环己酮肟在改性氧化锆催化剂上的Beckmann重排反应Ⅲ．B_2O_3对ZrO_2的改性效应

采用ＩＲ和ＸＲＤ技术研究了Ｂ２Ｏ３／ＺｒＯ２催化剂的结构性质，用ＩＣＰ－ＭＳ测定了样品中Ｂ２Ｏ３的含量，通过Ｈａｍｍｅｔ指示剂正丁胺滴定法测定了Ｂ２Ｏ３／ＺｒＯ２系列催化剂的表面酸性；研究了载体预处理温度对样品表面酸性和结构的影响，以及Ｂ２Ｏ３含量对样品催化性能的影响；比较了Ｂ２Ｏ３负载于ＺｒＯ２，Ａｌ２Ｏ３，ＳｉＯ２，ＴｉＯ２，ＭｇＯ和ＨＺＳＭ－５上催化活性和目的产物选择性的差异，讨论了Ｂ２Ｏ３／ＺｒＯ２催化剂在气固相Ｂｅｃｋｍａｎｎ重排反应中的作用特点     

碱金属和氯离子对Mn_2O_3－Na_2WO_4／SiO_2催化剂甲烷氧化偶联反

本文考察了碱金属和氯离子对Ｍｎ２Ｏ３－Ｎａ２ＷＯ４／ＳｉＯ２催化剂甲烷氧化偶联反应性能的影响，结果表明，只有在氯离子和碱金属的共同作用下才能有效地提高Ｃ２烃的收率及其选择性．催化剂经ＮａＣｌ改性后，Ｃ２烃收率为２２％，并可获较高的烯烷比．在考察范围内增加接触时间（Ｗ／Ｆ），催化剂选择性保持不变，但乙烯的选择性呈上升趋势．钠盐Ｎａ２ＷＯ４、Ｎａ４Ｐ２Ｏ７、Ｎａ２ＳＯ４、Ｎａ２ＣＯ３及Ｎａ２Ｂ４Ｏ７对稳定催化剂的贡献按上述顺序逐渐减小．对ＮａＣｌ－Ｍｎ２Ｏ３－Ｎａ２ＷＯ４／ＳｉＯ２催化剂进行了稳定性考察，使用ＸＰＳ、ＸＲＤ和红外光谱对经历不同反应时间的催化剂进行了表征．     

甲烷氧化偶联制乙烯La2O3—BaO体系催化剂稳定性的研究

研究了甲烷氧化偶联制乙烯高选择性Ｌａ２Ｏ３－ＢａＯ体系催化剂的稳定性．在８００℃、ＣＨ４空速１００００ｈ－１、ＣＨ４／Ｏ２＝８．０～８．３的条件下，催化剂稳定运转了５００ｈ，ＣＨ４转化率和Ｃ２选择性分别为≥１８％和≥８０％．ＸＲＤ和ＸＰＳ分析表明，该催化剂物相稳定，表面Ｌａ／Ｂａ原子浓度之比随反应时间的增加而稍有增加，有利于催化剂活性和选择性的稳定．     

甲烷氧化偶联催化剂ThO_2－La_2O_3／BaCO_3上活性氧物种研究

本文运用电子顺磁共振（ＥＰＲ）技术研究了Ｏ２在甲烷氧化偶联催化剂ＴｈＯ２，Ｌａ２Ｏ３／ＢａＣＯ３及ＴｈＯ２－Ｌａ２Ｏ３／ＢａＣＯ３上的吸附．通过对这三种催化剂上生成的Ｏ２超氧离子性质的比较，并与其催化活性相关联，发现ＴｈＯ２的掺杂使Ｏ２离子的ｇｚｚ值向低场方向移动，这可能有利于Ｏ２离子在升温过程中向Ｏ２离子的转化，从而使ＴｈＯ２－Ｌａ２Ｏ３／ＢａＣＯ３的催化活性和选择性有明显的提高．本文还考察了ＣＯ２对Ｏ２离子的影响．     

超细Pd—B／SiO2非晶态合金加氢反应的催化活性

采用浸渍法并通过ＫＢＨ４还原制备超细Ｐｄ－Ｂ／ＳｉＯ２非晶态合金催化剂,以硝基苯加氢生成苯胺为目标反应,考察了上述催化剂的活性和选择性及热稳定性,并与晶态Ｐｄ－Ｂ／ＳｉＯ２和Ｐｄ／ＳｉＯ２催化剂及非负载型Ｐｄ－Ｂ非晶态合金催化剂进行了比较。     

甲苯气相选择氧化制苯甲醛 Ⅳ.助剂锂、钾、铯对V_2O_5/TiO_2催化剂性能的影响

在Ｖ２Ｏ５／ＴｉＯ２催化剂中分别添加Ｌｉ、Ｋ、Ｃｓ等碱金属离子，利用ＢＥＴ、ＸＲＤ、ＸＰＳ、Ｈ２－ＴＰＲ、Ｏ２－ＴＰＤ－ＭＳ和化学分析方法，研究了催化剂结构和性能的变化．结果表明，催化剂在添加不同碱金属离子后，其结构和表面活性氧发生了很大变化．Ｋ离子可以改善催化剂的活性、提高反应选择性；Ｌｉ离子能提高催化剂活性，但在相当宽的温度范围内使反应选择性下降；在６９３Ｋ以下，Ｃｓ离子对催化剂的活性和选择性均起抑制作用．     

