon treated by HNO3 exhibits high desulfurization activity, and different amounts of loaded-Ni on activated carbon significantly influence the desulfurization activity. The catalysts are studied by X-ray diffraction (XRD) and X-ray photoelectr...     

Nanoporous aluminosilicate catalyst with 3D cage-type porous structure as an efficient catalyst for the synthesis of benzimidazole derivatives

Herein we demonstrate for the first time, the synthesis of benzimidazoles through the coupling of aldehydes with o-phenylenediamine by using highly acidic nanoporous aluminosilicate with 3D structure and cage-type pores as the catalyst. The catalyst resulted in excellent yields in short reaction times presumably due to its high acidity, large pore diameter, high surface area, and cage-type 3D porous structure.     

Novel benzothiazole, benzimidazole and benzoxazole derivatives as potential antitumor agents: synthesis and preliminary in vitro biological evaluation

In a previous hit-to-lead research program targeting anticancer agents, two promising lead compounds, 1a and 1b, were found. However, the poor solubility of 1a and 1b made difficult further in vivo studies. To solve this problem, a lead optimization was conducted through introducing N-methyl-piperazine groups at the 2-position and 6-position. To our delight, the optimized analogue 1d showed comparable antiproliferative activity in vitro with better solubility, compared with 1a. Based on this result, the replacement of the benzothiazole scaffold with benzimidazole and benzoxazole moieties afforded 1f and 1g, whose activities were fundamentally retained. In the preliminary in vitro biological evaluation, the immunofluorescence staining of HCT116 cells indicated that 1d, 1f and 1g led to cytosolic vacuolization which was not induced by 1a at low micromolecular concentrations. These results suggest that these optimized compounds might potentially constitute a novel class of anticancer agents, which merit further studies.     

PTSA catalyzed simple and green synthesis of benzothiazole derivatives in water

Abstract  

p-Toluenesulfonic acid (10 mol%) was found to be an effective and efficient catalyst for the synthesis of 2-substituted benzothiazoles from aromatic aldehydes and 2-aminothiophenol in moderate to excellent yields in water. This method provides a simple and efficient protocol in terms of mild reaction conditions, clean reaction profiles, small quantity of catalyst, and simple workup procedure.     

Fe3O4@SiO2/collagen: An efficient magnetic nanocatalyst for the synthesis of benzimidazole and benzothiazole derivatives

In this project, Fe₃O₄@SiO₂ was synthesized and combined with collagen for the preparation of Fe₃O₄@SiO₂/collagen. It was characterized by FT-IR, ¹H NMR, VSM, XRD, EDX, SEM and TEM. This nanocatalyst has some interesting advantages such as facile synthetic procedure, high catalytic activity, easy separation and acceptable reusability. It was applied as an efficient nanocatalyst in the synthesis of benzimidazole and benzothiazole derivatives. This method offers several advantages including high yields, short reaction times, easy workup process and environmentally benign reaction conditions.     

Evaluation of PANI-Averraoha bilimbi leaves activated carbon nanocomposite for Cd2+ and Pb2+ removal from wastewater

In current investigation, we synthesized new Polyaniline-Averraoha Bilimbi Leaves Activated Carbon (PANI-ABLC) nanocomposites and utilized as cost effectual for the elimination of Cd²⁺ and Pb²⁺ ions from the wastewater. The synthesized nanocomposite was confirmed by Scanning Electron Microscopy (SEM) with Energy Dispersive X-Ray (EDX), Fourier Transform-Infrared (FT-IR) spectroscopy and X-Ray Diffraction (X-RD) techniques. A batch adsorption study carried in wastewater containing different concentrations of Cd²⁺ and Pb²⁺ ions in the temperature range of 303–343 K. The results show that, around 80% of Cd²⁺ and Pb²⁺ ions from the wastewater was successfully isolated by using PANI-ABLC nanocomposite. Attempts were made to fit adsorption to different isotherm models. The PANI-ABLC nanocomposite complied Langmuir adsorption model (R² = 0.999) and pseudo-second order kinetics. Further, maximum adsorption efficiency observed at 0.5 g of Polyaniline-Averraoha bilimbi leaves activated carbon nanocomposites. AC- Impedance Spectroscopy (IS) technique shows that, Polyaniline-Averraoha Bilimbi Leaves Activated Carbon (PANI-ABLC) nanocomposite is suitable for removal of Cd²⁺ and Pb²⁺ ions from the wastewater. AC impedance spectroscopy technique study shows that, the process of adsorption was controlled by charge transfer process.