LaF3纳米片和棒束的选择性合成及表征

室温条件下,以简单的液相法,通过改变氟源NaBF4和K2SiF6,制得不同形貌的LaF3纳米晶(片及棒束).X射线衍射(XRD)结果显示所得的2种不同形貌的产物均为结晶良好的六方相LaF3.场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)结果表明由NaBF4制得大量均匀、厚度约为20 am的六边形纳米片....     

一维纳米Co_3O_4,Ag/Co_3O_4及CuO/Co_3O_4的合成与电催化性能(英文)

采用水热合成法制备了Co3O4及复合Ag/Co3O4、CuO/Co3O4一维纳米产品。用XRD,FE-SEM和TEM手段对产品进行了表征。采用循环伏安法研究了合成产品修饰的玻碳电极在碱性溶液中对对硝基苯酚的电催化还原性能。与裸玻碳电极相比,1mmol·L-1的对硝基苯酚在用Co3O4、特别是CuO/Co3O4修饰的玻碳电极上还原的峰电流明显增大,用Ag/Co3O4(Ag/Co原子比分别为1∶5和2∶5)修饰的玻碳电极催化还原对硝基苯酚时,尽管还原峰电流增大不是太大,但其峰电位明显降低(分别降低0.265和0.371V)。     

在离子液/水体系中超声合成MoO_3纳米棒及其表征(英文)

采用超声波的方法在离子液(1-丁基-3-甲基氯代咪唑盐离子液,[BMIM]Cl)中合成了直径分布在80~150 nm的MoO3纳米棒.采用X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)和选区电子衍射(SAED)对所合成材料的微观结构和形貌进行了表征.此外,考察了反应时间、加入[BMIM]Cl的量以及其它咪唑基离子液对产物的影响并提出了可能的反应机理.最后对在不同温度煅烧下所得的α-MoO的甲烷催化燃烧活性进行了表征.     

湿化学法合成LiNi_(1/3)Mn_(1/3)Co_(1/3)O_2及其表征(英文)

利用琥珀酸为鳌合剂的湿化学法成功合成了一系列锂离子电池正极材料LiNi1/3Mn1/3Co1/3O2,在合成过程中改变琥珀酸与金属离子摩尔比(R)并研究了这一参数对合成LiNi1/3Mn1/3Co1/3O2材料物理及电化学性质的影响.采用热重、X射线衍射、Rietveld精修、扫描电镜以及超导量子干涉仪对反应机理、材料的结构、形貌以及磁学性质进行了详细表征.得到最佳合成条件为R=1,此时LiNi1/3Mn1/3Co1/3O2的阳离子混排度最低.此外,通过Rietveld精修得到该材料阳离子混排度的结果与通过磁学方法得到的结果定量相符,如对于在R=1条件下合成的样品,Rietveld精修结果显示其阳离子混排度为1.85%,而超导量子干涉仪的测试结果为1.80%.当充放电区间为3.0-4.3V,电流密度为0.2C(1C=160mA·g-1)时,该样品的首次放电容量为161mAh·g-1,库仑效率为93.1%,经过50次循环后,容量保持率可达91.3%.     

纳米片聚结Co_3O_4微球催化甲苯燃烧（英文）

采用乙二胺辅助的水热法制备了纳米片聚结的Co3O4微球.利用多种分析技术表征了其物化性质,并评价了其对甲苯燃烧的催化活性.结果表明,由添加1.0 ml乙二胺经140°C水热处理12 h后制得的Co3O4样品呈纳米片聚结的微球状表面形貌.Co3O4微球样品的比表面积约为66 m2g-1.与体相Co3O4样品相比,Co3O4微球样品具有较高的氧吸附物种浓度和较好的低温还原性.当空速为20000 ml g-1h-1时,在Co3O4微球样品上甲苯转化率达到50%和90%时的反应温度分别为230和254°C.这与该样品具有较大的比表面积、较高的氧吸附物种浓度和较好的低温还原性相关.     

