一类可纺丝的全芳香热致性液晶共聚酯的合成和表征

利用Higashi芳香聚酯直接缩聚法的原理 ,采用一步混合投料直接缩聚的方法 ,以对羟基苯甲酸(PHB)、间苯二甲酸 (MPA)、4 ,4′ 二羟基二苯酮 (DHBP)和对苯二酚 (HQ)为单体原料 ,合成了全芳香共聚酯 .该合成方法反应条件温和 ,简单易控 ,产物分子量高 .用差热分析 (DSC)、热重分析 (TA)、偏光显微镜 (PLM)、广角X 射线衍射 (WAXD)等测试分析手段对共聚酯的热性能和液晶特性进行了表征 .研究结果表明 ,利用此方法合成所得的聚合物呈明显的向列型热致液晶特性 ,热稳定性高 ,并具有极易成纤的特点 ,有望成为一种可用于纺丝的全芳香热致液晶共聚酯材料     

SYNTHESIS AND CHARACTERIZATION OF THERMOTROPIC COPOLYESTERS AND COPOLY (ESTER-AMIDE)S CONTAINING OXYETHYLENE-ETHER AS THE SPACER

Flexible oxyethylene-ether was introduced into the aromatic copolyesters and copoly(es-ter-amide)s to reduce the melting point of resulting polymers. The melting point was greatlyreduced to 200℃ or even lower in some cases, and the molecular weight was satisfactorilyhigh as reflected by inherent viscosity. The polymers exhibited high thermal stability and goodmechanical properties as determined by TGA and mechanical tests. The copolyester showedbetter crystallinity and liquid crystallinity than corresponding copoly(ester-amide)s with simi-lar monomer composition as reflected by POM observation and WAXD study. The meltingpoints for both copolyesters and copoly (ester-amide)s showed great dependence on the p-acetoxybenzoic acid (PAB) content in monomer composition and reached the lowest valuewhen PAB was 29 mol%.     

拉伸温度对α’-型聚乳酸结构与性能的影响

α’-晶型聚乳酸(PLA)膜被制备和单轴拉伸.通过凝胶渗透色谱仪(GPC)、全反射红外光谱(ATR-IR)、差示扫描量热仪(DSC),X射线衍射(XRD)及Raman光谱等测试技术研究了拉伸温度梯度变化对α’-晶型PLA膜的分子量及其分布、分子链构象、结晶度、晶型转变和取向行为的影响.在恒定拉伸速度与应变下,拉伸温度对PLA膜的应力-应变曲线,特别是屈服强度、拉伸模量产生了较大的影响,其值随拉伸温度的增加而降低.GPC测试结果表明,在不同的温度下拉伸后,PLA会发生一定程度的降解,分子量降低;ATR-IR,XRD,DSC和Raman光谱测试结果表明,在不同的温度下拉伸后α’-型PLA没有发生晶型的转变,即没有由α’-晶体转变为α-或β-晶体.结果表明PLA的结晶度、分子链取向程度强烈依赖于拉伸温度:当拉伸温度低于100℃时,α’-型PLA膜的结晶度与沿着拉伸方向的变形程度随拉伸温度的增加而增加,分子链的高度取向诱导了PLA结晶;当拉伸温度超过100℃后,PLA的分子链沿着拉伸方向上的有序度与结晶度将降低.     

Synthesis and Characterization of Thermotropic Liquid Crystalline Polyesters

Abstract

Synthesis and characterization of polyesters of 4,4′-dihydroxy biphenyl with succinic, adipic, suberic and sebacic acids were carried out. Initially the diacids were converted to the corresponding acid chlorides in dimethyl formamide (DMF). 4,4′-dihydroxy biphenyl was prepared from 4-hydroxy biphenyl by bromination and subsequent hydrolysis. The low molecular weight polyesters were prepared by the condensation of diacid chlorides with 4,4′-dihydroxy biphenyl in DMF at appropriate temperature. All the polymers were characterized by ¹H NMR, FT-IR, DSC and hot stage polarizing microscope. Thermotropic liquid crystalline behaviour was established by high temperature X-ray (HTXRD) at various temperature intervals. It was found that among the four compounds prepared, three of them showed nematic phase liquid crystallinity with the exception of the ester of succinic acid.     

