ZSM-5表面酸性的CLD改性及其对择形催化性能的影响

为了获得分子筛催化反应中所需产物的高择形催化选择性,往往必须消除分子筛外表面酸性和减少孔道开口尺寸.目前,各种改性方法已被用于提高ZSM-5的选择性,例如金属、非金属化合物的浸渍,化学气相硅沉积(SiO2-CVD)和预结焦处理等1.虽然采用大分子有机物可以消除分子筛外表面的酸性位,但这种改性在反应条件下尤其在高的反应温度下是不稳定的2.……     

Finely Controlled Platinum Nanoparticles over ZnO Nanorods for Selective Hydrogenation of 3-Nitrostyrene to 3-Vinylaniline

Metallic platinum nanocatalysts play a key role in the liquid-phase selective hydrogenation of substrates with more than one unsaturated bond. However, the commonly applied explanation for the effects of different electronic and geometric properties of catalysts on reactions remains of a heuristic nature due to the difficulties involved in preparing catalysts with precise structure. In this work, we have directly loaded pre-synthesized metallic platinum nanoparticles onto well-structured ZnO nanorods and then subjected them to thermal treatment in a reductive atmosphere for different temperatures. The effects of the different electronic and geometric properties of the catalysts on the selective reduction of 3-nitrostyrene to 3-vinylaniline as a model reaction have been rigorously explored through an analysis of the catalyst structures and the activity and selectivity profiles. Both the electron transfer from zinc to platinum and the decreased platinum surface density as a result of the formation of PtZn intermetallic compounds are key factors for improving the selectivity for the desired 3-vinylaniline. Azobenzene was detected in the reaction with all the Pt/ZnO catalysts after 10–90 min, which indicates that the reaction follows a condensation mechanism.     

Shape-Selective Alkylation of Isopropylnaphthalene over HM Zeolite. A Theoretical Study

A first principle quantum chemical method for determining the shape of molecules has been elaborated and its value in interpreting the experimentally found shape selectivity in isopropylation of isopropylnaphthalene on H-mordenite zeolite is demonstrated. In line with experimental results, it is found that 2,6-diisopropylnaphthalene is the most feasible product since it diffuses through the main channels of mordenite the easiest among the possible isomers.     

Selective Amplification of CO Bond Hydrogenation on Pt/TiO2: Catalytic Reaction and Sum‐Frequency Generation Vibrational Spectroscopy Studies of Crotonaldehyde Hydrogenation

The hydrogenation of crotonaldehyde in the presence of supported platinum nanoparticles was used to determine how the interaction between the metal particles and their support can control catalytic performance. Using gas‐phase catalytic reaction studies and in situ sum‐frequency generation vibrational spectroscopy (SFG) to study Pt/TiO₂ and Pt/SiO₂ catalysts, a unique reaction pathway was identified for Pt/TiO₂, which selectively produces alcohol products. The catalytic and spectroscopic data obtained for the Pt/SiO₂ catalyst shows that SiO₂ has no active role in this reaction. SFG spectra obtained for the Pt/TiO₂ catalyst indicate the presence of a crotyl‐oxy surface intermediate. By adsorption through the aldehyde oxygen atom to an O‐vacancy site on the TiO₂ surface, the C?O bond of crotonaldehyde is activated, by charge transfer, for hydrogenation. This intermediate reacts with spillover H provided by the Pt to produce crotyl alcohol.     

Facile Synthesis of Ultrathin Bimetallic PtSn Wavy Nanowires by Nanoparticle Attachment as Enhanced Hydrogenation Catalysts

Ultrathin wavy nanowires represent an emerging class of nanostructures that exhibit unique catalytic, magnetic, and electronic properties, but the controlled production of bimetallic wavy nanowires remains a significant challenge. Ultrathin bimetallic PtSn nanowires have been prepared with high yield and featuring a highly wavy structure. Owing to the ultrathin nature and unique electronic properties of these PtSn wavy nanowires, they exhibit improved catalytic performance for the hydrogenation of nitrobenzene, as well as for the hydrogenation of styrene. These results suggest a new strategy to prepare highly active catalysts through defect engineering and can significantly impact broad practical applications.     

Heteropolyacids dispersed within a polymer matrix as a new catalytic systems with controlled oxidative-reductive and acid-base active centers

Polymer support such as polypyrrole was selected as a matrix for heteropolyacid H₅PMo₁₀V₂O₄₀ in an attempt to prepare heterogeneous catalysts containing two different active centers: protons and transition metal ions. Exchanging protons from heteropolyanions dispersed in polymer matrix into ferric or ferrous ions cause the modifications of their catalytic properties. It is manifested by decrease of activity of acid-base centers and increase of activity of oxidative-reductive centers. Oxidation state of iron in all samples before and after catalytic reaction is the same (Fe(III)), but their structure is not similar. For catalysts doped with ferric ions the structural order is much more pronounced than for these doped with ferrous ions.     

