Kinetics and mechanism of the reduction of monochloramine by hydroxylamine and hydroxylammonium ion

The kinetics and mechanism by which monochloramine is reduced by hydroxylamine in aqueous solution over the pH range of 5–8 are reported. The reaction proceeds via two different mechanisms depending upon whether the hydroxylamine is protonated or unprotonated. When the hydroxylamine is protonated, the reaction stoichiometry is 1:1. The reaction stoichiometry becomes 3:1 (hydroxylamine:monochloramine) when the hydroxylamine is unprotonated. The principle products under both conditions are Cl^–, NH⁺₄, and N₂O. The rate law is given by ?[d[NH₂Cl]/dt] = k₊[NH₃OH⁺][NH₂Cl] + k₀[NH₂OH][NH₂Cl]. At an ionic strength of 1.2 M, at 25°C, and under pseudo‐first‐order conditions, k₊= (1.03 ± 0.06) ×10³ L · mol^?1 · s^?1 and k₀=91 ± 15 L · mol^?1 · s^?1. Isotopic studies demonstrate that both nitrogen atoms in the N₂O come from the NH₂OH/NH₃OH⁺. Activation parameters for the reaction determined at pH 5.1 and 8.0 at an ionic strength of 1.2 M were found to be ΔH? = 36 ± 3 kJ · mol^–1 and Δ S? = ?66 ± 9 J · K^?1 · mol^?1, and Δ H? = 12 ± 2 kJ · mol^?1 and Δ S? = ?168 ± 6 J · K^?1 · mol^?1, respectively, and confirm that the transition states are significantly different for the two reaction pathways. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 124–135, 2006     

The Photoenolization of 2-Methylacetophenone and Related Compounds

A reinvestigation of 2-methylacetophenone ( 1 ) by ns flash photolysis has provided detailed evidence for the reaction sequence of photoenolization. The triplet reaction proceeds adiabatically from the lowest excited triplet state of the ketone, ³ K (1) , to the enol excited triplet state, ³ E (1) , which decays both to enol and ketone ground state. The Z- and E-isomers of the photoenol, Z- E (1) and E- E (1) are formed in about equal yield by the triplet pathway, while direct enolization from the lowest excited singlet state of 1 yields (predominantly) the Z-isomer. Intramolecular reketonization from Z- E (1) to 1 proceeds at a rate of ca. 10⁸s^?1 in cyclohexane, but can be retarded to ca. 10⁴s^?1 in hydrogen-bond-acceptor solvents. The proposed mechanism is summarized in Scheme 1 and rationalized on the basis of a state correlation diagram, Scheme 2. 3,3,6,8-Tetramethyl-1-tetralone ( 2 ) was used as a reference compound with fixed conformational position of the carbonyl group, and some results from a brief investigation of 2,4-dimethylbenzophenone ( 3 ) are also reported.     

Temperature and pressure effects on the kinetics of the Bromate ion-iodide ion-L-ascorbic acid clock reaction

The kinetics of the bromate ion-iodide ion-L-ascorbic acid clock reaction was investigated as a function of temperature and pressure using stopped-flow techniques. Kinetic results were obtained for the uncatalyzed as well as for the Mo(VI) and V(V) catalyzed reactions. While molybdenum catalyzes the BrO-I^? reaction, vanadium catalyzes the direct oxidation of ascorbic acid by bromate ion. The corresponding rate laws and kinetic parameters are as follows. Uncatalyzed reaction: r₂ = k₂[BrO] [I^?][H⁺]², k₂ = 38.6 ± 2.0 dm⁹ mol^?3 s^?1, ΔH? = 41.3 ± 4.2 kJmol^?1, ΔS? = ?75.9 ± 11.4 Jmol^?1 K^?1, ΔV? = ?14.2 ± 2.9 cm³ mol^?1. Molybdenum-catalyzed reaction: r′₂ = k₂[BrO] [I^?] [H⁺]² + k_Mo[BrO] [I^?] [ H⁺]²[M₀(VI)], k_Mo = (2.9 ± 0.3)10⁶ dm¹² mol^?4 s^?1, ΔH? = 27.2 ± 2.5 kJmol^?1, ΔS? = ?30.1 ± 4.5 Jmol^?1K^?1, ΔV? = 14.2 ± 2.1 cm³ mol^?1. Vanadium-catalyzed reaction: r′₁ = k_V[BrO] [V(V)], k_V = 9.1 ± 0.6 dm³ mol^?1 s^?1, ΔH? = 61.4 ± 5.4 kJmol^?1, ΔS? = ?20.7 ± 3.1 Jmol^?1K^?1, ΔV? = 5.2 ± 1.5 cm³ mol^?1. On the basis of the results, mechanistic details of the BrO-I^? reaction and the catalytic oxidation of ascorbic acid by BrO are elaborated. © 1995 John Wiley & Sons, Inc.     

