Precipitation and association in a mixture of dodecylammonium chloride and sodium dodecyl sulfate in aqueous medium

The precipitation boundary in aqueous mixtures of dodecylammonium chloride (DDACl) and sodium dodecyl sulfate (NaDS) was determined in the absence and in the presence of 1 mol dm^–3 NaCl. The structure and the composition of the solid phase was characterized by x-ray and chemical analysis, respectively. Activities of Cl^– and Na⁺ ions in the aqueous phase were measured by ion-selective electrodes. As determined by calorimetry, precipitation is an exothermic process.The DDA·DS precipitate was formed in the equimolar region of the precipitation components. Its crystallographic structure is described. In an excess of sodium dodecyl sulfate, the precipitate incorporated substantial amounts of NaDS, as detected by analyses of both solid and liquid phases. X-ray analysis of the dry sample showed peaks of crystalline NaDS. According to the polarization microscopy of wet samples, one may conclude that liquid crystals, containing an excess of NaDS, are incorporated in the solid DDA·DS phase. The same was found in the case of an excess of DDACl; mixed liquid crystals with an excess of DDACl were incorporated in the solid DDA·DS.Interpretation of the solubility boundary points to the presence of DDA⁺·DS^– ion pairs. Formation of these species at low ionic strengths is characterized by the equilibrium constantK _a ⁰ 10⁶. However, in the 1 mol dm^–3 NaCl, the association of DDA⁺ and DS^– ions into pairs is inhibited (K _a ⁰ 0). This finding can be explained in terms of ionic clouds around the charged surfactant heads: if these heads are not in close contact, but separated due to structural effects of the chains, the dense distribution of counterions around them at high ionic strengths may compensate for electrostatic attraction and, thus, inhibit ion-pairing.     

Interaction of slightly cross-linked gels of poly(diallyldimethylammonium bromide) with sodium dodecyl sulfate. Diffusion of surfactant ions in gel

The dynamics of the changing microenvironment of the fluorescent probe pyrene in slightly cross-linked networks of poly(diallyldimethylmmonium bromide) during diffusion of sodium dodecyl sulfate (SDS) in the gel phase has been investigated by fluorescence spectroscopy. Values of the spectral ratio I₃/I₁ for pyrene monomer included in SDS micelles in the swollen networks fall between the corresponding values for pyrene in water and for pyrene dissolved in SDS micelles in aqueous solution. In the narrow interval of the surfactant concentrations in the gel phase, the formation of pyrene excimers is observed. The values of the critical micelle concentration in the gel phase (ca. 5 × 10^?4 to 8 × 10^?4 mol/L) are tenfold lower than in aqueous solutions of the surfactant. The effective micellar diffusion coeffecient D in the gel phase increases with increasing swelling of the network. © 1993 John Wiley & Sons, Inc.     

Solute partition study in aqueous sodium dodecyl sulfate micellar solutions for some organic reagents and metal chelates

The partition constants (K _d) have been estimated for nitrophenols, thiazolylazo dyestuffs and metal chelate compounds into the sodium dodecyl sulfate (SDS) micellar phase at an ionic strength of 0.10M [(H⁺, Na⁺)Cl^–] and at 20 °C. The equilibrium partition data obtained by batch-wise solution spectrophotometry (equilibrium shift method) agree well with those by the micellar electrokinetic capillary chromatography (MECC) with the SDS micellar pseudo-stationary phase. The MECC clearly discriminates a very small difference (0.03) in the logK _d values of some metal chelates. The plot of theK _d values with the van der Waals volume of the solute molecules obviously shows the leveling-off of theK _d values over solute size near 110 ml/mol, which seems to be consistent with the results obtained in the Triton X-100 micellar system. This phenomenon arises most probably from the rigidity of the micellar pseudo-phase (a micellar volume-constraint effect) in sharp contrast with true two-phase partitioning such as solvent extraction systems.     

糖苷基季铵盐与十二烷基硫酸钠复配性能的研究

研究了糖苷基季铵盐(CAPG)与十二烷基硫酸钠(K12)复配体系的稳定性、表面活性、泡沫性能和润湿性能.结果表明:CAPG与K12复配体系的稳定性好,并表现出很好的协同增效作用.当n(CAPG)∶ (K12)等于0.1∶ 1,0.3∶ 1,0.5∶ 1时,复配体系的临界胶束浓度(cmc)分别为0.081 mmol/L,0.065 mmol/L,0.054 mmol/L,大大低于单一组分的cmc,临界胶束浓度时的表面张力(γcmc)比单一组分略低,起泡力和泡沫稳定性均好于单一组分,润湿力比K12略低,但比CAPG好得多.     