单斜及四方晶相ZrO2催化CO加氢反应性能的比较

研究了以纯单斜（ｍ）和四方（ｔ）晶相ＺｒＯ２为催化剂的ＣＯ加氢反应．尽管两种晶相催化剂均有较高的低碳烯烃的选择性,但是也发现了两者催化性能的显著差别．ｍ－ＺｒＯ２催化剂对异丁烯有突出的选择性,而ｔ－ＺｒＯ２催化剂,则只有乙烯和丙烯,几乎没有Ｃ４烯烃的选择性．室温下ＣＯ吸附的原位ＩＲ谱测试可见,只有在ｔ－ＺｒＯ２催化剂上观测到不可逆含氧吸附物种．吡啶吸附的Ｒａｍａｎ谱显示出它们之间表面性质的差别,ｍ－ＺｒＯ２催化剂表面存在等强度的Ｌｅｗｉｓ和Ｂｒｏｎｓｔｅｄ酸中心,而在ｔ－ＺｒＯ２催化剂表面几乎只有Ｂｒｏｎｓｔｅｄ酸中心．催化过程的一些模型分子电子结构计算也表明了ＺｒＯ２催化剂对低碳烯烃选择性内在的电子结构条件．我们推测ＣＯ在ｍ－ＺｒＯ２催化剂表面的孪式吸附物种可能是导致异丁烯产物的根源     

Ba—La2O3催化剂的表面碱性,活性氧种对甲烷氧化偶联的影响

利用ＣＯ２－ＴＰＤ技术考察了Ｂａ－Ｌａ２Ｏ３系催化剂的表面碱性，实验发现，催化剂表面仅有单一的强碱位或中碱位时，其催化性能均较差。只有表面的中碱位与强碱位以适当量共同存在的样品（６％Ｂａ－Ｌａ２Ｏ３），才能获得好的催化活性和Ｃ２选择性。此碱性特征可能有利于表面活性位的产生。同时利用ＸＲＤ和ＸＰＳ等技术分别对体相结构和表面氧物种进行了研究。结果表明，Ｂａ－Ｌａ２Ｏ３系催化剂表面存在Ｏ２＾２－离子，但     

La-Ba-Sm体系催化剂上的甲烷氧化偶联

用甲烷氧化偶联反应评价了不同方法制备的Ｌａ－Ｂａ－Ｓｍ体系催化剂，结果表明，用机械混合Ｌａ２Ｏ３，Ｂａ（ＯＨ）２．８Ｈ２Ｏ和Ｓｍ２Ｏ３三组分及高温焙烧方法制备的催化剂，从Ｃ２收率和选择性总体看，较其它方式优越，在催化剂（ＩＶ）上进行了５００ｈ的稳定性实验，在整个过程中，催化剂的活性和选择性基本稳定；催化剂的起动温度较低，在较宽的温度范围内易于控制对工业生产意义较大，通过ＸＲＤ，ＸＰＳ，ＩＲ，ＳＥＭ     

碱土金属氟化物促进Eu2O3催化剂的甲烷氧化偶联性能

考察了碱土金属氟化物促进的Ｅｕ２Ｏ３在甲烷氧化偶联反应中的催化性能。发现在Ｅｕ２Ｏ３中添加碱土金属氧化物后，碳二烃（Ｃ２）的选择性和收率都有明显提高。当Ｅｕ２Ｏ３摩尔含量相同时，催化性能按ＣａＦ２－Ｅｕ２Ｏ３＝ＢａＦ２－Ｅｕ２Ｏ３〈ＳｒＦ２－Ｅｕ２Ｏ３顺序递增，ＸＲＤ分析结果表明，在新鲜的ＢａＦ２－Ｅｕ２Ｏ３催化剂中了菱形ＥｕＯＦ新相，而在其它两类催化剂中氟氧离子交换不明显，这种差异与碱土金属氟化     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Formal [(2+2)+2] and [(2+2)+(2+2)] nonconjugated dienediyne cascade cycloadditions

[reaction: see text] Fluoranthene 2 and heptacycle 3 are easily accessible from the reaction of diyne 1 and norbornadiene (NBD) in the presence of the rhodium catalyst. The unusual [(2+2)+(2+2)] adduct 3 was confirmed by the X-ray crystal structure analysis.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Die Photoionenspektren von SCl2, S2Cl2 und S2Br2

Photoionization Mass Spectra of SCl₂, S₂Cl₂, and S₂Br₂ Photoionization mass spectra of SCl₂, S₂Cl₂, and S₂Br₂ have been measured. Heats of formation, bond energies, and ionization potentials of fragments have been calculated from appearance potentials.