Structures of Mn(II) complexes of bis(2-pyridylmethyl)amine (bpa) and (2-pyridylmethyl)(6-methyl-2-pyridylmethyl)amine (Mebpa): geometric isomerism in the solid state

The crystal structures of [Mn(bpa)₂](ClO₄)₂ (1), [bpa?=?bis(2-pyridylmethyl)amine], and Mn(6-Mebpa)₂(ClO₄)₂ (2), [6-Mebpa?=?(6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine] have been determined. In 1, two facial [Mn(bpa)₂]²⁺ isomers are observed in the same unit cell, one with C _i (1a) and the other with C₂ (1b) symmetries. In 2, only the isomer with C₂ symmetry is observed. The structure of [Mn(bpa)₂]²⁺ with only C₂ symmetry has been reported previously (Inorg. Chem., 31, 4611 (1992)). The bond length order Mn–N_amine?>?Mn–N_pyridyl, observed in the C₂ and the C _i isomers in the crystals of 1, is the reverse of the order observed in the structure of [Mn(bpa)₂](ClO₄)₂ which contains only the C₂ isomer in the unit cell. The structure of 2 in which only the C₂ isomer is found, also shows the bond length order Mn–N_pyridyl?>?Mn–N_amine. In cyclic voltammetric experiments in acetonitrile solutions, 1 and 2 show irreversible anodic peaks at E _p?=?1.60 and 1.90?V respectively, (vs. Ag/AgCl), assigned to the oxidation of Mn(II) to Mn(III). The substantially higher oxidation potential of 2 is attributable to a higher rearrangement energy in complex 2 due to the steric effect of the methyl substituent.     

Mononuclear oxovanadium complexes of tris(2-pyridylmethyl)amine

Mononuclear oxovanadium(IV) and dioxovanadium(V) complexes of tris(2-pyridylmethyl)amine (tpa) have been prepared for the first time. Crystal structure determinations of three oxovanadium(IV) complexes, [VO(SO4)(tpa)], [VOCl(tpa)]PF6, or [VOBr(tpa)]PF6, and a dioxovanadium(v) complex [V(O)2(tpa)]PF6 disclosed that the tertiary nitrogen of the tpa ligand always occupies the trans-to-oxo site. The structures of an oxo-peroxo complex [VO(O2)(tpa)]Cl that was prepared previously and of a mu-oxo vanadium(III) complex [{VCl(tpa)}2(mu-O)](PF6)2 have also been determined. The tertiary nitrogen is located at a trans site to the peroxo and chloride ligands, respectively. The total sums of the four V-N bond lengths from the tpa ligand are remarkably similar among the six complexes, indicating that the vanadium oxidation states become less influential in tpa bonding due primarily to the coordination of electron-donating oxo ligand(s). Absorption spectra of [VOCl(tpa)]+ in acetonitrile showed a significant change upon addition of p-toluenesulfonic acid and HClO4, but not on addition of benzoic acid. Protonation at the oxo ligand by the former two acids is suggested. Cyclic voltammetric studies in acetonitrile verified the proton-coupled redox behavior of the V(III)/V(IV) process involving the oxo ligand for the first time. From the dependence of the added p-toluenesulfonic acid to the CV, redox potentials for the following species have been estimated: [V(IV)OCl(tpa)]+/[V(III)OCl(tpa)](E1/2=-1.59 V vs. Fc+/Fc), [V(IV)(OH)Cl(tpa)]2+/[V(III)(OH)Cl(tpa)]+(Epc=-1.34 V), [V(IV)(OH2)Cl(tpa)]3+/[V(III)(OH2)Cl(tpa)]2+(Epa=-0.49 V), and [V(IV)Cl2(tpa)]2+/[V(III)Cl2(tpa)]+(E1/2=-0.89 V). The reduction of [V(V)(O)2(tpa)]+ in 0.05 M [(n-Bu)4N]PF6 acetonitrile showed a major irreversible reduction wave V(V)/(IV) at -1.48 V. The metal reduction potentials of the oxovanadium(IV) and dioxovanadium(V) species are very close, reinforcing the significant influence of the oxo ligand(s).     