Phase Behavior in Mixtures of Cationic Dimeric and Anionic Monomeric Surfactants

The formation of mixed aggregates has been investigated in the mixture of oppositely charged surfactants vastly differing in molecular geometry and size. The systems considered is mixture of the cationic gemini surfactant, ethanediyl-1,2-bis(dodecyldimethylammonium bromide), and anionic surfactant, sodium dodecyl sulfate. Various mixed nano- and microaggregates (micelles, vesicles, thin lamellar sheets, and tubules) were formed depending on bulk composition and total surfactant concentration. Two types of aggregates were found in precipitate, the tubules as prevailing aggregates on the gemini-rich side, and vesicles as prevailing aggregates on the SDS-rich side. The tubules formation was ascribed to mutual influence of specific structure of cationic dimeric surfactant and electrostatic interactions at the bilayer/solution interface. The proposed mechanism involved the formation of lamellar sheets, which rolled-up into tubules.     

Interaction of sodium dodecyl sulfate with polyelectrolyte complexes derived from diazoresin and sulfonate-containing polymers

The sulfonate-containing polyelectrolytes (SPE) from sulfonation of polystyrene (PS) and copolymerization of 3-sulfo-propyl methacrylate, potassium salt (SPMS) with styrene (S) were prepared. Photosensitive polyelectrolyte complexes (PEC_DR) derived from SPE and diazoresin (DR), which does not dissolve in water or organic solvent due to its ionic crosslinking structure, dissolves in aqueous solution of sodium dodecyl sulfate (SDS) due to the dissociation of PEC_DR and the hydrophobic interaction between SDS and the polymer chain. The photosensitive behavior and thermostability of the PEC_DR were investigated, and it was found that the thermostability of PEC_DR increases dramatically in SDS aqueous solution. It was proposed that the higher thermostability of PEC_DR in SDS aqueous solution is due to an aggregation of SDS molecules around the diazonium group of the PEC_DR, which protects the  N group of the DR from attack by the nucleophiles. The image-forming behavior of PEC_DR by ultraviolet (UV) light was examined and considered to be different from other PECs. It was concluded that the photoimaging behavior of PEC_DR is based on a reaction in which an ionic bond converts to a covalent bond. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2601–2606, 1999     

Adsorption at the air/water interface in dodecylammonium chloride/sodium dodecyl sulfate mixtures

The composition and properties of the adsorption films of dodecylammonium chloride/sodium dodecyl sulfate at the air/water interface depend on interactions between the film molecules and equilibria in the bulk phase (monomer-micelle and/or monomerprecipitate equilibria).The negative value of surface molecular interaction parameter ^mon calculated using the regular solution theory indicates strong attractive interactions between adsorbed molecules. Electrostatic interactions between oppositely charged ionic head groups enhance the adsorption of surfactants and decrease the minimum molar area of surfactant molecules at the air/water interface. The addition of an oppositely charged surfactant enhances packing at the air/water interface and transition from a liquid expanded to a liquid condensed state. Surface potential measurements reveal positive values for the mixtures investigated, implying the cationic surfactant ions are closer to the surface than the anionic ones.     

Effects of nonionic surfactant and sodium dodecyl sulfate layers on electroacoustics of hexadecane/water emulsions

Hexadecane-in-water emulsion droplets were formed in a homogeniser in the presence of a mixture of an anionic surfactant (sodium dodecyl sulfate, SDS) and nonionic surfactants of various chain lengths [nonylphenol ethoxylate (C₉φE_N, N=100, 40 and 30) or an alcohol ethoxylate (Brij35)]. The dynamic mobility of the oil droplets was then measured using a flow-through version of an AcoustoSizer. Large changes were observed in the dynamic mobility of the particles formed with the mixed surfactants compared to particles formed with SDS alone. O'Brien's “gel layer” model was employed to interpret the data. The characteristics of the adsorbed layer appeared to be similar whether the nonionic surfactant was adsorbed concurrently with the SDS as the emulsion formed or was merely added afterwards to the emulsion established. The particle size, the charge and the molar fraction of SDS had virtually no effect. The layers formed with the nonionic surfactants decreased in thickness with decreasing molecular weight as expected. Passage through the homogeniser itself had no effect on the properties of the largest nonionic surfactant and, hence, on the adsorption layer formed with it. Received: 4 October 2000 Accepted: 16 October 2000     

