Preparation of 4-sulfonylcalix[6]arene modified Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> as adsorbent for adsorption of U(VI) from aqueous solution

The 4-sulfonylcalix[6]arene modified Fe₃O₄ (MFS) was characterized by FT-IR, SEM, VSM, TGA, etc., which showed that its saturation magnetization was 64.99 emu g^?1 with the particle size 10–40 nm. The maximum adsorption efficiency by MFS for 2.5 mg L^?1 U(VI) solution amounted to 94.39%, which was higher than that by Fe₃O₄ (65.22%) under its optimum adsorption conditions. The adsorption of MFS and Fe₃O₄ were both followed the pseudo-second order model and the Langmuir isotherm model. The Gibbs free energy change and enthalpy change revealed that the adsorption of U(VI) by MFS was a spontaneous and endothermic process.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/rice husk-based maco-/mesoporous carbon bone nanocomposite as superior high-rate anode for lithium ion battery

Rice husks (RHs), a kind of biowastes, are firstly hydrothermally pretreated by HCl aqueous solution to achieve promising macropores, facilitating subsequently impregnating ferric nitrate and urea aqueous solution, the precursor of Fe₃O₄ nanoparticles. A Fe₃O₄/rice husk-based maco-/mesoporous carbon bone nanocomposite is finally prepared by the high-temperature hydrothermal treatment of the precursor-impregnated pretreated RHs at 600 °C followed by NaOH aqueous solution treatment for dissolving silica and producing mesopores. The macro-/mesopores are able to provide rapid lithium ion-transferring channels and accommodate the volumetric changes of Fe₃O₄ nanoparticles during cycling as well. Besides, the macro-/mesoporous carbon bone can offer rapid electron-transferring channels through directly fluxing electrons between Fe₃O₄ nanoparticles and carbon bone. As a result, this nanocomposite delivers a high initial reversible capacity of 918 mAh g^?1 at 0.2 A g^?1 and a reversible capacity of 681 mAh g^?1 remained after 200 cycles at 1.0 A g^?1. The reversible capacities at high current densities of 5.0 and 10.0 A g^?1 still remain at high values of 463 and 221 mAh g^?1, respectively.     

Facile synthesis of Fe@Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> core-shell nanowires as O<Subscript>2</Subscript> electrode for high-energy Li-O<Subscript>2</Subscript> batteries

Fe@Fe₂O₃ core-shell nanowires were synthesized via the reduction of Fe³⁺ ions by sodium borohydride in an aqueous solution with a subsequent heat treatment to form Fe₂O₃ shell and employed as a cathode catalyst for non aqueous Li-air batteries. The synthesized core-shell nanowires with an average diameter of 50–100 nm manifest superior catalytic activity for oxygen evolution reaction (OER) in Li-O₂ batteries with the charge voltage plateau reduced to ～3.8 V. An outstanding performance of cycling stability was also achieved with a cutoff specific capacity of 1000 milliampere hour per gram over 40 cycles at a current density of 100 mA g^?1. The excellent electrochemical properties of Fe@Fe₂O₃ as an O₂ electrode are ascribed to the high surface area of the nanowires’ structure and high electron conductivity. This study indicates that the resulting iron-containing nanostructures are promising catalyst in Li-O₂ batteries.     

Green fabrication of sandwich-like and dodecahedral C@Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@C as high-performance anode for lithium-ion batteries

Sandwich-structured C@Fe₃O₄@C hybrids with Fe₃O₄ nanoparticles sandwiched between two conductive carbon layers have attracted more and more attention owing to enhanced synergistic effects for lithium-ion storage. In this work, an environment-friendly procedure is developed for the fabrication of sandwich-like C@Fe₃O₄@C dodecahedrons. Zeolitic imidazolate framework (ZIF-8)-derived carbon dodecahedrons (ZIF-C) are used as the carbon matrix, on which iron precursors are homogeneously grown with the assistance of a polyelectrolyte layer. The subsequent polydopamine (PDA) coating and calcination give rise to the formation of sandwiched ZIF-C@Fe₃O₄@C. When being evaluated as the anode material for lithium-ion batteries, the obtained hybrid manifests a high reversible capacity (1194 mAh g^?1 at 0.05 A g^?1), good high-rate behavior (796 mAh g^?1 at 10 A g^?1), and negligible capacity loss after 120 cycles.     