Fe_3O_4纳米棒和Fe_2O_3纳米线的热氧化制备与表征

以铁单质和草酸溶液为原料,将0.75mol/L的草酸溶液滴在铁片上,于空气中200~600℃范围内加热1h,制备了Fe3O4纳米棒和Fe2O3纳米线,用扫描电镜(SEM)、X射线衍射仪(XRD)和透射电子显微镜(TEM)对产物进行表征,并研究了反应温度对产物形貌的影响.结果表明,在200~500℃下空气中反应1h在铁片上直接生长出矩形截面的多晶的立方相Fe3O4纳米棒,其直径范围约为0.5~0.8μm.当反应温度为600℃,得到的产物为六方相的Fe2O3纳米线.研究表明,C2H2O4对纳米棒的形成起关键作用,并提出了可能生长机理.     

锂离子电池负极复合材料Al-Co_3O_4的合成及其电化学性能(英文)

采用流变相反应与热处理相结合的方法合成了锂离子电池用Al-Co3O4负极复合材料;利用充放电循环试验测定了复合材料的电化学性能;利用X射线衍射仪、扫描电镜及粒度分布仪分析了复合材料的微结构,考察了Co3O4含量、热处理温度及循环电压范围对复合材料电化学性能的影响;同时探讨了Co3O4纳米微粒在复合材料充放电过程中的作用机理.结果表明,在Al-Co3O4复合材料中,铝基体表面被Co3O4纳米颗粒所包覆;不同组成的复合材料电极的充放电循环性能均优于纯铝电极.     

草酸沉淀法合成自组装纳米Co_3O_4及性质

<正>一维纳米材料具有高比表面积,表现出很多奇特的物理和化学性能,因此一维纳米材料的合成和性质引起了人们的广泛关注。目前,合成一维纳米氧化物的方法很多,如模板法合成一维纳米铁氧体、水热法合成γ-MnOOH纳米棒、静电纺丝法合     

Pd/Co_3O_4纳米颗粒负载于Al_2O_3纳米片高效催化甲烷燃烧（英文）

我们报道了一种Pd/Co_3O_4纳米颗粒负载于Al_2O_3纳米片的三元催化剂催化甲烷的高效燃烧。其中,Pd/Co_3O_4负载于碱性氧化铝的复合材料活化甲烷C―H键的能力比Si O_2、Zr O_2和Ce O_2以及酸性和中性Al_2O_3为载体时更强,这是因为Pd/Co_3O_4/碱性Al_2O_3拥有更多的氧空穴和吸附氧,对催化剂催化甲烷燃烧有较好的影响。尽管在5%(体积分数)的水蒸气存在下,其催化性能有一定的失活,但在移除水蒸气时,其催化性能可以快速恢复至最佳状态。在模拟真实汽车尾气的氛围下,Pd/Co_3O_4/碱性Al_2O_3依然具有较好的催化甲烷燃烧性能,在400℃时可以催化甲烷完全转化。     

聚苯胺/Co_(0.5)Zn_(0.5)Fe_2O_4纳米复合材料的制备及电磁性能

采用高分子凝胶法制备尖晶石型Co0.5Zn0.5Fe2O4,原位聚合法制备纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4纳米复合材料.使用傅立叶红外光谱(FTIR)、紫外可见吸收光谱(UV-Vis)、X射线衍射仪(XRD)和透射电子显微镜(TEM)对复合材料进行了表征.FTIR和XRD的结果表明样品为纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4.UV-Vis光谱表明聚苯胺/Co0.5Zn0.5Fe2O4苯环上的π-π*和n-π*分别红移了23nm和5nm.TEM照片可知,聚苯胺和聚苯胺/Co0.5Zn0.5Fe2O4粒子的平均粒径分别约为50nm和70nm.在8.2～12.4GHz测试频率范围内,聚苯胺/Co0.5Zn0.5Fe2O4的ε″数值在9.2～12.3之间,u″数值在0.15～0.16之间;聚苯胺/Co0.5-Zn0.5Fe2O4介电损耗低于纯聚苯胺,而磁损耗高于纯聚苯胺.     