纳米TiO2-TBOT复合催化生物可降解脂肪-芳香族共聚酯合成的研究

以TiCl4为原料,采用溶胶-凝胶法制备了纳米级的TiO2,并用XRD和TEM等手段进行了表征,并以TiO2-TBOT(钛酸四丁酯)为催化剂,1,4-丁二醇、己二酸和对苯二甲酸二甲酯为原料制备了聚己二酸丁二醇酯和对苯二甲酸丁二醇酯的共聚物,对共聚物的相对分子质量、断裂拉伸强度和断裂伸长率进行了测试,以各反应的时间长短、共聚酯的分子量的高低和力学性能对催化剂性能进行了考察.并采用堆肥埋片法,以失重率作为降解性指标,考察了含芳香组分为40%、50%和60%摩尔分数的三种共聚酯的生物降解性.结果表明,纳米TiO2与TBOT的复合催化剂具有良好的催化性能,当TBOT/TiO2比例为1.2时,所制备共聚酯的重均分子量达到82000.在脂肪族聚酯中引入摩尔分数为40%～60%的芳香族组分,所制备的共聚酯具有较好的力学性能和生物降解性;且随着所含芳香组分的增多,生物降解性变差.     

Block copolyesters of poly(pentamethylene p,p′‐bibenzoate) and poly(tetramethylene adipate)

Hydroxy‐terminated poly(pentamethylene p,p′‐bibenzoate) oligomers with different molecular weights were prepared. The poly(pentamethylene p,p′‐bibenzoate) oligomers showed rather high crystallinity, and some of them exhibited a monotropic smectic phase. Block copolyesters with hard segments of poly(pentamethylene p,p′‐bibenzoate) and soft segments of poly(tetramethylene adipate) were prepared by coupling the poly(pentamethylene p,p′‐bibenzoate) oligomer and a poly(tetramethylene adipate)glycol with methylene‐4,4′‐diphenylene diisocyanate in solution. The block copolyesters were characterized by IR, ¹H NMR, differential scanning calorimetry, a polarized microscope, and X‐ray diffraction. The thermal transitions of the block copolyesters were dependent on the composition and the molecular weight of the poly(pentamethylene p,p′‐bibenzoate) oligomer used. The hard segments in the block copolyesters showed no liquid crystallinity and exhibited rather low crystallinity or were even amorphous. The molecular weight of the poly(pentamethylene p,p′‐bibenzoate) oligomer used influences the glass‐transition temperature and crystalline properties of the soft segments in the block copolyesters significantly. The effect on the glass‐transition temperature of the soft segments is described as the difference in miscibility between the hard and soft segments. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2626–2636, 2002     

引入离子基团改善聚苯乙烯和热致液晶聚合物的相容性 Ⅰ热性能和形态

ＤＳＣ和ＳＥＭ研究结果表明聚苯乙烯（ＰＳ）与一种热致液晶聚合物（ＬＣＰ）（ＰＨＢ／ＰＥＴ（６０／４０）共聚酯）完全不相容．共混体系具有与组分无关的Ｔｇ，并且表现出明显的两相结构．将ＰＳ进行化学改性（引入磺酸基团）制备成磺化聚苯乙烯（ＳＰＳ），随中和盐离子的变化有：酸式、Ｌｉ、Ｎａ、Ｚｎ和Ｍｎ盐五种形式．用ＤＳＣ和ＳＥＭ对ＬＣＰ与ＳＰＳ共混物的热性能和形态进行了分析和表征．共混体系有一个与组成相关，且明显低于纯ＳＰＳ的Ｔｇ．这表明了ＰＳ与ＬＣＰ的相容性因为磺酸基团的引入而得到了改善．同时用Ｆｏｘ方程计算了ＬＣＰ的Ｔｇ．当ＳＰＳ含量较低时（不大于５０％）在各个共混体系中，所估算的ＬＣＰ的Ｔｇ相互吻合．表明共混体系满足Ｆｏｘ方程的前提条件，即ＬＣＰ与ＳＰＳ形成相容体系．当ＳＰＳ含量较低时（２５％），ＬＣＰ／ＳＰＳ的共混物为较均一体系，断面光滑；而ＳＰＳ含量较高时，在脆断面可以观察到纳米级的颗粒．电子能谱分析证明了这些颗粒是ＳＰＳ负离子的聚集体．     

Synthesis and formulation of vinyl-containing polyacids for improved light-cured glass-ionomer cements