Miscibility of sodium chloride and sodium dodecyl sulfate in the adsorbed film and aggregate

The adsorption, micelle formation, and salting out of sodium dodecyl sulfate in the presence of sodium chloride were studied from the viewpoint of their mixed adsorption and aggregate formation. The surface tension of aqueous solutions of a sodium chloride–sodium dodecyl sulfate mixture was measured as a function of the total molality and composition of the mixture. Phase diagrams of adsorption and aggregate formation were obtained by applying thermodynamic equations to the surface tension. Judging from the phase diagrams, sodium chloride and sodium dodecyl sulfate are miscible in the adsorbed film at very large composition of sodium chloride and in the salted-out crystalline particle, while they are immiscible in the micelle. The miscibilities in the adsorbed film, micelle, and crystalline particle increase in the following order: particle > adsorbed film > micelle. The difference in miscibility among the oriented states was ascribed to the difference in geometry between the adsorbed film and micelle and to the interaction between bilayer surfaces in the particle.     

Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

十二烷基硫酸钠与羟乙基纤维素的相互作用

本文用表面张力(γ)和电导率(κ)方法研究了阴离子表面活性剂十二烷基硫酸钠(SDS)与天然纤维素的水溶性改性物羟乙基纤维素(HEC)的相互作用.实验结果表明,SDS-HEC溶液的γ-lgcSDS曲线和κ～CSDS曲线均呈现双拐点特征,并且γ-lgcSDS曲线上两个SDS临界浓度值(c1 )γ及(c2)γ,与κ～CSDS...     

Effect of sodium dodecyl sulfate on lipase ofCandida lipolytica

The effects of sodium dodecyl sulfate on extracellular lipase produced byCandida lipolytica have been studied. The microorganism was grown in culture medium containing different sodium dodecyl sulfate concentrations added to the culture at different intervals of growth. The extracellular lipase activity was not detected when the treated culture supernatants were directly tested in Yeast Mold Agar-Triolein-Rhodamine plates, regardless of surfactant addition time and concentrations. However, after ammonium sulfate precipitation and dialysis, the extracellular lipase activity could be recovered. Therefore, the surfactant, under the experimental conditions used here, does not seem to be able to inhibit lipase production, but it does inhibit the enzyme activity because of its presence in the mixture of the reaction.     

Thermodynamic and aggregation properties of sodium dodecyl sulfate in aqueous binary mixtures of isomeric butanediols

The effect of aqueous binary mixtures of isomeric butanediols on the micellization of sodium dodecyl sulfate has been investigated. Conductivity and fluorescence techniques were employed to determine the critical micellar concentration, the degree of dissociation of the counterions and the aggregation numbers of the surfactants in these binary blends. Differential conductivity plots were employed to distinguish between the cooperative and the stepwise aggregation process of the surfactant in each solvent system. The mass-action model was employed to calculate the hydrophobic and the electrostatic contributions to the Gibbs energy of micellization as well as the monomer and the counterion concentrations in the postmicellar region. The thermodynamic parameters calculated for each system indicate that the micellization process occurs more readily in the presence of cosolvent owing to the formation of mixed micelles. Received: 5 July 2000 Accepted: 25 July 2000     

Tripolyphosphate-responsive release property of monoolein cubic phase containing sodium dodecyl sulfate and oligo chitosan

