Sorption and Textural Properties of Activated Carbon Derived from Charred Beech Wood

The aim of this study was to prepare activated carbon materials with different porous structures. For this purpose, the biomass precursor, beech wood, was carbonized in an inert atmosphere, and the obtained charcoal was physically activated using carbon dioxide at 1273 K. Different porous structures were obtained by controlling the time of the activation process. Prepared materials were characterized in terms of textural (N₂ sorption at 77 K), structural (XRD), and sorption properties (CO₂, C₂H₄, C₄H₁₀). The shortest activation time resulted in a mostly microporous structure, which provided a high sorption of CO₂. Increasing the activation time led to an increasing of the pores’ diameters. Therefore, the highest ethene uptake was obtained for the material with an intermediate activation time, while the highest butane uptake was obtained for the material with the highest activation time.     

A sulfonated capillary that gives reproducible migration times for capillary zone electrophoresis and micellar electrokinetic chromatography

To obtain reproducible migration times and rapid analyses of analytes, sulfonate groups were chemically introduced to the inner wall of untreated fused-silica capillary with 2-(4-chlorosulfonylphenyl)ethyltrichlorosilane. The sulfonated capillary showed relatively constant electroosmotic mobility which was greater than that obtained by an untreated fused-silica capillary over the pH range studied (pH 2-9). In both CZE and MEKC, the RSDs of the migration times of analytes with the sulfonated capillary were less than 0.2% which were significantly lower than those obtained with an untreated fused-silica capillary (0.5-3.5%). When BGE were set at pH 7.0 for CZE and MEKC, the analysis times with the sulfonated capillary were about half those obtained with an untreated fused-silica capillary. These results indicate that the sulfonated capillary can provide highly reproducible and rapid analyses in CE.     

Thermodynamics of Solvent Extraction of Rare and Scattered Metal-Indium with Diethylhexylmonothiophosphoric Acid

IntroductionIndium has been widely used in electronic indus-try,butin nature itcoexists with other metals instead ofexisting as a single mine.Among all the methods avail-able,extraction is the most effective one for abstractingindium.However,it is challen…     

Synthesis of 2-aminoquinazolines from ortho-fluorobenzaldehydes

The reaction of guanidine carbonate with various ortho-fluorobenzaldehydes in N,N-diinethylacetamide was investigated as a potential route for preparing 2-aminoquinazolines. Eleven new 2-aminoquinazolines were elaborated in this manner in low to moderate yields. In general the best results were obtained with ortho-fluorobenzaldehydes possessing an electron withdrawing substituent at the other ortho position. Complex mixtures were obtained using 2-fluorobenzaldehyde, 2,5-difluorobenzaldehyde and 2-fluoro-5-methoxybenzaldehyde which were not resolved.     

How room-humidity during the coating affects the structural,optical and photocatalytic properties of TiO<Subscript>2</Subscript> films

TiO₂ thin films were obtained on glass slide substrates by the sol–gel technique. The substrates were coated by the immersion-removal method, at a constant withdrawal speed. The TiO₂ precursor solution and the substrate were maintained in a closed box with a controlled relative humidity (RH) during the removal of the substrate. The RH was varied in the 30–90% range in steps of 20%. The films were dried and after that sintered in an open atmosphere. The effect of the RH was studied on the structural, optical and photocatalytic properties. The films are polycrystalline with an anatase phase and show a high optical transmission in the UV–Vis range. The photocatalytic activity was evaluated by the photobleaching of methylene blue in an aqueous solution. The best photocatalytic activity was obtained for the films with 90% RH, this fact is mainly attributed to the highest porosity value obtained for these films.     

The Heck synthesis of β-arylated ketones catalyzed by palladium immobilized on functional polysiloxane microspheres

Palladium catalysts, obtained by the impregnation of Pd(OAc)₂ on aminopropyl- or pyridine-functionalized polysiloxane microspheres, were used in the Heck reaction of iodobenzene with 3-buten-2-one and 3-buten-2-ol at 120°C using an oil bath or microwave heating. The synthesis of 4-phenyl-3-buten-2-one was one-step arylation of ketone while 4-phenyl-2-butanone was formed in two-step arylation–isomerization sequential transformation of alcohol. A very low palladium loading, 0.05 mol%, was sufficient to obtain a yield of ketones higher than 90%. In recycling experiments, an effect of the functional group present in polysiloxane was observed and much better results were obtained for the aminopropyl-modified polymer. The catalyst was easily retrieved and reused in eight consecutive runs in the reaction of 3-buten-2-one, while with 3-buten-2-ol 11 subsequent cycles were performed with practically the same yield.     

