A new approach for the detection of a nonfluorescent compound by CE-resonance Raman spectroscopy based on the sweeping-MEKC mode

A CE-resonance Raman spectroscopy (CE-RRS) method based on MEKC and sweeping-MEKC modes is described. A nonfluorescent compound, malachite green (MG), and a doubled Nd:YAG laser (532 nm, 300 mW) were selected as model compound and light source, respectively. In order to carry out a quantitative analysis of MG, a monochromator (effective bandwidth, 0.4 nm) was used to collect the specific Raman line at 1616 cm(-1) (N-phi and C-C stretch, corresponding to 582 nm when the wavelength of the exciting source was 532 nm). As a result, the LOD for MG was 10 ppm, based on the MEKC/RRS mode. This could be improved to 5 ppb when the sweeping-MEKC/RRS mode was applied. Furthermore, with the addition of nano-size silver colloids to the CE buffer the detection limits can be further improved, but the data obtained with surface-enhanced resonance Raman spectroscopy (SERRS) are less useful for quantitative purposes.     

Violet light emitting diode-induced fluorescence detection combined with on-line sample concentration techniques for use in capillary electrophoresis

The first application of a violet light-emitting diode (LED) for fluorescence detection in capillary electrophoresis (CE) is described. The utility of violet LED (peak emission wavelength at 410 nm, approximately 2 mW) for fluorescence detection is demonstrated by examining reserpine and dopamine-labeled NDA (naphthalene-2,3-dicarboxaldehyde), respectively. The detection limit for reserpine was determined to be 2.5 x 10(-6) M by normal micellar electrokinetic capillary chromatography (MEKC) and this was improved to 2.0 x 10(-9) M and 2.0 x 10(-10) M when sweeping-MEKC and cation-selective exhaustive injection (CSEI)-sweep-MEKC techniques were applied, respectively. In addition, the detection limit of NDA-labeled dopamine was determined to be 6.3 x 10(-6) M by means of normal MEKC and this was improved to 3.0 x 10(-8) M when the sweeping-MEKC mode was applied.     

Analysis of riboflavin in beer by capillary electrophoresis/blue light emitting diode (LED)-induced fluorescence detection combined with a dynamic pH junction technique

A simple, inexpensive and reliable method for the routine analysis of riboflavin in beer by capillary electrophoresis-light emitting diode (CE-LED) induced fluorescence detection is described. A simple and straightforward sample preparation is involved and the method is based on an inexpensive blue LED as the light source combined with an on-line sample concentration technique. For this detection system, using a normal micellar electrokinetic chromatography (MEKC), stacking-MEKC and dynamic pH junction techniques, the detection limits were found to be 480, 20 and 1 ng mL⁻¹, respectively. In addition, the number of theoretical plates for riboflavin was determined to be 3.8×10⁴ by means of a dynamic pH junction and this was improved to 3.2×10⁶ when the dynamic pH junction-sweeping mode was applied. The concentrations of riboflavin in 12 samples of different types of commercial beer were found to be in the range of 130-280 ng mL⁻¹.     

Optimization of the separation and on-line sample concentration of phenethylamine designer drugs with capillary electrophoresis-fluorescence detection

Five 2C-series of phenethylamine designer drugs, including 2,5-dimethoxy-4-ethylthio-phenethylamine (2C-T-2), 2,5-dimethoxy-4-(n)-propylthiophenethylamine (2C-T-7), 4-chloro-2,5-dimethoxyphenethylamine (2C-C), 4-bromo-2,5-dimethoxy-phenethylamine (2C-B), 2,5-dimethoxy-4-iodo-phenethylamine (2C-I), were synthesized and standard GC/MS and fluorescence spectra are reported for them. A mixture of the five drugs was separated and detected by means of capillary electrophoresis (CE) with native fluorescence and light emitting diode (LED)-induced fluorescence (LIF) detection, respectively, for comparison. In the former case, exciting at a wavelength of 300 nm from a Xe lamp was used. The detection limits were found to be only in the range of approximately 10(-4) M by the micellar electrokinetic chromatography (MEKC) mode but were improved to approximately 10(-7) M when the sweeping-MEKC mode was used. For a highly sensitive analysis, LED-induced fluorescence detection was examined by derivatizing the compounds with a fluorescent dye, fluorescein isothiocyanate isomer I (FITC). A blue-LED (approximately 2 mW) was used as the fluorescence excitation source. The detection limits were improved to approximately 10(-7) and approximately 10(-8) M, respectively, when the MEKC and stacking-MEKC modes were applied. A mimic urine sample was obtained by spiking urine from a volunteer with the five standards, and after liquid-liquid extraction, the sample was examined by means of the MEKC-LIF mode. The extraction procedures used for the urine sample and the CE conditions for the separation were optimized.     