Synthesis and structural characterisation of cobalt(II) and iron(II) chloride complexes containing bis(2-pyridylmethyl)amine and tris(2-pyridylmethyl)amine ligands

Treatment of (2-C₅H₄N)CH_{2 3}N (TPA) with one equivalent of MCl₂ in n-BuOH at elevated temperatures affords the six-coordinate complexes [(TPA)MCl₂] (M = Co (1), Fe (2)) and, in the case of CoCl₂, the five-coordinate chloride salt [(TPA)CoCl]Cl (3). Conversely, addition of an excess of CoCl₂ in the latter reaction leads to [(TPA)CoCl]₂[CoCl₄] (4) as the only isolable product. Interaction of one equivalent of (2-C₅H₄N)CH_{2 2}NH (DPA) and MCl₂ under similar reaction conditions to that described above affords the dimeric species [(fac-DPA)MCl(μ-Cl)]₂ (M = Co (5), Fe (6)), while the bis(ligand) halide salts [(fac-DPA)₂M]Cl₂ (M = Co (7), Fe (8)) are accessible on addition of two equivalents of DPA. In the presence of air, 6 undergoes oxidation to give [ (fac-DPA)FeCl_{2 2}(μ-O)] (9). Single-crystal X-ray diffraction studies are reported for 1, 2 · MeCN, 3, , 7 · 3MeCN, 8 · 3MeCN and 9.     

The coordination chemistry of FeCl3 and FeCl2 to bis[2-(2,3-dihydroxyphenyl)-6-pyridylmethyl](2-pyridylmethyl)amine: access to a diiron(III) compound with an unusual pentagonal-bipyramidal/square-pyramidal environment

Coordination of FeCl3 to the title ligand yields a mononuclear iron(III) complex 1, which was characterized by spectroscopic techniques and X-ray diffraction. The ligand is (kappa3-N) tridentate and the metal, which lies in a pseudo-octahedral environment, is bound to a phenolate group from the catechol substituent. The dichloroiron(II) complex 2 was easily obtained by metalation of the ligand with FeCl2 and characterized by various spectroscopic techniques. In their cyclic voltammograms both 1 and 2 display the same reversible FeII/FeIII wave at E1/2=10 mV (vs. SCE). Reduction of compound 1 with Zn/Hg yields 2', which displays identical properties to 2. Taken together, these findings indicate that in spite of the different oxidation state of the metal in 2, no major geometrical/structural change is observed at the metal center with respect to 1. The reaction of 2 with dioxygen in the absence of organic substrates proceeds extremely rapidly and yields compound 3, which is a diiron(III) derivative whose X-ray crystal structure is also reported. The possibility of a radical-based mechanism is discussed. Compound 3 displays an unusual geometry: one iron(III) center is seven-coordinate, whereas the other lies in a square-pyramidal environment. The two iron atoms are bridged by the catecholato substituents. To the best of our knowledge, 3 is the first example of a seven-coordinate iron(III) derivative with tris(2-pyridylmethyl)amine ligands.     

(2-Pyridylmethyl)ammonium pyridine-2-carboxylate: the product of oxidative degradation of bis(2-pyridylmethyl)amine

The title compound, C₆H₉N₂⁺·C₆H₄NO₂⁻, has been formed by oxidative degradation of neat bis(2-pyridyl­methyl)­amine. Hydro­gen bonds link the ions into infinite chains along the a axis.     

Synthesis and characterization of bis(di-2-pyridylmethanamine)ruthenium(II)

The complex Ru(dipa)(2)(2+) (dipa = di-2-pyridylmethanamine) has been prepared, yielding approximately a statistical ratio of the meso and rac isomers. The electronic spectra of both isomers show pyridyl pi --> pi transitions in the UV region and MLCT bands in the visible region. The solvent dependence of the spectra provides evidence of hydrogen bond formation between the solvent and the NH(2) site on the ligand. The electrochemical properties of the two isomers are identical; each undergoes a reversible one-electron oxidation in acetonitrile (E(1/2) = 0.933 V vs Ag/AgCl) and in aqueous solution below pH 3 (E(1/2) = 0.786 V vs Ag/AgCl). In aqueous solution above pH 3, one-electron oxidation of the ruthenium center is followed by deprotonation of the ligand NH(2) site yielding a reactive amidoruthenium(III) species. The ruthenium-bound dipa ligand possesses structural constraints that prevent the usual oxidative dehydrogenation reaction, which would yield exclusively the corresponding imine. Instead the amidoruthenium(III) intermediate finds alternative reaction routes leading to multiple products.     

