Mononuclear and dinuclear palladium and nickel complexes of phosphinimine-based tridentate ligands

The tridentate bis-phosphinimine ligands O(1,2-C(6)H(4)N=PPh(3))(2)1, HN(1,2-C(2)H(4)N=PR(3))(2) (R = Ph 2, iPr 3), MeN(1,2-C(2)H(4)N=PPh(3))(2)4 and HN(1,2-C(6)H(4)N=PPh(3))(2)5 were prepared. Employing these ligands, monometallic Pd and Ni complexes O(1,2-C(6)H(4)N=PPh(3))(2)PdCl(2)6, RN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][Cl] (R = H 7, Me 8), [HN(1,2-CH(2)CH(2)N=PiPr(3))(2)PdCl][Cl] 9, [MeN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][PF(6)] 10, [HN(1,2-CH(2)CH(2)N=PPh(3))(2)NiCl(2)] 11, [HN(1,2-CH(2)CH(2)N=PR(3))(2)NiCl][X] (X = Cl, R = iPr 12, X = PF(6), R = Ph 13, iPr 14), and [HN(1,2-C(6)H(4)N=PPh(3))(2)Ni(MeCN)(2)][BF(4)]Cl 15 were prepared and characterized. While the ether-bis-phosphinimine ligand 1 acts in a bidentate fashion to Pd, the amine-bis-phosphinimine ligands 2-5 act in a tridentate fashion, yielding monometallic complexes of varying geometries. In contrast, initial reaction of the amine-bis-phosphinimine ligands with base followed by treatment with NiCl(2)(DME), afforded the amide-bridged bimetallic complexes N(1,2-CH(2)CH(2)N=PR(3))(2)Ni(2)Cl(3) (R = Ph 16, iPr 17) and N(1,2-C(6)H(4)N=PPh(3))(2)Ni(2)Cl(3)18. The precise nature of a number of these complexes were crystallographically characterized.     

Binuclear iron-sulfur complexes with bidentate phosphine ligands as active site models of Fe-hydrogenase and their catalytic proton reduction

The displacement of CO in a few simple Fe(I)-Fe(I) hydrogenase model complexes by bisphosphine ligands Ph2P-(CH2)n-PPh2 [with n = 1 (dppm) or n = 2 (dppe)] is described. The reaction of [{mu-(SCH2)2CH2}Fe2(CO)6] (1) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)6] (2) with dppe gave double butterfly complexes [{mu-(SCH2)2CH2}Fe2(CO)5(Ph2PCH2)]2 (3) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)5(Ph2PCH2)]2 (4), where two Fe2S2 units are linked by the bisphosphine. In addition, an unexpected byproduct, [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)5{Ph2PCH2CH2(Ph2PS)}] (5), was isolated when 2 was used as a substrate, where only one phosphorus atom of dppe is coordinated, while the other has been converted to P=S, presumably by nucleophilic attack on bridging sulfur. By contrast, the reaction of 1 and 2 with dppm under mild conditions gave only complexes [{mu-(SCH2)2CH2}Fe2(CO)5(Ph2PCH2PPh2)] (6) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)5(Ph2PCH2PPh2)] (8), where one ligand coordinated in a monodentate fashion to one Fe2S2 unit. Furthermore, under forcing conditions, the complexes [{mu-(SCH2)2CH2}Fe2(CO)4{mu-(Ph2P)2CH2}] (7) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)4{mu-(Ph2P)2CH2}] (9) were formed, where the phosphine acts as a bidentate ligand, binding to both the iron atoms in the same molecular unit. Electrochemical studies show that the complexes 3, 4, and 9 catalyze the reduction of protons to molecular hydrogen, with 4 electrolyzed already at -1.40 V versus Ag/AgNO3 (-1.0 V vs NHE).     