Synthesis and Diels-Alder Reactivity of 2,3,5,6-Tetramethylidenenorbornane

Pd-catalyzed double carbomethoxylation of the Diels-Alder adduct of cyclo-pentadiene and maleic anhydride yielded the methyl norbornane-2,3-endo-5, 6-exo-tetracarboxylate ( 4 ) which was transformed in three steps into 2,3,5,6-tetramethyl-idenenorbornane ( 1 ). The cycloaddition of tetracyanoethylene (TCNE) to 1 giving the corresponding monoadduct 7 was 364 times faster (toluene, 25°) than the addition of TCNE to 7 yielding the bis-adduct 9 . Similar reactivity trends were observed for the additions of TCNE to the less reactive 2,3,5,6-tetramethylidene-7-oxanorbornane ( 2 ). The following second order rate constants (toluene, 25°) and activation parameters were obtained for: 1 + TCNE → 7 : k₁ = (255 + 5) 10^?4 mol^?1 · s^?1, ΔH≠ = (12.2 ± 0.5) kcal/mol, ΔS≠ = (?24.8 ± 1.6) eu.; 7 + TCNE → 9 , k₂ = (0.7 ± 0.02) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.1 ± 1.0) kcal/mol, ΔS≠ = ( ?30 ± 3.5) eu.; 2 + TCNE → 8 : k₁ = (1.5 ± 0.03) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.8 ± 0.7) kcal/mol, ΔS≠ = (?26.4 ± 2.3) eu.; 8 + TCNE → 10 ; k₂ = (0.004 ± 0.0002) 10^?4 mol^?1 · s^?1, ΔH≠ = (17 ± 1.5) kcal/mol, ΔS≠ = (?30 ± 4) eu. The possible origins of the relatively large rate ratios k₁/k₂ are discussed briefly.     

Inorganic reactions of iodine(III) in acidic solutions and free energy of iodous acid formation

An analysis of the former works devoted to the reactions of I(III) in acidic nonbuffered solutions gives new thermodynamic and kinetic information. At low iodide concentrations, the rate law of the reaction IO + I^? + 2H⁺ ? IO₂H + IOH is k_+B [IO][I^?][H⁺]² – k_?B [IO₂H][IOH] with k_+B = 4.5 × 10³ M^?3s^?1 and k_?B = 240 M^?1s^?1 at 25°C and zero ionic strength. The rate law of the reaction IO₂H + I^? + H⁺ ? 2IOH is k_+C [IO₂H][I^?][H⁺] – k_?C [IOH]² with k_+C = 1.9 × 10¹⁰ M^?2s^?1 and k_?C = 25 M^?1s^?1. These values lead to a Gibbs free energy of IO₂H formation of ?95 kJ mol^?1. The pK_a of iodous acid should be about 6, leading to a Gibbs free energy of IO formation of about ?61 kJ mol^?1. Estimations of the four rate constants at 50°C give, respectively, 1.2 × 10⁴ M^?3s^?1, 590 M^?1s^?1, 2 × 10⁹ M^?2s^?1, and 20 M^?1 s^?1. Mechanisms of these reactions involving the protonation IO₂H + H⁺ ? IO₂H and an explanation of the decrease of the last two rate constants when the temperature increases, are proposed. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 647–652, 2008     

Encapsulation of AGE‐Breaker Alagebrium by Cucurbit[7]uril Improved the Stability of Both Its Carbonyl α‐Hydrogen and Thiazolium C2‐Hydrogen