Vinyl-containing poly(acrylic acid-co-itaconic acid) copolymers were synthesized and used to formulate light-curable cements containing reactive glass fillers (Fuji II LC). The conditions for light curing were studied and optimized. Effects of molecular weight (MW), grafting ratio, comonomer, liquid composition, powder/liquid (P/L) ratio, glass powder and aging were evaluated. The results show that the vinyl-containing glass-ionomer cements (GICs) prepared in this study exhibit higher compressive strength (CS, 225.6 MPa), diametral tensile strength (DTS, 28.4 MPa) and much higher flexural strength (FS, 116.4 MPa), as compared to commercial Fuji II LC GIC (186.6 in CS, 19.1 in DTS and 57.1 in FS). The optimal light-exposure time was found to be around 10 min, and concentrations of CQ and DC were 0.5% (by weight) and 1.0%, respectively. Effects of MW, grafting ratio, P/L ratio and content of polymer in the liquid formulation were significant. The highest strengths were found for the optimal formulations where the MW was 15,000 (weight average), grafting ratio 25 mol%, P/L ratio 2.7 and liquid composition 50:20:30. During aging, the cement showed an increase of strength over the first week and then no change for a month. SEM analysis suggests that more integrated microstructures and smaller glass particles can lead to higher FS and higher polymer content in GICs leads to tough fracture surface and plastic deformation.     

Biodegradable aliphatic/aromatic copolyesters based on terephthalic acid and poly(L-lactic acid): Synthesis, characterization and hydrolytic degradation

<正>Biodegradable aliphatic/aromatic copolyesters,poly(butylene terephthalate-co-lactate)(PBTL) were prepared via direct melt polycondensation of terephthalic acid(TPA),1,4-butanediol(BDO) and poly(L-lactic acid) oligomer(OLLA). The effects of polymerization time and temperature,as well as aliphatic/aromatic moiety ratio on the physical and thermal properties were investigated.The largest molecular weight of the copolyesters was up to 64100 with molecular weight distribution index of 2.09 when the polycondensation was carried out at 230℃for 6 h.DSC,XRD,DMA and TGA analysis clearly indicated that the degree of crystallinity,glass-transition temperature,melting point,decomposition temperature, tensile strength,elongation and Young's modulus were influenced by the ratio between TPA and OLLA in the final copolyesters.Hydrolytic degradation results demonstrated that the incorporation of biodegradable lactate moieties into the aromatic polyester could efficiently improve hydrolytic degradability of the copolymer even though it still had many aromatic units in the main chains.     

Environmental effects in free-radical polymerizations. Part III. Vinyl chloride and n-butyraldehyde

The properties of poly(vinyl chloride) samples prepared by a free-radical process in the presence of n-butyraldehyde have been studied from the point of view of polymer tacticity, branching, molecular weight, and relative crystallinity. The postulate of a polymer radical–aldehyde complex, invoked to explain the increased crystallinity, was tested. The polymers had a lower degree of polymerization and branching than normal, and these parameters rather than increased syndiotacticity were responsible for the high degree of crystallinity. Both molecular weight and branching affect the crystallinity, since polymer samples prepared in the presence of various transfer agents with similar molecular weights were less crystalline than those prepared in aldehyde, but yet more crystalline than high molecular weight bulk polymer. Polymers prepared in aldehyde had a lower degree of branching than those formed in other transfer agents. It was concluded that aldehyde was effective in increasing the crystallinity of poly(vinyl chloride) in these two ways, and so appeared to be unique among the transfer agents. There was no evidence for assuming any complexing between polymer radicals and aldehyde.     

Liquid crystal polymers. IX. Copolyesters of trans-4,4′-stilbenedicarboxylic acid, 1,4-butanediol,and aromatic dicarboxylic acids

Copolyesters of trans-4,4-stilbenedicarboxylic acid (SDA), terephthalic acid, and 1,4-butanediol exhibit thermotropic liquid crystallinity if at least 40 mol % SDA is present (acids total 100 mol %); SDA/2,6-naphthalenedicarboxylic acid/1,4-butanediol copolyesters are liquid crystalline if at least 30 mol % SDA is present. The effects of SDA content on the thermal, rheological, plastic, and fiber properties of the copolyesters were determined. The SDA component increases the relaxation times of the polymers and enables injection-molded plastics and melt-spun fibers to have significantly increased tensile strength and stiffness.     