Orthopalladation of iminophosphoranes: synthesis, structure and study of stability

The reaction of Pd(OAc)(2) with polyfunctional iminophosphoranes Ph(3)P=NCH(2)CO(2)Me (1a), Ph(3)P=NCH(2)C(O)NMe(2) (1b), Ph(3)P=NCH(2)CH(2)SMe (1c) and Ph(3)P=NCH(2)-2-NC(5)H(4) (1d), gives the orthopalladated dinuclear complex [Pd(mu-Cl){C(6)H(4)(PPh(2)=NCH(2)CO(2)Me-kappa-C,N)-2}](2) (2a) and the mononuclear derivatives [PdCl{C(6)H(4)(PPh(2)=NCH(2)CONMe(2)-kappa-C,N,O)-2}] (2b), [PdCl{C(6)H(4)(PPh(2)=NCH(2)CH(2)SMe-kappa-C,N,S)-2}] (2c) and [PdCl{C(6)H(4)(PPh(2)=NCH(2)-2-NC(5)H(4)-kappa-C,N,N)-2}] (2d). The reaction implies the activation of a C-H bond in a phenyl ring of the phosphonium group, this fact being worthy of note due to the strongly deactivating nature of the phosphonium unit. The palladacycle containing the metallated carbon atom is remarkably stable toward the coordination of incoming ligands, while that formed by the iminic N atom and another heteroatom (O, 2a and 2b; S, 2c; N, 2d) is less stable and the resulting complexes can be considered as hemilabile. The X-ray crystal structures of the cyclopalladated [Pd(mu-Cl){C(6)H(4)(PPh(2)=NCH(2)CO(2)Me-kappa-C,N)-2}](2) (2a), [PdCl{C(6)H(4)(PPh(2)=NCH(2)-2-NC(5)H(4)-kappa-C,N,N)-2}] (2d), [Pd{C(6)H(4)(PPh(2)=NCH(2)CONMe(2)-kappa-C,N,O)-2}(NCMe)](ClO(4)) (7b) and [Pd{C(6)H(4)(PPh(2)NCH(2)CONMe(2)-kappa-C,N,O)-2}(py)](ClO(4)) (3b), and the coordination compound cis-[Pd(Cl)(2)(Ph(3)P=NCH(2)CH(2)SMe-kappa-N,S)] (8) are also reported.     

Generation and reactions of ruthenium phosphido complexes [(eta5-C5H5)Ru(PR'3)2(PR2)]: remarkably high phosphorus basicities and applications as ligands for palladium-catalyzed Suzuki cross-coupling reactions

Reactions of [(eta5-C5H5)Ru(PR'3)2(Cl)] with NaBAr(F) [BAr(F)-=B{3,5-[C6H3(CF3)2]}4-; PR'3=PEt3 or 1/2Et2PCH2CH2PEt2) (depe)] and PR2H (R=Ph, a; tBu, b; Cy, c) in C6H5F, or of related cationic Ru(N2) complexes with PR2H in C6H5F, gave the secondary phosphine complexes [(eta5-C5H5)Ru(PR'3)2(PR2H)]+ BAr(F)- (PR'3=PEt3, 3 a-c; 1/2depe, 4 a,b) in 65-91 % yields. Additions of tBuOK (3 a, 4 a; [D6]acetone) or NaN(SiMe3)2 (3 b,c, 4 b; [D8]THF) gave the title complexes [(eta5-C5H5)Ru(PEt3)2(PR2)] (5 a-c) and [(eta5-C5H5)Ru(depe)(PR2)] (6 a,b) in high spectroscopic yields. These complexes were rapidly oxidized in air; with 5 a, [(eta5-C5H5)Ru(PEt3)2{P(=O)Ph2}] was isolated (>99 %). The reaction of 5 a and elemental selenium yielded [(eta5-C5H5)Ru(PEt3)2{P(=Se)Ph2}] (70 %); selenides from 5 c and 6 a were characterized in situ. Competitive deprotonation reactions showed that 5 a is more basic than the rhenium analog [(eta5-C5H5)Re(NO)(PPh3)(PPh2)], and that 6 b is more basic than PtBu3 and P(iPrNCH2CH2)3N. The latter is one of the most basic trivalent phosphorus compounds [pK(a)(acetonitrile) 33.6]. Complexes 5 a-c and 6 b are effective ligands for Pd(OAc)2-catalyzed Suzuki coupling reactions: 6 b gave a catalyst nearly as active as the benchmark organophosphine PtBu3; 5 a, with a less bulky and electron-rich PR2 moiety, gave a less active catalyst. The reaction of 5 a and [(eta3-C3H5)Pd(NCPh)2]+ BF4- gave the bridging phosphido complex [(eta5-C5H5)Ru(PEt3)2(PPh2)Pd(NCPh)(eta3-C3H5)]+ BAr(F)- in approximately 90 % purity. The crystal structure of 4 a is described, as well as substitution reactions of 3 b and 4 b.     