As determined by both ¹H NMR and UV/Vis spectroscopic titration, ESI‐MS, isothermal titration calorimetry, and DFT molecular modeling, advanced glycation end products (AGE) breaker alagebrium (ALA) formed 1:1 guest–host inclusion complexes with cucurbit[7]uril (CB[7]), with a binding affinity, K_a, in the order of magnitude of 10⁵ m ^?1, thermodynamically driven by both enthalpy (ΔH=?6.79 kcal mol^?1) and entropy (TΔS=1.21 kcal mol^?1). For the first time, a dramatic inhibition of keto–enol tautomerism of the carbonyl α‐hydrogen of ALA has been observed, as evidenced by over an order of magnitude decrease of both the first step rate constant, k₁, and the second step rate constant, k₂, during hydrogen/deuterium exchange in D₂O. Meanwhile, as expected, the reactivity of C2‐hydrogen was also inhibited significantly, with an upshift of 2.09 pK_a units. This discovery will not only provide an emerging host molecule to modulate keto–enol tautomerism, but also potentially lead to a novel supramolecular formulation of AGE‐breaker ALA for improved stability and therapeutic efficacy.     

Mechanistic Aspects of Ligand Substitution on the Hydroxopentaaquarhodium(III) Ion in Aqueous Solution by Sulfur‐Containing Bioactive Ligands

The kinetics of the interactions between three sulfur‐containing ligands, thioglycolic acid, 2‐thiouracil, glutathione, and the title complex, have been studied spectrophotometrically in aqueous medium as a function of the concentrations of the ligands, temperature, and pH at constant ionic strength. The reactions follow a two‐step process in which the first step is ligand‐dependent and the second step is ligand‐independent chelation. Rate constants (k₁ ～10^?3 s^?1 and k₂ ～10^?5 s^?1) and activation parameters (for thioglycolic acid: ΔH₁^≠ = 22.4 ± 3.0 kJ mol^?1, ΔS₁^≠ = ?220 ± 11 J K^?1 mol^?1, ΔH₂^≠ = 38.5 ± 1.3 kJ mol^?1, ΔS₂^≠ = ?204 ± 4 J K^?1 mol^?1; for 2‐thiouracil: ΔH₁^≠ = 42.2 ± 2.0 kJ mol^?1, ΔS₁^≠ = ?169 ± 6 J K^?1 mol^?1, ΔH₂^≠ = 66.1 ± 0.5 kJ mol^?1, ΔS₂^≠ = ?124 ± 2 J K^?1 mol^?1; for glutathione: ΔH₁^≠ = 47.2 ± 1.7 kJ mol^?1, ΔS₁^≠ = ?155 ± 5 J K^?1mol^?1, ΔH₂^≠ = 73.5 ± 1.1 kJ mol^?1, ΔS₂^≠ = ?105 ± 3 J K^?1 mol^?1) were calculated. Based on the kinetic and activation parameters, an associative interchange mechanism is proposed for the interaction processes. The products of the reactions have been characterized from IR and ESI mass spectroscopic analysis. A rate law involving the outer sphere association complex formation has been established as      

A Thermodynamic Study of Chromotropico-Titanium(III) Complex from Spectrophotometric Measurements

The formation of 1 : 2 titanium(III) complex with chromotropic acid (4, 5-dihydroxy-2, 7-naphthalene-disulfonic acid) was observed by spectrophotometric measurements at various ionic strengths. An expression, [Ti(III)]/D=1/Δ? + α_H²+/KΔ?[H₂R^2?]², was derived for the determination of the formation constant, K=7.2×10² liter² mol^?2 for the Ti(III).(HR)₂ ion in the pH range of 1.3–1.8 at constant ionic strength, I=0.2 M, at 25°C. The thermodynamic data for the reaction, Ti(III)+2H₃R^2?=Ti(III) (HR)₂+2H⁺, were calculated to be ΔG° = ?16 kJ mol^?1 ΔH° = 18 kJ mol^?1, ΔS° = 110 JK^?1 mol^?1, at 25°C.     