Comparison of the use of single capillaries and coupled capillaries based on micellar electrokinetic chromatography (MEKC) and sweeping-MEKC modes

The use of single capillaries (25 and 50 microm inner diameter (ID)) and coupled capillaries of different diameters (100-50 and 75-25 microm ID) based on micellar electrokinetic chromatography (MEKC) and sweeping-MEKC modes is compared and reported. Naphthalene-2,3-dicarboxaldehyde (NDA)-derivatized dopamine was selected as the model compound by examining the fluorescence intensity when a violet (410 +/- 7 nm, 2 mW) light-emitting-diode (LED) was used as the light source. When a single capillary (50 microm ID) was used, the detection limit for NDA-derivatized dopamine was determined to be 2.0 x 10(-7) M (Signal-to-nose ratio S/N = 3) based on the MEKC mode. This was improved to 4.0 x 10(-9) M when the sweeping-MEKC mode was applied. In addition, this can be further improved to 1.0 x 10(-9) M and 5.6 x 10(-10) M when 100-50 and 75-25 microm ID coupled capillaries are used. The use of the coupled capillary is also helpful for improving the separation efficiency. Based on the sweeping-MEKC mode, the number of theoretical plates (N) for the detected peaks were determined to be 6.3 +/- 2.7 x 10(5) by means of a single capillary (50 microm ID). This can be improved to 9.4 +/- 3.6 x 10(5) and 9.4 +/- 0.9 x 10(6) when the 100-50 and 75-25 microm ID coupled capillaries were applied.     

The sequential injection system with adsorptive stripping voltammetric detection

Two sequential injection systems have been developed for adsorptive stripping voltammetric measurement. One is for substances adsorbing at mercury, e.g. riboflavin. In this case, a simple arrangement with only sample aspiration is needed. Reproducibility was 3% and detection limit 0.07 μM. The measuring system was applied to determination of riboflavin in vitamin pills and to study the photodegradation process of riboflavin in aqueous solutions. In the second case, metal ions were determined. They have to be complexed before deposition on the mercury surface. Thus, both the sample and the ligand have to be aspirated in the system. In this case, the reproducibility was ≈6% and the detection limit <0.1 ppm for cadmium, lead and copper when complexation with oxine was used. Dimethylglyoxime was used in determination of nickel and cobalt and nioxime complexes were used in determination of nickel and copper. With these complexing agents, the reproducibility was the same as with oxine, but the metals could be determined at concentrations lower than 0.01 ppm. Application of two ligands in a SIA system with AdSV detection was also studied. Simultaneous determination of copper, lead, cadmium and cobalt was possible by using oxine and dimethylglyoxime. Copper and nickel were simultaneously determined by using dimethylglyoxime and nioxime.     