Reaction of 1‐benzoselenopyrylium salts with grignard reagents: Formation of 2,4‐disubstituted selenochromenes and their conversion into the corresponding 1‐benzoselenopyrylium salts

Treatment of 2‐tert‐butyl‐1‐benzoselenopyrylium salts 1A and 2‐phenyl‐1‐benzoselenopyrylium salts 1B with an alkyl(phenyl)magnesium halide resulted in nucleophilic addition at the C‐4 position to give the corresponding 2,4‐disubstituted 4H‐selenochromenes 2A and 2B in good yields, respectively. The obtained selenochromenes 2 were then easily converted into the 4‐substituted 2‐tert‐butyl‐1‐benzoselenopyrylium salts 6A by treatment with triphenylcarbenium tetrafluoroborate in high yields. The 4‐substituted 2‐phenyl derivatives 6B were also obtained in a similar manner. The reaction of the unsubstituted 1‐benzoselenopy‐rylium salt 1C with an alkylmagnesium halide is also described.     

Natural pyrite as an electrochemical sensor for potentiometric titrations with EDTA, mercury(II) and silver(I)

The results obtained in potentiometric titrations of copper(II), mercury(II) and iron(III) with standard EDTA solutions are presented. The titration of copper(II) at pH values in the range from 8.11 to 10.99 (ammonia buffer) and the titration of mercury(II) and iron(III) at pH values from 3.59 to 5.65 (acetate buffer) were performed. The titration end-point (TEP) was detected with an indicator electrode made from natural crystalline pyrite as an electrochemical sensor. The results obtained in potentiometric titration with the pyrite electrode were compared with those obtained using a platinum electrode (Fe³⁺), a Cu ion selective electrode (Cu²⁺) and a Hg electrode (Hg²⁺). Accurate and reproducible results with good agreement were obtained, but higher potential changes at the TEP were obtained using the pyrite electrode. In the course of the titration the potential was established within less than 1 min, whereas at the TEP it was within about 2–3 min. The potential changes at the TEP were in the range from 60 to 200 mV per 0.1 ml EDTA, according to the stability constant of the complex formed. The highest potential changes, ranging from 160 to 200 mV, were obtained in the titration of iron(III) at pH 3.59. Reverse titration was also performed and accurate and reproducible results were obtained. Moreover, titration of halogenide and thiocyanate with standard mercury(II) solutions, as well as cyanide with silver(I) solution, were performed and accurate and reproducible results were again obtained. Received: 20 February 1998 / Accepted: 19 November 1999     

New Fe4, Fe6, and Fe8 clusters of iron(III) from the use of 2-pyridyl alcohols: structural, magnetic, and computational characterization

The syntheses, crystal structures, magnetochemical characterization, and theoretical calculations are reported for three new iron clusters [Fe 6O 2(NO3) 4(hmp) 8(H 2O) 2](NO3)2 (1), [Fe4(N3)6(hmp)6] (2), and [Fe8O3(OMe)(pdm)4(pdmH) 4(MeOH)2](ClO4)5 (3) (hmpH=2-(hydroxymethyl)pyridine; pdmH2=2,6-pyridinedimethanol). The reaction of hmpH with iron(III) sources such as Fe(NO3) 3.9H2O in the presence of NEt 3 gave 1, whereas 2 was obtained from a similar reaction by adding an excess of NaN3. Complex 3 was obtained in good yield from the reaction of pdmH 2 with Fe(ClO4)3.6H2O in MeOH in the presence of an organic base. The complexes all possess extremely rare or novel core topologies. The core of 1 comprises two oxide-centered [Fe3(mu3-O)](7+) triangular units linked together at two of their apexes by two sets of alkoxide arms of hmp(-) ligands. Complex 2 contains a zigzag array of four Fe (III) atoms within an [Fe4(mu-OR) 6](6+) core, with the azide groups all bound terminally. Finally, complex 3 contains a central [Fe 4(mu4-O)](10+) tetrahedron linked to two oxide-centered [Fe3(mu3-O)](7+) triangular units. Variable-temperature, solid-state dc and ac magnetization studies were carried out on complexes 1-3 in the 5.0-300 K range. Fitting of the obtained magnetization versus field (H) and temperature (T) data by matrix diagonalization and including only axial anisotropy (zero-field splitting, ZFS) established that 1 possesses an S=3 ground-state spin, with g=2.08, and D=-0.44 cm(-1). The magnetic susceptibility data for 2 up to 300 K were fit by matrix diagonalization and gave J1=-9.2 cm(-1), J2=-12.5 cm(-1), and g=2.079, where J 1 and J 2 are the outer and middle nearest-neighbor exchange interactions, respectively. Thus, the interactions between the Fe(III) centers are all antiferromagnetic, giving an S=0 ground state for 2. Similarly, complex 3 was found to have an S=0 ground state. Theoretically computed values of the exchange constants in 2 were obtained with DFT calculations and the ZILSH method and were in good agreement with the values obtained from the experimental data. Exchange constants obtained with ZILSH for 3 successfully rationalized the experimental S = 0 ground state. The combined work demonstrates the ligating flexibility of pyridyl-alcohol chelates and their usefulness in the synthesis of new polynuclear Fex clusters without requiring the copresence of carboxylate ligands.     