Preparation and Diels-Alder Reactivity of 2,3,5,6,7,8-Hexamethylidenebicyclo [2.2.2]octane (‘[2.2.2]Hericene’). Force-field calculations of exocyclic dienes as a moiety of bicyclic skeletons

The [2.2.2]hericene ( 6 ), a bicyclo[2.2.2]octane bearing three exocyclic s-cis-butadiene units has been prepared in eight steps from coumalic acid and maleic anhydride. The hexaene 6 adds successively three mol-equiv. of strong dienophiles such as ethylenetetracarbonitrile (TCE) and dimethyl acetylenedicarboxylate (DMAD) giving the corresponding monoadducts 17 and 20 (k₁), bis-adducts 18 and 21 (k₂) and tris-adducts 19 and 22 (k₃), respectively. The rate constant ratio k₁/k₂ is small as in the case of the cycloadditions of 2,3,5,6-tetramethylidene-bicyclo [2.2.2]octane ( 3 ) giving the corresponding monoadducts 23 and 27 (k₁) and bis-adducts 25 and 29 (k₂) with TCE and DMAD, respectively. Constrastingly, the rate constant ratio k₂/k₃ is relatively large as the rate constant ratio k₁/k₂ of the Diels-Alder additions for 5,6,7,8-tetramethylidenebicyclo [2.2.2]oct-2-ene ( 4 ) giving the corresponding monoadducts 24 and 28 (k₁) and bis-adducts 26 and 30 (k₂). The following second-order rate constants (toluene, 25°) and activation parameters were obtained for the TCE additions: 3 +TCE→ 23 : k₁ = 0.591±0.012 mol^?1·l·s^?1, ΔH^≠=10.6±0.4 kcal/mol, and ΔS^≠ = ?24.0±1.4 cal/mol·K (e.u.); 23 +TCE→ 25 : k₂=0.034±0.0010 mol^?1·l·s^?1, ΔH^≠ = 10.6±0.6 kcal/mol, and ΔS^≠ = ?29.7±2.0 e.u.; 4 +TCE→ 26 : k₁ = 0.172±0.035 mol^?1·l·s^?1, ΔH^≠ 11.3±0.8 kcal/mol, and ΔS^≠ = ?24.0±2.8 e.u.; 24 +TCE→ 26 : k₂ = (6.1±0.2)·10^?4 mol^?1·l·s^?1, ΔH^≠ = 13.0±0.3 kcal/mol, and ΔS^≠ = ?29.5±0.8 e.u.; 6 +TCE→ 17 : k₁ = 0.136±0.002 mol^?1·l·s^?1, ΔH^≠ = 11.3±0.2 kcal/mol, and ΔS^≠ = ?24.5±0.8 e.u.; 17 +TCE→ 18 : k₂ = 0.0156±0.0003 mol^?1·l·s^?1, ΔH^≠ = 10.9±0.5 kcal/mol, and ΔS^≠ = ?30.1 ± 1.5 e.u.; 18 +TCE→ 19 : k₃=(5±0.2) · 10^?5 mol^?1 mol^?1 ·l·s^?1, ΔH^≠ = 15±3 kcal/mol, and ΔS^≠ = ?28 ± 8 e.u. The following rate constants were evaluated for the DMAD additions (CD₂Cl₂, 30°): 6 +DMAD→ 20 : k₁ = (10±1)·10^?4 mol^?1 · l·s^?1; 20 +DMAD→ 21 : k₂ = (6.5±0.1) · 10^?4 mol^?1 ·l·^?1; 21 +DMAD→ 22 : k₃ = (1.0±0.1) · 10^?4 mol^?1 ·l·s^?1. The reactions giving the barrelene derivatives 19, 22, 26 and 30 are slower than those leading to adducts that are not barrelenes. The former are estimated less exothermic than the latter. It is proposed that the Diels-Alder reactivity of exocyclic s-cis-butadienes grafted onto bicycle [2.2.1]heptanes and bicyclo [2.2.2]octanes that are modified by remote substitution of the bicyclic skeletons can be affected by changes inthe exothermicity of the cycloadditions, in agreement with the Dimroth and Bell-Evans-Polanyi principle. Force-field calculations (MMPI 1) of 3, 4, 6 and related exocyclic s-cis-butadienes as a moiety of bicyclo [2.2.2]octane suggested single minimum energy hypersurfaces for these systems (eclipsed conformations, planar dienes). Their flexibility decreases with the degree of unsaturation of the bicyclic skeleton. The effect of an endocyclic double bond is larger than that of an exocyclic diene moiety.     