Determination of pyrimethamine in animal tissue and egg by liquid chromatography with fluorescence detection

A sensitive and selective liquid chromatographic (LC) assay was developed to determine the concentration of pyrimethamine in animal tissue and egg by fluorescent derivative. Animal samples were extracted with acetonitrile, centrifuged, and purified by hexane. Fluorescent derivatization was performed by reacting pyrimethamine with chloroacetaldehyde and subjected to LC with fluorescence detection (excitation wavelength 300 nm, emission wavelength 420 nm). The limit of detection was 10 ng/g (10 ppb) and the standard calibration curve was linear in the range of 1-100 ppb (0.01-1 ng/10 microL). Recoveries from samples fortified at levels of 0.1 and 1 ppm (microg/g) were 61.0-77.4 and 65.5-81.2%, respectively. The method was applied to the monitoring of marketed samples. Pyrimethamine was not determined in any of the 70 samples: 20 swine muscle; 20 chicken muscle; 10 chicken liver; and 20 egg.     

Comparison of Programmable versus Single Wavelength Fluorescence for the Detection of Three Fluoroquinolone Antibacterials Isolated from Fortified Chicken Liver Using Coupled On Line Microdialysis and HPLC

A recently introduced programmable fluorescence detector was compared with a single wavelength fluorescence detector for quantification of fluoroquinolone (FQ) antibacterial agents, which have widely varying spectral characteristics. The two detectors were connected in parallel to an HPLC system to test their performance characteristics. With single wavelength detection, two FQs, flumequine and oxolinic acid could be detected at an emission wavelength of 368 nm in a single chromatogram while a third FQ, sarafloxacin, was not observed at that wavelength. Similarly, when the detector was optimized for sarafloxacin emission at 440 nm, the other two compounds were undetected. In contrast, all three FQs were quantified at their individual maxima in a single run using the programmable fluorescence detection. The applicability of an HPLC – programmable fluorescence detector, in combination with on-line microdialysis, also was evaluated using chicken liver fortified at low ppb levels with the three FQs. After on-line microdialysis sample clean up, the resultant HPLC chromatograms were free of background interference enabling the programmable detector to optimize the quantitation of the three analytes in a single run. The limit of quantification (LOQ) determined for each FQ was 1.0 ppb and the limit of detection (LOD) was 0.2 ppb, an order lower in magnitude than was obtainable with single wavelength detection.     

Profiling and screening analysis of 27 aromatic amino acids by capillary electrophoresis in dual modes

An efficient capillary electrophoretic (CE) profiling and screening system based on dual modes of capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MEKC) was developed for the simultaneous determination of 23 nonprotein amino acids (NPAAs) and 4 protein amino acids with aromatic moiety. It involves separation by an uncoated fused-silica capillary under phosphoric acid buffer in CZE mode and by another uncoated fused-silica capillary under neutral sodium dihydrogen phosphate buffer containing sodium dodecyl sulfate in MEKC mode. Migration orders of the amino acids studied on the two separation modes under each optimum condition were very different. The repeatability of migration times measured by the CZE and MEKC was found to be better than 4.8 and 3.4%, respectively, thereby enabling to cross-check the identification of each amino acid. The method linearity and limit of detection of the CZE for each amino acid were found to be adequate for the assay of aromatic amino acids. When the present CE profiling and screening analysis in dual modes was applied to plant seeds, NPAAs such as mimosine from Mimosa pudica Linné, and 2-phenylglycine from Lindera erythrocarpa Makino were positively detected along with tryptophan, phenylalanine and tyrosine.     

In-capillary derivatization and laser-induced fluorescence detection for the analysis of organophosphorus pesticides by micellar electrokinetic chromatography

We developed a rapid and sensitive method using in-capillary derivatization and laser-induced fluorescence (LIF) detection for the fully automated analysis of organophosphorus pesticides (OPPs), including glufosinate, aminomethylphosphonic acid (AMPA) and glyphosate by micellar electrokinetic chromatography (MEKC). The potential of 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) as in-capillary derivatization reagent is described for the first time. The unique feature of this MEKC method is the capillary being used as a small reaction chamber. In in-capillary derivatization, the sample and reagent solutions were injected directly into the capillary by tandem mode, followed by an electrokinetic step to enhance the mixing efficiency of analytes and reagent plugs in accordance with their different electrophoretic mobilities. Standing a specified time for reaction, the derivatives were then immediately separated and determined. Careful optimization of the derivatization and separation conditions allowed the determination of glufosinate, AMPA and glyphosate with detection limits of 2.8, 3.6 and 32.2 ng/mL, respectively. These detection limits were comparable to those of 1.4, 1.9 and 23.8 ng/mL obtained from conventional pre-capillary derivatization. Furthermore, repeatability better than 0.40% for migration time and 3.4% for peak area, as well as shorter migration time, was obtained. The method was successfully applied to the analysis of spiked river water sample with satisfactory results.     