多层多孔Co3O4纳米粒子组装体的合成、表征和电化学性能研究

利用十二烷基磺酸钠(SDS)作为表面活性剂,合成了形貌化的CoC₂O₄配合物前驱物,然后在500 ℃下热分解形貌化的前驱物,得到了多层多孔Co₃O₄纳米粒子组装体。采用FESEM、TEM、HRTEM、XRD、N₂吸附脱附和Raman散射等手段对产物进行了分析和表征。低角XRD,TEM和N₂吸附脱附测试表明所得组装体具有多孔结构。常规XRD、HRTEM和Raman结果证明组装体中Co₃O₄纳米粒子建筑块结晶较好。与体相Co₃O₄晶体相比,Co₃O₄纳米粒子组装体的5个拉曼活性峰发生了明显的红移。将Co₃O₄纳米粒子组装体作为锂离子电池的正极材料进行了电化学性能测试,结果表明该组装体电极的首次放电容量为1 115 mAh·g^-1,远高于目前文献报道的Co₃O₄纳米管、纳米粒子和纳米棒电极。但是,该组装体电极的循环性能不好,有待进一步提高。     

Magnetic Co3O4 nanowires,preparation and properties

The Co₃O₄ nanowires have been successfully synthesized via modified template method.The as-prepared products have been characterized by EDS,TEM and HRTEM analysis.The magnetic behavior of it is investigated by a magnetic property measurement system.The nanowires exhibit some novel magnetic properties,which are different from its bulk material.The temperature dependence curves of magnetization in zero-field-cooling and field-cooling exhibit two peaks of antiferromagnetic at blocking temperature of～23 K and～31 K,respectively.The field dependent M（H） curves of the Co₃O₄ nanowires at T = 5 and 300 K both exhibit PM properties.Moreover,the diameter of nanowires is hence determined according to the finite size effect as approximately 7-11 nm,in consistent with the characterizations by HRTEM.     

Synthesis of morphology-controllable mesoporous Co3O4 and CeO2

Recently, extensive works have been devoted to the morphology control of mesoporous materials with respect to their use in various applications. In this paper, we used two kinds of mesoporous silica, SBA-15 rods and spheres as hard templates to synthesize morphology-controllable mesoporous metal oxides. By carefully controlling the loading of metal precursors in the mesopores of the hard template, mesoporous Co₃O₄ and CeO₂ with different morphologies, such as micrometer-sized rod, hollow sphere, saucer-like sphere, and solid sphere were conveniently obtained. The structural properties of these materials were characterized by XRD, BET, SEM and TEM. In addition, it is found that the differences observed in the textural properties of the two mesoporous metal oxides nanocasted from the same template can be attributed to the properties of metal precursors and the interaction between metal oxide and SiO₂. Thus-obtained mesoporous metal oxides with such special morphologies may have a potential application in the field of environmental catalytic oxidation.     

溶剂热法合成纳米立方状Co3O4及其电容特性研究

以聚乙二醇为分散剂，在水-正丁醇体系中采用溶剂热法合成纳米立方状Co₃O₄。采用IR、XRD和TEM等手段对前驱物及产物的物相和形貌进行表征，对溶剂热法合成Co₃O₄的反应机理进行初步研究，并以Scherrer公式计算出样品平均晶粒尺寸为21.6 nm。通过循环伏安、恒流充放电、交流阻抗等测试对Co₃O₄电极的电化学性能进行表征。结果表明，在2 mol·L^{-1相似文献}   