Water-Exchange Mechanism of Tetraaquapalladium(II). A Variable-Pressure and Variable-Temperature Oxygen-17 NMR Study

Water exchange of square-planar Pd(H₂O)²₄⁺ has been studied as a function of temperature (240 to 345 K) and pressure (0.1 to 260 MPa, at 324 K) by measuring the ^17/O-FT-NMR line-widths of the resonance from coordinated water at 27.11 and 48.78 MHz. The following exchange parameters were obtained: k²⁹⁸_ex = (560 ± 40) s^?1, ΔH* = (49.5 ± 1.9) kJ mol^?1, ΔS* = – (26 ± 6) J K^?1 mol^?1 and ΔV* = – (2.2 ± 0.2) cm³ mol^?1. The values refere to an aqueous perchlorate medium with an ionic strength between 2.0 and 2.6 m and a perchloric-acid concentration between 0.8 and 1.7 m, and are interpreted in terms of an associative (a) activation for the exchange. The exchange rate for Pd(H₂O)²₄⁺ is 1.4 × 10⁶ times faster than for Pt(H₂O)²₄⁺ at 298 K. A comparison with reactions between other nucleophiles and Pd(H₂O)²₄⁺ is also made.     

Proton and sodium ion affinities of glycine and its sodium salt in the gas phase. Ab initio calculations

The energies of protonation and Na⁺ cationization of glycine (GLY) and its (GLY ? H + Na) salt in the gas phase were calculated using ab inltio calculations. The proton affinity of GLY, valued at the MP2/6–31G*//3-21G level, is 937 kJ mol^?1. The amino function is confirmed to be the most favourable site of protonation: ‘proton affinities’ of the carbonyl and hydroxyl functions are calculated to be 75 and 180 kJ mol^?1, respectively, lower than that of NH₂ at the MP2/6-31G*//3–21G level. Calculations performed up to the MP2/6–31G*//3–21G level give the Na⁺ affinity of GLY as 189 kJ mol^?1 and the H⁺ and Na⁺ affinities of (GLY – H + Na) as 1079 and 298 kJ mol^?1, respectively. The geometries of all neutral and protonated species optimized with the 3–21G basis set are described. Both H* and Na⁺ cations complex preferably between the nitrogen atom and the carbonyl oxygen atom, leading to pseudo-five-membered ring structures in which Na? O and Na? N bonds lengths are greater than 2 Å.     

Surface segregation measurements of In and S impurities from a dilute Cu(In,S) ternary alloy

The surface segregation of In and S from a dilute Cu(In,S) ternary alloy were measured using Auger electron spectroscopy coupled with a linear programmed heater. The alloy was linearly heated and cooled at constant rates. Segregation data of a linear heat run showed surface segregation of In that reached a maximum surface coverage of 25% followed by S, which reached a coverage of 30%. It was found that after In had reached a maximum surface coverage, it started to desegregate as soon as the S enriched the surface until In was completely replaced by S. The segregation parameters, namely, the pre‐exponential factor (D₀), activation energy (Q), segregation energy (ΔG?) and interaction energy (Ω) were extracted from the measured segregation data for both In and S segregation in Cu by simulating the measured segregation data with a theoretical segregation model (modified Darken model). The segregation parameters obtained for In segregation in Cu are D₀ = 1.8 ± 0.5 × 10^?5 m² s^?1, Q = 184.3 ± 1.0 kJ.mol^?1, ΔG? = ?61.4 ± 1.4 kJ.mol^‐1, Ω_Cu?In = 3.0 ± 0.4 kJ.mol^?1; for S segregation in Cu the parameters are D₀ = 8.9 ± 0.5 × 10^?3 m² s^?1, Q = 212.8 ± 3.0 kJ.mol^?1, ΔG? = ?120.0 ± 3.5 kJ.mol^?1, Ω_Cu?S = 23.0 ± 2.0 kJ mol^?1 and the In and S interaction parameter is Ω_In?S = ?4.0 ± 0.5 kJ.mol^?1. The initial parameters used for the Darken calculations were extracted from fits performed with the Fick's and Guttmann model. Copyright © 2013 John Wiley & Sons, Ltd.     