Parahydrogen studies of H2 addition to Ir(I) complexes containing chiral phosphine-thioether ligands: implications for catalysis

Ir(CO)[CpFe{eta5-C5H3(PPh2)CH2SR}]Cl [R = Ph and (t)Bu], containing a kappa2:P,S ligand, undergoes H2 addition across the S-Ir-CO axis under kinetic control to form two distinct diastereoisomeric products, which then rearrange via S dissociation in a process that can be hijacked for useful catalysis, but ultimately form a single diastereoisomer of the thermodynamic product where the hydride ligands are trans to chloride and phosphine.     

Synthesis, structures and reactions of lithium complexes of [(o-RCHC6H4)PPh2=NSiMe3]-(R = H, SiMe3) ligands

N-Trimethylsilyl o-methylphenyldiphenylphosphinimine, (o-MeC6H4)PPh2=NSiMe3 (1), was prepared by reaction of Ph2P(Br)=NSiMe3 with o-methylphenyllithium. Treatment of 1 with LiBun and then Me3SiCl afforded (o-Me3SiCH2C6H4)PPh2=NSiMe3 (2). Lithiations of both 1 and 2 with LiBu(n) in the presence of tmen gave crystalline lithium complexes [Li{CH(R)C6H4(PPh(2=NSiMe3)-.tmen](3, R = H; 4, R = SiMe3). From the mother liquor of 4, traces of the tmen-bridged complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}]2(mu-tmen) (5) were obtained. Reaction of 2 with LiBun in Et2O yielded complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}.OEt2] (6). Reaction of lithiated with Me2SiCl2 in a 2:1 molar ratio afforded dimethylsilyl-bridged compound Me2Si[CH2C6H4(PPh2=NSiMe3)-2]2 (7). Lithiation of 7 with two equivalents of LiBun in Et2O yielded [Li2{(CHC6H4(PPh2=NSiMe3)-2)2SiMe2}.0.5OEt2](8.0.5OEt2). Treatment of 4 with PhCN formed a lithium enamide complex [Li{N(SiMe3)C(Ph)CHC6H4(PPh2=NSiMe3)-2}.tmen] (9). Reaction of two equivalents of 5 with 1,4-dicyanobenzene gave a dilithium complex [{Li(OEt2)2}2(1,4-{C(N(SiMe3)CHC6H4(PPh2=NSiMe3)-2}2C6H4)] (10). All compounds were characterised by NMR spectroscopy and elemental analyses. The structures of compounds 2, 3, 5, 6 and 9 have been determined by single crystal X-ray diffraction techniques.     

Synthesis, structure, and reactivity of palladacycles that contain a chiral rhenium fragment in the backbone: New cyclometalation and catalyst design strategies

The bromocyclopentadienyl complex [(eta5-C5H4Br)Re(CO)3] is converted to racemic [(eta5-C5H4Br)Re(NO)(PPh3)(CH2PPh2)] (1 b) similarly to a published sequence for cyclopentadienyl analogues. Treatment of enantiopure (S)-[(eta5-C5H5)Re(NO)(PPh3)(CH3)] with nBuLi and I2 gives (S)-[(eta5-C5H4I)Re(NO)(PPh3)(CH3)] ((S)-6 c; 84 %), which is converted (Ph3C+ PF6 -, PPh2H, tBuOK) to (S)-[(eta5-C5H4I)Re(NO)(PPh3)(CH2PPh2)] ((S)-1 c). Reactions of 1 b and (S)-1 c with Pd[P(tBu)3]2 yield [{(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(mu-X)}2] (10; X = b, Br, rac/meso, 88 %; c, I, S,S, 22 %). Addition of PPh3 to 10 b gives [(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(PPh3)(Br)] (11 b; 92 %). Reaction of (S)-[(eta5-C5H5)Re(NO)(PPh3)(CH2PPh2)] ((S)-2) and Pd(OAc)(2) (1.5 equiv; toluene, RT) affords the novel Pd3(OAc)4-based palladacycle (S,S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(mu-OAc)2Pd(mu-OAc)2Pd(mu-PPh2CH2)(Ph3P)(ON)Re(eta5-C5H4)] ((S,S)-13; 71-90 %). Addition of LiCl and LiBr yields (S,S)-10 a,b (73 %), and Na(acac-F6) gives (S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(acac-F6)] ((S)-16, 72 %). Reaction of (S,S)-10 b and pyridine affords (S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(NC5H5)(Br)] ((S)-17 b, 72 %); other Lewis bases yield similar adducts. Reaction of (S)-2 and Pd(OAc)2 (0.5 equiv; benzene, 80 degrees C) gives the spiropalladacycle trans-(S,S)-[{(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)}2Pd] (39 %). The crystal structures of (S)-6 c, 11 b, (S,S)- and (R,R)-132 C7H8, (S,S)-10 b, and (S)-17 b aid the preceding assignments. Both 10 b (racemic or S,S) and (S)-16 are excellent catalyst precursors for Suzuki and Heck couplings.     