Highly-sensitive micellar electrokinetic chromatographic analysis of dioxin-related compounds using on-line concentration.

An application study of an on-line concentration technique of neutral analytes for micellar electrokinetic chromatography (MEKC) was carried out in environmental analysis to enhance the UV detection sensitivity. Several dioxins and related compounds, such as dibenzofuran, dibenzo-p-dioxin, 2,3- and 2,7-dichlorodibenzo-p-dioxins, and 2,3,7-trichlorodibenzo-p-dioxin, were used as test solutes. For a highly sensitive separation and detection, cyclodextrin-modified MEKC (CD-MEKC) under acidic conditions was employed as a separation mode and stacking using reverse migrating micelles and a water plug (SRW) as an on-line concentration technique. Almost a 200-fold gain in detection sensitivity was obtained for the model compounds in SRW-CD-MEKC compared to that in normal CD-MEKC without on-line concentration and the limit of detection was found to be around 0.1 ppm for each solute.     

Ultratrace determination of adenine in the presence of copper by adsorptive stripping voltammetry

An electrochemical stripping procedure for ultra-trace measurements of adenine is described based on the adsorption of the adenine-copper complex on a static mercury drop electrode. Cyclic voltammetry was used to characterize the interfacial and redox behavior. Optimum experimental conditions were found when using a 0.005 M NaOH solution containing 0.4 ppm of copper, an accumulation potential of -0.30 V, a scan rate of 100 mV s(-1) and a linear scan mode. There is a linear response to adenine concentration in the range of 0.1-1.0 ppb and the detection limit for 6 min accumulation time was of 4.0 ppt (3.0x10(-11) M). Proper conditions for measuring the adenine in presence of guanine, thymine and cytosine were also investigated. The method was applied for the determination of adenine in a sample of single-stranded calf thymus DNA.     

In-capillary derivatization and analysis of ephedrine and pseudoephedrine by micellar electrokinetic chromatography with laser-induced fluorescence detection

This paper describes an automatic rapid approach for in-capillary derivatization of ephedrine (E) and pseudoephedrine (PE) and subsequent sensitive determination of the derivatives by micellar electrokinetic chromatography (MEKC) with laser-induced fluorescence (LIF) detection using 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) as fluorescent reagent. The unique feature of this method is the capillary being used as a small reaction chamber, in which the sample, derivatization buffer and reagent solutions were injected directly into the capillary by tandem mode, followed by an electrokinetic step (5 kV, 15s) to enhance the mixing efficiency of analytes and reagent plugs. Standing a specified time of 1 min for reaction, the derivatives were then immediately separated and determined. Several parameters for in-capillary derivatization and subsequent MEKC separation were systematically investigated. Under these optimized conditions, a baseline separation of the two analytes was achieved within 10 min and the derivatization concentration limits of detection were found to be 4.8 ng mL(-1) for E and 1.6 ng mL(-1) for PE, respectively. The method was validated in terms of precision, linearity, accuracy and successfully applied for the determination of the two alkaloids in ephedra herb and its preparations.     