Multinuclear NMR Studies of Ligand-Exchange Reactions on Analogous Technetium(V) and Rhenium(V) Complexes. Relevance to nuclear medicine

The kinetics of pyridine exchange on trans-[MO₂(py)₄]⁺ have been followed by ¹H-NMR in CD₃NO₂ for M = Re, Tc: k²⁹⁸S^?1 = (5.5 ± 0.1) × 10^?6, 0.04 ± 0.02; ΔH^≠/kJmol^?1 = 111 ± 3, 101 ± 9; ΔS^≠/JK^?1mol^?1 = +28 ± 10, +68 ± 35. For the Re^v complex, pyridine and oxygen exchanges have been measured simultaneously by ¹H- and ¹⁷O-NMR in deuterated water: k²⁹⁸/s^?1 = (8.6 ± 0.2) × 10^?6 (py), (14.5 ± 0.3) × 10^?6 (oxygen); ΔH^≠/kJmol^?1 = 111 ± 1, 91 ± 1; ΔS /JK^?1mol^?1 = +32 ± 3, ?32 ± 4. For both complexes, the rate law for pyridine exchange is first-order in complex and zero-order in pyridine; together with the activation parameter values, and the fact that the rate does not depend significantly on the nature of the solvent, this strongly implies the operation of a dissociative mechanism. The ratio of pyridine exchange rates for the Tc and Re complexes at room temperature is ca. 8000. The consequences of these observations for radiopharmaceutical synthesis are discussed.     

Mono-complex formation kinetics of iron(III) with nonsubstituted octane and nonane 2,4-dicarbonyl ligands in aqueous solution

The kinetics and mechanism of the reaction of complexation of iron(III) with 2,4-octanedione and 2,4-nonanedione have been investigated spectrophotometrically in aqueous solution at 10°C and ionic strength 0.5 mol dm^?3 NaClO₄. The equilibrium constants of the mono-complexes have been determined. The mechanism proposed to account for the kinetic data involves a double reversible pathway where both Fe³⁺ and Fe(OH)²⁺ react with the enol tautomer of the ligand. 2,4-Octanedione reacts with Fe³⁺ and Fe(OH)²⁺ with rate constants of 0.65 dm³ mol^?1 s^?1, and 14.07 dm³ mol^?1 s^?1, respectively. For 2,4-nonanedione complexation the rate constants determined are 0.49 dm³ mol^?1 s^?1, and 11.39 dm³ mol^?1 s^?1, respectively. Some discussions are made on the basis of Eigen-Wilkins theory considering the effect of solvent exchange on the complex formation. © 1993 John Wiley & Sons, Inc.     

Studies on the kinetics and mechanism of dissociation of copper(II) and nickel(II) complexes of the macrocyclic ligand 1, 5, 9, 13-tetraaza-2, 4, 4, 10, 12, 12-hexamethyl-cyclohexadecane-1, 9-diene in perchloric acid media

Summary Acid catalysed dissociation of the copper(II) and nickel(II) complexes (ML²⁺ of the quadridentate macrocyclic ligand 1, 5, 9, 13-tetraaza-2, 4, 4, 10, 12, 12-hexamethyl-cyclohexadecane-1, 9-diene (L) has been studied spectrophotometrically. Both complexes dissociate quite slowly with the observed pseudo-first order rate constants (k_obs) showing acid dependence; for the nickel(II) complex (k_obs)=k_O+k_H[H⁺], the k_o path is however absent with the copper(II) complex. At 60°C (I=0.1M) the k_H values areca 10^–4 M^–1 s^–1 for both complexes; k _H ^Cu /k _H ^Ni =ca. 3.9, comparable to some other square-planar complexes of these metal ions. The rate difference is primarily due to H values [copper(II) complex, 29.4±0.5 kJ mol^–1; nickel(II) complex, 35.6±1.5 kJ mol^–1] with highly negative S values [for copper(II), –215.5 ±6.1 JK^–1 mol^–1 and for nickel(II), –208.1 ±5.6 JK^–1 mol^–1] which are much higher than the entropy of solvation of Ni²⁺ (ca. –160 JK^–1 mol^–1) and Cu²⁺ (ca. –99 JK^–1 mol^–1) ions; significant solvation of the released metal ions and the ligand is indicated.     