LiMO<Subscript>2</Subscript>@Li<Subscript>2</Subscript>MnO<Subscript>3</Subscript> positive-electrode material for high energy density lithium ion batteries

Li[Ni_1/3Co_1/3Mn_1/3]O₂ (NCM 111) is a promising alternative to LiCoO₂, as it is less expensive, more structurally stable, and has better safety characteristics. However, its capacity of 155 mAh g^?1 is quite low, and cycling at potentials above 4.5 V leads to rapid capacity deterioration. Here, we report a successful synthesis of lithium-rich layered oxides (LLOs) with a core of LiMO₂ (R-3m, M?=?Ni, Co) and a shell of Li₂MnO₃ (C2/m) (the molar ratio of Ni, Co to Mn is the same as that in NCM 111). The core–shell structure of these LLOs was confirmed by XRD, TEM, and XPS. The Rietveld refinement data showed that these LLOs possess less Li⁺/Ni²⁺ cation disorder and stronger M*–O (M*?=?Mn, Co, Ni) bonds than NCM 111. The core–shell material Li_1.15Na_0.5(Ni_1/3Co_1/3)_core(Mn_1/3)_shellO₂ can be cycled to a high upper cutoff potential of 4.7 V, delivers a high discharge capacity of 218 mAh g^?1 at 20 mA g^?1, and retains 90 % of its discharge capacity at 100 mA g^?1 after 90 cycles; thus, the use of this material in lithium ion batteries could substantially increase their energy density.

Open image in new window

Graphical Abstract Average voltage vs. number of cycles for the core–shell and pristine materials at 20 mA g^?1 for 10 cycles followed by 90 cycles at 100 mA g^?1

     

Enhanced electrochemical properties of Li<Subscript>2</Subscript>ZnTi<Subscript>3</Subscript>O<Subscript>8</Subscript>/C nanocomposite synthesized with phenolic resin as carbon source

Li₂ZnTi₃O₈/C nanocomposite has been synthesized using phenolic resin as carbon source in this work. The structure, morphology, and electrochemical properties of the as-prepared Li₂ZnTi₃O₈ samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), Raman spectroscopy (RS), galvanostatic charge–discharge, and AC impedance spectroscopy. SEM images show that Li₂ZnTi₃O₈/C was agglomerated with a primary particle size of ca. 40 nm. TEM images reveal that a homogeneous carbon layer (ca. 5 nm) formed on the surface of Li₂ZnTi₃O₈ particles which is favorable to improve the electronic conductivity and inhibit the growth of Li₂ZnTi₃O₈ during annealing process. The as-prepared Li₂ZnTi₃O₈/C composite with 6.0 wt.% carbon exhibited a high initial discharge capacity of 425 and 159 mAh g^?1 at 0.05 and 5 A g^?1, respectively. At a high current density of 1 A g^?1, 95.5 % of its initial value is obtained after 100 cycles.     

Facile synthesis of single-crystalline Co<Subscript>3</Subscript>O<Subscript>4</Subscript> cubes as high-performance anode for lithium-ion batteries

Transition metal oxides have great potential as anode for lithium-ion batteries (LIBs), owing to their high theoretical capacity and low cost. However, the poor cycling stability and electron conductivity have limited the widely expected application of transition metal oxides. In this work, highly single-crystalline Co₃O₄ cubes with 400 nm in the average side length are successfully synthesized by a facile hydrothermal method. When used as anode for LIBs, the Co₃O₄ single-crystalline cubes exhibit highly stable and substantial discharge capacities of the amount to 877 mA h g^?1 at 200 mA g^?1 after 110 cycles with remarkable capacity retention of 98%, and 576 mA h g^?1 even at a high rate of 2000 mA g^?1. The scalability of the preparation method and the impressive results achieved here demonstrate the potential for the application to the future development of transition metal oxides anodes. These results suggest that the single-crystalline Co₃O₄ is a promising electrode material for the high-performance energy storage devices.     