Metal-templated diyne cyclodimerization and cyclotrimerization

Reaction of [Pt(CH3)2(COD)] (COD = 1,5-cyclooctadiene) with Ph2PCCCCPPh2 led to a mixture of [{Pt(CH3)2}2(mu-Ph2PC4PPh2)2] (1) and [{Pt(CH3)2}3(mu-Ph2PC4PPh2)3] (2). Reaction of [PtCl2(COD)] with Ph2PCCCCPPh2 led to a mixture of the thermally unstable compounds [{PtCl2}2(mu-Ph2PC4PPh2)2] (3) and [{PtCl2}3(mu-Ph2PC4PPh2)3] (4) which transform into [{PtMe2}2{mu-C8(PPh2)4}] (5) and [{PtMe2}3{mu3-C12(PPh2)6}] (6) containing 8-membered diene-diyne and 12-membered triene-triyne rings, respectively. Compound 2 can be converted to [{PtMe2}3{C12(PPh2)6}] (7) by heating with CuCl at 80 degrees C, while 1 can be heated without significant cycloaddition.     

Early/Late Heteronuclear Complexes Bridged by Bifunctional Phosphorus-Based Ligands

Substituted bifunctional phosphorus-based ligands HX(CRR') n PR"H (or -PR" 2 ) [where X = O, S, NR', (substituted) cyclopentadienyl; n = 1, 2, 3; R, R', R" = alkyl, aryl, H] were employed as bridging ligands in the synthesis of early/late bridged transition metal complexes. Synthetic routes to the bifunctional ligands were also developed. First, mononuclear complexes, such as [TpZr(OCH 2 PPh 2 ) 3 ] (Tp = trispyrazolylborato), [Cp 2 Zr(1-O-2-PHR-C 6 H 10 )(Me)] (R = 2,4,6-Pr i 3 C 6 H 2 (Tipp)), [Cp 2 Zr(SCH 2 CH 2 PHR) 2 ] (R = Ph, Mes, Tipp), and phosphinoferrocene derivatives, were prepared. These complexes are suitable precursors for the introduction of a second metal (as in, for example, [TpZr( w -OCH 2 PPh 2 ) 3 Mo(CO) 3 ]).     

The [2,5,12-C3B8H15]- anion, the first representative of the eleven-vertex hypho family of tricarbaboranes

In one synthetic step from the readily available 9-Me(2)SCH(2)-nido-7,8-C(2)B(9)H(11) (compound 1), the first representative of the eleven-vertex hypho family of tricarbaboranes, [2,5,12-C(3)B(8)H(15)][X] (X=[NMe4]+ or [PPh4]+) (compound 2), has been isolated in 32% yield and structurally characterised by single-crystal X-ray diffraction, multi-nuclear NMR spectroscopy, mass spectrometry, and computational methods. Both [NMe4]+ or [PPh4]+ salts of anion 2 were found to undergo degradative conversion to the [hypho-6,7-C(2)B(6)H(13)]- anion (anion 3) in alkaline medium. The [PPh4]+ salt of anion 2 converted quantitatively to the [6-CH3-arachno-5,10-C(2)B(8)H(12)]- anion (anion 4) if passed through a silica column or to the neutral 5-CH3-arachno-6,9-C(2)B(8)H(13) (compound 5) on treatment of its [NMe4]+ salt with dilute HCl. Moreover, the reaction of compound 2 with [RhCl2(C(5)Me(5))]2 afforded the eleven-vertex ruthenadicarbaborane [1-C(5)Me(5)-4-CH(3)-closo-1,2,3-RhC(2)B(8)H(9)] (compound 8). All these reactions resulted in an extrusion of one of the cluster carbon atoms into an exoskeletal position.     