The Reaction of Ozone with the Hydroxide Ion: Mechanistic Considerations Based on Thermokinetic and Quantum Chemical Calculations and the Role of HO4− in Superoxide Dismutation

The reaction of OH^? with O₃ eventually leads to the formation of ^.OH radicals. In the original mechanistic concept (J. Staehelin, J. Hoigné, Environ. Sci. Technol. 1982 , 16, 676–681), it was suggested that the first step occurred by O transfer: OH^?+O₃→HO₂^?+O₂ and that ^.OH was generated in the subsequent reaction(s) of HO₂^? with O₃ (the peroxone process). This mechanistic concept has now been revised on the basis of thermokinetic and quantum chemical calculations. A one‐step O transfer such as that mentioned above would require the release of O₂ in its excited singlet state (¹O₂, O₂(¹Δ_g)); this state lies 95.5 kJ mol^?1 above the triplet ground state (³O₂, O₂(³Σ_g^?)). The low experimental rate constant of 70 M ^?1 s^?1 is not incompatible with such a reaction. However, according to our calculations, the reaction of OH^? with O₃ to form an adduct (OH^?+O₃→HO₄^?; ΔG=3.5 kJ mol^?1) is a much better candidate for the rate‐determining step as compared with the significantly more endergonic O transfer (ΔG=26.7 kJ mol^?1). Hence, we favor this reaction; all the more so as numerous precedents of similar ozone adduct formation are known in the literature. Three potential decay routes of the adduct HO₄^? have been probed: HO₄^?→HO₂^?+¹O₂ is spin allowed, but markedly endergonic (ΔG=23.2 kJ mol^?1). HO₄^?→HO₂^?+³O₂ is spin forbidden (ΔG=?73.3 kJ mol^?1). The decay into radicals, HO₄^?→HO₂^.+O₂^.?, is spin allowed and less endergonic (ΔG=14.8 kJ mol^?1) than HO₄^?→HO₂^?+¹O₂. It is thus HO₄^?→HO₂^.+O₂^.? by which HO₄^? decays. It is noted that a large contribution of the reverse of this reaction, HO₂^.+O₂^.?→HO₄^?, followed by HO₄^?→HO₂^?+³O₂, now explains why the measured rate of the bimolecular decay of HO₂^. and O₂^.? into HO₂^?+O₂ (k=1×10⁸ M ^?1 s^?1) is below diffusion controlled. Because k for the process HO₄^?→HO₂^.+O₂^.? is much larger than k for the reverse of OH^?+O₃→HO₄^?, the forward reaction OH^?+O₃→HO₄^? is practically irreversible.     

New Zn(II) complexes based on biologically active substituted acetic acid and nitrogen donor ligands: synthesis,crystal structure and biological applications

The complexes [Zn(phenylacetato)₂(2-aminopyridin)₂] (3), [Zn(phenylacetato)₂(1,10-phenanthroline)]·H₂O (4), and [Zn(phenylacetato)₂(2,9-dimethyl-1,10-phenanthroline)]·0.5 H₂O (5) were prepared and characterized by IR-, UV–Visible, ¹H and ¹³C NMR spectroscopy, and single crystal X-ray diffraction. BNPP hydrolysis of the complexes and their parent nitrogen ligands showed that the hydrolysis rate of bis-(4-nitrophenyl) phosphate (BNPP) was 1.7 × 10⁵ L mol^?1 s^?1 for 3, 3.1 × 10⁵ L mol^?1 s^?1 for 4 and 4.3 × 10⁴ L mol^?1 s^?1 for 5. Antibacterial activities show the effect of complexation on activity against Gram-positive (S. epidermidis, S. aureus, E. faecalis, M. luteus and B. subtilis) and Gram-negative (K. pneumonia, E. coli, P. mirabilis and P. aeruginosa) bacteria using the agar well diffusion method. Complex 4 showed good activity against G? bacteria except P. aeruginosa, and against G+ bacteria except E. ferabis. Complex 5 showed no activity against G? bacteria, low activity against M. luteus and B. subtilis bacteria and high activity against S. epidemidis and S. aureus. Complex 3 did not show any activity against G? or G+ bacteria.     

IONIC STRENGTH EFFECTS ON THE GROUND STATE COMPLEXATION and TRIPLET STATE ELECTRON TRANSFER REACTION BETWEEN ROSE BENGAL and METHYL VIOLOGEN