Ortho-selective direct cross-coupling reaction of 2-aryloxazolines and 2-arylimidazolines with aryl and alkenyl halides catalyzed by ruthenium complexes

The ortho position of the aromatic ring in 2-aryloxazolines and 2-arylimidazolines is selectively arylated and alkenylated with organic halides in the presence of a ruthenium(II)-phosphine complex. In the case of unsubstituted and para-substituted phenyloxazolines, 1:2 coupled products were obtained preferentially, while 1:1 coupled products were obtained in the case of meta-substituted phenyloxazolines and N-acylarylimidazolines. The reaction is proposed to proceed via the generation of an organoruthenium intermediate, formed by oxidative addition of the organic halide, and ortho-ruthenation directed by the coordination of the 2-oxazolinyl or 2-imidazolinyl group to the ruthenium center.     

Automated SIA System Using an Array of Potentiometric Sensors for Determining Alkaline‐Earth Ions in Water

This work deals with the simultaneous determination of Mg²⁺, Ca²⁺, and Ba²⁺ in water using a PVC‐membrane potentiometric sensor array and multivariate calibration, in what is known as electronic tongue. The subsequent processing of the data was based on the use of a multilayer artificial neural network (ANN). The information needed for training or generation of the model was obtained with the aid of an automated analytical system based on the Sequential Injection Analysis (SIA) technique. The modeling ability was verified with an external set of standards, and next the determinations were performed in real samples of mineral waters, where close results for Mg²⁺ and Ca²⁺ were obtained to those obtained with reference methods. The determination of Ba²⁺ can be considered as semi‐quantitative for synthetic samples – due to the absence of Ba²⁺ in mineral waters, its concentration in real samples was not measured.     

Regio- and stereoselective reactions of gem-difluorinated vinyloxiranes with heteronucleophiles

[Reaction: see text]. Regio- and stereoselectivity in reactions of gem-difluorinated vinyloxiranes with heteronucleophiles were successfully controlled. Halogen atoms were introduced regioselectively at the allylic epoxide carbon with an inversion in stereochemistry using MgBr2*Et2O or Li2CuCl4 to produce anti-vic-halohydrine. The other diastereomers were obtained selectively using LiBr/AcOH or BCl3, and SN2' type products were formed selectively with excellent E preference by changing the reaction temperature. Moreover, a further investigation led us to find that a regio- and stereoselective SN2' addition of several Brnsted acids was dependent on the pKa values of the acids. Under strong acidic conditions, we exclusively obtained E allylic alcohols.     

聚(4-乙烯基吡啶)诱导一步法合成纺锤形钨酸钡晶体

利用高分子量的含氮杂环聚合物聚(4-乙烯基吡啶)(P4VP)作为模板合成了纺锤形钨酸钡晶体,为制备形貌可控的钨酸钡晶体提供了一种简单、条件温和、容易控制的方法.用扫描电镜、透射电镜及X-射线衍射等手段研究了钨酸钡晶体的晶型及形貌.并讨论了P4VP的浓度、溶液离子浓度、pH值等因素对钨酸钡晶体形貌的影响.     

SYNTHESIS OF SODALITE BY DRY POWDER METHOD

用新颖的干粉方法合成系列沸石的研究已从五元环沸石延伸到具有四元环和六元环的方钠石。本研究运用干粉方法在Ｎａ２Ｏ－ＳｉＯ２－Ａｌ２Ｏ３混合物中分别以乙醇胺和乙二胺－氟化物为模板，合成出了方钠石。有机模板剂以吸附态模板方式进入体系。用ＸＲＤ数据、扫描电镜图及红外光谱测试结果对实验产品做了表征。结果表明，干粉体系制备的方钠石的晶胞参数小于水热体系和非水体系合成的方钠石的相应值。而以乙醇胺为模板制备的方钠石与以乙二胺－氟化物为模板的样品比较，后者具有较快的晶化速度、较小的晶胞体积和晶粒     

Cu（OTf）2催化苄基卤代物与三丁基烯丙基锡的偶联反应

研究了苄基卤代物与三丁基烯丙基锡的偶联反应,当以10mol%Cu(OTf)2为催化剂,CH2Cl2为溶剂时,1-氯甲基-4-苯基萘与三丁基烯丙基锡于室温反应1h,交叉偶联反应产物1-(3-丁烯基)-4-苯基萘(3b)收率即达93%.结果表明,芳环含供电子基的底物反应活性较高,在室温反应几分钟即可完成,而芳环含吸电子基的底物反应活性低.反应产物3b,1-溴-4-(3-丁烯基)萘(3c)和1-(3-丁烯基)-4-硝基萘(3f)未见报道,且其结构经表征确认.     