Nonheme oxoiron(IV) complexes of tris(2-pyridylmethyl)amine with cis-monoanionic ligands

Treatment of [Fe(IV)(O)(TPA)(NCMe)](CF3SO3)2 [TPA, N,N,N-tris(2-pyridylmethyl)amine] with 3 equiv of NR4X (X = CF3CO2, Cl, or Br) in MeCN at -40 degrees C affords a series of metastable [Fe(IV)(O)(TPA)(X)]+ complexes. Some characteristic features of the S = 1 oxoiron(IV) unit are quite insensitive to the ligand substitution in the equatorial plane, namely, the Fe-O distances (1.65-1.66 A), the energy ( approximately 7114.5 eV) and intensity [25(2) units] of the 1s-to-3d transition in the X-ray absorption spectra, and the M?ssbauer isomer shifts (0.01-0.06 mm.s(-1)) and quadrupole splittings (0.92-0.95 mm.s(-1)). The coordination of the anionic X ligand, however, is evidenced by red shifts of the characteristic near-IR ligand-field bands (720-800 nm) and spectroscopic observation of the bound anion by (19)F NMR for X = CF3CO2 and by EXAFS analysis for X = Cl (r(Fe-Cl) = 2.29 A) and Br (r(Fe-Br) = 2.43 A). Density functional theory calculations yield M?ssbauer parameters and bond lengths in good agreement with the experimental data and produce excited-state energies that follow the trend observed in the ligand-field bands. Despite mitigating the high effective charge of the iron(IV) center, the substitution of the MeCN ligand with monoanionic ligands X- decreases the thermal stability of [Fe(IV)(O)(TPA)]2+ complexes. These anion-substituted complexes model the cis-X-Fe(IV)=O units proposed in the mechanisms of oxygen-activating nonheme iron enzymes.     

Toward a photochemical and thermal molecular machine: reversible ligand dissociation and binding in a ruthenium(II)-2,2'-bipyridine complex with tris(2-pyridylmethyl)amine

A Ru(II) complex having tris(2-pyridylmethl)amine (TPA) and 2,2'-bipyridine (bpy), [Ru(TPA)(bpy)]X(2) (X = ClO(4), PF(6)), exhibited a severe distortion of the coordination of the axial pyridine moiety of TPA due to steric hindrance. The complex showed interesting dissociation-binding behavior of the axial pyridine arm to form a solvent adduct with TPA ligation in a unique meridional tridentate fashion. The complex undergoes thermal dissociation to form solvent-coordinated species via an S(N)2-like mechanism with activation energy of 117 kJ/mol. In contrast, the complex showed reversible photochemical dissociation and rebinding via an S(N)1-like mechanism by MLCT irradiation. The photochemical dissociation was accelerated approximately 200-fold faster than the thermal process. The dissociation process involves selective binding behavior toward external ligands (solvents) with pi-acceptor character, which is indispensable, and no sigma-donating molecules could bind to the Ru(II) center. The guest molecule can be released upon photoirradiation after its thermal binding.     

Syntheses, characterization, and catalytic ability in alkane oxygenation of chloro(dimethyl sulfoxide)ruthenium(II) complexes with tris(2-pyridylmethyl)amine and its derivatives

New ruthenium(II) complexes having a tetradentate ligand such as tris(2-pyridylmethyl)amine (TPA), tris[2-(5-methoxycarbonyl)pyridylmethyl]amine [5-(MeOCO)3-TPA], tris(2-quinolylmethyl)amine (TQA), or bis(2-pyridylmethyl)glycinate (BPG) have been prepared. The reaction of the ligand with [RuCl2(Me2SO)4] resulted in a mixture of trans and cis isomers of the chloro(dimethyl sulfoxide-kappaS)ruthenium(II) complexes containing a TPA or a BPG, whereas a trans(Cl,N(amino)) isomer was selectively obtained for 5-(MeOCO)3-TPA and TQA. The trans and cis isomers of the [RuCl(TPA)(Me2SO)]+ complex were easily separated by fractional recrystallization. The molecular structures of trans- and cis(Cl,N(amino))-[RuCl(TPA)(Me2SO)]+ complexes and the trans(Cl,N(amino))-[RuCl{5-(MeOCO)3-TPA}(Me2SO)]+ complex have been determined by X-ray structural analyses. The reaction of TPA with [RuCl2(PhCN)4] gave a single isomer of the chloro(benzonitrile)ruthenium(II) complex, whereas the bis(benzonitrile)ruthenium(II) complex was obtained with BPG. The cis(Cl,N(amino))-[RuCl(TPA)(Me2SO)]+ complex is thermodynamically much less stable than the trans isomer and isomerizes in dimethyl sulfoxide at 65-100 degrees C. Oxygenation of alkanes catalyzed by these ruthenium(II) complexes has been examined. The chloro(dimethyl sulfoxide-kappaS)ruthenium(II) complexes with TPA and its derivatives using m-chloroperbenzoic acid as a cooxidant showed high catalytic ability. Adamantane was efficiently and selectively oxidized to give 1-adamantanol up to 88%. The chloro(dimethyl sulfoxide-kappaS)ruthenium(II) complex with 5-(MeOCO)3-TPA was found to be the most active catalyst among the complexes examined.     