Abstract— The equilibrium constants, K_c, for complexation between methyl viologen dication (MV²+) and Rose Bengal, or Eosin Y, decrease with increasing ionic strength. At zero ionic strength K_c is 6500 (± 500) mol^?1 dm³ for Rose Bengal and 3200 (± 200) mol^?1 dm³ for Eosin Y, and these values decrease to 1500 (± 100) and 680 (± 40) mol^?1 dm³, respectively, at an ionic strength of 0.1 mol dm^?3. K_c is independent of pH between 4.5 and 10. ΔH is -25 (± 1) kJ mol^?1 for complexation with either dye, whereas ΔS is -15 (± 3) J K^?1 mol^?1 for Rose Bengal, and - 23 (± 3) J K^?1 mol^?1 for Eosin Y. The complexation constant for Rose Bengal and the neutral viologen, 4,4'-bipyridinium-N, N'-di(propylsulphonate), (4,4'-BPS), is 420 (± 35) mol^?1 dm³, and independent of ionic strength. No complexation could be observed for either Rose Bengal or Eosin with another neutral viologen, 2,2'-bipyridinium-N,N'-di(propylsulphonate), (2,2'-BPS). MV²+ quenches the triplet state of Rose Bengal with a rate constant of 7 × 10⁹ mol^?1 dm³ s^?1, and this rate constant decreases slightly as ionic strength increases. The cage escape yield following quenching, Φ_cc is very low (Φ_cc= 0.02 (± 0.005), and independent of ionic strength. 4,4'-BPS quenches the triplet state of Rose Bengal with a rate constant of 2.2 (± 0.1) × 10⁹ mol^?1 dm³ s^?1, and gives a cage escape yield of 0.033 (± 0.006). 2,2'-BPS quenches the Rose Bengal triplet with a rate constant of 6 (± 1) × 10⁸ mol^?1 dm³ s^?1 and gives a cage escape yield of 0.07 (± 0.01). Conductivity measurements indicate that MV²+(Cl^?)₂ is completely dissociated at concentrations below 2 × 10^?2 mol dm^?3.     

The structure and dissociation pathways of protonated methanol: An ab initio molecular orbital study

Ab initio molecular orbital calculations with moderately large polarization basis sets and including valence-electron correlation have been used to examine the structure and dissociation mechanisms of protonated methanol [CH₃OH₂]⁺. Stable isomers and transition structures have been characterized using gradient techniques. Protonated methanol is found to be the only stable isomer in the [CH₅O]⁺ potential surface. There is no evidence for a tightly-bound complex, [HOCH₂]⁺…?H₂, analogous to the preferred structure [CH₃]⁺…?H₂ of [CH₅]⁺. Protonated methanol is found to possess a pyramidal arrangement of bonds at the oxygen atom with a barrier to inversion of 8kJ mol^?1. The lowest energy fragmentation pathways are dissociation into methyl cation and water (predicted to require 284 kJ mol^?1 with zero reverse activation energy) and loss of molecular hydrogen (endothermic by 138 kJ mol^?1 but with a reverse activation barrier of 149 kJ mol^?1). The results offer a possible explanation as to why production of [CH₂OH]⁺ from the reaction of methyl cation with water is not observed. Other dissociation processes examined include loss of a hydrogen atom to yield the methylenoxonium radical cation or methanol radical cation (requiring 441 and 490 kJ mol^?1, respectively) and loss of a proton to yield neutral methanol (requiring 784 kJ mol^?1).     

Bienzyme Electrode Compatible Behavior for Water-Soluble and-Insoluble Substrates

Abstract

A bienzymatic sensing layer containing two enzymes able to work sequentially, choline oxidase (ChOD) and phospholipase D (PLaseD), was used to design an electrochemical biosensor for the detection of either a water-soluble (choline) or insoluble (phosphatidylcholine) substrate. A photocrosslinkable polymer, poly(vinyl alcohol) bearing styrylpyridinium groups (PVA-SbQ), was used as host-matrix for enzyme immobilization. Controlled amounts of PVA-SbQ and of the two enzymes were directly coated on a platinum disk, then photopolymerized. The compatibility of working conditions for choline and phosphatidylcholine detection in the presence of Triton X-100 and CaCl₂ was investigated. The effect of the activity ratio PLaseD / ChOD on the sensor performance was determined. The sensitivities to choline and to phosphatidylcholine were 18 mA.1mol^?1 and 0.66 mA.1.mol^?1 respectively, the detection limit being 1.5.10^?8 M for choline and 1.5.10^?6 M for phosphatidylcholine. The linear range extended up to ca. 10^?4 M for choline and ca. 2.10^?5 M for phosphatidylcholine and the response time was close to 30 seconds for choline and ca. 2 min for phosphatidylcholine.