Stable diplatinum complexes with functional thiolato bridges from dialkylation of [Pt2(mu-S)2(P-P)2] [P-P=2 x PPh3, Ph2P(CH2)3PPh2

The normally robust monoalkylated complexes [Pt(2)(mu-S)(mu-SR)(PPh(3))(4)](+) can be activated towards further alkylation. Dialkylated complexes [Pt(2)(mu-SR)(2)(P-P)(2)](2+) (P-P=2 x PPh(3), Ph(2)P(CH(2))(3)PPh(2)) can be stabilized and isolated by the use of electron-rich and aromatic halogenated substituents R [e.g. 3-(2-bromoethyl)indole and 2-bromo-4'-phenylacetophenone] and 1,3-bis(diphenylphosphino)propane [Ph(2)P(CH(2))(3)PPh(2) or dppp] which enhances the nucleophilicity of the {Pt(2)(mu-S)(2)} core. This strategy led to the activation of [Pt(2)(mu-S)(mu-SR)(PPh(3))(4)](+) towards R-X as well as isolation and crystallographic elucidation of [Pt(2)(mu-SC(10)H(10)N)(2)(PPh(3))(4)](PF(6))(2) (2a), [Pt(2)(mu-SCH(2)C(O)C(6)H(4)C(6)H(5))(2)(PPh(3))(4)](PF(6))(2) (2b), and a range of functionalized-thiolato bridged complexes such as [Pt(2)(mu-SR)(2)(dppp)(2)](PF(6))(2) [R= -CH(2)C(6)H(5) (8a), -CH(2)CHCH(2) (8b) and -CH(2)CN (8c)]. The stepwise alkylation process is conveniently monitored by Electrospray Ionisation Mass Spectrometry, allowing for a direct qualitative comparison of the nucleophilicity of [Pt(2)(mu-S)(2)(P-P)(2)], thereby guiding the bench-top synthesis of some products observed spectroscopically.     

1,2-Bis(diphenylphosphino)ethane-containing commo-ferracarboranes of unusual structure

Russian Chemical Bulletin - commo-Ferracarboranes and [8-{(nido-7″,8″-C2B9H11-9″(11″)-)Ph2PCH2CH2PPh2}-commo-3,3′-Fe-{1,2-C2H9B10}{1′2′-C2B9H11}] were...     

Regioselective nucleophilic addition of triphenylphosphine to the nitrosylruthenium alkynyl complexes having a hydrotris(pyrazol-1-yl)borate: formation of phosphonio-alkenyl, alkynyl, and allenyl species

A nitrosylruthenium alkynyl complex of TpRuCl(C[triple bond]CPh)(NO)(1a) was reacted with PPh3 in the presence of HBF4.Et2O at room temperature to give a beta-phosphonio-alkenyl complex (E)-[TpRuCl{CH=C(PPh3)Ph}(NO)]BF4(2.BF4). On the other hand, for gamma-hydroxyalkynyl complexes TpRuCl{C[triple bond]CC(R)2OH}(NO)(R = Me (1b), Ph (1c), H (1d)), similar treatments with PPh3 were found to give gamma-phosphonio-alkynyl [TpRuCl{C[triple bond]CC(Me)2PPh3}(NO)]BF4(3.BF4),alpha-phosphonio-allenyl [TpRuCl{C(PPh3)=C=CPh2}(NO)]BF4(4.BF4), and a novel product of gamma-hydroxy-beta-phosphonio-alkenyl (E)-[TpRuCl{CH=C(PPh3)CH2OH}(NO)]BF4(5.BF4), respectively. Dominant factors for the selectivity in affording 3-5 were associated with the steric congestion and electronic properties at the gamma-carbons, along with those around the metal fragment. From the bis(alkynyl) complex TpRu(C[triple bond]CPh)2(NO)6, a bis(beta-phosphonio-alkenyl)(E,E)-[TpRu{CH=C(PPh3)Ph}2(NO)](BF4)2{7.(BF4)2} was produced at room temperature. However, similar reactions at 0 degrees C gave an alkynyl beta-phosphonio-alkenyl complex (E)-[TpRu(C[triple bondCPh){CH=C(PPh3)Ph}(NO)]BF4(8.BF4) as a sole product, of which additional hydration in the presence of HBF4.Et2O afforded a [small beta]-phosphonio-alkenyl ketonyl (E)-[TpRu{CH2C(O)Ph}{CH=C(PPh3)Ph}(NO)]BF(.9BF4). Five complexes, 2-5 and 7 were crystallographically characterized.     