A simple synthesis of magnetic ammonium 12-molybdophosphate/graphene oxide nanocomposites for rapid separation of Cs<Superscript>+</Superscript> from water

A new nanoadsorbent A/Fe₃O₄/GO (AFG) is developed for eliminating Cs⁺ from water by anchoring Fe₃O₄ nanoparticles onto graphene oxide (GO/Fe₃O₄) and in situ controllable growing nanocrystal of ammonium 12-molybdophosphate (A) on the surface of GO/Fe₃O₄ with a simple procedure at room temperature. AFG shows a high adsorption capacity for Cs⁺ (Q_max?=?82.71 mg g^?1) and fast kinetics (>?88.83% elimination efficiency within only 1 min and reaches the end equilibrium in about 10 min). It presents good selectivity for Cs⁺ in a wide pH range (2.0–10). Furthermore, it can be recovered from water with easily magnetic separation.     

Electrospun Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>/Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript> composite nanofibers for enhanced high-rate lithium ion batteries

Li₄Ti₅O₁₂/Li₂TiO₃ composite nanofibers with the mean diameter of ca. 60 nm have been synthesized via facile electrospinning. When the molar ratio of Li to Ti is 4.8:5, the Li₄Ti₅O₁₂/Li₂TiO₃ composite nanofibers exhibit initial discharge capacity of 216.07 mAh g^?1 at 0.1 C, rate capability of 151 mAh g^?1 after being cycled at 20 C, and cycling stability of 122.93 mAh g^?1 after 1000 cycles at 20 C. Compared with pure Li₄Ti₅O₁₂ nanofibers and Li₂TiO₃ nanofibers, Li₄Ti₅O₁₂/Li₂TiO₃ composite nanofibers show better performance when used as anode materials for lithium ion batteries. The enhanced electrochemical performances are explained by the incorporation of appropriate Li₂TiO₃ which could strengthen the structure stability of the hosted materials and has fast Li⁺-conductor characteristics, and the nanostructure of nanofibers which could offer high specific area between the active materials and electrolyte and shorten diffusion paths for ionic transport and electronic conduction. Our new findings provide an effective synthetic way to produce high-performance Li₄Ti₅O₁₂ anodes for lithium rechargeable batteries.     

Equilibrium isotherms and isosteric heat for CO<Subscript>2</Subscript> adsorption on nanoporous carbons from polymers

Four nanoporous carbons obtained from different polymers: polypyrrole, polyvinylidene fluoride, sulfonated styrene–divinylbenzene resin, and phenol–formaldehyde resin, were investigated as potential adsorbents for carbon dioxide. CO₂ adsorption isotherms measured at eight temperatures between 0 and 60 °C were used to study adsorption properties of these polymer-derived carbons, especially CO₂ uptakes at ambient pressure and different temperatures, working capacity, and isosteric heat of adsorption. The specific surface areas and the volumes of micropores and ultramicropores estimated for these materials by using the density functional theory-based software for pore size analysis ranged from 840 to 1990 m² g^?1, from 0.22 to 1.47 cm³ g^?1, and from 0.18 to 0.64 cm³ g^?1, respectively. The observed differences in the nanoporosity of these carbons had a pronounced effect on the CO₂ adsorption properties. The highest CO₂ uptakes, 6.92 mmol g^?1 (0 °C, 1 atm) and 1.89 mmol g^?1 (60 °C, 1 atm), were obtained for the polypyrrole-derived activated carbon prepared through a single carbonization-KOH activation step. The working capacity for this adsorbent was estimated to be 3.70 mmol g^?1. Depending on the adsorbent, the CO₂ isosteric heats of adsorption varied from 32.9 to 16.3 kJ mol^?1 in 0–2.5 mmol g^?1 range. Overall, the carbons studied showed well-developed microporosity and exceptional CO₂ adsorption, which make them viable candidates for CO₂ capture, and for other adsorption and environmental-related applications.     

Carbon paste electrode modified with Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles and BMI.PF<Subscript>6</Subscript> ionic liquid for determination of estrone by square-wave voltammetry

A carbon paste electrode (CPE) modified with Fe₃O₄ nanoparticles (Fe₃O₄ NP) and the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (IL BMI.PF₆) was employed for the electroanalytical determination of estrone (E1) by square-wave voltammetry (SWV). At the modified electrode, cyclic voltammograms of E1 in B–R buffer (pH 12.0) showed an adsorption-controlled irreversible oxidation peak at around +0.365 V. The anodic current increased by a factor of five times and the peak potential shifted 65 mV to less positive values compared with the unmodified CPE. Under optimized conditions, the calibration curve obtained showed two linear ranges: from 4.0 to 9.0 μmol L^?1 and from 9.0 to 100.0 μmol L^?1. The limits of detection (LOD) and quantification (LOQ) attained were 0.47 and 4.0 μmol L^?1, respectively. The proposed modified electrode was applied to the determination of E1 in pork meat samples. Data provided by the proposed modified electrode were compared with data obtained by UV–vis spectroscopy. The outstanding performance of the electrochemical device indicates that Fe₃O₄ NP and the IL BMI.PF₆ are promising materials for the preparation of chemically modified electrodes for the determination of E1.     