Analyte focusing by micelle collapse for liquid extraction surface analysis coupled with capillary electrophoresis of neutral analytes on a solid surface

Liquid extraction surface analysis (LESA) has an advantage of directly sampling analytes on a surface, thus avoiding unnecessary dilution by homogenization of the bulk sample commonly practiced in solid sample analysis. By combining LESA with CE, the additional advantage of separating analytes before detection can be accomplished. For neutral molecules, MEKC needs to be used. Since the detection sensitivity of CE in general suffers from the small capillary dimension, analyte focusing by micelle collapse was employed for enhanced extraction in LESA and sample preconcentration for MEKC. In addition, using a commercial CE instrument, the LESA process was performed much faster and more reliably compared to our first demonstration of LESA‐CE using a homemade CE setup. Three neutral water‐insoluble pesticides sprayed on an apple skin were directly extracted, preconcentrated, and analyzed by the automated LESA‐analyte focusing by micelle collapse‐MEKC with high sensitivity in 10 min. The relative standard deviations of the migration times and peak heights were 0.8–2.1 and 1.2–3.0%, respectively when ametryn was used as an internal standard. The limits of detection obtained with UV absorbance at 200 nm were 1.8–6.4 ppb.     

Separation and determination of aminohalogenbenzophenones by high-performance liquid chromatography with electrochemical detection.

A high-performance liquid chromatographic method with electrochemical detection has been developed for the determination of three aminohalogenbenzophenones: 2-amino-2',5-dichlorobenzophenone, 2-amino-5-chlorobenzophenone and 2-amino-5-bromo-2'-fluorobenzophenone, metabolites of benzodiazepinooxazoles and other psychotropic drugs. A mobile phase of methanol-water (65:35), containing 5 mM KH2PO4 appeared to be the optimal when a 4-microns, 60-A Nova-Pak C18 column and a flow-rate of 0.75 ml/min (130 bar) were used. The temperature was optimized at 30 degrees C. The amperometric detector, equipped with glassy carbon electrode, was operated at 1.3 V versus Ag/AgCl in the DC mode. The method was applied to the determination of these compounds at two concentration levels: ppm and ppb (ng/cm3) using 2-amino-5-chlorobenzophenone as internal standard. The limit of determination was 750 pg/ml of biological fluid for each compound, and recoveries greater than 97% were obtained for spiked samples of urine and serum, using C18 Sep-Pak cartridges in the sample clean-up procedure.     

Comparison of HPLC and multivariate regression methods for hydrocortisone and lidocaine analysis of pharmaceutical preparations

A reverse-phase high-performance liquid chromatographic (HPLC) method to determine hydrocortisone acetate, hydrocortisone hemisuccinate and lidocaine is described in this paper. The separation was made in a LichrCART C(18) column using a methanol-NaH(2)PO(4)/Na(2)HPO(4) (0.1 mol L(-1)) (pH=4.5) buffer solution as a mobile phase in isocratic mode (60:40 (v/v)). The mobile phase flow rate and the sample volume injected were 1 mL min(-1) and 20 micro L, respectively. The detection was made with a diode-array detector measuring at the maximum for each compound. Quantification limits ranging from 0.18 to 0.84 micro g L(-1) were obtained when the peak area was measured. The method was applied in pharmaceutical formulations that were compared with those obtained by through multivariate regression spectrophotometry and micellar capillary electrophoresis (MEKC). HPLC results are in accordance with the results obtained by MEKC. The spectrophotometric method was suitable only for synthetic samples.     

Uniformly sized molecularly imprinted polymer for d-chlorpheniramine. Evaluation of retention and molecular recognition properties in an aqueous mobile phase

Rapid separation and determination of mixtures of L-ascorbic acid, nitrite, sulfite, oxalate, iodide and thiosulfate by conventional ion chromatography is often difficult due to incomplete separation of L-ascorbic acid and nitrite from the water peak when using eluents giving short elution times for iodide and thiosulfate. Separation of the six species within about 15 min has been achieved by isocratic elution using a resin-based ion-exchange column with a carbonate eluent containing a trace amount of 1,3,5-benzenetricarboxylic acid (BTA) and fluorescence measurement of cerium(III) formed via postcolumn reactions of the separated sample species with cerium(IV). Calibration plots of peak height versus concentration were linear up to 10.0 microM (1.76 ppm) for L-ascorbic acid, 8.0 microM (0.37 ppm) for nitrite, 8.0 microM (0.70 ppm) for oxalate, 80.0 microM (10.2 ppm) for iodide and 25.0 microM (2.80 ppm) for thiosulfate, whilst the sulfite calibration was linear up to 25.0 microM (2.00 ppm) when peak area was plotted against concentration. Detection limits (defined as S/N = 3) were 18 ppb for L-ascorbic acid, 4 ppb for nitrite, 16 ppb for sulfite, 7 ppb for oxalate, 72 ppb for iodide and 37 ppb for thiosulfate. The proposed method was applied successfully to the determination of L-ascorbic acid, nitrite, sulfite, oxalate, iodide or thiosulfate in water samples.     