Exploring Opportunities for Platinum Nanoparticles Encapsulated in Porous Liquids as Hydrogenation Catalysts

The unusual combination of characteristics observed for porous liquids, which are typically associated with either porous solids or liquids, has led to considerable interest in this new class of materials. However, these porous liquids have so far only been investigated for their ability to separate and store gases. Herein, the catalytic capability of Pt nanoparticles encapsulated within a Type I porous liquid (Pt@HS-SiO₂ PL) is explored for the hydrogenation of several alkenes and nitroarenes under mild conditions (T=40 °C, P_H2=1 atm). The different intermediates in the porous liquid synthesis (i.e., the initial Pt@HS-SiO₂, the organosilane-functionalized intermediate, and the final porous liquid) are employed as catalysts in order to understand the effect of each component of the porous liquid on the catalysis. For the hydrogenation of 1-decene, the Pt@HS-SiO₂ PL catalyst in ethanol has the fastest reaction rate if normalized with respect to the concentration of Pt. The reaction rate slows if the reaction is completed in a “neat” porous liquid system, probably because of the high viscosity of the system. These systems may find application in cascade reactions, in particular, for those with mutually incompatible catalysts.     

Direct hydrogenation of nitroaromatics and one-pot amidation with carboxylic acids over platinum nanowires

A novel ultrathin platinum nanowire with uniform length and a diameter of 1.5 nm was synthesized by acidic etching of FePt nanowire in methanol. This nanowire was characterized by high‐resolution transmission electron microscopy (HRTEM). X‐ray diffraction (XRD) data indicated that the main plane is (111). The ability of this nanowire to catalyze the heterogeneous hydrogenation of nitroaromatics to give the corresponding amines has been investigated. The catalyst showed satisfactory activity in various solvents under mild conditions and showed excellent stability. The catalytic performance was also evaluated in the one‐pot reduction of nitroaromatics and amidation with carboxylic acids under a hydrogen atmosphere at 100 °C. These methods for the hydrogenation of nitroaromatics and the direct amidation of nitroaromatics with carboxylic acids are simple, economical, and environmentally benign, and have practical advantages for the synthesis of amines and amides without the production of toxic byproducts.     

Highly Active Supported Pt Nanocatalysts Synthesized by Alcohol Reduction towards Hydrogenation of Cinnamaldehyde: Synergy of Metal Valence and Hydroxyl Groups

The hydrogenation of α,β‐unsaturated aldehydes to allylic alcohols or saturated aldehydes provides a typical example to study the catalytic effect on structure‐sensitive reactions. In this work, supported platinum nanocatalysts over hydrotalcite were synthesized by an alcohol reduction method. The Pt catalyst prepared by the reduction with a polyol (ethylene glycol) outperforms those prepared with ethanol and methanol in the hydrogenation of cinnamaldehyde. The selectivity towards the C=O bond is the highest over the former, although its mean size of Pt particles is the smallest. The hydroxyl groups on hydrotalcite could act as an internally accessible promoter to enhance the selectivity towards the C=O bond. The optimal Pt catalyst showed a high activity with an initial turnover frequency (TOF) of 2.314 s^?1. This work unveils the synergic effect of metal valence and in situ promoter on the chemoselective hydrogenation, which could open up a new direction in designing hydrogenation catalysts.     

多相不对称催化氢化研究进展*

本文综述了多相不对称催化氢化反应的最新研究进展.特别是对最近几年来两个典型的多相不对称催化氢化体系即酒石酸盐修饰镍催化剂催化β-酮酸酯的不对称氢化反应体系和金鸡纳生物碱修饰铂催化剂催化α-酮酸酯的不对称氢化反应体系进行了详细的介绍和讨论,同时展望了多相不对称催化氢化反应研究的前景.     

Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts

Methods for the hydrogenation of CO₂ into valuable chemicals are in great demand but their development is still challenging. Herein, we report the selective hydrogenation of CO₂ into ethanol over non‐noble cobalt catalysts (CoAlO_x), presenting a significant advance for the conversion of CO₂ into ethanol as the major product. By adjusting the composition of the catalysts through the use of different prereduction temperatures, the efficiency of CO₂ to ethanol hydrogenation was optimized; the catalyst reduced at 600 ° gave an ethanol selectivity of 92.1 % at 140 °C with an ethanol time yield of 0.444 mmol g^?1 h^?1. Operando FT‐IR spectroscopy revealed that the high ethanol selectivity over the CoAlO_x catalyst might be due to the formation of acetate from formate by insertion of *CH_x, a key intermediate in the production of ethanol by CO₂ hydrogenation.