Synthesis and properties of oxo-carboxylato- and dioxo-bridged diosmium complexes of tris(2-pyridylmethyl)amine

A series of oxo-bridged diosmium complexes with tpa ligand (tpa = tris(2-pyridylmethyl)amine) are synthesized. The hydrolytic reaction of the mononuclear osmium complex [Os(III)Cl(2)(tpa)]PF(6) in aqueous solution containing a sodium carboxylate yields a μ-oxo-μ-carboxylato-diosmium(III) complex, [Os(III)(2)(μ-O)(μ-RCOO)(tpa)(2)](PF(6))(3) (R = C(3)H(7) (1), CH(3) (2), or C(6)H(5) (3)). One-electron oxidation of 1 with (NH(4))(2)Ce(IV)(NO(3))(6) gives a mixed-valent [Os(III)Os(IV)(μ-O)(μ-C(3)H(7)COO)(tpa)(2)](PF(6))(4) complex (4). A mixed-valent di-μ-oxo-diosmium complex, [Os(III)Os(IV)(μ-O)(2)(tpa)(2)](PF(6))(3) (5), is also synthesized from 1 in an aerobic alkaline solution (pH 13.5). All the complexes exhibit strong absorption bands in a visible-near-infrared region based on interactions of the osmium dπ and oxygen pπ orbitals of the Os-O-Os moiety. The X-ray crystallographic analysis of 1, 3, and 4 shows that the osmium centers take a pseudo-octahedral geometry in the μ-oxo-μ-carboxylato-diosmium core. The mixed-valent osmium(III)osmium(IV) complex 4 has a shorter osmium-oxo bond and a larger osmium-oxo-osmium angle as compared with those of the diosmium(III) complex 1 having the same bridging carboxylate. Crystal structure of 5 reveals that the two osmium ions are bridged by two oxo groups to give an Os(2)(μ-O)(2) core with the significantly short osmium-osmium distance (2.51784(7) ?), which is indicative of a direct osmium-osmium bond formation with the bond order of 1.5 (σ(2)π(2)δ(2)δ*(2)π*(1) configuration). In the electrochemical studies, the μ-oxo-μ-carboxylato-diosmium(III) complexes exhibit two reversible Os(III)Os(III)/Os(III)Os(IV) and Os(III)Os(IV)/Os(IV)Os(IV) oxidation couples and one irreversible redox wave for the Os(III)Os(III)/Os(II)Os(III) couple in CH(3)CN. The irreversible reductive process becomes reversible in CH(3)CN/H(2)O (1:1 Britton-Robinson buffer; pH 5-11), where the {1H(+)/2e(-)} transfer process is indicated by the plot of the redox potentials against the pH values of the solution of 1. Thus, the μ-oxo-μ-butyrato-diosmium(III) center undergoes proton-coupled electron transfer to yield a μ-hydroxo-μ-butyrato-diosmisum(II) species. The di(μ-oxo) complex 5 exhibits one reversible Os(III)Os(IV)/Os(IV)Os(IV) oxidation process and one reversible Os(III)Os(IV)/Os(III)Os(III) reduction process in CH(3)CN. The comproportionation constants K(com) of the Os(III)Os(IV) states for the present diosmium complexes are on the order of 10(19). The values are significantly larger when compared with those of similar oxo-bridged dimetal complexes of ruthenium and rhenium.     

Structural comparison of copper(I) and copper(II) complexes with tris(2-pyridylmethyl)amine ligand

Copper(I) complexes with the tris(2-pyridylmethyl)amine (TPMA) ligand were synthesized and characterized to examine the effect of counteranions (Br(-), ClO(4)(-), and BPh(4)(-)), as well as auxiliary ligands (CH(3)CN, 4,4'-dipyridyl, and PPh(3)) on the molecular structures in both solid state and solution. Partial dissociation of one of the pyridyl arms in TPMA was not observed when small auxiliary ligands such as CH(3)CN or Br(-) were coordinated to copper(I), but was found to occur with larger ones such as PPh(3) or 4,4'-dipyridyl. All complexes were found to adopt a distorted tetrahedral geometry, with the exception of [Cu(I)(TPMA)][BPh(4)], which was found to be trigonal pyramidal because of stabilization via a long cuprophilic interaction with a bond length of 2.8323(12) ?. Copper(II) complexes with the general formula [Cu(II)(TPMA)X][Y] (X = Cl(-), Br(-) and Y = ClO(4)(-), BPh(4)(-)) were also synthesized to examine the effect of different counterions on the geometry of [Cu(II)(TPMA)X](+) cation, and were found to be isostructural with previously reported [Cu(II)(TPMA)X][X] (X = Cl(-) or Br(-)) complexes.     