Co3O4纳米线的丙三醇辅助合成及其电化学性质

以硝酸钴和丙三醇为反应物通过反应条件的改变控制制备出Co3O4纳米线.利用粉末X射线衍射(XRD),扫描电子显微镜(SEM)和透射电子显微镜(TEM)对产物的形貌与结构进行了表征.实验发现,在低扫描速率下,Co3O4纳米线电极的循环伏安(CV)曲线呈现出两对氧化还原峰.恒电流充放电实验中,氧化钴纳米线电极在1A.g-1电流密度下的电容为163F.g-1;在1和4A.g-1条件下,其容量随循环次数的增加先上升后下降,1000次充放电循环后容量保持率分别在98%和80%以上,继续增加循环次数则容量下降比较明显.锂离子电池性质测试中,氧化钴纳米线的放电容量为1124mAh.g-1,然而放电容量随循环次数增加下降较快.基于实验结果,对Co3O4纳米线的形成机理及其结构与电化学性质之间的关系进行了探讨.     

纳米Co3O4的制备、 表征及CO低温催化氧化

Various nanometer Co₃O₄ samples were prepared and the catalytic performance of CO oxidation were examined. It was found that the activities of the catalysts were greatly changed with variation of the preparation methods and pretreatment conditions. Among the samples tested, Co₃O₄ prepared by using dodecylbenzene sulfonic acid sodium salt(DBS) as the surfactant, calcined at 300 ℃ showed the highest activity and it was able to oxidize completely CO even at -78 ℃. Characterization of these samples by XRD and BET means showed that the catalytic acitivity increased with the decrease of the average particle size, suggests that the average particle size of nanometer Co₃O₄ samples is the main controlling factor of the catalytic activity.     

Catalytic decomposition of H2O2 on Co3O4 doped with MgO and V2O5

The effects of doping of Co₃O₄with MgO (0.4–6 mol%) and V₂O₅ (0.20–0.75 mol%) on its surface and catalytic properties were investigated using nitrogen adsorption at −196°C and decomposition of H₂O₂ at 30–50°C. Pure and doped samples were prepared by thermal decomposition in air at 500–900°C, of pure basic cobalt carbonate and basic carbonate treated with different proportions of magnesium nitrate and ammonium vanadate. The results revealed that, V₂O₅ doping followed by precalcination at 500–900°C did not much modify the specific surface area of the treated Co₃O₄ solid. Treatment of Co₃O₄ with MgO at 500–900°C resulted in a significant increase in the specific surface area of cobaltic oxide. The catalytic activity in H₂O₂ decomposition, of Co₃O₄ was found to suffer a considerable increase by treatment with MgO. The maximum increase in the catalytic reaction rate constant (k) measured at 40°C on Co₃O₄ due to doping with 3 mol% MgO attained 218, 590 and 275% for the catalysts precalcined at 500, 700 and 900°C, respectively. V₂O₅-doping of Co₃O₄ brought about a significant progressive decrease in its catalytic activity. The maximum decrease in the reaction rate constant measured at 40°C over the 0.75 mol% V₂O₅-doped Co₃O₄ solid attained 68 and 93% for the catalyst samples precalcined at 500 and 900°C, respectively. The doping process did not modify the activation energy of the catalyzed reaction but much modified the concentration of catalytically active constituents without changing their energetic nature. MgO-doping increased the concentration of CO³⁺–CO²⁺ ion pairs and created Mg²⁺–CO³⁺ ion pairs increasing thus the number of active constituents involved in the catalytic decomposition of H₂O₂. V₂O₅-doping exerted an opposite effect via decreasing the number of CO³⁺–CO²⁺ ion pairs besides the possible formation of cobalt vanadate.     

Co3O4空心球的简易合成及其电化学性能

通过简易的水热法"一锅"制备了Co3O4空心球。借助X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和傅里叶变换红外光谱法(FTIR)等对Co3O4的结构和形貌进行了表征。结果表明,产物由Co3O4纳米粒子构成,并形成明显的空心多孔结构。循环伏安法(CV)测试表明,所制得的Co3O4空心球呈现良好的电化学性能。本文同时对Co3O4空心球结构的形成过程和可能的机理进行了分析和讨论。