Electron-transfer-catalyzed rearrangement of unsymmetrically substituted diiron dithiolate complexes related to the active site of the [FeFe]-hydrogenases

Novel asymmetrically substituted azadithiolate compounds [Fe2(CO)4(kappa2-dppe){micro-SCH2N(R)CH2S}] (R=iPr, 1a; CH2CH2OCH3, 1b; CH2C6H5, 1c) have been synthesized by treatment of [Fe2(CO)6(micro-adt)] [adt=SCH2N(R)CH2S, with R=iPr, CH2CH2OCH3, CH2C6H5] with dppe (dppe=Ph2PCH2CH2PPh2) in refluxing toluene in the presence of Me3NO. 1a-c have been characterized by single-crystal X-ray diffraction analyses. The electrochemical investigation of 1a-c and of [Fe2(CO)4(kappa2-dppe)(micro-pdt)] (1d) [pdt=S(CH2)3S] in MeCN- and THF-[NBu4][PF6] has demonstrated that the electrochemical reduction of 1a-d gives rise to an Electron-transfer-catalyzed (ETC) isomerization to the symmetrical isomers 2a-d where the dppe ligand bridges the iron centers. Compounds 2a-d were characterized by IR and NMR spectroscopy, elemental analysis, and X-ray crystallography for 2a.     

A new family of chelating diphosphines with a transition metal stereocenter in the backbone: novel applications of "chiral-at-rhenium" complexes in rhodium-catalyzed enantioselective alkene hydrogenations

The title compounds are accessed by sequences starting with racemic and enantiomerically pure [(eta5-C5H5)Re(NO)(PPh3)(CH3)]. Reactions with chlorobenzene/HBF4, PPh2H, and tBuOK give the phosphido complex [(eta5-C5H5)Re(NO)(PPh3)(PPh2)] (3). Reactions with Ph3C+ BF4-, PPh2H, and tBuOK give the methylene homologue [(eta5-C5H5)Re(NO)(PPh3)(CH2PPh2)] (9). Treatment of 3 or 9 with nBuLi or tBuLi and then PPh3Cl gives the diphosphido systems [(eta5-C5H4PPh2)Re(NO)(PPh3)((CH2)nPPh2)] (n = 0/1, 5/11). Reactions of 5 and 11 with [Rh(NBD)Cl]2/AgPF6 (NBD = norbornadiene) give the rhenium/rhodium chelate complexes [(eta5-C5H4PPh2)Re(NO)(PPh3)((mu-CH2)nPPh2)Rh(NBD)]+ PF6- (n = 0/1, 6+/12+ PF6-; 30-32% overall from commercial Re2(CO)10). The crystal structures of 6+ PF6- and 12+ PF6- are compared to those of 3 and 9, and other rhodium complexes of chelating bis(diphenylphosphines). The chiral pockets defined by the PPh2 groups show unusual features. Four alkenes of the type (Z)-RCH=C(NHCOCH3)CO2R' are treated with H2 (1 atm) and (R)-6+ PF6- or (S)-12+ PF6- (0.5 mol%) in THF at room temperature. Protected amino acids are obtained in 70-98% yields and 93-82% ee [(R)-6- PF6-] or 72-60% ee [(S)-12+ PF6-]. Pressure and temperature effects are defined, and turnover numbers of > 1600 are realized.     