Synthesis of new 1‐decene‐based LLDPE resins and comparison with the corresponding 1‐octene‐ and 1‐hexene‐based LLDPE resins

This article extends the composition of linear low‐density polyethylene (LLDPE) resins to that containing 1‐decene comonomer units, and examines the effects of comonomer (type and concentration) to copolymerization and physical properties of LLDPE resins. CGC metallocene technology, under high temperature and high pressure (industrial reaction condition), was used to prepare three types of well‐defined LLDPE copolymers containing 1‐hexene, 1‐octene, and 1‐decene units. They show high molecular weight with narrow molecular weight and composition distributions, comparative catalyst activities, and similar comonomer effects. However, 1‐decene seems to exhibit significantly higher comonomer incorporation than 1‐hexene and 1‐octene, which may be associated with its high boiling point, maintaining liquid phase during the polymerization. The resulting LLDPE copolymers show a clear structure–property relationship. Melting temperature and crystallinity of the copolymer are governed by mole % of comonomer. The increase of branch density linearly decreases the LLDPE melting point and exponential reduction of its crystallinity. On the other hand, the density of the copolymer decreases with the increase of comonomer weight %, which shows a sharp linear relationship in the low comonomer content. The tensile properties of 1‐decene‐based LLDPE are very comparative with those of the commercial LLDPE resins with similar compositions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 639–649, 2007     

生物可降解共聚物聚丁二酸/对苯二甲酸丁二醇酯(PBST)的序列结构及结晶性研究

制备了高分子量的聚丁二酸丁二醇酯,并通过与对苯二甲酸二甲酯的无规共聚调节其生物可降解性及力学性能,得到了具有优良机械性能和不同生物降解速度的一系列共聚物,并对共聚物序列结构、热力学性能、结晶性进行了研究.结果表明,该共聚物为无规共聚物,PBS和PBT分别结晶.共聚物的结晶熔点符合无规共聚物的Flory方程.     

Effect of Molecular Weight on the Properties of Poly（butylene succinate）

Poly（butylene succinate） （PBS） with different molecular weight was synthesized from 1, 4-butanediol and succinic acid by direct melt condensation. The synthesized PBS was identified by IH-NMR and FTIR spectrometry. The molecular weight was calculated from the intrinsic viscosity, and its value was between 20000 and 70000. The crystallization behavior and crystal morphology as function of molecular weight were investigated by DSC and PLM, respectively. The mechanical properties and hydrolytic degradation behaviors related with change of molecular weight were also studied in this work. The results demonstrated that the properties of PBS were determined by both molecular weight and crystallization properties （crystallinity as well as crystal morphology）. Our work is important for the design and preparation of PBS with proper molecular weight for its practical application.     

Ester phenyl-as-triazine and ester phenylquinoxaline polymers

A series of new high molecular weight soluble ester phenyl-as-triazine and ester phenyl-quinoxaline polymers were prepared by solution cyclopolycondensation of oxalamidrazone or 3,3′-diaminobenzidine, respectively, with various bis(benzilyl)esters. Ester groups are incorporated within the backbone of the polymer chain and also as pendant groups on the heterocyclic ring. By TGA in air, initial weight losses for the all-aromatic polyester phenyl-as-triazines and polyester phenylquinoxalines began at ca. 350 and 400°C, respectively. Films of ester phenyl-as-triazine and ester phenylquinoxaline polymers exhibited good thermo-oxidative stability after aging in circulating air at 232 and 288°C, respectively. Two phenylquinoxaline model compounds were also prepared.     

Thermotropic homopolyesters. IV. Study of fiber formation

We report a melt spinning and viscosity study of two semiflexible homopolyesters containing both rigid and flexible segments in the repeating unit. Single filaments of the polyesters formed from 4,4′-diacetoxybiphenyl and azelaic acid (PB7) and sebacic acid (PB8), and from 4′-hydroxyphenyl-4-hydroxycinnamate and azelaic acid (C7), were spun at temperatures between 205 and 255°C. The temperature dependence of the Newtonian melt viscosity of PB7 and C7 was investigated, and a range of molecular weights was studied for PB7. The spinning parameters, fiber characteristics, and viscosity-temperature behavior are related to the type of mesophase formed. The mechanical properties of fibers spun from both the nematic and smectic phases of these semiflexible chain polymers were poor. Increasing the polymer molecular weight or extrusion rate only afforded a modest improvement in fiber properties. Most polymers could not be spun at temperatures corresponding to the existence of the single mesophase. Hence the low viscosity typical of the nematic mesophase is not necessarily an advantage in fiber formation from the melt. It appears from these results that this type of polyester does not possess adequate chain extension to develop ultrahigh-modulus properties. The director, which describes the local orientation of molecules within the mesophase, may undergo more frequent variations than is the case for rigid chain polyesters. Mechanisms relevant to flexible polymers may contribute to the development of orientation for this class of nematogenic melts.     