Coralloid and hierarchical Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanostructures used as supercapacitors with good cycling stability

Coralloid and hierarchical Co₃O₄ nanostructures were synthesized by a facile two-step approach composed of room temperature solution-phase synthesis without any surfactant and calcination of precursor. Owing to the unique structural features, the capacitance of Co₃O₄ could reach up to 591 F g^?1 at a current density of 0.5 A g^?1. Especially the cycling stability remained about 97 % after 2000 cycles at a current density of 1 A g^?1. These results demonstrated that the coralloid and hierarchical Co₃O₄ were excellent candidates for electrochemical supercapacitor devices.     

BiFeO<Subscript>3</Subscript>-coated spinel LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> with improved electrochemical performance as cathode materials for lithium-ion batteries

Spinel LiNi_0.5Mn_1.5O₄ cathode material is a promising candidate for next-generation rechargeable lithium-ion batteries. In this work, BiFeO₃-coated LiNi_0.5Mn_1.5O₄ materials were prepared via a wet chemical method and the structure, morphology, and electrochemical performance of the materials were studied. The coating of BiFeO₃ has no significant impact on the crystal structure of LiNi_0.5Mn_1.5O₄. All BiFeO₃-coated LiNi_0.5Mn_1.5O₄ materials exhibit cubic spinel structure with space group of Fd3m. Thin BiFeO₃ layers were successfully coated on the surface of LiNi_0.5Mn_1.5O₄ particles. The coating of 1.0 wt% BiFeO₃ on the surface of LiNi_0.5Mn_1.5O₄ exhibits a considerable enhancement in specific capacity, cyclic stability, and rate performance. The initial discharge capacity of 118.5 mAh g^?1 is obtained for 1.0 wt% BiFeO₃-coated LiNi_0.5Mn_1.5O₄ with very high capacity retention of 89.11% at 0.1 C after 100 cycles. Meanwhile, 1.0 wt% BiFeO₃-coated LiNi_0.5Mn_1.5O₄ electrode shows excellent rate performance with discharge capacities of 117.5, 110.2, 85.8, and 74.8 mAh g^?1 at 1, 2, 5, and 10 C, respectively, which is higher than that of LiNi_0.5Mn_1.5O₄ (97.3, 90, 77.5, and 60.9 mAh g^?1, respectively). The surface coating of BiFeO₃ effectively decreases charge transfer resistance and inhibits side reactions between active materials and electrolyte and thus induces the improved electrochemical performance of LiNi_0.5Mn_1.5O₄ materials.     

Thiol-functionalized Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> microspheres with superparamagnetism and their adsorption properties for Au(III) ion separation

Thiol-functionalized Fe₃O₄/SiO₂ microspheres (Fe₃O₄/SiO₂-SH) with high saturation magnetization (69.3 emu g^–1), superparamagnetism, and good dispersibility have been prepared by an ethylene glycol reduction method in combination with a modified Stöber method. The as-prepared composite magnetic spheres are characterized with fourier transform infrared spectroscopy (FT-IR), zeta potential, X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and superconducting quantum interference magnetometer, and tested in separation of Au(III) ions from aqueous solutions. The data for Au(III) adsorption on Fe₃O₄/SiO₂-SH are analyzed with the Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models, and the pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetics models. The adsorption behaviors of Au(III) on Fe₃O₄/SiO₂-SH follow the Langmuir isotherm model, and the adsorption process conforms to the pseudo-second-order kinetic model. The maximum adsorption capacity of Au(III) on Fe₃O₄/SiO₂-SH is 43.7 mg g^–1. Acetate anions play an important role yet Cu(II) ions have little interference in the adsorption of Au(III) on the adsorbent. A satisfactory recovery percentage of 89.5% is acquired by using an eluent with 1 M thiourea and 5% HCl, although thiols have a high affinity to Au(III) ions based on the hard-soft acid-base (HSAB) theory by Pearson.     