Synthesis and characterisation of aluminium(III) and tin(II) complexes bearing quinoline-based N,N,O-tridentate ligands and their catalysis in the ring-opening polymerisation of ε-caprolactone

The synthesis and catalysis in the ring-opening polymerisation (ROP) of ε-caprolactone (ε-CL) of aluminium(iii) and tin(ii) complexes supported by quinoline-based N,N,O-tridentate ligands are reported. Reaction of 8-{RC(O)CH(2)P(Ph(2)) = N}C(9)H(6)N (R = Bu(t), 2; R = Ph, 3) with AlMe(3) gave [Al(Me(2)){OCR = CHP(Ph(2)) = N(8-C(9)H(6)N)}] (R = Bu(t), 4; R = Ph, 5). Treatment of 2 and 3 with Sn[N(SiMe(3))(2)](2) generated tin(ii) complexes [Sn{OC(R) = CHP(Ph(2)) = N(8-C(9)H(6)N)}{N(SiMe(3))(2)}] (R = Bu(t), 6; R = Ph, 7). A similar reaction of AlMe(3) with 8-{MeC(O)CH(2)C(Me) = N}C(9)H(6)N gave [Al(Me(2)){OC(Me) = CHC(Me) = NC(9)H(6)N}] (9). Compounds 2-9 were characterised by NMR spectroscopy and elemental analysis. The molecular structures of complexes 4, 6 and 9 were determined by single crystal X-ray diffraction techniques. Investigation of catalysis of complexes 4-7 and 9 in the ROP of ε-CL revealed that the aluminium complexes, 4, 5 and 9, are much more active than the tin(ii) complexes. The kinetic studies for the polymerisation of ε-CL catalysed by complexes 4, 5 and 9 in the presence of benzyl alcohol (BnOH) indicated that the polymerisations proceed with the first-order dependence on monomer concentration. The polymerisation was well controlled and gave a polymer with narrow molecular weight distribution.     

Diverse evolution of [[Ph(2)P(CH(2))(n)PPh(2)]Pt(mu-S)(2)Pt[Ph(2)P(CH(2))(n)PPh(2)]] (n = 2, 3) metalloligands in CH(2)Cl(2)

The nucleophilicity of the [Pt(2)S(2)] core in [[Ph(2)P(CH(2))(n)PPh(2)]Pt(mu-S)(2)Pt[Ph(2)P(CH(2))(n)PPh(2)]] (n = 3, dppp (1); n = 2, dppe (2)) metalloligands toward the CH(2)Cl(2) solvent has been thoroughly studied. Complex 1, which has been obtained and characterized by X-ray diffraction, is structurally related to 2 and consists of dinuclear molecules with a hinged [Pt(2)S(2)] central ring. The reaction of 1 and 2 with CH(2)Cl(2) has been followed by means of (31)P, (1)H, and (13)C NMR, electrospray ionization mass spectrometry, and X-ray data. Although both reactions proceed at different rates, the first steps are common and lead to a mixture of the corresponding mononuclear complexes [Pt[Ph(2)P(CH(2))(n)PPh(2)](S(2)CH(2))], n = 3 (7), 2 (8), and [Pt[Ph(2)P(CH(2))(n)PPh(2)]Cl(2)], n = 3 (9), 2 (10). Theoretical calculations give support to the proposed pathway for the disintegration process of the [Pt(2)S(2)] ring. Only in the case of 1, the reaction proceeds further yielding [Pt(2)(dppp)(2)[mu-(SCH(2)SCH(2)S)-S,S']]Cl(2) (11). To confirm the sequence of the reactions leading from 1 and 2 to the final products 9 and 11 or 8 and 10, respectively, complexes 7, 8, and 11 have been synthesized and structurally characterized. Additional experiments have allowed elucidation of the reaction mechanism involved from 7 to 11, and thus, the origin of the CH(2) groups that participate in the expansion of the (SCH(2)S)(2-) ligand in 7 to afford the bridging (SCH(2)SCH(2)S)(2-) ligand in 11 has been established. The X-ray structure of 11 is totally unprecedented and consists of a hinged [(dppp)Pt(mu-S)(2)Pt(dppp)] core capped by a CH(2)SCH(2) fragment.     