Synthesis and crystal structure of nickel(II) complexes with bis(5-methyl-2-thiophenemethyl)(2-pyridylmethyl)amine

A series of nickel(II) complexes having the (Me-Tp)₂PMA ligand ((Me-Tp)₂PMA = bis(5-methyl-2-thiophenemethyl)(2-pyridylmethyl)amine) with nitrates (1), chlorides (2), and perchlorates (3) as anions were synthesized and isolated. All these complexes were successfully characterized by physicochemical methods including X-ray crystallographic analysis. In complex 1, the ligand binds in a bidentate N₂ fashion, whereas in the cases of 2 and 3 the ligand binds in the tridentate N₂S form. The coordination geometry around the nickel(II) atoms in these complexes is distorted octahedral.     

Synthesis and X-ray crystal structures of three copper(II) complexes of 1,4- bis (di-2-pyridylmethyl)phthalazine

The synthesis and X-ray crystal structures of three discrete copper(II) complexes of 1,4-bis(di-2-pyridylmethyl)phthalazine (L) are reported. The complexes 1–3 have Cu₂L, Cu₃L and Cu₂L₂ composition and display interesting relationships to previously reported complexes of this ligand.     

Synthesis of gold nanoparticles stabilized with di-(2-ethylhexyl)dithiophosphoric acid and tris(2-aminoethyl)amine

Methods for preparing gold nanoparticles (NPs) surface-stabilized with di-(2-ethylhexyl)dithiophosphoric acid (DTPA) and tris(2-aminoethyl)amine (TAEA), which endow the nanoparticles with hydrophobic and hydrophilic properties, are described. In the case of DTPA, Au-NPs are first synthesized with surfactant shells by means of reducing [AuCl₄]^? with hydrazine in inverted micelles of oxyethylated Triton N-42 in a low-polarity medium of decane; then, the micelles are destroyed by polar chloroform in the presence of DTPA, which has a great affinity to gold due to its sulfur donor atoms and substitutes for the surfactant on the surface of the nanoparticles. In preparing hydrophilic nanoparticles, [AuCl₄]^? is reduced with solid NaBH₄ directly in a nonaqueous solution of TAEA based on an ethanol and 2-propanol (3: 10) mixture. The nanoparticles are characterized by elemental analysis (for Au, C, H, N, and Na), X-ray powder diffraction, electronic absorption spectra, IR spectra, photon-correlation spectra, and transmission electron microscopy (TEM).     

Reactions of copper(II)-H2O2 adducts supported by tridentate bis(2-pyridylmethyl)amine ligands: sensitivity to solvent and variations in ligand substitution

The copper(II) complexes 1(H) and 1(Ar(X)), supported by the N,N-di(2-pyridylmethyl)benzylamine tridentate ligand (L(H)) or its derivatives having m-substituted phenyl group at the 6-position of pyridine donor groups (L(Ar(X))), have been prepared, and their reactivity toward H2O2 has been examined in detail at low temperature. Both copper(II) complexes exhibited a novel reactivity in acetone, giving 2-hydroxy-2-hydroperoxypropane (HHPP) adducts 2(H) and 2(Ar(X)), respectively. From 2(Ar(X)), an efficient aromatic ligand hydroxylation took place to give phenolate-copper(II) complexes 4(Ar(X)). Detailed spectroscopic and kinetic analyses have revealed that the reaction proceeds via an electrophilic aromatic substitution mechanism involving copper(II)-carbocation intermediates 3(Ar(X)). Theoretical studies at the density functional theory (DFT) level have strongly implicated conjugate acid/base catalysis in the O-O bond cleavage and C-O bond formation steps that take the peroxo intermediate 2(Ar(X)) to the carbocation intermediate 3(Ar(X)). In contrast to the 2(Ar(X)) cases, the HHPP-adduct 2(H) reacted to give a copper(II)-acetate complex [Cu(II)(L(H))(OAc)](ClO4) (6(H)), in which one of the oxygen atoms of the acetate co-ligand originated from H2O2. In this case, a mechanism involving a Baeyer-Villiger type 1,2-methyl shift from the HHPP-adduct and subsequent ester hydrolysis has been proposed on the basis of DFT calculations; conjugate acid/base catalysis is implicated in the 1,2-methyl shift process as well. In propionitrile, both 1(H) and 1(Ar(X)) afforded simple copper(II)-hydroperoxo complexes LCu(II)-OOH in the reaction with H2O2, demonstrating the significant solvent effect on the reaction between copper(II) complexes and H2O2.