Tripolyphosphate (TPP)-responsive MO cubic phase was prepared by immobilizing oligo chitosan in the water channel through its electrostatic attraction with sodium dodecyl sulfate (SDS). The phase transition temperature (PTT) increased with increasing the content of SDS. The PTT of cubic phase whose SDS content was 0%, 0.21%, 0.42%, 0.84%, and 1.68%, determined by polarized microscopy, was about 69.5°C, 72°C, 75°C, 80.5°C, and 95°C, respectively. The PTT did not markedly deviate from that determined by differential scanning calorimetry. The release degree for 72 h of dye (i.e., amaranth and methylene blue) was dependent on the pH value of release medium (pH 3.0 and pH 7.0). Moreover, the release degree significantly increased when the TPP concentration in the release medium increased to 0.4% (w/v). Oligo chitosan was electrostatically complexed with TPP and the complexation took place extensively at the oligo chitosan/TTP mass ratio of 1:0.125 and 1:0.25 and at the oligo chitosan concentration of 1.6% (w/v), evidenced by optical spectroscopy and scanning electron microscopy. It was thought that the complexation was responsible for the TPP concentration-dependent release.     

Separation and selectivity in micellar electrokinetic chromatography using sodium dodecyl sulfate micelles or Tween 20-modified mixed micelles

The separation and selectivity of eight aromatic compounds ranging from hydrophilic to hydrophobic properties in micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate (SDS) micelles or Tween 20-modified mixed micelles were investigated. The effect of different operation conditions such as SDS and Tween 20 modifier surfactant concentration, buffer pH, and applied voltage was studied. The resolution and selectivity of analytes could be markedly affected by changing the SDS micelle concentration or Tween 20 content in the mixed micelles. Applied voltage and pH of running buffers were used mainly to shorten the separation time. Complete separation of eight analytes could be achieved with an appropriate choice of the concentration of SDS micelles or Tween 20-modified mixed micelles. Quicker elution and better precision could be obtained with SDS-Tween 20 mixed micelles than with SDS micelles. The mechanisms that migration order of those analytes was mainly based on their structures and solute-micelle interactions, including hydrophobic, electrostatic, and hydrogen bonding interactions, were discussed.     

Effect of sodium dodecyl sulfate on the reactivity of 2-dimethylaminomethylphenol with 4-nitrophenylbis(chloromethyl)phosphinate

The reactivity of 2-dimethylaminomethylphenol (1) toward 4-nitrophenylbis(chloromethyl)phosphinate (2) was studied in micellar solutions and in the lyotropic liquid-crystalline mesophase of the sodium dodecyl sulfate (SDS)-water system. The reaction between1 and2 is inhibited in the presence of SDS, which is explained by the shift of the acid-base equilibrium of1 toward the formation of a nonreactive protonated form.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1959–1962, October, 1995.     

Studies of the association of chitosan and alkylated chitosan with oppositely charged sodium dodecyl sulfate

Cationic biopolymer chitosan has many applications in food, cosmetic and pharmaceutical industries. Grafting alkylated chains on its backbone can hydrophobically modify this water-soluble polymer.This paper concerns unmodified chitosan, alkylated chitosan and their interactions with a model anionic surfactant, sodium dodecyl sulfate (SDS). The solvent is pH 4 acetic acid solution. The purpose of this study is to highlight the hydrophobicity brought by the alkylated chains by comparing surface tension measurements and rheological properties of hydrophobically modified polymer (HMP) and chitosan solutions at 25 °C.Interactions of chitosan and HMP with surfactant have also been investigated giving information about surface activity and electrical conductivity of such systems. It results that alkylated chitosan/SDS system is more surface active than chitosan/SDS and it offers new potential applications in pharmaceutical and cosmetic fields because of the formation of amphiphilic complexes.     

Ultrathin-layer sodium dodecyl sulfate disc electrophoresis of proteins in the range from 10 to 220 kDa in homogeneous,low-concentrated polyacrylamide gels

This study describes an ultrathin-layer sodium dodecyl sulfate (SDS) disc electrophoresis in polyacrylamide gels of a thickness of only 150 microm. By use of 2-amino-2-methyl-1,3-propanediol/glycine instead of traditional Tris/HCl buffer in the resolving phase of the gel, proteins with a wide range of molecular sizes (10 kDa to over 220 kDa) are separated in unusually low-concentrated gels (4%T, 3.3%C). 2-Amino-2-methyl-1,3-propanediol in the resolving part of the gel contributes to stabilization of the pH value at 8.8, while glycine improves destacking as well as separation of small proteins from the bulk of stacked SDS. This method combines both the advantages of conventional slab-gel electrophoresis and capillary gel electrophoresis. It is easy to apply and well suited for all further miniaturization attempts.