Selective cyclopalladation of R3P=NCH2Aryl iminophosphoranes. Experimental and computational study

The orientation of the orthopalladation of iminophosphoranes R3P=NCH2Aryl (R=Ph, Aryl=Ph (1a), C6H(4)-2-Br (1b), C6H4-Me-2 (1e), C6H3-(Me)(2)-2,5 (1f); R=p-tolyl, Aryl=Ph (1c); R=m-tolyl, Aryl=Ph (1d); R3P=MePh2P, and Aryl=Ph (1g)) has been studied. 1a reacts with Pd(OAc)2 (OAc=acetate) giving endo-[Pd(micro-Cl){C,N-C6H4(PPh2=NCH2Ph)-2}]2 (3a), while exo-[Pd(micro-Br){C,N-C6H4(CH2N=PPh3)-2}]2 (3b) could only be obtained by the oxidative addition of 1b to Pd2(dba)3. The endo form of the metalated ligand is favored kinetically and thermodynamically, as shown by the conversion of exo-[Pd(micro-OAc){C,N-C6H4(CH2N=PPh3)-2}]2 (2b) into endo-[Pd(micro-OAc){C,N-C6H4(PPh2=NCH2Ph)-2}]2 (2a) in refluxing toluene. The orientation of the reaction is not affected by the introduction of electron-releasing substituents at the Ph rings of the PR3 (1c and 1d) or the benzyl units (1e and 1f), and endo complexes (3c-3f) were obtained in all cases. The palladation of MePh2P=NCH2Ph (1g) can be regioselectively oriented as a function of the solvent. The exo isomer [Pd(micro-Cl){C6H4(CH2N=PPh2Me)-2}]2 (exo-3g) is obtained in refluxing CH2Cl2, while endo-[Pd(micro-Cl){C,N-C6H4(PPh(Me)=NCH2Ph)-2}]2 (endo-3g) can be isolated as a single isomer in refluxing toluene. In this case, the exo metalation is kinetically favored while an endo process occurs under thermodynamic control, as shown through the rearrangement of [Pd(micro-OAc){C6H4(CH2N=PPh2Me)-2}]2 (exo-2g) into [Pd(micro-OAc){C,N-C6H4(P(Ph)Me=NCH2Ph)-2}]2 (endo-2g) in refluxing toluene. The preference for the endo palladation of 1a and the kinetic versus thermodynamic control in 1g has been explained through DFT studies of the reaction mechanism.     

New iridacyclohexadienes and iridabenzenes by [2+2+1] cyclotrimerization of alkynes and facile interconversion between iridacyclohexadienes and iridabenzenes

Iridabenzenes [Ir[=CHCH=CHCH=C(CH2R)](CH3CN)2(PPh3)2]2+ (R=Ph 4 a, R=p-C6H4CH3 4 b) are obtained from the reactions of H+ with iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](CO)(PPh3)2]+ (R'=H 3 a, R'=CH3 3 b), which are prepared from [2+2+1] cyclotrimerization of alkynes in the reactions of [Ir(CH3CN)(CO)(PPh3)2]+ with HC[triple chemical bond]CH and HC[triple chemical bond]CR. Iridabenzenes 4 react with CO and CH3CN in the presence of NEt3 to give iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CHR)](CO)2(PPh3)2]+ (6) and [Ir[-CH=CHCH=CHC(=CHR)](CH3CN)2(PPh3)2]+ (7), respectively. Iridacyclohexadienes 6 and 7 also convert to iridabenzenes 4 by the reactions with H+ in the presence of CH3CN. Alkynyl iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](-C[triple chemical bond]CH)(PPh3)2] (8) undergo a cleavage of C[triple chemical bond]C bond by H+/H2O to produce [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](-CH3)(CO)(PPh3)2] (10) via facile inter-conversion between iridacyclohexadienes and iridabenzenes.     

Chelate and pincer carbene complexes of rhodium and platinum derived from hexaphenylcarbodiphosphorane, Ph3P=C=PPh3

The reaction of [(cod)RhCl]2 with Ph3P=C=PPh3 (1) gave the bidentate Rh(I) carbene complex, (cod)Rh[eta2-C{P(C6H4)Ph2}{PPh3}] (2), in which one of the Ph groups in 1 underwent orthometalation to form the chelate. Displacement of cod by 2 equiv of PMe3 transformed 2, via a second orthometalation event, into the Rh(III) C,C,C pincer carbene complex, HRh(PMe3)2[eta3-C{P(C6H4)Ph2}2] (3). The reaction of [Me2Pt(SMe2)]2 with 1 led directly to the analogous C,C,C pincer carbene complex of Pt(II), (Me2S)Pt[eta3-C{P(C6H4)Ph2}2] (4). DFT calculations on a model form of 3 suggest a net single sigma-bonding interaction between Rh and an sp2-hybridized carbene center, with a HOMO that is predominantly carbene pz in character.