Enhanced electrochemical performance of LiFePO<Subscript>4</Subscript>/C nanocomposites due to in situ formation of Fe<Subscript>2</Subscript>P impurities

We have studied LiFePO₄/C nanocomposites prepared by sol-gel method using lauric acid as a surfactant and calcined at different temperatures between 600 and 900 °C. In addition to the major LiFePO₄ phase, all the samples show a varying amount of in situ Fe₂P impurity phase characterized by x-ray diffraction, magnetic measurements, and Mössbauer spectroscopy. The amount of Fe₂P impurity phase increases with increasing calcination temperature. Of all the samples studied, the LiFePO₄/C sample calcined at 700 °C which contains ～15 wt% Fe₂P shows the least charge transfer resistance and a better electrochemical performance with a discharge capacity of 136 mA h g^?1 at a rate of 1 C, 121 mA h g^?1 at 10 C (～70 % of the theoretical capacity of LiFePO₄), and excellent cycleability. Although further increase in the amount of Fe₂P reduces the overall capacity, frequency-dependent Warburg impedance analyses show that all samples calcined at temperatures ≥700 °C have an order of magnitude higher Li⁺ diffusion coefficient (～1.3?×?10^?13 cm² s^?1) compared to the one calcined at 600 °C, as well as the values reported in literature. This work suggests that controlling the reduction environment and the temperature during the synthesis process can be used to optimize the amount of conducting Fe₂P for obtaining the best capacity for the high power batteries.     

Electrochemical performance of novel Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> glass-ceramic nanocomposites as electrodes for energy storage devices

The novel Li₃V₂(PO₄)₃ glass-ceramic nanocomposites were synthesized and investigated as electrodes for energy storage devices. They were fabricated by heat treatment (HT) of 37.5Li₂O–25V₂O₅–37.5P₂O₅?mol% glass at 450 °C for different times in the air. XRD, SEM, and electrochemical methods were used to study the effect of HT time on the nanostructure and electrochemical performance for Li₃V₂(PO₄)₃ glass-ceramic nanocomposites electrodes. XRD patterns showed forming Li₃V₂(PO₄)₃ NASICON type with monoclinic structure. The crystalline sizes were found to be in the range of 32–56 nm. SEM morphologies exhibited non-uniform grains and changed with variation of HT time. The electrochemical performance of Li₃V₂(PO₄)₃ glass-ceramic nanocomposites was investigated by using galvanostatic charge/discharge methods, cyclic voltammetry, and electrochemical impedance spectroscopy in 1 M H₂SO₄ aqueous electrolyte. The glass-ceramic nanocomposites annealed for 4 h, which had a lower crystalline size, exhibited the best electrochemical performance with a specific capacity of 116.4 F g^?1 at 0.5 A g^?1. Small crystalline size supported the lithium ion mobility in the electrode by decreasing the ion diffusion pathway. Therefore, the Li₃V₂(PO₄)₃ glass-ceramic nanocomposites can be promising candidates for large-scale industrial applications in high-performance energy storage devices.     

Preparation and methane adsorption of two-dimensional carbide Ti<Subscript>2</Subscript>C

Here a novel material for methane adsorption was synthesized and studied, which is a graphene-like two-dimensional (2D) carbide (Ti₂C, a member of MXenes), formed by exfoliating Ti₂AlC powders in a solution of lithium fluoride (LiF) and hydrochloric acid (HCl) at 40 °C for 48 h. Based on first-principles calculation, theoretically perfect Ti₂C with O termination has a specific surface area (SSA) of 671 m² g^?1 and methane storage capacity is 22.9 wt%. Experimentally, 2.85 % exfoliated Ti₂C with mesopores shown methane capacity of 11.58 cm³ (STP: 0 °C, 1 bar) g^?1 (0.82 wt%) under 5 MPa and the SSA was 19.1 m² g^?1. For Ti₂C sample intercalated with NH₃·H₂O, the adsorbed amount was increased to 16.81 cm³ (STP) g^?1 at same temperature. At the temperature of 323 K, the adsorbed amount of as-prepared Ti₂C was increased to 52.76 cm³ (STP) g^?1. For fully exfoliated Ti₂C, the methane capacity was supposed to be 28.8 wt% or 1148 V (STP)v^?1. Ti₂C theoretically has much larger volume methane capacity than current methane storage materials, though its SSA is not very high.     