大分子引发剂分子量对接枝聚合物基体的PDLC电光性能的影响

以可逆加成-断裂链转移(RAFT)、引发转移终止(iniferter)活性自由基聚合相结合的方法,用一步法制备了不同分子量的大分子引发剂RAFT-PS-co-PCMSI(MI),并通过紫外光聚合诱导相分离法制备了以接枝聚合物为基体的聚合物分散液晶(PDLC)膜.研究了不同分子量的MI对PDLC的微观形貌,关闭状态透光率,阈值电压,饱和电压以及记忆效应等方面的影响.研究表明,降低PDLC中MI的分子量,会使得液晶微滴粒径增大,阈值电压(Vth)、饱和电压(Vsat)减小,记忆效应、关闭状态透光率升高.     

Studies on thermotropic main chain liquid crystalline segmented polyurethanes I. Synthesis and properties of polyurethanes from high aspect ratio mesogenic diol as chain extender

Thermotropic main chain liquid crystalline polyurethanes were prepared from 4-{[4-(6-hydroxyhexyloxy)phenylimino]methyl}benzoic acid 4-{[4-(6-hydroxyhexyloxy)phenylimino]methyl}phenyl ester (mesogenic diol) and 1,6-hexamethylene di-isocyanate. The effects of partial replacement of the mesogenic diol by 20-50 mol% of poly(tetramethylene oxide)glycol (PTMG) of varying molecular mass (M _n =650, 1000, 2000) on the liquid crystalline properties were studied. Structural characterization was carried out by FTIR spectroscopy and the molecular mass distribution was determined by GPC. Differential scanning calorimetry and hot stage polarizing optical microscopy were used to study the mesomorphic properties. It was observed that the partial replacement of the mesogenic diol by PTMG of varying molecular masses influenced the phase transitions and the occurrence of mesophase textures. When the molecular mass of PTMG was enhanced, a higher content of mesogenic agent was needed to obtain liquid crystalline properties.     

Molecular organization in binary mixtures of derivatives of naphthalenebicarboxylic acid and naphthoylenebenzimidazole with a liquid crystal in two-dimensional layers

Langmuir films of some dichroic dyes, namely derivatives of naphthalenebicarboxylic acid and derivatives of naphthoylenebenzimidazole, as well as of their mixtures with the liquid crystals 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4'-cyano-p-terphenyl (5CT) were prepared. Surface pressure/mean molecular area isotherms were recorded from which some information about the alignment of molecules in a monomolecular layer at an air-water interface could be deduced. It was found that the properties of the monolayer are highly sensitive to the molecular structure of the side groups substituted on the main skeleton of the dye molecule, and to the mixture composition. Moreover, information about the miscibility or the phase separation of the two components in Langmuir films formed from dye/liquid crystal mixtures was obtained by using the excess area criterion and surface pressure rules.     

Studies on thermotropic liquid crystalline elastomers. II. Synthesis and properties of liquid crystalline polyester elastomers

Three series of novel thermotropic liquid crystalline polyester elastomers (TLCPEEs) were prepared by direct polycondensation from terephthalic acid, polyols (M_n = 1000 or 2000), and various diols. The structures and thermal properties of the synthesized TLCPEEs were examined by FTIR spectroscopy, differential scanning calorimetry, thermal optical polarized microscopy, thermogravimetric analysis, and wide-angle x-ray diffraction. The effects of kinds and amount of diols and the molecular weight of polyols on the thermal properties of TLCPEEs were studied. By introducing long flexible spacers (PE-1000 or PE-2000) into the polymer main chain, all polymers showed two-phase morphology under the thermal optical microscopic observation. All of the synthesized polymers, except polymer P1-BPA60 and P2-BPA60, which were prepared from BPA, exhibited thermotropic liquid crystalline properties that were in the smectic phase. © 1995 John Wiley & Sons, Inc.