Fabrication of CuInS2 films from electrodeposited Cu/In bilayers: effects of preheat treatment on their structural, photoelectrochemical and solar cell properties

Polycrystalline CuInS(2) films were fabricated by sulfurization of electrodeposited Cu and In metallic precursor films in a Cu-rich composition at 520 °C in H(2)S (5% in Ar). Structural analyses revealed that the adherence of the thus-formed CuInS(2) film to the Mo substrate was strongly dependent on heating profiles of the Cu/In bilayer film: a CuInS(2) film with poor adherence having many crevices was formed when the Cu/In bilayer film was heated monotonously from room temperature to 520 °C in Ar within 25 min followed by sulfurization, whereas CuInS(2) films with good adherence were obtained when the Cu/In films were pretreated at 110 °C in Ar for 10-60 min just before increasing the temperature up to 520 °C for sulfurization. It was also clarified that the CuInS(2) film obtained without 110 °C pretreatment had pinholes inside the film, whereas the CuInS(2) films formed after 110 °C pretreatment showed no notable pinholes. Photoelectrochemical responses of these CuInS(2) films in an electrolyte solution containing Eu(III) indicated that the CuInS(2) films obtained after 110 °C pretreatment had higher external quantum efficiency (EQE) values than those of films obtained without 110 °C pretreatment, mainly due to better adherence of 110 °C pretreated CuInS(2) films to the Mo substrate than the CuInS(2) film obtained without 110 °C pretreatment. The performance of solar cells with an Al:ZnO/Zn(S,O)/CdS/CuInS(2)/Mo structure also depended on the structural characteristics of the CuInS(2) films, i.e., preliminary conversion efficiencies of ca. 5% were obtained for devices based on the CuInS(2) films obtained after 110 °C pretreatment, whereas the device prepared by the CuInS(2) film without 110 °C pretreatment showed the conversion efficiency less than 1.5%.     

Polymer Catalysts

Catalysts of reduced and unreduced PdCl₂ with hydrazine hydrate deposited on polyaminochloroquinones or polyaminochlorohydroquinones were obtained. Polyaminochloroquinones were prepared by solution polycondensation of chloranil with benzidine in the presence of an acceptor, sodium acetate, for the resulting hydrochloric acid. Polyaminochlorohydroquinones were obtained by a reduction reaction of polyaminochloroquinones with 2,2′ -diphenyl hydrazine. The polymer catalysts were tested in the styrene hydro-genation reaction. The polymers and polymer catalysts were studied by IR spectroscopy.     

Novel Redox-Active Cyclophanes Based on 3,3'-Biindolizines: Synthesis and Chirality

The first compounds of a new series of redox-active cyclophanes were prepared by dehydrocyclization of bridged indolizines of type 1. The bridged dipyridino-compounds 2a and 2b obtained by reaction of 2 mol of lithiated alpha-picolines with dihalides were used as starting materials. Subsequent treatment of 2a,b with 2 mol of alpha-bromo ketones gave quaternary pyridinium halides. Ring closure in an alkaline medium (Chichibabin reaction) yielded the starting material for the synthesis of the macrocycles. Oxidative C-C coupling gave the diastereomeric cyclophanes of type 3. In all cases one pair of the enantiomers was obtained in excess. CV-investigations have shown that the main products are reversible redox systems. To clarify their conformations, compounds 3c, 3d/1, and3d/2 were subjected to X-ray analysis.     

Synthesis of substituted thieno[2,3-d]thiazoles and indolo[3,2-d]thiazoles

Alkylene-, halo-, and aryl-substituted 2-methylthieno[2,3-d]thiazoles were obtained by the action of phosphorus pentasulfide on the corresponding 2-acetylamino-3-bromo- or 2-acetylamino-3-hydroxythiophenes in an organic solvent with heating. 2-Oximes of halo- and methyl-substituted isatins were converted by reduction and acylation into 2-hydroxy-3-acetylaminoin-doles, from which 2-methylindolo[3,2-d]-thiazoles were obtained by the action of phosphorous pentasulfide with heating in xylene.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 410–417, March, 1987.     

Rhodium-catalyzed enantioselective [2+2+2] cycloaddition of diynes with unfunctionalized alkenes

A chiral rhodium complex catalyzed an enantioselective [2+2+2] cycloaddition of unsymmetrical diynes with norbornene, and tetracyclic products were obtained in good to excellent ee. The cycloaddition of a symmetrical diyne with styrene derivatives as coupling partners gave bicyclic products in good ee.