Trace elemental analysis of commercial bottled drinking water by a portable total reflection X-ray fluorescence spectrometer.

A portable total reflection X-ray fluorescence spectrometer was applied to commercial bottled drinking water containing 62 ppb (microg/L) V, 7.5 ppm (mg/L) Ca, and 1 ppm K. A dry residue, prepared by repeated pipetting and drying a 20 microL portion of drinking water on a sample holder six times, and another dry residue, prepared by pipetting and drying a 120 microL portion of the drinking water, were measured. The size of the dry residue of the drinking water was reduced by repeating the pipetting and drying. Calcium and potassium were easily detected in these two dry residues. Vanadium was detected in the dry residue prepared by repeated pipetting and drying. Vanadium, calcium, and potassium were quantified by using an internal standard, and the average quantified concentrations of V, Ca, and K were 91 ppb, 8.2 ppm, and 1.5 ppm, respectively. Although these quantified concentrations deviated from the certified concentrations (62 ppb of V, 7.5 ppm of Ca, and 1 ppm of K), it was possible for this portable spectrometer to estimate approximate concentrations.     

Concentration and determination of cotinine in serum by cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography

Micellar electrokinetic chromatography (MEKC), combined with on-line concentration techniques, cation-selective exhaustive injection (CSEI) and sweeping, was developed for the analysis of cotinine, the primary biomarker for exposure to secondhand smoke. Experimental parameters including sample matrix, surfactant concentration, injection length and concentration of high-conductivity buffer, and sample electrokinetic injection time were optimized for electrophoretic enrichment and separation processes. Under the optimal conditions, the detection sensitivity of cotinine was enhanced by about 5000-fold using CSEI-sweeping MEKC compared to normal MEKC. The limit of detection for cotinine was found to be 0.2 ng/mL using ultraviolet absorbance detection. Furthermore, the developed method was successfully applied to the detection of cotinine in mouse serum samples.     

Determination of two oxy-pyrimidine metabolites of diazinon in urine by gas chromatography/mass selective detection and liquid chromatography/electrospray ionization/mass spectrometry/mass spectrometry

An analytical method was developed for the determination in urine of 2 metabolites of diazinon: 6-methyl-2-(1-methylethyl)-4(1H)-pyrimidinone (G-27550) and 2-(1-hydroxy-1-methylethyl)-6-methyl-4(1H)-pyrimidinone (GS-31144). Two of the urine sample preparation procedures presented rely on gas chromatography/mass selective detection (GC/MSD) in the selected ion monitoring mode for determination of G-27550. For fast sample preparation and a limit of quantitation (LOQ) of 1.0 ppb, urine samples were purified by using ENV+ solid-phase extraction (SPE) columns. For analyte confirmation at an LOQ of 0.50 ppb, classical liquid/liquid partitioning was used before further purification in a silica SPE column. An SPE sample preparation procedure and liquid chromatography/electrospray ionization/mass spectrometry/mass spectrometry (LC/ESI/MS/MS) were used for both G-27550 and GS-31144. The limit of detection was 0.01 ng for G-27550 with GC/MSD, and 0.016 ng when LC/ESI/MS/MS was used for both G-27550 and GS-31144. The LOQ was 0.50 ppb for G-27550 when GC/MSD and the partitioning/SPE sample preparation procedure were used, and 1.0 ppb for the SPE only sample preparation procedure. The LOQ was 1.0 ppb for both analytes when LC/ESI/MS/MS was used.