Layered LiNi<Subscript>0.80</Subscript>Co<Subscript>0.15</Subscript>Al<Subscript>0.05</Subscript>O<Subscript>2</Subscript> as cathode material for hybrid Li<Superscript>+</Superscript>/Na<Superscript>+</Superscript> batteries

LiNi_0.80Co_0.15Al_0.05O₂ (NCA) is explored to be applied in a hybrid Li⁺/Na⁺ battery for the first time. The cell is constructed with NCA as the positive electrode, sodium metal as the negative electrode, and 1 M NaClO₄ solution as the electrolyte. It is found that during electrochemical cycling both Na⁺ and Li⁺ ions are reversibly intercalated into/de-intercalated from NCA crystal lattice. The detailed electrochemical process is systematically investigated by inductively coupled plasma-optical emission spectrometry, ex situ X-ray diffraction, scanning electron microscopy, cyclic voltammetry, galvanostatic cycling, and electrochemical impedance spectroscopy. The NCA cathode can deliver initially a high capacity up to 174 mAh g^?1 and 95% coulombic efficiency under 0.1 C (1 C?=?120 mA g^?1) current rate between 1.5–4.1 V. It also shows excellent rate capability that reaches 92 mAh g^?1 at 10 C. Furthermore, this hybrid battery displays superior long-term cycle life with a capacity retention of 81% after 300 cycles in the voltage range from 2.0 to 4.0 V, offering a promising application in energy storage.     

Natural graphite enhanced the electrochemical performance of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> cathode material for lithium ion batteries

Natural graphite treated by mechanical activation can be directly applied to the preparation of Li₃V₂(PO₄)₃. The carbon-coated Li₃V₂(PO₄)₃ with monoclinic structure was successfully synthesized by using natural graphite as carbon source and reducing agent. The amount of activated graphite is optimized by X-ray diffraction, scanning electron microscope, transmission electron microscope, Raman spectrum, galvanostatic charge/discharge measurements, cyclic voltammetry, and electrochemical impedance spectroscopy tests. Our results show that Li₃V₂(PO₄)₃ (LVP)-10G exhibits the highest initial discharge capacity of 189 mAh g^?1 at 0.1 C and 162.9 mAh g^?1 at 1 C in the voltage range of 3.0–4.8 V. Therefore, natural graphite is a promising carbon source for LVP cathode material in lithium ion batteries.     

A high mass loading electrode based on ultrathin Co<Subscript>3</Subscript>S<Subscript>4</Subscript> nanosheets for high performance supercapacitor

There is a growing need for the electrode with high mass loading of active materials, where both high energy and high power densities are required, in current and near-future applications of supercapacitor. Here, an ultrathin Co₃S₄ nanosheet decorated electrode (denoted as Co₃S₄/NF) with mass loading of 6 mg cm^?2 is successfully fabricated by using highly dispersive Co₃O₄ nanowires on Ni foam (NF) as template. The nanosheets contained lots of about 3～5 nm micropores benefiting for the electrochemical reaction and assembled into a three-dimensional, honeycomb-like network with 0.5～1 μm mesopore structure for promoting specific surface area of electrode. The improved electrochemical performance was achieved, including an excellent cycliability of 10,000 cycles at 10 A g^?1 and large specific capacitances of 2415 and 1152 F g^?1 at 1 and 20 A g^?1, respectively. Impressively, the asymmetric supercapacitor assembled with the activated carbon (AC) and Co₃S₄/NF electrode exhibits a high energy density of 79 Wh kg^?1 at a power density of 151 W kg^?1, a high power density of 3000 W kg^?1 at energy density of 30 Wh kg^?1 and 73 % retention of the initial capacitance after 10,000 charge-discharge cycles at 2 A g^?1. More importantly, the formation process of the ultrathin Co₃S₄ nanosheets upon reaction time is investigated, which is benefited from the gradual infiltration of sulfide ions and the template function of ultrafine Co₃O₄ nanowires in the anion-exchange reaction.

Open image in new window

Graphical abstract The ultrathin 2D Co₃S₄ nanosheets fabricated on 3D Ni foam and the formation process of the ultrathin Co₃S₄ nanosheets upon reaction times has been investigated. At the same time, the Co₃S₄/NF electrode displays an outstanding specific capacitance of 2420 F g^?1 at 1 A g^?1 with high mass loading of 6 mg cm^?2.